Problems View language change

How do I change the language in Flex Builder 3 Problems View?
This is Czech. I don't understand Czech. I want English.
Can someone please help?

Hi,
The DG834G Netgear that I had would not work without the DOS being Off and the Pings being allowed.
Do you still have the Port Forwarding setting Enabled ?
I am curious about the VPN.
Some VPNs are set up with an Internet connection as part of the process.
It sounds like this one is not. iChat cannot resolve two connections to the Internet (Wifi and Ethernet at the same time for instance)
The No Data for 10 Secs message means you were connected (even if you did not see any Video or hear any Audio).
The message means that iChat did not end the chat and that an external event did, such as pulling an Ethernet cable, router failure, turning off the Mac's Airport card.
DOS work on a threshold basis and if it receives "Too much Data, Too Quickly" it cuts the port that this is happening on to "Protect" the whole connection.
This threshold cannot be changed and tends to be lower than iChat can Stream video over modern connection speeds.
I would try two things separately.
The SIP ALG is something I did not have on my Netgear.
iChat Uses SIP so I would try it with that ON.
Also try setting iChat menu > Preferences > Video Section > Bandwidth Limit to 500kbps
iChat 5 Can "See" your whole Internet Connection speed. (iChat 4 and Earlier was limited to a max of 1.5Mbps set in System Preferences > Quicktime > Streaming - a setting that does not exist in Snow Leopard)
It could be that the new router allows faster throughput and that you have moved to iChat 5 meaning you are bumping into the DOS threshold.
Of course the issue could be at the other end. The log is not that specific about which end "Cut" the connection.
7:34 PM Sunday; July 25, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Similar Messages

Why did my calendar view suddenly change? Using iOS 7.1 and I've been using this version for a few weeks with no problem with my calendar. Now the view has changed and I can't view a list mode without seeing the month too

Why did my calendar view suddenly change in iCal? I've been using ios7 fôr a few weeks now with no problems. Suddenly, without any updates or anything, the calendar view changed and I can no longer view it as a list without having the entire month seen as well.

Hey Gattypyle,
Thanks for the question. You simply need to go back to Day/Week view, then tap the list-view icon once more.
Calendar at a glance - iPhone
http://help.apple.com/iphone/7/#/iph3d110f84
View a list of events. In month view, tap to see a day’s events. In day view, Tap the to view a list of events.
Thanks,
Matt M.

Problems realted to changing the language for non-Unicode programs from one into anther.

Hi,
Hi everyone!
Product Name: HP Pavilion dv6-6093ex
Product Number : LM610EA#A2N.
My Windows 7(464Bit) Ultimate, and its base language, and display language is English.
The Languages(English, French and Arabic) built-in (came re-downloaded and re-installed by the person who made the Windows disc installation). Thus, while installing Windows 7, those three lanauge listed for me to choose one of them to be the base language
and display language, I have chosen 'English'. In the End of installation, there are three pre-packaged languages(English and French and Arabic) can be used as a display language.
I would like anyone kindly to confirm for me why I have been facing these problems when changing language for non-Unicode programs from English into Arabic.
First: After I have installed the AMD High-Definition Graphics Driver (sp55092) 8.882.2.3000 on my laptop. The contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic while language for non-Unicode programs
is Arabic, however, they are completely shown in English while language for non-Unicode programs is English.
A: I found that contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic (second screen shot below, however,
when click on any options, for example 'Graphics properties' shown in Arabic in, the second window is shown in English) while language for non-Unicode programs is
Arabic, and it doesn't matter what format or location is.
B- when I changed language for non-Unicode programs into
English.
I found that contents of the Intel Graphics and Media Control Panel are completely shown in English .
Second:
A- Only All Arabic contents will be displayed encryptely while language for non-Unicode programs is English
B- All the Arabic contents are displayed properly while language for non-Unicode programs is Arabic.
Third: an error extracting drivers and software downloaded from official HP website while language for non-Unicode programs is English.
A- I noticed an error extracting all kinds of comprised files(drivers and software) downloaded from HP website while language for non-Unicode programs is English and whatever location and format are:
B- However while language for non-Unicode programs is Arabic, there is no error extracting files.
In conclusion, Is it normal
for all of you the contents of the of Intel Graphics and Media Control Panel are partially shown in your native while language used
for non-Unicode programs is your native lanague, however, they are completely shown in English while language for non-Unicode programs is English?. IF so I would be saying that if I have wanted the contents of documents written in my language
Arabic to be shown properly, then then I
must let the language for non-Unicode programs be Arabic.
Is this happens with you as well?
Also, if I need extracting all kinds of comprised files(drivers and software) downloaded from HP website, then language for non-Unicode programs
must be in my Arabic lanague English and whatever location and format are.
Is this happened with you as well?
I would highly appreciate any clarification from you.
A man should convert his anger and sadness into strength to continue living in this life.

Hi,
I am confused about your issue.
when you changed language for non-Unicode programs into English, it show English.
while language for non-Unicode programs is Arabic, it show Arabic, If it's none-Unicode.
This is correct. Why you think it's an issue?
About your second scenario description, I was not clear what you said. Could you give us a explanation?
Note: System display language is not the un-Unicode program language.
You can just choose one language to display the system at same time.
This article might be helpful to you:
Install or change a display language
http://windows.microsoft.com/en-in/windows7/install-or-change-a-display-language
Change the system locale
http://windows.microsoft.com/en-in/windows/change-system-locale#1TC=windows-7
Karen Hu
TechNet Community Support

How can I restore the character viewer?* Changing options in Language/KeyboardPref does not help

How can I restore the character viewer?* Changing options in Language/Keyboard Pref does not help...

Tom may be refering to these..
/Users/YourUserName/Library/Preferences/ByHost/com.apple.HIToolbox.12digit Hex#.plist
/Users/YourUserName/Library/Preferences/com.apple.CharacterPaletteIM.plist
/Users/YourUserName/Library/Preferences/com.apple.CharacterPicker.plist

Information you exchange with this site cannot be viewed or changed by others, However there is a problem with the

Team,
Getting below X mark for couple of users when they are using outlook.
Information you exchange with this site cannot be viewed or changed by others, However there is a problem with the
site's security certificate
X- the security certificate was issued by a company you have not chosen to trust.
view the certificate to determine whether you want to trust the certificate authority.
we have 2 child domain namely us.com and emea.com.
us.com users are getting a certificate pop up on outlook , but the entry on the top is showing as server.emea.com which is not belongs to us.com
checked the certificates on us child domain cas/ht server and there are no SAN entry listed for emea.com, it was working earlier and started week back.
any help in this matter is appreciated.
regards
Srinivas
Srinivasa K

Hi,
According to your description, your Outlook clients on child domain us.com come across the security alert about one name of another child domain. If I misunderstand your meaning, please feel free to let me know.
If yes, I'd like to recommend you check if there is any URL which is set with the name. Additionally, please check if there is any expired certificate.
Thanks,
Angela Shi
TechNet Community Support

How to view the changes immediately after a jsp is modified?

          Hi All,
          How can I modify a JSP and view the changes immediately
          without packing a war and deploying again.
          The JSP may reference a tag library.
          And also, I don't want to register the compiled jsp class
          as servlet class in web.xml because there are hundreds of
          jsp files.
          Then, how can I do this to save the development time.
          Any suggestion is appreciated.
          Thanks!!!
          Kammau


Hi Kammau,
          the next thing you should do is:
          - create a standard EAR (jar, not "exploded"), with application.xml,
          manifest entries, etc.
          - try to deploy. If you can't deploy this way, you still have some
          problems which have nothing to do with the jsp-reload-thing. Solve them
          first. (You can ask us, of course)
          - if it works, try to deploy the EAR "exploded" with "exploded" WAR in it.
          - if that works, try the jsp-reload.
          Good luck,
          Philip
          Kammau wrote:
          > Hi All,
          > I try to deploy my jars (local ejbs) and my jsps separately.
          >
          > I have tried two ways, but all fail.
          > 1. I create a app directory under my server directory (same as DefaultWebApp),
          > and put all the jars and the war (exploded) under the directory. Then I add the
          > script in the config.xml likes:
          > <Application Deployed="true" Name="myApp" Path=".\config\mydomain\applications\myApp">
          > <EJBComponent Name="myJar1.jar" Targets="myserver" URI="myJar1.jar"/>
          > <EJBComponent Name="myJar1.jar" Targets="myserver" URI="myJar2.jar"/>
          > <WebAppComponent Name="war" Targets="myserver" URI="war"/>
          > </Application>
          >
          > //myJar1.jar and myJar2.jar are my jars and I put all jsps under the war directory.
          >
          > Unfortunately, it fails.
          > I found the weblogic tried to deploy the jars and war, but both of jars and war
          > can not be deployed.
          >
          > 2. I put the jars into a ear and I also create the
          > app directory under my server directory (same as DefaultWebApp), and put the
          > war (exploded) under the directory. Then I add the script in the config.xml likes:
          > <Application Deployed="true" Name="myApp" Path=".\config\mydomain\applications\myApp">
          > <WebAppComponent Name="war" Targets="myserver" URI="war"/>
          > </Application>
          >
          > Unfortunately, it fails.
          > In this case, I can deploy the jars, but when the weblogic tried to deploy the
          > wars, it can not find the jndi names of my jars.

Problem in language Translation

Hi Experts,
I am having problem in language translation of smart form.
I have include all text as text element and have done translation in SE63. But when I login in to translated language the output remains in English.
I have made the translation from English to Chinese in SE63.
Please suggest why the output does not come into translated language.

Hi ,
I have been working on translations for 8 months now. I think i can resolve your issue.
Remember one thing in mind when you do translations firstly when you go to se 63 and make some changes make sure that you have not opened the smartform in Change mode. If you do so then you will face this sort of probelm. As per your messages i think you have already checked the language in the form
If not make sure you do it. Now try again in SE63 make changes in what ever langauage you are doing and then "saveactive" .
One more final thing if anytext in smartform say &invoivce_no& is blank in smartform then it will not show up in se63 i think you know about this.

Problems with language while updating software

i have nokia 6630 device
first there was an arabic language on my phone
then after updating there was only english ,french and dutch
i want to have my language back
if any one knows how please send to me at
EDIT: Removed email addressMessage Edited by ajak on 24-Dec-2006
05:24 PM

I have a similar problem.
I bought my Nokia E50 with a OS including english, german, czech, slovak, polish and french, after an update via NSU there are only English, Indonesian, Pilipino and Malaysian... nothing else.
Is there any way, how to have the phone updated without such a stupid language change?

Federated Portal Language change not visible on remote role

Hi,
Remote role assigment is done on consumer portal. This remote portal role comes from a BI Producer portal.
This roles has worksets and iviews attached to it like km navigation iview etc.
User on consumer portal has options to change his language to french from default english.
Here the issue is, this language change does not reflect or apply to the remote role and its iviews or contents.(It continues to show in english) . But it works without problem o n local roles or ivews as expected.
Any idea on how this language change can be effected on the remote role and its contentc will be much appreciated.
Regards,
Ashok D

Hello Ashok,
You must remember that because this is RRA the content will actually run on the producer (unless this is an AI iView).
This means that the language will be determine according to the user's language defined on the producer itself, therefor you have to change the language of that specific user on the producer portal.
If this does not help it might be that the iView is forcing the language, then we'll have to try somehthing else.
Update me with the results of the first triage,
Also have a look at SAP Note # 1295703 under the Language category, it explains the algorithem of determining the language.
Best Regards,
Nadav.

Instalation Disc Missing, problem with language setup

Hello Microsoft
I have problem with installation of windows 7 home premium (x64). I got licence for polish edition of your OS. Now i was forced to reinstall this, but i lost my disc. I have found an english wersion of installation disc, so i thought hell yeah i will install
this and switch language later as many yours and external help sites says.
Well of course it can't be that easy, BECAUSE YOU HAVE BLOCKED LANGUAGE CHANGE in this particular OS.
So i would like to ask, can you provide a download link for polish installation disc for win home premium (x64)? (I have found lot of possible language versions but not polish)
By the way i have also tried to install language pack manually. What a suprise your clean fresh installed OS deletes any *.cab files, including the ones stored on external drives. I have my own *. cab packages with my personal files witch were also deleted
and if i had'nt made a backup - i would be seriously angry.
With regards

Sorry, but how about we stay aut of "Basic FAQ" answers?
1.) Windows upgrade anytime is no longer avaible for online purchase - this is my message when i run upgrade as 2nd link follows.
2.) I don't understand why im am suposed to buy and upgrade to ultimate wersion when USA/UK, spanisch, french, dutch!, danish!, italian, german or even czech can download an installation disc easly?
Even for other foreign customers you are providing the download disc link on this support site like for example:
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/where-can-i-download-windows-7-iso-i-have-a/7d964b05-2be9-4800-bc7f-3ca30356fc3d
http://social.technet.microsoft.com/Forums/windows/en-US/c0e78d7a-883d-4caa-a8c0-1e127a14612a/windows-7-home-premium-download
P.S I really tried to look for answers myself, but most of the links even on microsoft support in other topics are DEAD or redirected to windows 8 store.

Keyboard language changed only in Firefox not other programmes

I have Firefox in English but I use a Spanish keyboard, meaning some keys like question marks or quotation marks are in different places, there are accents, a key for ç, etc. It has always worked normally but today, while the keyboard is working correctly with all other programmes in Firefox it works as if the settings were changed to an English (I think) keyboard.
I don't have that problem with Chrome though, it's just Firefox. How is that possible (add question mark here, I can't guess what key I'im supposed to use for it).
I haven't changed anything in the settings, so the only possibility could be some kind of shortcut I've accidentally pressed, even though I don't know how that's even possible, as I assumed you can't have several keyboard language settings selected at the same time depending on the programme you're using.
I type in different languages so this is terribly annoying! Thanks for any help.

It is possible that you have switched the keyboard layout by accident by using the key sequence to rotate the layout.
* http://support.microsoft.com/kb/258824 - How to change your keyboard layout
Windows remembers the keyboard layout setting per application and you may have changed the keyboard layout by accident via a keyboard shortcut.
* http://support.microsoft.com/kb/306993 - HOW TO: Use the Language Bar in Windows XP
* http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)
Make sure that you have the Language bar visible on the Windows Taskbar
* You can do that via the right-click context menu of the Taskbar: Toolbars > Language Bar
* Check the keyboard language (keyboard layout) setting for the application that has focus via the icon on the Language bar
* You need to do that while Firefox has focus because Windows remembers the keyboard layout setting per application
* The default key combination to rotate the layout is the Ctrl+Shift or Alt+Shift combination that is used in Firefox for menu items, so it is quite possible to change the layout accidentally.
* To avoid an unintentional switch, assign a specific key sequence (Alt/Ctrl+Shift+number) to select keyboard layouts and remove the key combination to rotate layouts (Alt+Shift or Ctrl+Shift)
* Control Panel > Regional and Language Options > Keyboards and Languages > Change keyboards > Advanced key settings > Change key sequence

Language change makes me unable to log on my Macbook!

Hi guys,
So yesterday I changed my language from English to Vietnamese. My computer went on sleep. When I tried to log on, it didn't show up the dots(for the password field). I'm thinking the language change has messed up the keyboards! Could anyone tell me how to fix the problem? I really need to log on my computer as soon as possible. Thank you so much.
By the way, I changed the language to Vietnamese VNI.

Hopefully we can get Tom or others in here to help.
Does it boot into any of these modes?
Holding Option/alt key at bootup.
Holding SHIFT key at bootup.
Target mode...
http://support.apple.com/kb/HT1661
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
We might get clues with verbose mode...
http://support.apple.com/kb/HT1492
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Reset Password from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Reset Password.
Or do you have Firmware password protection in Mac OS X ...
http://support.apple.com/kb/HT1352
It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option, and Shift, as well as booting from anything but the Hard Drive.
Force Removing Password Protection
1) Add or remove DIMMs to change the total amount of RAM in the computer.
2) Then, the PRAM must be reset 3 times. (Command + Option + P + R).
http://www.securemac.com/openfirmwarepasswordprotection.php

Problem viewing photos in PE Organiser

Desperately need help with a problem viewing my pics in PE 9 Organiser. Many (most) of my photos will not display properly - instead, in their frames are yellow (?)'s in the upper left hand corner and blue (?)'s in the center. That is the situation whether I am in the "thumbnail" display or the "import batch" mode of "Display".
Strangely, I have used a number of these photos in an album recently and they displayed perfectly then.
Anyone have a clue???
Thanks tons.
Sam

Saurabhh:
It seems you are absolutely right on about the missing files. My only problem now is to figure how to restore about sixty
photos to the links -- maybe I should just delete the links?
I have another problem whch you may be able to help me with if you don't mind. I've discovered that my DVD Player only recognizes .jpg or .mpg format and my Photo Elements wants to create the slideshows in .wmv. Any suggestion sfor changing that.
Thanks

HELP! Problem viewing Youtube videos.

Hello,
I am having problems viewing Youtube videos. Everything was great until the other day. I have not changed anything on my computer to create this problem.
Diagnosis:
when viewing videos straight from youtube.com with Safari, it loads and starts to play the video & audio. after the first second the visual video disappears and the audio keeps playing. I can scroll throughout the video, but no picture.
I do not understand, I have updated everything and still same outcome. It was working the other day fine and then boom, no video. WHAT SHOULD I DO?
Thank you for you help,
B

Sounds like a problem with Flash. I'd recommend visiting Adobe's web site and updating to the most current version for OS X.
Roger

Language changed to Dutch and i can't get it bck t...

I changed my sim card on Nokia E52 and the languag changed automatically to dutch. and i can't return it back to english although i've chose english as my first language in settings.
Please help

''david.abel wrote:''
On the Firefox home page, the Arabic language has suddenly started to appear
Is the language for the menus and other user interface elements still English? If so,
# Click the ≡ Menu Button and choose Preferences.
# Click the Content icon.
# Below Languages, click the Choose button.
# Make sure a specific variant of English like ''en-us'' is at the top, followed by ''en''. Remove any unwanted languages as well.
[[Settings for fonts, languages, pop-ups, images and JavaScript|Settings for fonts, languages and pop-ups]]
''david.abel wrote:''
Also, my browser history has started to take up part of the screen.
I don't know what you mean by that. Please attach a screenshot.
* [[How do I create a screenshot of my problem?]]

Problems View language change

Similar Messages

Maybe you are looking for