Problems using Migration Assistant from Tiger to Snow Leopard

I want to scavenge files and apps from a Power Mac G4 (PowerMac3,5) running Tiger 10.4.11 before I turn it out to pasture. Most of them were migrated years ago to another system and have been updated and upgraded over the years, but a few apps have no modern equivalent. Now I want to do one last "pull" to pick up anything left behind all those years ago, particularly apps for which the install discs are in deep storage at best and possibly discarded.
I'm trying to use Migration Assistant in a nearly virgin Snow Leopard 10.6.8 system (installed fresh from 10.6.3 retail optical disc, updated over the network, lightly tested). It has a single admin account, no other user accounts.
Possible complicating factors: the Snow Leopard system is Server running under Parallels 10.1.4 on Yosemite 10.10.2 on an Early 2008 Mac Pro (MacPro3,1) with third-party USB3 controller in a PCI slot.
At present, I'm using a portable drive with both FW and USB interfaces as an intermediate storage (FW on the G4 to clone the system drive, USB on the Mac Pro to connect it to the virtual machine). SL sees the drive just fine, can copy files from it, and can even run apps from it. Migration Assistant sees the drive and offers to migrate from it.
Two problems:
1. No matter what user(s) I select for migration, Migration Assistant tells me it is a duplicate account. Proposing an account name never used before does not help. As a result, no user files can be migrated. (Obviously, I could copy them in other ways, but I think MA should do a more thorough job.)
2. Migration Assistant offers to migrate absolutely no applications. Even applications that SL will run from the drive cannot be migrated. (Some are PPC apps, but SL will run them via Rosetta. Others are Universal apps.)
Am I expecting too much of Migration Assistant?
Is the Migration Assistant shipped with SL Server (and updated through Software Update) not capable of running under SL Server?
Should SL MA refuse to migrate any applications from a Power Mac, even Universal applications?
Am I missing something obvious?
Is there key information I have omitted?

markwmsn wrote:
...It's not the twenty bucks, it's the principle of the thing.
Not sure what you meant by that statement. Although this "principle" may be more important to you than the twenty bucks, I know that my time is worth more to me than your twenty bucks!
What apps are you using?
markwmsn wrote:
I was able to install Snow Leopard (client) in a partition, and it was able to migrate users and many applications from the G4 clone on the portable drive. Some of the apps even run.
Then I went back to my SL Server virtual machine and tried to migrate FROM the SL client partition. Migration Assistant showed the same symptoms as importing from the clone directly (no apps offered, bogus "dup user" errors). I am forced to conclude that either (a) Migration Assistant 3.0.4/1.1 is broken when run on SL Server or (b) my new SL Server installation is broken. I'm either going to have to boot back and forth to run the old apps or find their installation media and reinstall them in my SL Server virtual machine.
Even worse, I realized that one of the antique programs I still haven't dug everything out of is a Classic application that had to be kludged to survive Y2K!
Thanks again, MIchaelLAX.
Anybody else have any clever ideas?
So, glad to see that Migration Assistant did work for you in Snow Leopard...
More clever ideas:
Install Snow Leopard client in Parallels and use its Migration Assistant:
http://forums.macrumors.com/showthread.php?t=1365439
Here is a recent post I assembled for running Classic apps on Intel Macs:
With the newer Intel Macs, you have to run a Classic emulator such as SheepShaver, which requires you to extract the Mac ROMs from your older Classic Mac and then install Mac OS 9.
A related program is Chubby Bunny, which comes bundled with all of that included (google the term "Classic-On-Intel v 4.0.1 chubby bunny").
More information on SheepShaver:
http://www.emaculation.com/doku.php/sheepshaver_mac_os_x_setup
and
http://www.everymac.com/mac-answers/mac-os-9-classic-support-faq/run-macos-9-on- intel-macs.html
and more information about Chubby Bunny:
http://www.macwindows.com/OS9_on_Intel_Mac.html#092408b
and
http://hackthemac.blogspot.co.uk/2008/08/chubby-bunny-old-virtual-machine.html
Here is the Classic CD-ROM version of RISK II running in SheepShaver on my Lion Mac Mini:
[click on image to enlarge]

Similar Messages

Can I use migration assistant from a mac with leopard to a mac with tiger?

My old mac was upgraded to leopard, (don't ask me why), and I just got a new mac with tiger, although I ordered leopard up to date. Can I use migration assistant to move stuff from the old mac with leopard to the new mac with tiger, or do I have to wait until I get the copy of leopard? Plus, if I move files over now- like through email and/or network connection, and then when I get leopard and archive and install, what happens to my files?

That is correct. You'll need either an ethernet cable or a firwire cable and a firewire to thunderbolt adapter to connect the two macs together. Here's info on Migration/Setup assistant
http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_US

I have new hard drive, should I use migration assistant before I install Snow Leopard or install Snow Leopard first?

I just had a new hard drive installed after a hard drive failure. I need to install Snow Leopard, Lion and VMware Fusion. Should I use migration assistant to reinstall my old files and applications first or should I install the new Operating Systems first? Some of the old files do have corrupt data and I will have to pick and choose what back-up files I re-install.

Pondini wrote:
memalyn wrote:
Some files were backed up on another external drive but not all.
How was that done? Drag & drop? An app like CarbonCopyCloner or SuperDuper?
Initially files were backed up on the iMac with Time Machine. I purchased a My Book external hard drive and after doing a full back up on it, I began doing all of my incremental back ups on it using Time Machine. Sometime later, I purchased a Western Digital external hard drive that included back up software on it called "WD Back-up" so I could use it to store all of my Music and Audiobooks on to keep my iMac and My Book free of those file types. The WD Backup software allowed me to pick and choose what files I wanted to back-up. I don't think I had been backing up Music and Audiobooks on the Mac anyway or maybe I was, I don't remember if I can selectively pick and choose files with Time Machine - I have not checked as I have not yet plugged it into my new hard drive. Once The My Book drive became full with regular back ups, around June or so I had to switch over to the WD Back up drive. I recall that I was very concerned that I could not do a full back up on the WD drive because if I did, I would have to reformat the drive and I did not want to do that, so I think I was able to selectively back up some additional files from my iMac but again, I do not know for sure since I have not looked at what is on the drive. I do know that if I was able to back up additional files I had to do it with WD Back up and not Time Machine, if that matters.
I know that the files in the partitioned drive and files associated with VMware Fusion are damaged. If I do a full restore, it will restore the VMware Fusion app and partioned drive
We need some clarification:
Do you mean there were 2 partitions on your internal HD? If so, how was the second one formatted? Was it backed-up?
No, there was only one partitioned drive. The way I understand it is the VMware Fusion software does the partitioning and the app resides on the Mac. After that was done, I then installed the Windows software on the partitioned drive. There is a critical file on the Mac under a Folder called Virtual Machines and in the Virtual Machines folder, the "Windows Bundle" or some such thing keeps locking each time the software crashes due to the problem files somewhere within the files in the VMware Fusion software that (I think resides) in the Windows environment that I cannot access. The Virtual Machine file on the Mac gets backed up so the Windows Bundles files get backed up and that includes all the screen shots (essentially backups) of the Windows environment. The Windows environment includes some of the apps and their data in Windows such as Quicken. Theoretically, the partitioned drive does not get backed up but in reality if the screen shots do, some of the partitioned drive does - corrupt or not. If you have a Quicken file open and a drop down screen in Quicken frozen when the system crashes, that is what gets backed up and there is no way you can get back into Windows or Quicken.
               If I do a full restore, it will restore the VMware Fusion app
If you restore an OSX volume, yes, that will restore all apps, but that's not necessarily bad. If necessary or desired, you can always delete or reinstall a suspect app. That way, all your other apps will be ok. For most users, reinstalling all apps is a considerable project. See Transferring Applications for an explanation.
Well, that is true. To reinstall VMware Fusion, Windows and Quicken would much, much easier than all of the Mac software I have. Plus, the VMware Fusion version I have is not compatible with Lion and my goal is to install Lion, so I will have to upgrade VMware Fusion no matter what. Further, I'm so aggravated with the dual operating system, I've been looking at products to replace Quicken, so if anyone knows of a good home, small business and home rental financial product they can recommend, I'm all ears!
               If I do a full restore, it will restore . . . and partioned drive
If there are 2 partitons, a full restore only restores the OSX partition. If a non-OSX partition was backed-up, it must be restored separately.
               Now that I've said I only have 1 partitioned drive, does that mean it will restore the partitioned drive? I would prefer it did not. It seems now that it would be much cleaner to restore the OSX drive. Would I be able to do that?
So, depending on the exact circumstances, your best be may be to restore the most recent OSX partition, then restore/copy those files that were backed-up on another drive; reinstall VMware if necessary; restore the other partition.
So . . . things may be a bit more complex than we though, but perhaps less dire.
More detail on the various partitions and backups should clarify things.

New Mac! Migrating issue from Tiger to Snow Leopard

I recently bought a new MacBook Pro 15" before I relocated overseas (because I couldn't live without a Mac while I waited for my iMac to be shipped abroad).
During the initial set-up, I used the migration assistant to transfer everything from my iMac (running 10.4) to the MacBook Pro (running 10.6). As expected, the transfer worked perfectly!
Actually, it worked a bit too perfectly because the MacBook Pro now seems to think it is called 'Geoffrey Sharpe's iMac G5'. To make matters worse, I am not yet able to connect to the internet from my apartment so I am writing this from the PC at work.
Is there an account setting somewhere that I will need to change?

Geoff, how did you go about the migration? Did you simply connect the two Macs, open the MBP and follow the initial prompts to 'Migrate From Another Mac'?
Or did you use the Snow Leopard DVD and perform a "Restore System from Backup..."? If so, not necessarily a good idea when you are moving from one Mac to another. See the following:
Mac OS X v10.6: Issues after restoring a Mac from a Time Machine backup made with a different Mac
http://support.apple.com/kb/TS3243
Your initial Restore/Migration approach will determine which direction resolving this issue will take. So let us know by answering the questions above. The fact that it thinks it is your iMac points to the possibility that you performed a "Restore System from Backup..." and not a simply migration of your user data and apps.

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If th

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If this is recommended, I would need complete instructions on doing this. I have there serial number for the product.

using migration assistant is problematic.
at this point yes, you should uninstall everything migrated, clean and then reinstall properly using the installation files.
cleaner: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
installation files:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Migration from tiger to snow leopard problem on iMac

I got
Import Error
The doc is encrypted and can't be opened
error when opening a previous password protected spreadsheet with .xls file extenstion after migrating from tiger to snow leopard (10.6.3) on my iMac. Any help is appreciated. Maybe there is other thread talking about this already?

This is an error message from Numbers trying to open password protect Excel files, which it cannot do. Assuming you have Excel, use Excel to open it.

HT4889 Problems with migration assistant from 2010 MBP to Retina Display MBP using ethernet

I am trying to use migration assistant from my 2010 MBP to my Retina Display MBP using ethernet (with thunderbolt adapter) however it can not find the computer. It only finds it over wifi. I have updated all my software on monutain lion. Can anyone help?

I know I am not answering your question but I would try to use FW800.
I imagine the 2010 MBP does not have TB or it whould be better a TB direct connection.
Last try: have you managed to use migration assistant "both ways" ? I mean you can manage to use it from each of the 2 connected Macs.

What problems are associated with an upgrade from Tiger to Snow Leopard?

Hi folks.
Is it possible to upgrade directly from Tiger to Snow Leopard, without having to buy Leopard? I've seen many answers around the web, many of them conflicting. There appear to be possible associated problems if you bypass Leopard. But as I'm not certain that what I read is correct I thought I'd come straight to the Community and ask.
Thanks in advance.
(Only reason I'm asking is I persuaded my mother to buy her first Mac (second hand) and it has Tiger loaded onto it. I'd like her to have a more up to date software.)

The computer has to be an Intel Mac.
The basic requirements for Snow Leopard are as follows:
An Apple computer with an Intel Processor
1GB of Memory (RAM)
5GB of hard drive space (Storage)
DVD drive for installation
You can go directly from Tiger to Snow.
Possible problems: make sure the current third party Tiger apps will be compatible. 1 GB RAM is bare bones. You want more than that.
Before upgrading make sure you have the current Mac configuration backed up completely. Use a cloning program like Carbon Copy Cloner to make a bootable clone on an external drive.
http://www.bombich.com/
Message was edited by: WZZZ

Problems with Aperture after upgrading from Tiger to Snow Leopard

Help! I recently upgraded my IMac operating system from Tiger to Snow Leopard. Now, I am finding my aperture is not responding the way it used to. I cannot change the border dimensions; I can't print. Any suggestions would be appreciated. I was told by Apple Technical Support that they will not provide support for Aperture 2 and that I would have to upgrade to Aperture 3. Is this correct?

This is called a Kernel panic.
See here for possible solutions:
http://support.apple.com/kb/TS3742
Did you do anything else apart from ungrading OS?
Did you add memory?
Bad or not well seated memory modules are often a cause of kernel panic

Upgraded from Tiger to Snow Leopard - now have problems with basic apps?

I have a 2007 iMac (5.1, 2007) dual core. It's capable of running Snow Leopard and Lion (but not, I believe ML).
I just bought the upgrade SL discs from Apple and installed them as an upgrade, moving up to 10.6.3 (from the discs). After running software update I'm now on 10.6.8.
Since upgrading I've successfully run Time Machine. However I have the following problems:-
A bunch of emails were present in the Inbox, but contained no body text - just the subject line. I have managed to since find most of them successfully from TM. This is a minor annoyance but I thought I'd mention it.
ITunes won't boot up. It booted the first time I tried it, but since then the little icon just bounces up and down.
Certain apps won't quit properly. I quit from the top menu, but the little blue light remains under the icon in the dock. I then have to 'Force Quit - Application Not Responding' *every time*.
Safari frequently won't load up bookmarked or seach pages, the progress bar gets stuck part way across and I stare at the rainbow pinwheel for ages, before having to quit, then Force Quit, then restart Safari and try again.
Now, I'm tempted to do a Clean Install, but after four international moves (Singapore-Australia-UK-Canada) I no longer have any of the original discs, and thus as I understand it will lose iLife. And iLife 11 needs Lion.
I've done a disc permissions repair thing via the Mac Disc Utility. I've run a few clean-up operations via Onyx.
Any suggestions gratefully received. My Mac as been running great for years, but this upgrade has been extremely disappointing thus far.
thanks
Feargus

Hi baltwo
Many thanks for your advice. I've read all the links and will be buying a 2nd external HD to do a SuperDuper back up. I already had a 1Tb drive with Maxtor back up on it, and I also managed to get a Time Machine back up as well, so at least my data should be safe.
Qn - If I back up the System and Utility folders as well as the Home folder, I don't suppose I can restore them after an install and everything (eg iLife) will 'just work'?
Anyway, I went straight from Tiger to Snow Leopard. I don't have any Tiger discs either (see reasons above) so now have no way of restoring original set up. I tried to boot from the SL install CD and then hold 'C' but must be getting something wrong as I don't get the Disk Utility pop up. It just boots as normal to the desktop.
Anyway, via the normal Disc Utitlity I've done a Repair Permissions again with no major issues. However, my Onyx software now won't run at all so I can't clean any caches a second time.
I've contacted the Apple rep who sold be the SL discs but she's not got back to me yet re iLife.
This weekend I'm going to try a fresh upgrade. If that fails I'll try Erase and Install, if I can get the 'C' button timing right. I'll update if I have any successs.
cheers
f

HT4889 I just transferred data using migration assistant from a macbook prop to a macbook. I am trying to log back into the user that was on the pro but is now on the macbook with the same password as before, and it says my password is incorrect.

I just transferred data using migration assistant from a macbook pro to a macbook. I am trying to log back into the user that was on the pro but is now on the macbook with the same password as before, and it says my password is incorrect?

Suggest you try the password for the Macbook, not the previous one.

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Mach

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

http://support.apple.com/kb/TS2986

How to use Migration Assistant from OS 10.7.5 mac to new mac Maverick?

Got a new imac. I'm trying to use Migration assistant from my non-Maverick imac to the new one. I'm told that I have to update my former mac, but it's too old to update to Maverick.
So, how can I use Migration Assitant to transfer files?
Thank you.

The easiest method is to use the Time Machine backup from your old computer and connect it to the new machine. Then launch Migration Assistant on the new machine and use the TM backup HD to migrate to the new machine. DO NOT do this wirelessly, your profile indicates you have a Time Capsule, if you use that for your TM backup then connect it via eithernet to your new iMac to do the migration.

How can i use migration assistant from a Power PC G4 powerbook?

How can i use migration assistant from a Power PC G4 laptop that can't run 10.5 to a new mini running Lion? Mini's MA says I have to upgrade the laptop's MA but the upgrade requires 10.5 as a minimum
help,please
jan

That is correct. You'll need either an ethernet cable or a firwire cable and a firewire to thunderbolt adapter to connect the two macs together. Here's info on Migration/Setup assistant
http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_US

Can u use Migration assistant from 10.5.8 to 10.7.2?

My new MacPro is OS X 10.7.2 and my old one is 10.5.8. Migration assistant does not work either from eithernet hookup or Firewire 800. Is there a software patch or update for either box to allow migration from Old OsX 10.5.8 to 10.7.2?

Yes, but you must use Migration Assistant from the new computer and boot the old computer into Target Disk Mode - Transferring files between two computers using FireWire.
Mac OS X 10.7 Help- Transferring files between two computers using target disk mode
How to use and troubleshoot FireWire target disk mode
OS X Lion- How to use Migration Assistant to transfer files from another Mac
Migration Assistant tips and tricks

Problems using Migration Assistant from Tiger to Snow Leopard

Similar Messages

Maybe you are looking for