Problems using the correct APN when tethering
Hi,
I'm trying to connect back to my corporate network by using tethering from my iPhone 4 running iOS 4.3.3. To do this I've created a configuration profile and I've added the specific APN, usename and password which connects me to my work network. The iPhone connects ok and from the phone I can access network resources. The problem is that when I try to access anything from another device Mac or PC via tethering (I have tethering enabled and I've tried bluetooth, USB and WiFi), I can't access anything from within my corporate network. From doing more testing I have confirmed that the iPhone send all traffic from the external device out to the default APN and not the one I've configured in the configuration profile. I've tried this from another iPhone 3GS and I get the same problem. Can anyone please help on this?
If you tried with two different Sim card and still have the problem. I would advice you to simply reset the settings. That way you don't loose your medias.
a. connect your iPhone to iTunes.
b. Right click on it when it shows up on iTunes and choose back-up
c. Right click on it and make sure you transfered all purchase items
d. Take your iPhone, go on settings, general, reset all settings.
e. follow the directions
f. choose restore from back up when it ask you
g. connect to iTunes
h. right click on it and choose restore from backup.
i. choose the back-up you had done earlier
j. You should be good with your newly restored iPhone
But honestly... I really doubt that the problem is the phone. You should try with the sim card of another carrier.
Similar Messages
-
Help!!! - Problem using the app store when previously used by other person
I tried to give an iphone, previously used by someone else (call them person A) who upgraded to a 3G, to another person. Everything worked fine until they went to download some free software from the app store. After pressing install, the iphone asks for itunes userid and password. Unfortunately, person A's id is filled in and there is no way I can find of resetting it. I assume this has something to do with the itunes store. Help
need to eraze all settings on the iphone - pg 109
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
need to set up a new iTunes account and then synch erazxed phone to that account
http://www.apple.com/support/itunes/store/ -
HI ....I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet pen. used the power switch, when I tried to restart I got audible 'beeps' from it. I managed to restart it but kept getting a message come up on one ot the dual screens ' restart using the power swich to turn it off , then press it again to restart.'
This worked okay , but now it just keeps freezing whenever I start it up. I thought the issue could be my old Epson Expression 1680 scanner not being compatible , so I have unplugged it. I also had a look at the new memory I installed when I got it, but this seems not be the problem.
It is connected up to an Eizo Flexscan S2231W using a cable straight into the HDMI input , the other monitor is a small Acer using the VGA into Thunderbolt port.
When I turn the Eizo screen on first and then press the power button on the mac-mini, I hear the chime then the screen flahes the 'Digital no signal' message on and off for about 30 seconds , then the monitor comes on as normal. But it is still freezing up on me after using it for a while and I am having to use the power switch button to turn it off again.
Can anyone help please.I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen. -
i can't activate my iPad and I'm sure i am using the correct apple id and password but when i press net it says it cannot be used to unlock this
You can try to figure out which Apple ID/email address and/or password you used to activate it by going to http://iforgot.apple.com
If you can't, you'll need to contact Apple Account Security with your proof of purchase. -
I have a jetpack, and when I try to "connect" to my ipad or phone, it keeps telling me I am not using the correct password. I have tried everything. I even changed the password, nothing is working. Both are 4G, my ipad is an Air and my phone is a Iphone 5. I can get connected to other wifi on these features but not with my jetpack. Please help, I need to use this feature soon. Thank you so much
Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect. -
How do I get my ringtones back on my phone?
I lost my ringtones from my phone when I upgraded to iOS 6 on my iPhone 4. The ringtones are still on my computer and play in iTunes, but they won't re-transfer back to the phone. I'm using the correct iTunes account on both my computer and phone. In the iPhone view of iTunes on my computer, it shows that my phone recognizes that I had those ringtones, but there is an exclamation mark showing that my phone can't find the files. I can't delete these "placeholders" from my phone with the hopes of re-transfering the files back to the phone, either. I cannot just simply re-transfer the files from my computer back to the phone. It won't let me using the regular synch options and I can't find anything in the menus of iTunes to help me out either.
Any advice would be much appreciated.Ignore. I figured it out:)
-
Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated
I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0) -
I purchased a used computer and when I go to Itunes to buy music I am rejected. I am using the correct address and password
Error "The serial number is not valid for this product" | Creative Suite
-
I have just changed my iPad mini password a day ago, and when trying to access it today it worked fine until about 4:30 (GMT) when I could not access the device using the correct password. I am absoloutley 100% sure it's correct.Additional details:I was last using Kik messenger before it stopped working.I was sitting less than two foot away from the PS3 my brother was playing.I'm 14 but I'm not some spoilt kid who gets iPhones and iPads from his parents to mess around with, I have got important coursework and homeworks on there.Any help would be great Thanks.
Hello ConfusedLlama
If the password is not working to get into your iPad mini, you would need to follow the steps to restore it. If you have a back up through iCloud or through iTunes, you can restore from that back up and it would not bring back the passcode unless it is encrypted.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
-Norm G. -
I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please
iPhone 4, iOS 7.0.3There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
The new ibook app and ibook update is designed for iPhone 5 operating system. When my iPhone4 recently updated the ibook app, it created many problems using the ibook to download and read my books. Can I get the previous ibook app back on my phone.
Check your trash can on the desktop. The old version is automatically moved to the trashcan. You should be able to move it from the trashcan back to the Apps folder within the iTunes folder. The update that was pushed out was for iBooks to work with iOS 7 not iPhone 5. iOS 7 was released today.
-
'You Are Not Using The Correct Type of Phone Cord' Error
Having a issue with my fax on my HP Officejet Pro 8500 wireless. Tried to send a fax, it received a send error. I ran fax test and it came back with "You are not using the correct type of phone cord". Nothing has changed since I last fax'd but I check the lines and connection, everything appears ok. Phone jack is connected to 1-line and Officejet '2-ext' is connected to the phone. I use a dedicated phone # and the Officejet is set to auto answer. I can call out and receive calls on the phone connect to the Officejet. My assumption is that since I can use the phone without issue there is nothing wrong with the phone line. Any ideas?
This question was solved.
View Solution.I was having the same problem. I'm using a the 2 wire phone cord provided with the printer and still getting this error. Turns out that it related to have a phone extension plugged into the printer. If I unplug the telephone form the extension jack on the back of the printer, then the fax test passes. I was even using a 2 wire cord on the phone extension but it seems that simply having a telephone plugged into the extension jack will cause this error.
Run the test without a telephone plugged into the printer's extension jack and you should be fine.
Worked for me! -
How to determine the correct moment when Word has finished to write to a docx file
Hello,
we are currently passing a document to Microsoft Word for editing and want to take back the changed/saved document when editing is finished. But it seems we have issues to determine the correct moment when Word has for sure saved all changes and
it is save to take back the file.
To pass the document to Word we use ShellExecuteEx with the file name. Then we use the Running Objects Table and a File Moniker to wait for the file to be closed.
Sample code:
HRESULT hRes = S_OK;
CComPtr<IMoniker> spIMoniker;
CComPtr<IRunningObjectTable> pRT;
hRes = GetRunningObjectTable(0, &pRT);
if (FAILED(hRes))
TWTHROW1(TWERR_ANY_ERROR, hRes, _T("GetRunningObjectTable failed."));
hRes = ::CreateFileMoniker(m_strTempFilename.AllocSysString(), &spIMoniker);
if (FAILED(hRes))
TWTHROW1(TWERR_ANY_ERROR, hRes, _T("CreateFileMoniker failed."));
while (S_OK == pRT->IsRunning(spIMoniker) && !m_bShutdown)
Sleep(500);
continue;
So we wait for the file to be removed from the Running Objects Table and additionally wait until we can get exclusive access to the file before we take over the changed file. But still it seems to happen that we take the file too early. Hence it
seems the file is removed from the Running Objects Table by Microsoft Word before saving the file has completed.
Is this behaviour of Microsoft Word by design? What is the best practice to identify the moment in time when writing the file has completed. Some other applications like Winzip seem to do the same thing.
Thanks,
WolfgangHi WolfGang,
Thanks for posting in MSDN forum.
Based on the description, you are developing application with Windows API. I would like to move it to
General Windows Desktop Development Issues forum.
The reason why we recommend posting appropriately is you will get the mostqualified pool of respondents, and other partners who read the forums regularly can either share their knowledge
or learn from your interaction with us.
Thanks for your understanding.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Problem using the Write to SGL VI and Read from SGL VI
Hello Sir, I have a problem using the Write to SGL VI. When I am trying to write the captured data using DAQ board to a SGL file, I am unable to store the data as desired. There might be some problem with the VI which I am using to write the data to SGL file. I am not able to figure out the minor problem I am facing. I am attaching a zip file which contains five files.
1) Acquire_Current_Binary_Exp.vi -> This is the VI which I used to store my data using Write to SGL file.
2) Retrive_BINARY_Data.vi -> This is the VI which I used to Read from SGL file and plot it
3) Binary_Capture -> This is the captured data using (1) which can be plotted using (2) and what I observed is the plot is different and also the time scare is not as expected.
4) Unexpected_Graph.png is the unexpected graph when I am using Write to SGL and Read from SGL to store and retrieve the data.
5) Expected_Graph.png -> This is the expected data format I supposed to get. I have obtained this plot when I have used write to LVM and read from LVM file to store and retrieve the data.
I tried a lot modifying the sub VI’s but it doesn’t work for me. What I think is I am doing some mistake while I am writing the data to SGL and Reading the data from SGL. Also, I don’t know the reason why my graph is not like (5) rather I am getting something like its in (4). Its totally different. You can also observe the difference between the time scale of (4) and (5).
Have a Good Day
Regards,
Krishna
Attachments:
LABVIEW_Files.zip 552 KBAs already discussed a while ago, your binary data does not contain timing information. You need to tell it the scan rate so it can reconstruct the time axis correcty.
From the data, it seems the sample file was recorded at 0.5MHz. Take the inverse and set the time increment. Voila!
Your sample file is two column data with one colum all zero. You need to set the number of columns to two, to only get the good data in channel 1.
Your acquisition program contains unecessary FOR loops, you can remove the inner loops without change in result.
It makes no sense to convert to SGL if you initialize the shift registers with an empty DBL array. You need to initialize with an empty SGL array.
(The code could be simplified quite a bit more, but this should give you some directions).
The attached zip shows some ideas (LabVIEW 7.1).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
LabVIEW_FilesMOD.zip 195 KB -
How to pass in variables using the command line when starting ActionScript native app
How do I pass in variables or startup arguments using the command line when starting an ActionScript native app? For example, I have my app call MySweetWidget and it has been compiled with Adobe AIR captive runtime so now I have MySweetWidget.exe.
In the command line, I am calling MySweetWidget.exe and would like to pass in variables or properties to the application. I would assume that those variables are then read from the loaderInfo.parameters object.
Please let me know if the Adobe AIR runtime supports passing in parameters to the native runtime. If so, I would like help determining the correct format of how to pass in the variables. Then would you read those from the loaderinfo.parameters object?
Thanks,
JeffI found the answer to my own question:
Yes it is a supported feature. It is documented on the following page:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/desktop/NativeApp lication.html#event:invoke
When you subscribe to the invoke event of the NativeApplication it will subsequently dispatch the event and you read the e.arguments Array object to get the startup arguments passed into the native application.
Maybe you are looking for
-
Reversing a document posted to multiple vendors
Hello--I have a bit of a situation, and I was hoping someone could help. I have a payment that was posted incorrectly, and I need to reverse it. I tried using FBRA and reversing the clearning document, but I get the error message "Document 15xxxxxxxx
-
Time Machine says "The Backup Disk is Not Available"
Line 0: I have a 400 GB external Western Digital drive that I leave plugged into an Airport Extreme. Previously, this worked mostly without a problem. It took some massaging to get it to work at first (I had to create the backup with the drive dir
-
Blueberry iBook and Epson projector..
I know this is similar to another post but my iBook is older and the projector is different. The only cord I can find (my brother donated this computer to my classroom) is a short 6" clear cord with what looks like a yellow A/V type end (female) and
-
Hi guys... I need to create Pop up windows with a scroll like this sample web (click READ MORE): SAMPLE Anyone knows about a tutorial?? Thanks in advance
-
How do I go about moving forward on transactional licensing program?
Our higher ed department is interested in purchasing options for the transactional licensing program. The TLP info points to sales inquiry number who in turn pointed one of our techs back to the TLP website for information on purchasing. How do we ge