Problems Using Logic Express with Alesis Multimix 8
Hi,
Does anybody have any experience of using the Alesis Multimix 8 USB with Logic Express 7.0.1? As far as I can tell the software is set up OK. The problem is that there is an awful amount of noise present on both the input and the output (sounds like inordinatley loud dither). The problem is also present on Garageband and iTunes but not with Cubase LE (bundled in with the Multimix).
I have searched and searched the internet for drivers for the Multimix but with no luck. At the moment I am just using the "core audio" USB codec drivers that are built in as I seem to have no other option.
Does anybody have any suggestions before I go ahead and buy another external audio interface? (got my eye on the new Behringer F-CONTROL AUDIO FCA202)
Rev. G Rock
PS I am running OS X (10.3.9) on a G4 iBook (1.33 GHz, 1.25 GB RAM) and have done all the updates available for Logic Express 7.0(.1)
iBook G4 Mac OS X (10.3.9)
OK I understand it's helpful to others to post solutions should you find them so here goes:
It would seem that the problem is with the built in CODEC used by OS X. You can update using the drivers available at http://www.usb-codec.com
I used the demo version to see if it solved the problem which it did. However you need to buy the software to get rid of the annoying beep every 30 secs on the demo version. well worth it to get my hardware working properly though.
Rev. G Rock
Similar Messages
-
I have a Mac OSX and I use Logic Express 9 on it. I also use an MBox 2 digidesign. Im having trouble connecting midi and getting it to work from my Roland Keyboard Midi, to the back of my Mbox 2 Midi. Its just not working at all. Does anyone know how to make Midi work with the Mbox 2 using Logic Express 9 on my OSX 10.6.8
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Also try turning off Bluetooth -
Can I use logic express with my Macbook
I just got a macbook and i was wondering if I can use Logic express or pro on it??
yes!
it of coourse depends what you want to do with it - but yes!
by all acounts logic express and pro will run very well on the new macbooks.
I'm using pro on my old powerbook - just about manage to use it live and it's slow but useable to get ideas down onto and am using an intel imac as my main studio computer with logic pro 7.2.3 - it's essentially the same as a macbook except it doesn't have integrated graphics and it has a faster hard disk which does make a difference. Apart from that i'm sure your new macbook would toast my powerbook in terms of performance.
Be sure to get the intel version of logic (7.2 and above) as an older "ppc" version may run but is not supported and would probably run very slowly.
Enjoy!
Rounik -
Using Logic 7 with Alesis Multimix8 Firewire...problem
Hi there,
I'm running Logic 7 on my 2GHz Macbook (White) with Snow Leopard 10.6 and an Alesis Mutlimix 8 Firewire. The problem I'm having is that I can't seem to get the playback or output to come back through the Interface. I have done all the normal things of checking the audio midi setup (both in utilities and in Logic itself) but to no avail. The signal is definitely getting from the Multimix to the computer as I can record things, but I don't seem to be getting anything coming back. I tried doing the same in thing in Garageband but got the same outcome, which makes me think its not something in Logic that I'm doing wrong. in GB, I even set the output to the built-in out put, at which point I was able to hear playback through the speakers. I've been through the logic manual and the mutlimix one but can't find anything that helps - I do everything they suggest but get nothing. Any help?!
KI am in front of an Alesis board now. If you have your monitors connected to the Main Outs, then the 2TK TO MIX Button must be depressed, and the Main Mix fader will control the level of playback.
If you have your monitors connected to the CTRL RM OUT, then only the 2 TK button should be depressed, and the Headphone/Control Rm Knob will control the level of playback.
Hope this is the problem, and it works. The nice thing about this setup is you can connect two sets of monitors and mix with either signal and quickly move between the two.
Also, I'm assuming you've updated to the latest drivers and firmware on the Alesis site. I think they've stopped updating, but if you installed a driver from a disk, I'm pretty sure it will be older than what you can download. -
Problems using airport express with both macs and a windows xp??
Hi....I have just bought a netbook and my wireless connection that I use at home is via an airport express that works brilliantly on my 2 macs however with the new netbook the connection is intermittent even though it always says its connected to my wireless network.
I am completely hopeless with pc's and just needed a netbook for occasional use but wish I new why sometimes the internet works on it on the airport network and othertimes it doesnt. I have removed all firewalls and still have the same problem.
Anyone know a solution or what may be happening as I am at a loss as to why it intermittenty works even though it always says the connection is excellent.
The macs work just fine!!
thanks in advance
robHi....I have just bought a netbook and my wireless connection that I use at home is via an airport express that works brilliantly on my 2 macs however with the new netbook the connection is intermittent even though it always says its connected to my wireless network.
I am completely hopeless with pc's and just needed a netbook for occasional use but wish I new why sometimes the internet works on it on the airport network and othertimes it doesnt. I have removed all firewalls and still have the same problem.
Anyone know a solution or what may be happening as I am at a loss as to why it intermittenty works even though it always says the connection is excellent.
The macs work just fine!!
thanks in advance
rob -
Can someone please help.Can I use Logic Express with an MBox and if so how.
Hey Roma,
welcome to the forum!
Assumming you had the drivers installed, (in Logic) go to the audio menu>audio hardware & drivers>Driver (change from built in audio to Digidesign HW (MBox), Relaunch, that's it.
((Click on (say) audio 1 (to select track) Press R to arm it and you shoud now have sound level on metters. Don't forget the I/O in logic is audio 1 = input 1, audio 2 = input 2, audio 3 = input 1, audio 4 = input 2 and so on (by default))
Kiddly regards,
Jorge -
I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!? It is very frustrating as the main reason i have bought a mac is to use logic! Any help would be great as i am a complete novice when it comes to Macs!
You're probably on OS X Lion?
I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems. -
Can you use logic express on a mac mini for recording
Can i use logic exprees on a mac mini for recording? Ive seen alot of 8,12, and 16 track recorders with a cd burner and it seems like a logical and more productive gues for me to buy a macmini for the same thing of recording and then I can uses logic express, a far better program for recording. can the mac mini handle the load of processing tracks and how much ram should I uses? thanks tim
sorry, I'd like to butt in here:
I would like to do the same thing, so I am curious about this forum and rather than starting a new one, can I get some advice on this possibility:
Mac Mini
1.83GHz Intel Core Duo
2GB 667 DDR2 SDRAM - 2x1GB
80GB Serial ATA drive
Glyph External HD 250 Gig
Mackie Onyx 1620 w/Firewire
Logic Pro 7.2
thoughts?
The most number of tracks I could see at once would be 16.
Here is something I am most curious about...
Firewire Hard drive
Firewire Interface/mixer
Firewire camera for FCP
to much firewire?
Please let me know if you have other thoughts aswell...
Shuke
thanks guys, this forum is fantastic! -
Digital outs in Logic Express with 828 or 002 rack
Can someone tell me if it is possible to use the digital ins and outs of either my MOTU 828 or DIgi 002 rack with LE? It's no where as easy as Pro tools or DP!!
Forgive my naivety... when you say "digital outs" are you talking about SPDIF? Does this mean I can't run Logic Express with an interface connected to the SPDIFs on my G5? Only Pro? Or am I off the mark?
Thanks! -
Using Logic Pro with Reason 3.0
I am trying to use logic Pro with reason 3.0. I want to be able to sync them together to use redrum within reason as my drum machine. I am using a MOTU 828 mk II audio interface with 8 in's and 8 out's.
When I start logic first and the reason I am not hearing any sound from reason. I can see the meters move in the mixer of reason but I hear nothing.
From the standard documentation that comes with Logic all I can figure out is that rewire is there to sync any other rewire program so that can run side by side of one sequences transport controls.
I want to be able to hear audio from both my arrangement in Logic and in Reason at the same time in the same song in sync.
Can someone please tell me firstly if this is possible and if so how can I implement this kind of setup.
Thanks in Advance.
amerretzCommon problem. LP doesn't rewire 'out of the box'.
There are two ways to do this (well, more, but I'll tell you 2)
1 (Easy Way):
Restart Mac (Just to be sure things are sorted, not everytime)
Launch Logic
Launch Reason
Arrange Window
Choose a Channel> Pan Left
Go to the Middle section of the Parameters on the Left
With the Channel pop up menu, select Rewire> RWMix L
Repeat for the Right and away you go.
2 (More Advanced)
Environment Window
In the Middle section of the parameters on the Left select Create
Name it Rewire
Under that windows "New" pull down (Top Left), pull down to Audio Object
In the "Channel" pop up (Left, bottom section) select>Rewire (Left, right, 3,4... What ever you want.
Double Click the Audio Object to expand it
Pan Left or right, or whatever you need.
Rename if you wish
Do the same for the other stereo sideNow's the fun part. Assign these stereo pairs to a bus (above the fader, the default is "Out 1-2")
Go to the Mixer window
Double click the Bus you assigned, this puts it in the arrange window
Arrange window
Name the Bus "Rewire" or "ReDrum" or something great like that.
Now you can use it like a stereo pair (which I wish Logic had) for automation and effects and such. -
Anyone using Logic 8 with 10.6 Snow Leopard ? issues ?
Using Logic 8 with 10.6, I'm aware there is an issue quitting Logic without first closing the current project.
Are there any other issues? any performance boost/ benefit?
I'm running an 06 Macbook Pro 17" 2 Gb Ram 10.5.8 currently and considering an upgrade to 10.6
Audio units I use: Revalver MKIII and Amplitube(blushes embarrassedly)
No, my coffee was still too hot...
There are quite a few issues running L8 and L9 with Snow Leopard. My (and also from some of the pro's here) standard answer is hold off Snow Leopard until it has stabilized a bit more. Try to wait until 10.6.4 or 5 at least. Leopard only became reasonably stable with L8 at version 10.5.4, 0-3 were problematic.
Just check this forum for user reports when SL gets updated.
Since SL was released, the number of Q's on this forum seems to have more than doubled. That is strong circumstancial evidence for SL-Logic stability/reliability problems. It may be the price to pay for the price we pay. -
How do you use Logical Expressions in the RTF?
How do you use logical expressions such as "and", "or" when you want to do conditional printing of XML data in the RTF?
For example:
if (conditionA and conditionB) then...
Regards,
SmitaThank you Sir! - I had something else wrong in the expression, but the error message I was getting was a bit misleading and sent me down the wrong path.
Thanks again, and best regards:) -
Problem using SQL Loader with ODI
Hi,
I am having problems using SQL Loader with ODI. I am trying to fill an oracle table with data from a txt file. At first I had used "File to SQL" LKM, but due to the size of the source txt file (700MB), I decided to use "File to Oracle (SQLLDR)" LKM.
The error that appears in myFile.txt.log is: "SQL*Loader-101: Invalid argument for username/password"
I think that the problem could be in the definition of the data server (Physical architecutre in topology), because I have left blank Host, user and password.
Is this the problem? What host and user should I use? With "File to SQL" works fine living this blank, but takes to much time.
Thanks in advanceI tried to use your code, but I couldn´t make it work (I don´t know Jython). I think the problem could be with the use of quotes
Here is what I wrote:
import os
retVal = os.system(r'sqlldr control=E:\Public\TXTODI\PROFITA2/Profita2Final.txt.ctl log=E:\Public\TXTODI\PROFITA2/Profita2Final.txt.log userid=MYUSER/myPassword @ mySID')
if retVal == 1 or retVal > 2:
raise 'SQLLDR failed. Please check the for details '
And the error message is:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 5, in ?
SQLLDR failed. Please check the for details
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.h.y(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source) -
Hi,
I have a question on using EJB / or RMI servers with CORBA clients using
RMI-IIOP transport, which in theory should work, but in practice has few
glitches.
Basically, I have implemented a very simple server, StockTreader, which
looks up for a symbol and returns a 'Stock' object. In the first example, I
simplified the 'Stock' object to be a mere java.lang.String, so that lookup
would simply return the 'synbol'.
Then I have implemented the above, as an RMI-IIOP server (case 1) and a
CORBA server (case 2) with respective clients, and the pair of
client-servers work fine as long as they are CORBA-to-CORBA and RMI-to-RMI.
But the problem arises when I tried using the RMI server (via IIOP) with the
CORBA client, when the client tries to narrow the object ref obtained from
the naming service into the CORBA idl defined type (StockTrader) it ends up
with a class cast exception.
This is what I did to achieve the above results:
[1] Define an RMI interface StockTrader.java (extending java.rmi.Remote)
with the method,
public String lookup( String symbol) throws RMIException;
[2] Implement the StorckTrader interface (on a PortableRemoteObject derived
class, to make it IIOP compliant), and then the server to register the stock
trader with COS Naming service as follows:
String homeName =....
StockTraderImpl trader =new StockTraderImpl();
System.out.println("binding obj <" homeName ">...");
java.util.Hashtable ht =new java.util.Hashtable();
ht.put("java.naming.factory.initial", args[2]);
ht.put("java.naming.provider.url", args[3]);
Context ctx =new InitialContext(ht);
ctx.rebind(homeName, trader);
[3] Generate the RMI-IIOP skeletons for the Implementation class,
rmic -iiop stock.StockTraderImpl
[4] generate the IDL for the RMI interface,
rmic -idl stock.StockTraderImpl
[5] Generate IDL stubs for the CORBA client,
idlj -v -fclient -emitAll StockTraderImpl.idl
[6] Write the client to use the IDL-defined stock trader,
String serverName =args[0];
String symList =args[1];
StockClient client =new StockClient();
System.out.println("init orb...");
ORB orb =ORB.init(args, null);
System.out.println("resolve init name service...");
org.omg.CORBA.Object objRef
=orb.resolve_initial_references("NameService");
NamingContext naming =NamingContextHelper.narrow(objRef);
... define a naming component etc...
org.omg.CORBA.Object obj =naming.resolve(...);
System.out.println("narrow objRef: " obj.getClass() ": " +obj);
StockTrader trader =StockTraderHelper.narrow(obj);
[7] Compile all the classes using Java 1.2.2
[8] start tnameserv (naming service), then the server to register the RMI
server obj
[9] Run the CORBA client, passing it the COSNaming service ref name (with
which the server obj is registered)
The CORBA client successfully finds the server obj ref in the naming
service, the operation StockTraderHelper.narrow() fails in the segment
below, with a class cast exception:
org.omg.CORBA.Object obj =naming.resolve(...);
StockTrader trader =StockTraderHelper.narrow(obj);
The <obj> returned by naming service turns out to be of the type;
class com.sun.rmi.iiop.CDRInputStream$1
This is of the same type when stock trader object is registered in a CORBA
server (as opposed to an RMI server), but works correctly with no casting
excpetions..
Any ideas / hints very welcome.
thanks in advance,
-hariOn the contrary... all that is being said is that we needed to provide clearer examples/documentation in the 5.1.0 release. There will be no difference between the product as found in the service pack and the product found in the 5.1.1. That is, the only substantive will be that 5.1.1 will also
include the examples.
"<=one way=>" wrote:
With reference to your and other messages, it appears that one should not
expect that WLS RMI-IIOP will work in a complex real-life system, at least
not now. In other words, support for real-life CORBA clients is not an
option in the current release of WLS.
TIA
"Eduardo Ceballos" <[email protected]> wrote in message
news:[email protected]...
We currently publish an IDL example, even though the IDL programmingmodel in Java is completely non-functional, in anticipation of the support
needs for uses who need to use IDL to talk to the Weblogic server,
generically. This example illustrates the simplest connectivity; it does not
address how
to integrate CORBA and EJB, a broad topic, fraught with peril, imo. I'llnote in passing that, to my knowledge, none of the other vendors attempt
this topic either, a point which is telling if all the less happy to hear.
For the record then, what is missing from our distribution wrt RMI-IIOPare a RMI-IIOP example, an EJB-IIOP example, an EJB-C++. In this you are
correct; better examples are forth coming.
Still, I would not call our RMI-IIOP implementation fragile. I would saythat customers have an understandably hard time accepting that the IDL
programming model is busted; busted in the sense that there are no C++
libraries to support the EJB model, and busted in the sense that there is
simply no
support in Java for an IDL interface to an EJB. Weblogic has nothing to doit being busted, although we are trying to help our customers deal with it
in productive ways.
For the moment, what there is is a RMI (over IIOP) programming model, aninherently Java to Java programming model, and true to that, we accept and
dispatch IIOP request into RMI server objects. The way I look at it is this:
it's just a protocol, like HTTP, or JRMP; it's not IDL and it has
practically nothing to do with CORBA.
ST wrote:
Eduardo,
Can you give us more details about the comment below:
I fear that as soon as the call to narrow succeeds, the remainingapplication will fail to work correctly because it is too difficult ot
use an idl client in java to work.It seems to me that Weblogic's RMI-IIOP is a very fragile
implementation. We
don't need a "HelloWorld" example, we need a concrete serious example(fully
tested and seriously documented) that works so that we can get a betteridea
on how to integrate CORBA and EJB.
Thanks,
Said
"Eduardo Ceballos" <[email protected]> wrote in message
news:[email protected]...
Please post request to the news group...
As I said, you must separate the idl related classes (class files and
java
files) from the rmi classes... in the rmic step, you must set a newtarget
(as you did), emit the java files into that directory (it's not clearyou
did this), then remove all the rmi class files from the class path... ifyou
need to compile more classes at that point, copy the java files to theidl
directly is you must, but you can not share the types in any way.
I fear that as soon as the call to narrow succeeds, the remainingapplication will fail to work correctly because it is too difficult otuse
an idl client in java to work.
Harindra Rajapakshe wrote:
Hi Eduardo,
Thanks for the help. That is the way I compiled my CORBA client, by
separating the IDL-generated stubs from the RMI ones, but still I
get a
CORBA.BAD_PARAM upon narrowing the client proxy to the interfacetype.
Here's what I did;
+ Define the RMI interfaces, in this case a StockTrader interface.
+ Implement RMI interface by extendingjavax.rmi.PortableRemoteObject
making
it IIOP compliant
+ Implemnnt an RMI server, and compile using JDK1.2.2
+ use the RMI implementation to generate CORBA idl, using RMI-IIOPplugin
utility rmic;
rmic -idl -noValueMethods -always -d idl stock.StockTraderImpl
+ generate Java mappings to the IDL generated above, using RMI-IIOPplugin
util,
idlj -v -fclient -emitAll -tf src stocks\StockTrader.idl
This creates source for the package stock and also
org.omg.CORBA.*
package, presumably IIOP type marshalling
+ compile all classes generated above using JDK1.2.2
+ Implement client (CORBA) using the classes generated above, NOTthe
RMI
proxies.
+ start RMI server, with stockTrader server obj
+ start tnameserv
+ start CORBA client
Then the client errors when trying to narrow the obj ref from the
naming
service, into the CORBA IDL defined interface using,
org.omg.CORBA.Object obj =naming.resolve(nn);
StockTrader trader =StockTraderHelper.narrow(obj); // THIS
ERRORS..!!!
throwing a CORBA.BAD_PARAM exception.
any ideas..?
Thanks in advance,
-hari
----- Original Message -----
From: Eduardo Ceballos <[email protected]>
Newsgroups: weblogic.developer.interest.rmi-iiop
To: Hari Rajapakshe <[email protected]>
Sent: Wednesday, July 26, 2000 4:38 AM
Subject: Re: problem using CORBA clients with RMI/EJBservers..!!!???
Please see the post on june 26, re Errors compiling... somewherein
there,
I suspect, you are referring to the rmi class file when you are
obliged
to
completely segregate these from the idl class files.
Hari Rajapakshe wrote:
Hi,
I have a question on using EJB / or RMI servers with CORBA
clients
using
RMI-IIOP transport, which in theory should work, but in practice
has
few
glitches.
Basically, I have implemented a very simple server,
StockTreader,
which
looks up for a symbol and returns a 'Stock' object. In the firstexample, I
simplified the 'Stock' object to be a mere java.lang.String, so
that
lookup
would simply return the 'synbol'.
Then I have implemented the above, as an RMI-IIOP server (case
1)
and a
CORBA server (case 2) with respective clients, and the pair of
client-servers work fine as long as they are CORBA-to-CORBA andRMI-to-RMI.
But the problem arises when I tried using the RMI server (via
IIOP)
with
the
CORBA client, when the client tries to narrow the object ref
obtained
from
the naming service into the CORBA idl defined type (StockTrader)
it
ends
up
with a class cast exception.
This is what I did to achieve the above results:
[1] Define an RMI interface StockTrader.java (extending
java.rmi.Remote)
with the method,
public String lookup( String symbol) throws RMIException;
[2] Implement the StorckTrader interface (on a
PortableRemoteObject
derived
class, to make it IIOP compliant), and then the server to
register
the
stock
trader with COS Naming service as follows:
String homeName =....
StockTraderImpl trader =new StockTraderImpl();
System.out.println("binding obj <" homeName ">...");
java.util.Hashtable ht =new java.util.Hashtable();
ht.put("java.naming.factory.initial", args[2]);
ht.put("java.naming.provider.url", args[3]);
Context ctx =new InitialContext(ht);
ctx.rebind(homeName, trader);
[3] Generate the RMI-IIOP skeletons for the Implementation
class,
rmic -iiop stock.StockTraderImpl
[4] generate the IDL for the RMI interface,
rmic -idl stock.StockTraderImpl
[5] Generate IDL stubs for the CORBA client,
idlj -v -fclient -emitAll StockTraderImpl.idl
[6] Write the client to use the IDL-defined stock trader,
String serverName =args[0];
String symList =args[1];
StockClient client =new StockClient();
System.out.println("init orb...");
ORB orb =ORB.init(args, null);
System.out.println("resolve init name service...");
org.omg.CORBA.Object objRef
=orb.resolve_initial_references("NameService");
NamingContext naming=NamingContextHelper.narrow(objRef);
... define a naming component etc...
org.omg.CORBA.Object obj =naming.resolve(...);
System.out.println("narrow objRef: " obj.getClass() ":"
+obj);
StockTrader trader =StockTraderHelper.narrow(obj);
[7] Compile all the classes using Java 1.2.2
[8] start tnameserv (naming service), then the server to
register
the
RMI
server obj
[9] Run the CORBA client, passing it the COSNaming service ref
name
(with
which the server obj is registered)
The CORBA client successfully finds the server obj ref in the
naming
service, the operation StockTraderHelper.narrow() fails in thesegment
below, with a class cast exception:
org.omg.CORBA.Object obj =naming.resolve(...);
StockTrader trader =StockTraderHelper.narrow(obj);
The <obj> returned by naming service turns out to be of the
type;
class com.sun.rmi.iiop.CDRInputStream$1
This is of the same type when stock trader object is registeredin a
CORBA
server (as opposed to an RMI server), but works correctly with
no
casting
excpetions..
Any ideas / hints very welcome.
thanks in advance,
-hari -
I'm using Logic 9 with a Macbook Pro. On one project I'm getting a message 'not enough processor power' and the computer stops playing
I've tried freezing all tracks but this has no effect. I've also bounced all soft synth tracks to audio, but to no avail. The computer stops playing
even at the start of the track where there is nothing but a kick drum happening.......Thank you for the suggestions.
I had previously tried all of the above but the airport/wireless thought. Unfortuneately, none of these things made a difference, including the wireless suggestion.
Currently, I am using my Mac's "cheapo" internal audio hardware (haha). I have a one year old 27-inch iMac, a good pair of bose speakers, and a polk sub. I don't believe it is an issue with my setup, considering I completely disconnected and unplugged it.
I did, however, do a little info hunting on the internal audio situation, since I was curious what is actually included, and I stumbled upon this interesting little tidbit about my model of iMac:
https://discussions.apple.com/thread/2718054?start=0&tstart=0
I had previously wondered if I was hearing my mouse in my speakers as well (not just in logic). It appears that this model of iMac may have some grounding issues, as someone later in the thread suggested purchasing and using a ground loop isolator, which seemed to fix any extra interference for them.
Ironically though, I have since opened logic, and do not seem to be encountering my previous static issue(yet).
Fingers crossed, hoping that I will not be experiencing it again. Going to purchase a ground loop isolator, and continue to mess around with logic, just to make sure it was not just an internal audio issue with my iMac.
Maybe you are looking for
-
My iPhone will no longer back up to my computer automaticall when I sync with iTunes- why
-
Broken: PS script to recursively zips files into one zip file
Hi I'd like a script which zips all files and subfolders older than a specified date. I've have spent a fair bit of time hacking with no luck. I'd greatly appreciate any help. AJ PS. This script seems to do the trick - $folder = "C:\temp2\" $zipFi
-
Apple TV not showing up in device list
I just got a new iMac and had everything trasfer over to it from my old MacMini. Now Apple TV will not show up in the iMac's iTunes' device list.
-
Design Suggestion required in handling a scenario with three systems.
Hi All, Here is my scenario. Legacy(Sync)->PIAsync->CRM-Async>PI--Async->BI 1. Legacy will send synchronous message to PI. 2. PI will send response back to Legacy with simple message "OK Status". 3. PI will map the Request message to CRM Idoc and sen
-
Hi All, We are in process of implementing ChaRM. Currently we have a 5 system landscape for Rollout and ongoing production. Also currently we have multiple Rollouts going on and we are using SolMan for all config and other activities. The current tra