Problems using SIP and internet phone of E61 after...

I recently bought a nokia e61 and I really like all the functions it has that comes with it at the beginning. My cellphone was first loaded with firmware V.2.06 when it first arrived and I was able to use SIP internet phone via WLAN very well.
After that, I upgraded the firmware to V 3.06. All other functions seem to be working as before except the SIP internet telephone calling.
First, I noticed that the internet telephone application is not added where I do not seem to get what it is supposed to do. This application is called "internet tele." and it is in installation group with V 3.06 firmware. I remember that this function used to be in connect. for the firmware V.2.06.
It seems that thi application is supposed to help find out the available WLAN before connecting to SIP proxy. I kept all SIP setting the same as before and, when I tried to do internet call (put in number, hit option, and choose internet call), the call does not seem to go through. It just got stuck there and never give me any sound back. I don't think it is the problem of internet access because I can still use internet properly via the web module.
Any thoughts whould be appreciated.

Just an opinion... You can try another way, use Fring! It gives SIP with pre - definitions for several VOIP providers.

Similar Messages

X5800 how to use SIP and VOIP

Hello, I have a X5800 music, model 5800d-1 and I can enter all the necessary SIP data. I get the message (settings, connectivity, admin settings, sip settings) registered which is fine. My provider is freephonie. Question: 1) Although on the freebox the SIP is activated, I don't receive incoming call on my nokia. 2) How do I tell my nokia to call on the internet ? Is it possible only using SIP tel numbers which I can enter in the contacts list? Help much appreciated. Pierre.

SIP and VoIP are not synonymous. VoIP can indeed use SIP (and often does), but other services, such as video sharing for example, also use SIP.
It so happens that the 5800 has no native support for VoIP, which is why you can't make SIP calls using it.
Your only solution for SIP is to use third-party services such as fring, for example. Once logged into your fring account you can subscribe to a SIP service. Fring's systems will register to the SIP account and relay the comminucation through your fring account. There's lag and the audio quality isn't as good as a direct SIP connection but at least it works.
The alternative is to use a phone that supports VoIP/SIP natively.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

I purchased a used iphone4 and the phone displays the previous owners apple id and prompts me for the previous owners password. how do i get rid of his info....and install my own apple id number?

I purchased a used iphone4 and the phone displays the previous owners apple id and prompts me for the previous owners password. how do i get rid of his info....and install my own apple id number?

Login to the app store with YOUR ID. You can't use the app store without an Apple ID. If there are apps on the phone that were purchased with the original owners ID, you do NOT own them. The owner had no legal right to give them to you and they are permanently tied to the ID that was used to purchase them.
...i was also allowed to purchase an apple network id for this phone...
I have absolutely NO IDEA what you mean by that. You can not "purchase an apple network id".

My SIP baed Internet phone is stop working

hi all,
It would be great if someone give me an insight of this problem. Two days ago, Signaling/Registration of phone were failed. I thought Verizon might apply some Access-list rules for SIP related traffic. i try to change port fowording/dmz and all other stuff. but so far no luck.
So, My question is that does Verizon really decide to block SIP traffic??? this is real pain.
Could you anyone know how to make this work, please share something for me.
Btw, how to check port connectivity for UDP 5060, 20000-60000?
thanks

Satellite wrote:
I have same problem since around June 22...I'm using internet phone which using 5060, 20000-60000 port with actiontec M1424WR router. Since then, internet is fine but my phone is not working.
I tried port forwarding/DMZ but nothing helped.
I checked some routes...
Tracing route to lgdacom.net [210.124.165.161]
1 2 ms <1 ms <1 ms Wireless_Broadband_Router.home [192.168.1.1]
2 10 ms 7 ms 9 ms L100.BLTMMD-VFTTP-41.verizon-gni.net [173.64.116.1]
3 18 ms 18 ms 18 ms G0-5-0-6.BLTMMD-LCR-21.verizon-gni.net [130.81.109.186]
4 20 ms 18 ms 19 ms ae4-0.RES-BB-RTR1.verizon-gni.net [130.81.209.230]
5 88 ms 87 ms 87 ms 0.so-7-0-1.XL4.LAX15.ALTER.NET [152.63.1.242]
#1 is ok which is my router, but the problem is #2 and #3...port 5060 closed...
>nmap -sU -p 5060 173.64.116.1
Nmap scan report for L100.BLTMMD-VFTTP-41.verizon-gni.net (173.64.116.1)
Host is up (0.013s latency).
PORT STATE SERVICE
5060/udp closed sip
Any help?
Has your phone traffic always needed to go to South Korea (looks like it's going to Seoul)? Even with latency that high, SIP should work fine assuming there isn't a latency enforcement. As an FYI, a port check tool won't work unless you're hosting a SIP server from your home. Your computer uses an ephemeral port (a random port from ~port 30,000 to 65535) to connect to the server on the other end, with the SIP port that is actually open.
Also, Verizon's core routers won't have ports open, since they are not actually running services themselves. Internally they'll have something but you shouldn't be able to reach any of that.
One consideration is to try disabling your IGMP proxy in the router. For as silly as it seems, this seems to have been fixing a ton of issues lately. Also, just double check to make sure your router's Firewall is not enabled or set too high. You can also try disabling SIP ALG if there is an "ALG" section in the FiOS router. For the IGMP Proxy, check this link out: http://192.168.1.1/index.cgi?active_page=6059
You will need to log into the above link using your router's username of admin, and the serial number as the password unelss you've changed it.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Use of Futiro Internet phone

Hello,
I recently bought the Futiro internet phone for my laptop for use with Skype.
I had the Futiro program installed and actually used the phone once the other day.
Now I try again and i can not seem to get Futiro up and started.
I get this msg stating "unknown program changing settings"
Anyone know how I can get my Futiro phone working?
rk

You have been misinformed. If you have the Skype client installed on multiple computers and running simultaneously then it will ring on all machines simultaneously (minus a possible ringing delay between devices). I have it running daily on at least 4+ computers and it works in this fashion.
The only time rings are missed is if I just get off a Skype call on my computer/device and the client doesn't reset itself fast enough before a new call comes in. If that is the case, the Skype clients that were not busy, continue to ring and the computer I was just using will only catch future calls. This can happen a lot if you end up playing phone tag.
Be aware that sometimes the ringing won't stop on other devices when you pick up the call because you caught the call very late. If that happens canceling the call (decline or pickup/hang-up) on those other devices will usually solve the problem.

Problem with ACE and Internet Explorer 8

I have a problem with ACE (system A2(1.1)) and Internet Explorer 8.
exactly:
ACE is configured as end-to-end ssl with 2 rserver and with the sticky source address. When user is opening the virtual address from IEv7, the web portal (On Microsoft IIS) works fine.
If user opens the same web portal but using IEv8, the session is suspended after 60 seconds.
I think, that the reason is http keep-allive, which is sending every 60 seconds from the user's internet browser.
Here is some information about this. http://en.wikipedia.org/wiki/HTTP_persistent_connection
Do you have any idea how to resolve this problem: upgrade ACE, change the configuration on IIS or ACE ??
Please help.

Hi Kazik,
Using a persistent connection or HTTP keepalives should not have any negative effect on the ACE, so, giving you a straight-forward answer to fix it is not going to be easy.
I would recommend you to open a TAC case to have this investigated further. When you do, please, provide the following data:
A showtech from the Admin context of the ACE
A traffic capture taken on the TenGig interface connecting the switch with the ACE backplane while doing a test connection (preferably one with IE7 and one with IE8 to compare)
If possible, a copy of the SSL private key. Being able to decrypt the traffic capture to look inside the HTTP flow would really make troubleshooting much easier.
Regards
Daniel

Problems using Hotmail and Twitter in Firefox

I'm having problems using both Hotmail and Twitter in Firefox (and Google Chrome) but they both seem to work fine in Internet Explorer. I can log-in to both sites but in Hotmail the drop-down menus and links don't work, and in Twitter the stream does not appear at all.
I've tried everything: deleted cache, history, cookies, disabled add-ons etc... I've also tried re-installing both new and older versions of Firefox and I've still had no joy. If anybody has any ideas for a fix I'd really appreciate it. I can't stand using IE but I am forced to at the moment.

My problem with Firefox & yahoo seems similar - so you are not alone.

Any problem using bseg and bkpf tables

For fico details i using bseg and bkpf tables.
I noted that programming is very difficult because of these tables are cluster table.
plz give me other tables
if i using these tables any problem will come?

>
mysvijai197715 wrote:
> Hi Aniesh,
>
> BSEG and BKPF are cluster tables. It contains transperant tables like BSIS, BSIK etc. For example to take vendor details usr the BSIK.If you use BSEG and BKPF it will take long time search. suppose your concern having lot of data means may be your server will get shutdown. So use only trasnperant tables like BSIS, BSIK etc.
>
>
> Regards
> R.Vijai
Incorrect. BKPF is a transparent table and not a cluster table and you can use it just like any other transparent table. BSEG is a cluster table but there is no problem selecting from it so long as you use the key of BUKRS, BELNR, GJAHR - unless you are selecting a very large amount of data, but then this can cause problems when selecting from any type of table.
The advantage of using BSEG over the other FI line item tables such as BSIS and BSIK is that it holds all the lines of an FI document while the others will hold only a subset eg BSIK will only hold lines that contain a vendor reference and BSAS holds only cleared GL account lines. Though you can only use it when you have the key. If you need to search on vendor, you can use BSIK as a starting point, but since I usually need to get hold of all the lines on an FI document, I then have to select from BSEG anyway.

Color palette problems using Toolbar and ImageList ActiveX Controls

I'm using Toolbar and ImageList ActiveX controls to implement toolbar functionality in a top-level VI.
I designed the icons used in the toolbar with a 256 color palette. When I initially added the icon images to the ImageList control and ran the VI, the icons were properly displayed in the toolbar, as expected. After saving VI, exiting LabVIEW, and reloading, it appears that a different palette has been applied to the images in the ImageList control. I'm attaching a screenshot of the problem as well.
Has anyone encountered this type of problem before? Any suggestions you provide will be greatly appreciated.
Thanks,
Zach
Software Engineer
OnWafer Technologies, Inc.
www.onwafer.com
Attachments:
icon.zip ‏3 KB

I'm using Toolbar and ImageList ActiveX controls to implement toolbar functionality in a top-level VI.
I designed the icons used in the toolbar with a 256 color palette. When I initially added the icon images to the ImageList control and ran the VI, the icons were properly displayed in the toolbar, as expected. After saving VI, exiting LabVIEW, and reloading, it appears that a different palette has been applied to the images in the ImageList control. I'm attaching a screenshot of the problem as well.
Has anyone encountered this type of problem before? Any suggestions you provide will be greatly appreciated.
Thanks,
Zach
Software Engineer
OnWafer Technologies, Inc.
www.onwafer.com
Attachments:
icon.zip ‏3 KB

I have problems with symbols and my phone ringing

I have had my nokia 5800 express music since may 2009 and have had a few minor problems but they usually clear thereselves up but now when i recieve a text it no longer rings or shows up on my phone i dont even get the message symbol at the the top of my screen all i get is my notification light flashing and have to go into texts to see what it is. I have read a whole lot of the problems and no one seems to be having this problem i phoned up nokia care and they were busy and i dont know how to fix it and it is really annoying me.

Try a reset.
Factory settings reset. In standby, dial *#7780# and the phone's lock code (the Nokia's default lock code is 12345). This reset restores phone's original settings.
Soft reset. In standby dial *#7370# and the phone's lock code.
Warning!Soft reset deletes all your phone's data, so backup your stuff before you do a soft reset!
Hard reset. Turn off the phone. Press and hold three keys together, the green key, the '*' key and the number '3'.Then, turn on the phone and don't let the three keys before you see the Nokia hands logo.
For 5800 XM hard reset need different keys. The green key, the red key and the camera button. The process is the same.Warning!Hard reset deletes all your phone's data!
And, for N97 go to /discussions/board/message?board.id=smartphones&message.id=158831&query.id=591236#M158831
If you want to thank someone, just click on the blue star at the bottom of their post

BUG? JDev 10.1.3.1.0 on MacBook Pro - problem using space and delete keys

Is anyone using JDev 10.1.3.1.0 production release on a Macbook Pro? I am experiencing problems using the delete and space keys. The delete key no longer seems to work at all when using any of the key bindings including Default MacOS X. Using the spacebar also seems to have a conflict with the code completion feature. I am finding that the code completion always pops up when the space bar is used and no space is inserted with the editor. The space bar only works when used in conjuction with the shift key. Can anyone verify if they are able to use these keys in JDeveloper 10.1.3.1.0 on a Macbook Pro?
Thanks,
Richard

This was from the dmg file.
I found that in Preferences | Accelerators, Completion Insight lists 'Space' as an accelerator, right after 'CommandAIC'. Removing that fixed the problem, but I still can't fix the Delete issue.
The Delete action is assigned to the 'Delete' key, which is recognizes as the key combination fn-Delete. I tried to assign the Delete Previous Char to just the delete key, but pressing the Delete key while in the New Accelerator field is not recognized - it just pretends as if I had not pressed a key.
I'm looking at the the file:
jdevhome/system/oracle.jdeveloper.10.1.3.39.84/Default_macosx.kdf
trying to find entries for Delete and they are not in there - is there some other place I should be looking?
Thanks,
--ee

Problems using MAX and PXI 8186 RT

Hi all !
I'm facing to problems using MAX
1) We have a 1GB switch in order to connect my PXI 8186 RT controller and the host PC, when i use this switch, and i try to access the cards plugged in the PXI card with MAX, MAX crash! When i use a 10/100 Mb switch everything is ok, i can access to the card without any problem ! I know the PXI 8186 controller is only fitted with a 10/100 Mb Ethernet card, but i think that must not be a problem , am i wrong ? Is this problem a known bug ??
2) I want to install all software used by my application on the host computer (in order to be able to reinstall the PXI8186 controller in case of a crash)! To do that i installed MAX 3.1.1, then all drivers NI-DAQmx 7.4, CAN2.2, VISA 3.3, and finally Labview RT 7.1 Embedded on my gost computer! After that i tried to download these software in the controller using MAX! The problem is these software are on the host computer (there are visible in system/ software) , but when i try to install them on the controller, max don't see them ! I tried to uninstall and re-install all software but no changes ... Is there a procedure or an order to install all these software ??? What should i do ???

Hello,
The process to install software on RT controller is :
1/ Install LabVIEW Real-Time 7.1 on your host computer
2/ Install all driveres you need on your RT target
3/ On your host machine, in MAX, go to "remote targets"
4/ Expand "Software"
5/ Clik on "Install" button.
This application note will give you more details about above process.
Our controller is only provided with 10/100 MB network device. You have to check if you can configure your 1GB switch into 10/100 MB.
Regards,
Isabelle
Ingénieur d'applications
National Instruments France

USB hub and internet sharing stop working after sleep

Hi,
I have a relatively new Bluestork USB hub I purchased to connect multiple USB devices I have at the same time. It used to work correctly under Leopard, but now it stops working each time the computer wakes up from sleep. I have to restart the computer for it to start working again. Both link and power LEDs stay on, even when the hub is not recognized.
My second problem is related to internet sharing. It stops working after each sleep/wakeup cycle and the only way to make it work again is to restart the computer. It used to work correctly before Snow Leopard as well.
I have all the Mac updates installed.

Thanks Barry.
The hub is on its way to the manufacturer for after sales service...
But the issue with AirPort remains the same, even after resetting SMC.
Some clarification:
* It happens just after computer wakes up from sleep. Restarting solves the problem and the issue doesn't arise until computer goes standby again.
* The whole WiFi card becomes unresponsive. It is not only the Turn Off button, but the whole functionality is stopped. The card can not be activated/deactivated and it doesn't connect to any network. If it is used for internet sharing, clients are unable to connect.

Can't use video and square feature in camera after IOS7 update

After updating IOS7 update i'm unable to use video and square feature in camera. when i click on these button, they don't get start.

You are most welcome

Having a problem with iTunes and internet radio. The programme keeps changing stations

I'm abroad at present and using a wireless connection at the lab. Itunes keeps changing internet radio stations as a function of time,
Any suggestions or os it a known problem with the current version?
Don

Try the following user tip:
"Invalid drive X:\" install errors

Problems using SIP and internet phone of E61 after...

Similar Messages

Maybe you are looking for