Problems using version set in Elements 9

Hi!
I have problems using the version set. When saving files in the Element 9 editor I can not mark the "version set" option, its not highlighted and not possible to mark or use. Is there a basic setting that I´m missing or??? I have the MAC version of Elements.
Also I have noticed that when I have edited a file in the Elements 9 editor and I come back to the Organizer the editor have changed the time of the photo? This means that its rather difficult to find the photo in the Organiser. It often change the time 1 or 2 hours.
As I cant use the version set I can not keep my tags on the edited pictures. Is there a setting for keeping the tags and catalogue belongings to a edited file?
As of today this software makes no sense to me and I can basically not keep working with it as it does not support basic functionality that I´m dependent on.
Best Re
A

I’m not seeing this in my own version sets in PSE9; when I expand the set every image has the same date and time under each thumbnail.
I’m wondering if you have used the “save for web” command at some point, which
wipes all EXIF metadata, including the date & time of the original - in order to optimize the image for display on the internet. So if you have imported such an image Elements has to make an estimate. Apart from this known scenario I can’t really explain what’s going on.

Similar Messages

Problem with version sets in Elements 12

I have just started using elelments 12. I have been having problems with inconsistency in forming version sets. Some sets forms as expected. However, quite often after editing, when returning to Organizer the edited picture is not in a version set with the original and in fact is not even visible. I can get to the edited version only through the "Open" tab in the Editor. I have check the appropriate "Save in version set" in the save menu. Suggestions?

Seems you have the same problem :
http://forums.adobe.com/thread/1309160?start=0&tstart=0
The source of the problem is not clearly found today. It seems that happens on previously converted catalogs.
A workaround seems to have been found : killing the autoanalyzer.exe process in the task manager.

Good Morning. I'm having a problem using both my Photoshop elements and premiere programs. I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in. I am able to open up the organizer without problems,

Good Morning. I'm having a problem using both my Photoshop elements and premiere programs. I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in. I am able to open up the organizer without problems, but when I try to open up the photo editor (either by trying to open up the program from the main menu, or right-clicking on a photo in the organizer to edit in elements), the program asks me to sign in to adobe (which I can do and it doesn't give an an "incorrect password" or log-in ID error) then accept the terms and conditions. When I click to accept the terms and conditions, nothing happens and the editor fails to open. Everytime I click on the program, I get this same "loop" of signing in and accepting T&C's, but the program fails to open. Any advice?

Premiere Elements 10 is now 64 bit, but not PSE10.
Take a look at your scratch disk set-up and if you have a spare volume, allocate that first before the C drive. Elements use scratch disks when it gets low on RAM.
Click image to enlarge
Turn off face recognition and the auto-analyzer to improve performance.
When editing photos or videos check the task manager to see what background processes may be running and end them temporarily if not needed.

Version sets in Elements 12

I have just upgraded from 8. I can load my Raw file ok (.NEF) into the raw converter and make adjustments as necessary. However, when I open the image and then save as, although the version sets option is ticked, it does not appear back in the organiser. The file is on the hard disk ok, but does not seem to be accessable from the orhganiser. I've seen some other people are having similar issues with version sets in elements 12 but I can't see what the soluton is.

Thanks for this advice. I killed ElementsAutoanalyzer.exe as described and this has partially solved the problem. Now when I open the image from the raw converter, and then immediately Save As, I get the options for save to organiser and include in version set ticked, the file is saved but doesn't appear in the organiser. If I then Save a second time (the option Save As is disabled), I get only the option to include it in the organiser (the include in version set option is disabled). This time, after checking ok to overwrite the existing file, it is included in the organiser next to the original file. Further editing of this file does save to a version set, so you end up with the original file and then a version set of all the edits. This is ok, although not ideal as it wastes space in the organiser.

Problems with version sets

I have PSE 6. When I open a JPG from the Organizer using Full Edit and then try to save, I do not get the option to save the image in a version set (even though I do have the Organizer option checked). However, I noticed that invoking Full Edit also prompts the Organizer to say there is a new file in the watched folders. This "new" file is the very same file in the very same location. If I accept to add the file to the Organizer I get two thumbnails in the Organizer, both pointing to the same file on disk. If I do this then the "Edit In Progress" banner appears on the "new" thumbnail and the editor does allow me to add the image to the version set. I am sure that I did not have to do this before, I would expect Full Edit to just open the image, mark it in the Organizer as being edited, not try to add it back to the catalog and allow me to save the edit in a version set. What might be causing this behaviour?
I also have similar and I think related problems with RAW images too, but I am hoping that resolving the above will resolve the RAW issue too.

I should have said that I did try that but it still prevented me from creating a new version in a version set when saving. It is as if the editor needs to start on a copy of the Organizer's entry to allow version sets, as if the original is somehow "locked". Could that be possible?

Linker problem using version 12.4 on Linux

I am trying to use Solaris Studio 12.4 on Linux ( OpenSuse 13.2 ). I have installed the compiler and set up the PATH to its bin directory. When I compile/link a program I am receiving:
"sun.link ../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem
"/opt/oracle/solarisstudio12.4/bin/CC" -g -m64 -KPIC -o "../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem" "../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o" -Bdynamic -lrt -Bstatic -Bdynamic
CC: Warning: failed to detect system linker version, falling back to custom linker usage"
and this is followed by:a series of errors involving standard streams, standard output, and the like:
"../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `__SLIP.INIT_A()':
/opt/oracle/solarisstudio12.4/lib/compilers/CC-gcc/include/c++/4.8.2/iostream:74: undefined reference to `std::ios_base::Init::Init()'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `__SLIP.FINAL__A':
test_after_array_elem.cpp:(.text+0x28f): undefined reference to `std::ios_base::Init::~Init()'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `boost::report_errors()':
/home/suseldiener/vcs/modular-boost/libs/vmd/test//../../../boost/core/lightweight_test.hpp:133: undefined reference to `std::cerr'
/home/suseldiener/vcs/modular-boost/libs/vmd/test//../../../boost/core/lightweight_test.hpp:139: undefined reference to `std::cerr'
/home/suseldiener/vcs/modular-boost/libs/vmd/test//../../../boost/core/lightweight_test.hpp:139: undefined reference to `std::ostream::operator<<(int)'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `boost::detail::error_impl(char const*, char const*, int, char const*)':
/home/suseldiener/vcs/modular-boost/libs/vmd/test//../../../boost/core/lightweight_test.hpp:75: undefined reference to `std::cerr'
/home/suseldiener/vcs/modular-boost/libs/vmd/test//../../../boost/core/lightweight_test.hpp:75: undefined reference to `std::ostream::operator<<(int)'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `std::ostream & std::endl<char, std::char_traits<char> >(std::ostream &)':
test_after_array_elem.cpp:(.text.std::ostream & std::endl<char, std::char_traits<char> >(std::ostream &)[std::ostream & std::endl<char, std::char_traits<char> >(std::ostream &)]+0x75): undefined reference to `std::ostream::put(char)'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `std::ostream & std::operator<<<std::char_traits<char> >(std::ostream &, char const*)':
/opt/oracle/solarisstudio12.4/lib/compilers/CC-gcc/include/c++/4.8.2/ostream:536: undefined reference to `std::ostream & std::__ostream_insert<char, std::char_traits<char> >(std::ostream &, char const*, long)'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `std::ios::setstate(std::_Ios_Iostate)':
test_after_array_elem.cpp:(.text.std::ios::setstate(std::_Ios_Iostate)[std::ios::setstate(std::_Ios_Iostate)]+0x7d): undefined reference to `std::ios::clear(std::_Ios_Iostate)'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `std::ostream & std::flush<char, std::char_traits<char> >(std::ostream &)':
test_after_array_elem.cpp:(.text.std::ostream & std::flush<char, std::char_traits<char> >(std::ostream &)[std::ostream & std::flush<char, std::char_traits<char> >(std::ostream &)]+0x37): undefined reference to `std::ostream::flush()'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `std::ctype<char> const& std::__check_facet<std::ctype<char> >(std::ctype<char> const*)':
/opt/oracle/solarisstudio12.4/lib/compilers/CC-gcc/include/c++/4.8.2/bits/basic_ios.h:49: undefined reference to `std::__throw_bad_cast()'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `std::ctype<char>::widen(char) const':
/opt/oracle/solarisstudio12.4/lib/compilers/CC-gcc/include/c++/4.8.2/bits/locale_facets.h:869: undefined reference to `std::ctype<char>::_M_widen_init() const'
...failed sun.link ../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem..."
This is all being done from Boost and Boost Build and the linker errors are occurring because of the run-time use of the lightweight_test component of Boost.
There is no problem using gcc directly compiling in 64-bit mode but Solaris Studio C++ 12.4 is failing.
Any ideas why it cannot find the system linker and use it, or why it is failing with the "custom linker", whatever that is, would be appreciated. If Boost Build needs some other compiler/linker option to work I can adjust that. Maybe I need to install some library for -std=c++11 mode or maybe -std=c++11 mode dopes has some sort of bug.

> undefined reference to `std::ios_base::Init::~Init()'
It looks like you link with different -library/-std set of options compared to those that you compiled with.
> CC -g -m64 -o test *.o -Bdynamic -lrt -Bstatic -Bdynamic
This link line uses default settings, which is -library=Cstd for Studio 12.4.
And since you use Boost most likely you compile with -library=stlport4 or with -std=c++03, which implies -library=stdcpp (gcc STL).
Otherwise you would most likely get compilation failures (since -library=Cstd is a rather outdated STL).
You should use pretty much the same set of options when you compile and when you link.
Verify your build configuration (CXXFLAGS/LDFLAGS whatever).
regards,
Fedor.

Problems accessing Version sets in Organiser

I have upgraded by download from PE10 to PE13. In the organiser my photos have a version set thumbnail in top right but no expand button or function via the edit menu which is greyed out. How do I get the version set to expand?

Hi,
You need to switch the grid view to the old classic style by using Ctrl (Cmd) + D or go to the View menu and check Details.
You should then see the version set open/close icons next to the thumbnail.
Brian

Version set problem

I have been using version seta for years,but now when I try to save an edited picture in a version set the organizer throws it away. Anybody else have this problem?

My catalog is roughly 12,000. The view I use shows the version set and the file information, i.e. Nef, Jpeg details.
Tim

Versions Set not saving in Organizer 9

Using Organizer and PSE 9 on a Mac, about 13,000 photos in single catalog.
Had been using Versions Sets with no problem, but now the edited image is not being added to the version set. It works okay if I do the edit in Organizer - the edited version saves in version set. But if I go out to PSE for edits and save edited version, a version set is not created. Using Save command in PSE and the "Save as Version Set with Original" box is checked. Have closed Organizer and reopened, also ran the repair catalog in Organizer, but no change.
Thanks,

Same issue here. Some files it works, some not. I cannot find any elements that would be causing this. I thought the file name could be too long, or contain special characters, but I have been able to make it work in some cases.
I'm not sure forums are monitored so I guess we're just out waiting for an update that would miraculously correct this...
In the mean time, when you do edit within an album, the edited files gets added to the catalog but not to the album, which is left with just the original. Very unuseful...
In the hope that someone will find a solution to this.

Version Sets - This must be super easy

I've been using PS Elements 5.0 for a while now but only the basics.
Recently I downloaded a trial version of DXO Optics Pro to optimize the quality of the photos (especially RAW files) from my DSLR.
I setup DXO as an alternate Editor program in PSE 5.0
When I edit the photo in DXO and leave DXO, close the external editor, then an enhanced copy of that image is saved in my catalog.
Here is the question, which I would have thought would have been obvious but I couldn't find or figure out the answer myself:
Is there a simple way to have that photo show up right beside the original in my PSE organizer? I was unable to tag the original file and the enhanced file to be in a version set. And, I have used version sets in the past but always with photos from the same date of import.
I haven't tried but I guess I could download some utility to modify the file date of the DXO enhanced image but that surely can't be the only way.
I simply want to keep the original but have the enhanced version displayed as the top photo in the version set.
While I'm asking, is there a better way to use the DXO plug-in? I tried the export function in PSE 5.0 but it got me confused and I ended up setting DXO as my secondary editor instead.
Thanks!

Tricia is correct. However, you may be asking another question, too. If you edit in photoshop, then your edited copies will appear in the organizer after you save them, either as a version set or not depending on what you check off on the window that appears as you save the edited picture. However, if you use another editor the edited copy you create will not automatically get into the organizer. Instead you need to save the edited copy, then go back to the organizer and import the picture into the organzier from your hard drive. To do so in organizer go to: file>get photos>from files and folder. (Photoshop Organizer obviously wants it to be easier to use photoshop for editing rather than some other software *grin*)

PSE 13 version set

I'm unable to view, manage or otherwise use version set options in PSE 13 (Windows 8.1) even though the set is created and the set exists and can be viewed in File Explorer.
It makes no difference if the set is created in the Organizer or manually saved as a copy in a version set in the Editor.
All version set menu options are greyed out.
I converted a catalog from PSE 10...repaired and optimized that...created a new catalog in PSE 13...no difference.
Any clues....?

View>Details and you should be able to work with version sets. The new adaptive grid view doesn't do versions.

PSE5 Not saving in version sets

How do I get edits to save in version sets with the original (RAW) file. I am using PSE5 on a Windows PC. This used to work fined but not since reinstallion. I have 800+ RAW files to work on and want to use version sets as I used to but whatever I do it doesn't seem to want to cooperate.
Can anyone help?

Do a file->catalog->Recover.
-Trish

Elements 11 problem with Saving to Version Set

I have upgraded toElements 11 but when i go to save a file to " save in version set with original" it will not let me, as the tick box is blanked out?

It maybe a question of permissions. Are you running from an administrators account or a user account? If the latter do you have full read/write permissions for the application? What operating system do you have ?
On Windows try making a direct shortcut for the Organizer and Editor. Make sure you have the correct file path as there is more than one exe file. You can then launch the programs directly from the desktop bypassing the welcome screen. This is generally better as the welcome screen leaves background processes running.
Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files (x86)\Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe"
Then click Next; then click Finish
Then make a direct shortcut for the Editor in a similar manner.
On Windows, Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files (x86)\Adobe\Photoshop Elements 11\PhotoshopElementsEditor.exe"
Then click Next; then click Finish
N.B. on 32 bit systems navigate to Program Files
Right click on each of the new desktop icons and launch by choosing “Run As Administrator”
Keep both applications running but try to edit and save a photo as before.

PS Elements Version Sets = Duplicate Images in Revel

I am using Elements 12 and Revel. I have a very large library with many version sets containing my master RAW file and an edited JPG copy. Prior to Revel acepting RAW files, I had no problem. Only my JPEGs were uploaded. Now however, I am seeing hundreds of duplicate photo images in my library, ie both the master RAW and my JPEG of the exact same image. While I love the fact that Revel can accept RAW images I am now frustrated over the fact that I have to scroll through so many duplicate images when viewing my photos on my iPad. Is there any way to hide images in Revel? Any suggestions as to how I can fix this (prevent Revel from uploading both the RAW and JPEG images in a version set) or having an option to hide either the RAW or JPEG image after Revel uploads them?
Mark

PS Elements creates and uploads the JPEG versions for RAW files. As a workaround for this problem, you can create an album under library in PS Elements and add all the RAW files to this album. This way all the JPEG versions of RAW files would be present in an album and this change would be propagated to iPad as well. So it would help in filtering out duplicate JPEG versions in your library.

Photoshop Elements 13 (Mac) Organizer - Can't save file with version sets.

I have spent many hours now trying to get Elements Organizer to save Version Sets when I've edited a photo. I've tried more or less every little thing you can find online without any luck. But just moments ago I found that if I move the file to my desktop everything works just fine. I then tried to edit files in a few other folders (also imported to my Organizer) and found that when ever the folder was named to something with a nordic letter in it (å, ä, ö) then I couldn't save my file with version sets (option greyed out) but if I moved that same file to another folder, well then everything worked as it's suposed to.
I'm using the trial version of PSE 13 for Mac (Yosemite) and the full version is ordered and on it's way. But if this problem can't be fixed, I need to return that order and buy some other photo editing program.
Can anyone help me with this problem? Is there perhaps a solution to this?
Please, any help is much appreciated!

I'm using the English version (as more or less always - Swedish is rarely an option). The thing is that I have never encountered this problem before in any other software I've been using, and certainly not in Aperture that I've been using up until now.
I name my photo folders with a date and a few words, for ex. "2014-12-31 New Years in Stockholm" (but I normally write in Swedish). I use this method so that my folder that contains the original photos will be easy to find in even without any other software than Finder (or Windows Explorer if I connect my external drive to a Windows machine). I could change the name of all of my folders, or at least all of the folders with a name containing one or more of the letters Å, Ä or Ö to "force" PSE to work as it should, but why? This really shouldn't be a problem.
I was hoping that their was a simple option or something like that that could fix this issue, but I guess not.
If this problem lies in the software itself I will have to return it and look elsewhere (but where? Lightroom is certainly not an option if Adobe can't handle "normal" letters and Aperture is discontinued in a few months).
Thank you for your reply!

Problems using version set in Elements 9

Similar Messages

Maybe you are looking for