Problems viewing .asp files

I can't view any of the video's linked from here:
http://www.honolulu.gov/cameras/
I'm using Quicktime v. 7.1.6 and Flip4Mac v. 2.1.0.33.
I also can't see them with Windows Media Player for Mac v. 9.0.0. Very Strange!
I've tried futzing with all the various settings ... but to no avail.
Can someone PLEASE help! By the way: the video's here are only representative. I've had problems at a variety of sites.
thanks in advance ...
iMac and MacBook Pro - both Intel   Mac OS X (10.4)  

Works here...try this.
Go to system preferences. Click on the Flip4Mac...Browser tab...unclick Launch Quicktime Player...close out and try again...
Even with a fast connection these streams to 10-15 to start.

Similar Messages

  • I am having problems viewing CR2 files

    Hi,
    I using windows xp service pack3. I used before about 2 years and I never had problems, but now when I uninstall adobe photoshop cs5  because I could not see CR2 files in adobe bridge I tried install again about 3 times and unsuccessful, could you help me please.
    Kind Regards
    Vygis
    Date: Tue, 12 Jun 2012 16:55:49 -0600
    From: [email protected]
    To: [email address removed by host]
    Subject: I am having problems viewing CR2 files Installing Adobe Photoshop cs5
    Re: Installing Adobe Photoshop cs5 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    Were you experiencing this message prior to removing Photoshop CS5 Extended?  If not what prompted you to reinstall?  Finally what version of Windows are you using?
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: Installing Adobe Photoshop cs5
    To unsubscribe from this thread, please visit the message page at Re: Installing Adobe Photoshop cs5. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

    Are you receiving an error when installing or are you unable to view your CR2 files once Photoshop is installed?

  • Acrobat X pro - Problem viewing PDF files in web browser

    I've recently upgraded to the latest Imac and have experianced one or two teething problems with software compatibility with OS X 10.7.1 Lion (most now resolved)
    My latest issue is viewing online PDF's which appear in my browser as just a blank black page. This happens in both Safari and Firefox (both latest versions)
    My question is: Does anyone have any ideas on how to solve this?

    I was able install and view the files in adobe reader 10.1.1 and in web browser window 7 64 bit machine.  But when I go to Edit-preferences-internet and  unchecking "display PDF in Browser" , I am not able to view the pdf files in ie 9 browser.  I have used this javscript to check for pdf version.
    Immediately after installing adobe--
    when I do adobe test in ie 9---https://courses.worldcampus.psu.edu/public/diagnostics/Acrobat.html--  launches a test pdf file--Acro_Test.pdf
    After unchecking-- it stays in the  https://courses.worldcampus.psu.edu/public/diagnostics/Acrobat.html instead of showing test pdf file--Acro_Test.pdf
    Tried to go back to "display PDF in Browser"--it is showing it is checked(eventhough I did not check it)
    and in ie
    it stays in the https://courses.worldcampus.psu.edu/public/diagnostics/Acrobat.html instead of showing test pdf file--Acro_Test.pdf

  • Problem viewing PDF File in JSP

    Hi,
    I have the file location of a PDF saved in the database.
    If I modify the PDF file on my directory and then try to view it in my browser, it still shows the old file .. (I do not modify the pdf file name)
    However, when I close my browser and reopen it, it shows up okay. this looks like a browser level problem but can someone give me an idea on how I can solve this problem within my JSP...
    Here is some code to view the file
    <a href="<%= response.encodeURL(fileLocation) %>"><%= binderName + ".pdf" %></a>
    Thanks,
    Yasir

    The problem you are having is a browser cache issue. If you open the same URL, the browser is trying to save you time by giving you what it got last time. The trick is to make the URL different each time it is opened. Just append a hash or some other unique code:
    Instead of:
    http://myserver/pdfMakerServlet/newpdf.pdf
    Use this:
    http://myserver/pdfMakerServlet/newpdf.pdf&012345
    If the URL is different each time, the browser will ask the server again for the file.
    Does this help?

  • Problem viewing xhml_usc file of UseCase diagram

    I am new to Jdeveloper. Currently working with Jdeveloper 11.1.1.6.0
    Cannot view the xhtml_usc files of items in the Use Case Diagram.
    I think there is a problem in interpreting the xml itself. Since in the source of the page, items r marked red and the xml tags r grey (cannot be interpreted). And in the html tab of the page, a blank page is displayed.
    Need help plz as we r investigating the new UML JDeveloper features here.

    It is typically a bad idea to have degenerate sample data as in this case where each element is 7. This does not easily allow to verify if the correct order and transposition is achieved. (Also, your second FOR loop is pure LabVIEW gibberish. )
    Try something as shows in the image.... (of course the diagram constants should be replaced my math based on the input array sizes).
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    ImageAverage.png ‏8 KB

  • Problems viewing PDF files following Acrobat Pro XI update to 11.0.10

    Following update to Acrobat Pro XI version 11.0.10, some of my PDF files give me the message "cannot find or create the font 'Times-Bold'. Some characters may not display or print correctly" when I try to open them. Associated with this is that the characters "fl" are missing, i.e. the word "fluid" in the files appears as "uid". For some other files, I do not get the message "Cannot find or create..." but "fl" is missing nevertheless. I had no problems prior to the 11.0.10 update. I have tried a repair installation to no avail. Any help would be greatly appreciated.

    Hey serafimk98854984 ,
    First thing first, Are you facing this issue with all pdf files or just one particular file? Because if you are facing this error with that particular pdf file then it might be because the fonts in the pdf file might have got corrupt.
    secondly i would like to know that which operating system are you using?
    Moreover, if you have acrobat installed on your system, then you might try the following procedures :
    1. Go to File-> save as other -> more options ->Post script ;
    Now open Adobe Distiller and convert Post script file into Pdf file.
    If the above procedure doesn't work then try the following :
    2. Tools - > Print Production -> Preflight -> PDF fixups -> 'Embed Fonts' and 'Embed Fonts (even if text is invisible)' -> Analyse and Fix
    Let me know if any of this works for you!!
    Regards,
    Rahul

  • Problem viewing pdf files when browsing

    Help!  Ever since downloading the lates Adobe and purchasing it, I can't view a pdf file at all from any site without first saving it somewhere.  If I just click on it, it won't open -- it makes me save it to a file first.  That never happened before.  After I download it and save it, then I can view it.  Is there a setting I need to change or something?  Thanks...

    Hi Randy,
    Try this:
    - Quit Safari completely (Safari menu > Quit)
    - Launch the Terminal application (Applications > Utilities > Terminal)
    - Enter the following command and then press return:
    defaults write com.apple.Safari WebKitOmitPDFSupport -bool NO
    - Close the Terminal window
    - Restart Safari
    - Try another PDF file and see if they now open in Safari.

  • Problems viewing Raw Files

    I have recently installed Photoshop CS4 on a new PC. When I open Bridge all Raw images are shown as icons and will not then open up in Photoshop (says there the wrong file type). When I try to install the latest version of Adobe Camera Raw and try to install it it says thet Bridge needs to be closed to continue installation but Bridge is allready closed. This has never been a problem on my old PC. Any help would be grateful.

    You mentioned that you downloaded the latest version of Camera Raw.
    Be aware that different versions of Camera Raw are specific to the version of Photoshop.
    I believe the most recent version of Camera Raw that will work with PS CS4 is ACR v. 5.7
    The later version like 6.5 will only work with PS CS5 or later.

  • Problem viewing pdf files

    When I click on a pdf file, it is black.

    i have these kind of problems too:
    it only appears in os x preview, safari, quicklook, and apps like papers, who uses the "os-x-pdf-engine". but these pdfs will only shown correct with the acrobat-reader. the problems are: complete black, complete empty, some objects are invisible, pictures are invertet, ect. a developer told me, that it is a bug in os-x...

  • Problem viewing .mid files in Score Editor

    Help please!
    Used Finale several years ago before I upgraded to OS 10 and Logic 7.2 Express. I recently opened one of my .mid files from Finale and it played back fine but when I tried to see the score in the Score Editor it was altered and only some of the notes were visible - even though they all played and were obviously "there" using other views such as Matrix or Event Editors!
    (The score in question still displays perfectly in Finale - the keyboard part in question has some large chord blocks that "build" but the build doesn't show in Score Editor - but the notes are "there and playing" - but it makes it hard to edit or follow in Score Editor.
    Before I go back into Finale for my notation/writing needs, I'd like to know if there is a way to bring these files into Logic "on all levels"- including the Score Editor - or is this a bug?
    Thanks in advance for the insight into the compatibilities or lack thereof between the two programs -

    There are many (read--jillions!) of options available within the score editor. When you open a score window on the midi sequence at hand first look at the inspector panel on the left side of the screen.
    The first be-triangled panel has a "syncopation" option. Toggle that and see what it does. Read the manual for how it decides what to do here. More importantly note your Quantize toggle there. This quantize is not for how the sequence sounds, but how it displays. Change it one of the more likely defaults 16,24 and you'll get one level of precision. Set it to 8,12 and you'll get another. Set it to 4 and you get nothing but quarter notes and half-notes.
    Read the manual for the myriad details, but hacking through the options may get you to what you intended.
    You should likely read up on "overlap" to see what kind of roadblocks it is or isn't providing.
    -- Gerry

  • Problem viewing AVI files with quicktime plugin

    I have quicktime 7.6 and perian installed
    When I try to stream an AVI file I can hear sound but no video is displayed
    If I download the file and I then play it with quicktime everything is fine
    If I remove perian then I will be able to stream from the website but of course unable to play MKV, Divx and Xvid files
    I have removed all obsolete codecs and I am running out of ideas on what is wrong with the system

    In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
    However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from
    http://www.divx.com/divx/mac/

  • Problem viewing Quicktime files after export

    So a few months ago, I finished a number of projects in Final Cut Express.  I exported them as self-contained .mov files and kept those files in their own folder.  Today, I try to open/play those Quicktime files, Quicktime opens and says "loading video", and only audio plays.  No video.  Weird.
    What I want to do is upload these videos to YouTube, so I opened MPEG Streamclip in an attempt to transfer these apparently corrupt files into a .mp4 format.  When I drag and drop the Quicktime files into MPEG Streamclip (the title of the first .mov file I tried is "1 Naitram On the Road to Syndicate"), I get this: "The movie file "1 Naitram On- FIN - 00000002 cannot be found.  Without this file, the movie cannot play properly".
    When I first exported these projects into .mov files a few months back, I was able to watch them in Quicktime.  Now, I cannot.  Why would this be?  Can a file just corrupt like that over time?  Are these files beyond saving?  Thanks..

    Thanks Al..
    The files originally used were imported from my Canon Vixia HF G10; I guess you would call them AVCHD files?  Anyways, when the files were imported, a scratch disc folder as well as a Render Files folder was created.  I arranged the imported clips in my sequence to make a two minute long videos, then exported as self-contained movie files.  Would having tampered with or deleted these Render Files even AFTER exporting have corrupted the QuickTime file?  ....because I may have done that..

  • Please I am having problem viewing attached files onto emails on my iPad 1, can anyone help?

    PLease I need help. I have had my iPad 1 3G wifi for about a year now, but after updating the software to 5.0.1 I have been unable to view e-mail attachment except for PDF documents. Can anyone help? Thank

    HI Diavonex, I have tried to reset several times without any luck
    THanks anyway

  • Problems viewing the files and images on a memory ...

    I have a series of folders and images in a memory card that I used to use with my 6300. However, since moving to the 5800, I can't see the folders or images that I stored on the card and my 5800 also mis reports the memory status!? Can anybody help??
    Do I need to download the images and reformat the memory card due to an incompatibility issue? But surely the 5800 is compatible with the 6300!?? 

    The 5800 and 6300 use totally different operating systems so there's no reason why the data layout and directory structure used by one should also be used by the other.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Viewing .wmv files

    This may be an old quesiton, but, I have problems viewing .wmv files online and when friends send .wmv files? I don't understand why? My computer is brand new this past Christmas.... When I select the file to be viewed an error message pops up with the Blue Q on the left side and it reads...."Error opening movie", then it says.... "The movie could not be opened".

    Have you installed the Flip4Mac plugin for Quicktime yet?

Maybe you are looking for