Problems using Sony ECM DS70P Microphone with Vado HD 3rd gen

Problems using Sony ECM DS70P Microphone with Vado HD 3rd genXHello.
I have just purchased a Vado HD 3rd gen & was looking forward to using my Sony ECM DS70p Microphone,but after a couple of tests, the recording is extremely low & barley laudable.
The Microphone works fine on My Kodak Zi8.
Is there an internal setting I have to adjust, or is there a fault with the Vado
The Sony ECM DS70pMicrophone can be clearly seen in use here on a official Creative video.
http://www.youtube.com/watchv=oixLDAmc5qw
If anybody can offer some help or advice please, I would be very grateful.
Does anyone have a suggestion for a low profile stereo mic, to use with the Vado 3rd Gen
Thank you.
Thank you.

This is happening to me too, I don't know if this is an Adobe Flash Player 11.5's bug or it's just my computer. All my browsers, chrome, IE9, Fox, doesn't even load anime videos. I tried reinstalling 11.5 many times, it have no effect but I use IE9 64-bit to run the videos that couldn't run. I waited 25 min for a JW player to load an episode of anime and I'm sick of it.

Similar Messages

Problems using iSight as a microphone

I am having problems using iSight as a microphone in applications such as Garage Band and Audiodia.
My iSight is connected correctly, the green light is on, the picture works if I look at it in iChat. I have used the Sound system control panel to set iSight as the input source. When I speak into the iSight the sound bars in the system control panel show that the iSight microphone is working.
When I use an application I ensure that other other applications are not running so that nobody else is using the iSight. Within the applications I also set iSight as the input source (Garage band doesn't give you the choice - I guess it refers to the system control panels).
Despite all of this, both Garage Band and Audiodia continue to take their input from the built in microphone of my Powerbook G4, instead of using the iSight.
Why is this? Any tips?
JAY.

Hi Jay,
Welcome to Apple Discussions.
iSight is designed to work with iChat AV. It is a GREAT mic for that use, and for use with Some Applications you can use with iSight.
I do not use GarageBand, but I have a chat friend who does. He tells me that iSight does not work successfully with GarageBand. I think I recall that iSight runs at 48Mhz, but GB expects a 44.1Mhz source that can match its Midi input.
Logitech USB Desktop Microphone works with GB, as will many others from many sources.
For more info, you will get better help with GarageBand than I can give at GarageBand Discussions. The GB users will be watching there.
<small>EZ Jim</small>

Wireless blue tooth capabilites with Vado HD (3rd generation)???

I have a wireless mini-printer with blue tooth capabilities/and wired. Will this work with printing out pictures on 3rd generation Vado?

Hi CheriMo,
Thanks for sharing this info. You don't have to be recording in order to lock the Vado HD 3rd gen?if you press the On/Off button while the unit is on, this will also activate the lock feature.
Press the button while the unit is on will activate the lock feature. To unlock, press the button again.
Press the button while the unit is on will activate the lock feature. To unlock, press the button again.

HT204387 I have an iPhone 3GS and I can't get it to pair with my iPad 3rd Gen neither will discover the other any suggestions

I have an iPhone 3GS and I can't get it to pair with my iPad 3rd Gen neither will discover the other any suggestions

An iPad and iPhone cannot connect via Bluetooth unless you are trying to use a Personal Hotspot feature on your iPhone or have one of the few third-party apps that allow limited file transfer or device-to-device gaming. Unless you're attempting one of these, then any previous "pairing" was probably illusory. If you are trying to use such a thing, tell us which one and someone may be able to provide suggestions.
Regards.

Sony pj650 says accessories not supported when trying to use Sony ecm-gz1m gun/zoom microphone.

The sony ecm-gz1m says it is compatible with cameras that have the multi interface shoe but when I plug it in it says accessories not supported.

Hi duszac,
Welcome to the Sony Community!
The ECM-GZ1M microphone is indeed compatible with the HDRPJ650V camera. But the Zoom mode is not going to work. Please detach the microphone from the camera, check the setting of your mic, and change it Gun mode before reattaching it again. We recommend attaching the accessories while the camera is turned off.
If my post answers your question,,please mark it as "Accept as Solution". Thanks_Mitch

Nvidia 295.40 Problems Using XBMC Assaultcube or anything with(SOLVED)

The title pretty much sums it up , Ever since I updated to 295.40 . The previous driver 295.33 was working fine . Problems Using XBMC , Wine , Assaultcube or anything with uses Open GL . The two machines that are affected have the same hardware ( Nvidia 6200 pci) . Let me know if any of you are having similar issues . I will continue to work on this for a couple of hours . Thanks .
Last edited by sliposk (2012-05-03 18:47:26)

Tried upgrading the nvidia package after upgrading linux to 3.3.2 but with no success, it still freezes…
Gusar wrote:As I wrote in the other thread, the main point of 295.40 is to fix security vulnerabilities. So if you want to use older versions, at least patch them: http://www.nvnews.net/vbulletin/showthread.php?t=178006
Tried to patch 295.33, successfully (making a 295.33-3 package to stay clean), but had the same failures and freezes. Looks like the problem we are experiencing is caused by the security fix…

Problem using webservice method consumer proxy with rawdata from abap

Hello Gurus,
I am struggling with an error using a proxy consumer service from ABAP. The proxy was generated using the WSDL from the web service provider. For a specific method we need to send a rawstring as seen bellow:
The file to be sent on this call is a ZIP file XAdES-BES signed and on BASE64. I’ve implemented the proper code to get the original file from local PC, and convert it to BASE64 before moving the content to the webservice structure and call the service proxy. At SOAMANAGER I also configured the webservice and the proper port with the WSDL:
The communication is working properly but my problem is with the binary content. When calling the webservice the response is that the structure of the file is wrong. I found it very strange since I used a tiny SOAPUI project with the same WSDL and it worked with no problem.
After debugging I could see that the content moved to the rawdata string before calling the proxy does not match the content that I can see from the call payload on web services util (srt_util)!
So the sample code for my method:
* get the file from the specified folder
call function 'GUI_UPLOAD'
exporting
filename                = ld_zipfilename
filetype                = 'BIN'
importing
filelength              = zip_size
tables
data_tab                = t_zip_data[]
exceptions
file_open_error         = 1
file_read_error         = 2
no_batch                = 3
gui_refuse_filetransfer = 4
invalid_type            = 5
no_authority            = 6
unknown_error           = 7
bad_data_format         = 8
header_not_allowed      = 9
separator_not_allowed   = 10
header_too_long         = 11
unknown_dp_error        = 12
access_denied           = 13
dp_out_of_memory        = 14
disk_full               = 15
dp_timeout              = 16
others                  = 17.
* convert to string
clear buffer_zip.
call function 'SCMS_BINARY_TO_STRING'
exporting
input_length = zip_size
importing
text_buffer = buffer_string
tables
binary_tab   = t_zip_data[]
exceptions
failed       = 1
others       = 2.
* encode base 64
perform encode_base64 using buffer_string
buffer_zip.
form encode_base64 using in_string type string
out_string type xstring.
data: l_sbuff     type string.
* convert the file to BASE64
call method cl_http_utility=>encode_base64
exporting
unencoded = in_string
receiving
encoded   = l_sbuff.
call function 'SCMS_STRING_TO_XSTRING'
exporting
text   = l_sbuff
importing
buffer = out_string
exceptions
failed = 1
others = 2.
endform.                    "encode_base64
calling the webservice:
l_input-xxxx-dokument = buffer_zip.
try.
call method l_proxy_test->webservice
exporting
input = l_input
importing
output = l_output.
catch cx_ai_soap_fault into lr_exc_soap_fault.
    endtry.
From my understanding rawstring should be the same as ABAP xstring. If I debug the program and check the content of the l_input-dokument before calling the proxy I get binary content: “Izw/eG1sIHZlcnNpb249IjEuMCIgZW5jb2Rpbmc9InV0Zi04Ij8…” that is in fact correct
If I check the payload after call I can see that the binary content sent on the XML is not the same, in fact it is totally different: ”SXp3L2VHMXNJSFpsY25OcGIyNDlJakV1TUNJZ1pXNWpiMlJw…” !!
I’ve tried a lot of different conversions, changed configuration on the communication, port, etc and nothing seems to work. I really can’t figure out why the binary content on the call is not the same as I move to the webservice structure.
If I use the project from SOAP UI and send the proper binary content, that is “Izw/eG1sIHZlcnNpb249IjEuMCIgZW5jb2Rpbmc9InV0Zi04Ij8…” it works perfectly and the response is successfully.
Anyone has a clue what could be causing this?
Appreciate any kind of input.
Regards,
João Silva Pinto.

Anyone? Any clue would be appreciated.

Problems using Acrobat Pro to scan with 10.5.2 and HP7280

Hello,
I'm hoping someone can help me. I'm trying to use Acrobat Pro to create PDF via scan. The scanner I have is an HP Photosmart C7280 all in one. When I try to use it, it starts up HP Scan Pro and gives option is scan to Acrobat. Unfortunately, when I ask it to do so, it crashes Acrobat.
Any ideas on what to do to make this work?
Thanks

BTW: whats with this ÎÎ¹ÎºÎµ stuff.
As for Adobe/HP.
They have had a long running feud of Sorts for years running.
there was a very long period that spanned several versions of Acrobat, and HP Print Driver Updates. where every time adobe issued an update for Acrobat. Hp had to turn around and issue an update to their print Drivers.
The controversy swilled around If a Pdf was printed through acrobat or Reader to an Hp Printer all you would se was a series of very fine line screwed sideways much like looking at a TV screen the Horizontal hold adjustment was out of whack.
I'm sure Aandi , and Mike as well as myself posting thousands of times over the years to use the work around of going to print menu advanced and choosing print as image. And if it cleared the problem, to get on the horn with HP and let them know their driver was broken.
HP would fix it it work for a month and Adobe would do another update, and the same thing would happen.
It would be like the joke about Peat and repeat sat on a fence. If Peat fell off who's left? Pete. Then you would say repeat. And the person telling everything would repeat until you caught on.
You would think that a Software That depending highly on how printers would print would actually have sample of printers from the printer vendors to test on.
I also find it strange you never hear of any other printers having as much problems with adobe products.

Using Labview speaker and microphone with multisim

I've just installed the student version of Circuit Design Suite
10.0. When I try to use the supplied Labview speaker and microphone all of
the controls are greyed out. I'm able to use the Labview signal analyzer
and the signal generator just fine.
I'm using Windows XP Pro and have a 2.4 GHz Pentium 4 processor with 1.5 GB
of RAM.
Is there something I can do to allow me to use the speaker and
microphone?
Rich Green

The speaker and microphone are not real-time components, you need to give it time to acquire the data, only when it finish the button will be active. For this feature to work, you need an actual microphone to be connected to your machine and if you talk into it, it will capture you voice and can send it out through your computer speaker.
Tien P.
National Instruments

Anyone having problems using non-apple mains charger with Classic?

I have 2g nano which works fine with my generic ipod charger. I'm about to upgrade to an 80gb Classic. Anyone have any problems using these?

xavierlopez wrote:
I found this "recipe" in a another forum and it worked!
a) Disconnect all your devices from icloud (ipod, iphone, mac, etc.)
b) Reset and CHANGE your Apple ID password
c) Reconnect all devices
and Voila!
Voila what?
Unless you put the new password in all devices they won't reconnect.

Problems using M Audio Fast Track with Garageband

According to the blurb, the M Audio Fast Track (USB) 'is class compliant in Mac OSX offering true plug-and-play operation. Just plug in, and you're ready to start recording'. This is why I bought it, but I am experiencing no end of problems actually getting it to register with Garageband '08.
The problems are (a) I cannot hear any sound coming 'through' the Fast Track and Garageband (b) I can hear the guitar if I plug the headphones into the Fast Track, but nothing is recorded in Garageband (c) my mic, which is plugged into the line socket intended for guitars because I don't have the larger connection, reports no sound at all.
Any ideas, or tips to how others have managed to set up this 'plug-and-play' device would be greatly welcomed.

Did you ever get this to work? I just today bought a Fast Track Pro. I have it hooked to my MBP via USB. I can see in control Panel two inputs:
M-Audio Fast Track Pro UDB: Line Input
M-Audio Fast Track Pro UDB: S/PDIF
Problem is, there is no sound registering on the Input Level on either choose.
I have the Power On and have tried both Input 1 & 2, bith in stereo and mono mode.
(Just to be clear, I connect the electric guitar directly to the Fast track pro, correct?)
I have read the owners manual but it is worthless. I thought this would be easy to set up.
Also note that GarageBand preferences the Audio Output and Input are selected to Fast Track Pro.
What am I doing wrong?

Have you been having problems with ipod nano 3rd gen?

Have you been having problems with your ipod nano 3rd gen? got a windows xp computer? is your pc not recognizing it? I think i may have the solution. After 2 2 hour calls to apple tech support they were stumped. we reset it again and again, reinstalled itunes again and again. and they had no solution for me. I went to my device managerand there was a device called (apple Ipod USB driver) with a yellow exclamation point. I tried updating driver but to no avail. I tried uninstalling and reinstalling and nothing. But then I had an epiphany. I went to the device manager right clicked the apple ipod usb device clicked properties then update driver. Hardware wizard went up and I chose not to install automatically. and i chose to install driver manually. and then I installed a generic usb mass storage driver in its place and presto!!! it worked! it was instantly recognized by itunes and it took me to the registration page. I did what the apple support team wasn't able to do for 4 hours. I wonder if they're accepting applications... Anyway i hope this helps anyone out there cause i know i went through a lot of stress.

the driver is just a regular usb mass storage driver. it's in your computer. it's just a matter of installing it manually where it saya to include the location of the driver click browse and choose c:\windows\system32

HOW I GOT MY IPOD TO WITH WITH ITUNES 7 (3RD GEN)

I had pretty much the exact same problems as alot of people on here. Let me recap:
1. Installed iTunes7
2. 3G 15Gig iPod is no longer recognized.
So this is what I did to solve this. I have a mac laptop and a PC desktop. My iPod syncs with the PC. This what I did:
3. Boot the Mac and open up activity monitor.
4. Plug in the iPod. iTunes will open and freeze.
5. Use Activity monitor to kill the itunes process.
6. Open up finder->applications->utilities->ipod updaters
7. Run the newest app to restore the ipod.
8. Eject the iPod from the mac and connect it to the PC.
9. My PC detected the iPod and told me it was corrupt.
10. Use the PC to restore the iPod via iTunes 7.
11. Reboot.
12. My iPod began to work at this point.
Took me a better part of the day, but my iPod seems to work without a problem at the moment. Again, its a 3rd Gen, 15 Gig unit. This fix should be applicable to all non-functioning units...
If you only have a mac, fixing the ipod will be easier. All you will have to do is perform steps 3 through 7 and it should work out.
Hope this helps!!
Andrew

Also, if your iPod does not display the do not disconnect icon on its screen, you will need to reboot to continue.
If the iPod does display the icon, but itunes doesnt recognize the unit, use Windows' "Safely Remove Hardware" application to disconnect it.
Hope this helps...

Itrip volume problem: volume reduces to zero when itrip attached to 3rd Gen

I've had a 3rd Gen ipod for some years and a (new style) itrip with silver selector button for about a year. Both have been working together fine until recently.
I'm based in the UK, went on a trip to the USofA recently and while there my itrip would not work. Every time i plugged it in the ipod volume would automatically reduce to zero. Thought this may be because i was using it in another country but the problem has persisted back in the UK.
Other online sources indicate it could be a problem with the itrips auto-adjustment of volume to reduce FM distortion but even with starting volume low (20% - 50%) the same reduction occurs.
Anyone else experienced this? ...any fix available?
thanks,
paul.
ipod 3rd Gen Windows XP itrip (with silver button and display)

Hah! I found the problem. It isn't with the Apple hardware or software. If I sync my iPod the problem goes away. If I restart it, the problem goes away. After talking with an Apple Expert I concluded that the problem must be with one of my third party apps and I determined to start checking them out to find the offender. Turns out a fun little game from the App Store called Parachute Panic is the culprit. It is repeatable that when I launch that app when music is playing the volume slider in the Music app goes bonkers. I'll report the bug at once.

Airplay not working with ipad3 but works with ipod touch 3rd gen works

Just recieved my apple tv 3rd gen (refirbushed) got it connected to my wifi and check out a few things and was working just fine. Then I tried to use the airplay function on my ipad 3 and it started to connect then the circle spins and error message appears. After which it messes up the wifi and nothing can connect to it, not ATV, not ipad, not touch, or other 2 laptops until it is reset. Did this a couple of times same result. Finally tried different tv farther away from router, same result. Lastly I tried touch, airplay worked with multiple apps. Retried the ipad, everything broke same as before. Please Help.
Last iOS on all.
D-Link DIR-635 - nWireless capable
MAC Address filtering on.
Home Sharing on.

Turn off the address filtering, and see what happens...
Using AirPlay
http://support.apple.com/kb/HT4437
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215

Problems using Sony ECM DS70P Microphone with Vado HD 3rd gen

Similar Messages

Maybe you are looking for