Problems viewing FLASH items

When I go to a lot of websites. A flash item will appear
normally and as soon as I start scrolling it will disappear and all
I'm left with as a white box. Is this my Flash player that is
acting up?

Try a test account where? I'm confused.
Okay, Under the Blue Apple menu > System Preferences > Accounts->
Log in Options:
Click Add [+] and type the user's name call it TEST in all fields for ease
long name short name pswrd, hint, you may later remove the account with the [-]
I have more, start with this it will let us know if the issue is within your username accountt or system wide.
Please let us know, what you find.
Thanks for the reply back.
Eme
Check these settings below:
In Safari prefs. "Appearance tab:" " Display images when web page loads" is selected.
In System preferences->Quicktime preferences:
• Browser tab-> Play movies automatically is checked ?
• Streaming tab-> check that your streaming Speed is set correctly i.e 1Mbps cable or 56 modem....etc... set it for your internet connection.
•Advanced tab Transport Setup: Automatic vs Custom
✓Enable Flash [ actually this made no difference in mine]
you could try it... no difference set it back as was.
• Advanced tab->check which are checked in MIME settings, [ so to compare I will write out all my setting and post them, since mine works; ]
edited by: Eme~x3

Similar Messages

Problem Viewing Flash Exposure Data in Bridge

Hi Folks
When I view flash exposure data on my camera it will show me the flash compensation value I have set eg -0.7 or +2. When I download the images and view the metadata in Adobe Bridge (from CS3) I appear to lose this information. It will tell me that the flash fired or nor, but that is about it!
Is there anything I am missing here, or is it just a limitation of Adobe Bridge.
Any information would be gratefully received.
Regards

I have been looking for the same information in CS5. Although I can't find it displayed anywhere in the Camera Data you can find it if you really need to.
Choose File Info from the File menu and then go to the Raw Data tab. Use the search function to look for "FlashCompensation". I found it there for my Canon G11.
Painful but works if you really need it too.

Problem Viewing Flash Movies in Windows 8.1 Internet Explorer 11

I am running a fully patched/updated copy of Windows 8.1 and Internet Explorer version 11 (on the desktop)
If I try and run the test movie at
http://helpx.adobe.com/flash-player/kb/flash-player-issues-windows-8html I get the following message:
Either Flash Player is disabled or ActiveX Filter is ON.
Please follow trouble shooting steps to play Flash content.
I have checked and double-checked that...
Flash Player is enabled
ActiveX Filtering is turned off
Internet Explorer is running the latest version of Flash Player
The only way I can get this to run at all is to enable'Compatibility Mode' for the web site. Is it the case that Compatibility Mode has to be enabled to view any web site containing Flash content?
Any information would be much appreciated.

Hi,
Do you mean the issue is only occurred on the website you provided? How about other websites?
I can run the test movie with no issue in my test machine, I suspect this issue is caused by browser incompatibility.
As I know, if the issue is caused by a compatibility problem between Internet Explorer and the site you're on. The issue can be fixed by adding the site to your Compatibility View list.
I also would like to suggest you reset Internet Explorer Settings for a test. Also make sure you're not using InPrivate Browsing.
Hope it helps.
Regards,
Kelvin Xu
TechNet Community Support

Problem Viewing Flash Object in IE

I have been managing my wife's website. She had someone design it, then the guy stopped responding, so I took over. Im somewhat of a beginner, so I cant figure this one out, and have looked online for resolutions. There are two pages on her site that have flash objects. When you go to either page in IE, you get an error : Content on this page requires a newer version of Adobe Flash Player. It then gives you a link to update, which lets you update, but then doesnt resolve the problem. Like I said, someone else did the basic design, so im not sure where they went wrong.
The two pages are:
http://www.karabakerphotography.com/index.html
and
http://www.karabakerphotography.com/gallery.html
The pages work fine in Firefox and Safari. So its only IE that doesnt work. I know differet browsers can use different versions of Flash. I have been using Dreamweaver CS4.
I have not spoken with anyone who can view it using IE. Everyone that uses IE has mentioned the problem to me.
Any help would be greatly appreciated. If you need any further info from me, just let me know.

Do the flash communicate with files which is outside of the sitedomain?

Problems Viewing Flash in Safari

I posted this over three days ago, got 49 views, and exactly zero replies!
So I am reposting in high hopes that someone can suggest something, anything that I can try.
Thanks for viewing anyway...
+I am trying to troubleshoot for my sister who has an iMac G4 800mhz; 768mb RAM; 64mb VRAM; running 10.4.10+
+Quicktime trailers play fine for her in Safari, (or on her desktop), but with Flash content, like at Youtube, or Comedy Central, the video playback stutters badly. I define stutter, as unwatchable jumpy video, and audio that plays back better than the video, but also drops out occasionally.+
+I've upgraded her to the the latest version of Flash, and that did nothing. I also downloaded Firefox, just to check another browser, and Flash content stutters there to.+
+My next idea, as a test, was to download a flash file to her desktop, and see if it stutters there without using Safari, and it's flash plugin, as the player.+
+So I downloaded a flash file from youtube, (by doubleclicking it in the activity window, which automatically downloads a file called, "get video," with no file extension, and a generic icon.)+
+I then added a .flv on the end of the file name, and the icon turned into a flash icon.+
+Now, I want to note, on my computers, when I add a .flv on the end of the name of one of these files I've downloaded from Youtube, when I highlight it in a finder window under column view, I see a preview of the movie, which I can play there. I can also ctrl click, and choose, open with other, (because flash player will not open an flv file), and choose Quicktime as the app, it opens and plays.+
+On her computer, when I highlight the same file in column view in her finder window, there is no preview visible, just a large flash icon, and the file will not open with her Quicktime app either.+
+Now, I could care less whether she can play the darn things on her desktop, though I am perplexed that I cannot. (I was just troubleshooting.) Btw, we are both using the same versions of OSX 10.4.10; Safari 2.0.4; Quicktime 7.2; and Flashplayer 9.0+
+All I want is for her to be able to play Flash content on Safari without the stutter.+
+Any suggestions?+

The most important thing: don't upgrade your OS or browser now.
Next, all we need to know is the speed of her internet connection, the amount of space left on her hard drive, the number of cute little widgets she has on her machine, and how long & often 10.4 has been used. These I explain below (except the internet speed, which just requires a larger buffer).
First, however, try adjusting the Power Management from 'Better Energy Savings' to 'Better Performance'. Flash runs fine on an iBook G3 whose disk is virtually filled (for momentary storage) connected to a 100 Mbps DSL, so something big (but likely easily fixed) is wrong.
On the G3 machine, Flash cinema (as opposed to cartoons, in SWF files) will stutter hopelessly if the Energy Setting is 'Better Energy Setting' and run adequately if set for 'Better Performance'. This is when viewing previews with Safari 2 of NetFlix movies.
If you Ctrl-Click the screen, a little menu offers 'Settings'. Clicking the folder, I choose only 100 Mb of cache. You can offer Flash as much as it wants.
The real problem, I'm guessing, is that MacOSX 10.4 is not paging (as it should), but swapping in desperation. This OS uses demand paging: the real memory is pretty much filled with processes (programs in memory) you either need or want to run, and the OS starts exchanging those pages (4096 bytes?) from the hard disk needed to run what is now scheduled, replacing part of the memory of a process not currently needed to run. This is fast, and the processors have hardware designed to page.
Problems arise when (1) you have many little widgets active (for, though they don't run, they take up real memory and can significantly reduce your 768 MB of RAM; and (2) your processor is stressed. This you can check by running 'Activity Monitor'. When real memory is mostly filled most of the time, when your hard disk's freespace is fragmented so the pages must be stretched out all over your disk; or the number of processes become too great: your computer swaps to speed the computer.
Swapping moves essentially the entire process to your hard disk, so whole processes are stored in real memory. These can be large. If you need just several large ones, they must play musical chairs: some pause when swapped to the hard disk, and others run fast. Power Management needed to cool the G4 is sophisticated, and takes memory. Safari 2 takes great memory. If fact, Safari 2 and a few widget will fill about 512 MB of RAM chips.
Now, if your swapping several processes that the scheduler things are really, really needed to keep your computer running, Flash Player will be swapped out, empying its cache. When it comes back, moments later, you have lost that period of time and it stutters.
I should start 'Activity Monitor' running, see what resources you are short on, then 'turn off' the Power Management processes and see if things improve. If you are not short of any resources, I should suspect your freespace is fragmented. This is not reported by any utility I'm aware of, but it will cause your Mac to ultimately swap rather than page.
This is because 10.4 had its file system 'augmented': every 20 MB or less in size is written defragmented. This is done by searching out the free space and diminishing it. This was (in my opinion) a good idea only if people now & then defragment their disks with a file-by-file backup & restore, or a disk defragmenter. Otherwise, your computer will eventually stop paging & start swapping, with a great change to your 'user experience', and you won't know why.
I should guess that this iMac G4 has run 10.4 quite a while without either. Is this true? Version 10.4 was installed on this iBook G3 when it first came out, and months ago I received the message: 'Not enough free space for 5 MB swapfile', when the OS reported 7 GB free on the hard disk!
Write back.
Best of luck,
Bruce

Problems viewing Flash Player content in browsers (as consumer)

Win XP Pro version 5.1.2600 Service Pack 3 Build 2600
IE 8.0.6001.18702
Firefox 3.6.27
I have insured I have the most current Flash Player installed. I even uninstalled and reinstalled it. I have confirmed my internet security is not blocking the content.
I'm writing as a viewer / consumer on web pages (mostly shopping sites). I do design web sites, but do not know Flash Player. On sites that have Flash Player content I can no longer see the images. When I right click on the image area, the Adobe Flash Player menu pops up, so that's how I figured out it was Flash Player. The happens in both IE and Firefox. I have not tried Chrome - would have to install that.
The "one moment please" message displays and then overlaid is "please try again later, our apologies." Examples of this are on jcp.com and bradfordexchange.com on individual product pages. Following are two links to individual product pages:
http://www.bradfordexchange.com/products/113801001_.html?cm_ven=FB-BEX&cm_cat=GDaughtEnvel ope-F55_113801001&cm_pla=GranddaughterLocket_Img-full1&cm_ite=F55_KW-None_1Step-N_Broad
http://www.jcpenney.com/jcp/X6.aspx?GrpTyp=PRD&ItemID=1769ead&DeptID=71371&CatID=71774&SO= 0&Ne=5+1028+1021+1031+1545&NOffset=2&N=4294953199&Nao=0&PSO=0&bcCat=3&cmAMS_T=XGN3&cmAMS_C =MERCHA&cmAMS_Z=XGN3TOPOFRESULTS&CmCatId=71371|71774
I don't know what else to try to fix this problem...it's very frustrating because I'm trying to shop on these sites.

Yes, it says it is enabled:
Name:
Shockwave Flash Object
Publisher:
Adobe Systems Incorporated
Type:
ActiveX Control
Version:
10.1.82.76
File date:
Date last accessed:
Today, March 08, 2012, 20 minutes ago
Class ID:
{D27CDB6E-AE6D-11CF-96B8-444553540000}
Use count:
24711
Block count:
0
File:
Flash11e.ocx
Folder:
C:\WINDOWS\system32\Macromed\Flash

Problem viewing flash videos full screen

When I go into full screen mode, the video freezes but the audio continues. The only way to fix this is to view it in "normal" mode and to refresh the page. When I right click on the video to access the settings in order to disable the acceleration, "settings" is not clickable. Help??
Win7 64 bit
FF 3.6.15
Adobe Flash 10.2.152.32

You can try to disable the hardware acceleration in the Flash Player.
See [[Cannot view full screen Flash videos]]
* http://www.youtube.com/swf_test.html (right-click the player: Settings)
Flash "Display settings" window:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

Problem viewing flash in Safari. (used to work fine?)

Hi, I use Safari for most browsing, and it has been fine until the last few weeks, Now I cannot see the flash content on any site. I get a Quicktime Q with a ?mark in it. I cannot right click to get the Flash menu either.
When I test the same sites in Firefox they work fine.
I have updated my Flash from the adobe site and this has not worked either.
My recent downloads are to to with SWF file reader and a few for Rapidweaver.
Safari Version 2.0.4 (419.3). With all the latest updates installed.
Thought about deleting Safari and re-installing it with a new download. But I would rather find out what the real problem is, rather than this last resort option.
Thanks
Powerbook G4 Mac OS X (10.4.9)

QuickTime System Preferences/Advanced tab
Open MIME Settings
Under Miscellaneous remove the check mark for Flash Media
Quit and relaunch Safari and try the Flash Site again.

Problems viewing Flash??

Im a web developer, and I developed this site www.actionfx.net/freeman
The problem:
The doctor I built the site for has an Airbook. It took him 45 seconds to donwload the web site. With my cheapo gateway laptop next to his, it took me 7 seconds to download the site. The entire site is about 2 Megs. The site preloads about 300KB when you first access it.
Anyone else having this issue?

Try a test account where? I'm confused.
Okay, Under the Blue Apple menu > System Preferences > Accounts->
Log in Options:
Click Add [+] and type the user's name call it TEST in all fields for ease
long name short name pswrd, hint, you may later remove the account with the [-]
I have more, start with this it will let us know if the issue is within your username accountt or system wide.
Please let us know, what you find.
Thanks for the reply back.
Eme
Check these settings below:
In Safari prefs. "Appearance tab:" " Display images when web page loads" is selected.
In System preferences->Quicktime preferences:
• Browser tab-> Play movies automatically is checked ?
• Streaming tab-> check that your streaming Speed is set correctly i.e 1Mbps cable or 56 modem....etc... set it for your internet connection.
•Advanced tab Transport Setup: Automatic vs Custom
✓Enable Flash [ actually this made no difference in mine]
you could try it... no difference set it back as was.
• Advanced tab->check which are checked in MIME settings, [ so to compare I will write out all my setting and post them, since mine works; ]
edited by: Eme~x3

Problem viewing flash video on Firefox

just came across a very odd problem happening with Firefox only.
The video loads first time and plays, however if you click the next time it comes up saying cannot access/access denied, couldn't replicate in any other browser.
Basically it works fine first time after clearing the cache in FF.
it's odd, would need a resolution immediately.
- you should get a video link on the home itself.
*in case u cannot access it please try out in sometime since we update it sometime.
Please HELP!

What exactly means "will not allow"?

Viewing Flash movies w/ v.9 player crashes

Has anyone had any problem viewing flash movies on a Mac with
the newest v.9 player? All our Mac's with the v.9 flash player take
an extra 11-12 seconds to show up and have a tendency to crash our
browsers. But viewing the exact same movie on the exact same
computer with the v.8 player they work just fine. I've tried it on
all our Mac's running different OS... both Power PC and Intell...
different browsers and I am getting the same result. Flash 9 takes
longer to load in and crashes the browser but 8 works just fine.
However on a PC it works just fine with the v.9 player. I use
Influxis and talked to them today...they can't seem to figure it
out and are having their mac guy look into it for me. Thought I'd
see if anyone else has had this problem. On a side note I like to
listen to BBC Radio 1 and that site crashes on me all the time. But
never happened before I installed the v.9 player. Did a little
digging and found other people having the same problem. They say it
has something to do with the banner ad's/video's being export to
Flash 9.
If anyone has any ideas...please help me out. Below are a
couple of links. The second one is a test Influxis set up as a test
while I was on the phone with them. It uses a simple NetConnection
with no player component. Both work great on all out Mac's with the
v.8 player but not with the v.9.
http://www.nxtwo.com/ravenswork/misery.html
http://influxis.com/btest/keithweb/JoshNelson/simpleViewer.html

Here's an experiment I want you to try.
Go to: [User]/Library/Application Support/Firefox/Profiles (hold the "Option" key when clicking "Go" from the Finder menu to access your [User] Library)
Copy the "default" profile folder from there to ANYWHERE other than the Firefox folder (a Flash Drive preferably, so you can remove it)
Trash the "default" profile folder and empty the trash.
Relaunch Firefox.
Go to YouTube and play ANY video there.
If prompted to install Flash Player again do so.
Let us know if that changes anything.

Problems viewing videos and trailers after the lastest Flash Player update

I have Windows 7 - 64 bit, I use Firefox 11 (latest version) and Chrome (latest version); however, since I have installed the latest Flash Player update, I cannot view any trailers or some videos. Youtube works fine, but other sites dont (I just get a green screen). Please can someone assist me? I have tried the "Help" section for Flash Player and it hasn't been too helpful.
Thanks in advance!
Ok, I found the problem, my hardware acceleration was set to enabled, once I disabled it, I had no problems viewing any of my sights that used Flash.
Message was edited by: BanzaiOrion

You might want to update your driver, particularly if you have an NVidia GPU. Here's a post where we describe this process and ask for additional details so we can resolve this for others.
Video investigation with Flash Player 11.2.202.228

Dreamweaver CS3 Image Viewer Flash Element

Here at Cleveland State University, I offer basic training
classes for most Adobe products. We are in the middle of a complete
overhaul of the
http://www.csuohio.edu space. Our
goal to is to create an attractive, website with a consistent look
and feel that makes it easier for our faculty and staff to update
on a more frequent basis. In doing so, we have created a series of
pages that can be easily edited in Dreamweaver CS3. One item we
would like to fully support is the DW CS3 Image Viewer - Flash
Element. However, we have hit a small layout snag.
On the main pages of most college and departmental sites, a
specific space with a finite size is set on a web page for the
image viewer. A site editor then creates images in Photoshop that
are that exact size. The image viewer element is configured to be
that exact size as well. Furthermore, the picture "frame", title,
caption and controls are hidden in the Flesh Element panel.
However, when the page is previewed either in Dreamweaver or in a
browser, the images have been shrunk. There is always a border,
whether it is white or some other color. I assume the color is the
stage color of the Flash .swf file. This causes a misalignment of
the images and the other text.
Another issue is the links that automatically created. Some
of our editors have asked me why, even though they specifically
leave the imageLinks area blank, links seem to be created pointing
to the Adobe.com website.
My questions: is there no way to force the Flash element to
respect the size of the pictures so that no border is showing? Is
there no way to leave the Im
I've done a search on the Adobe.com support site and on the
web and noted that several people have posted questions concerning
this. Unfortunately, no one seems to know what to do about it.
I can send links if you would like to see an example. I'd
greatly appreciate any help you can give me.

>I sent a message directly to Murray - one of the Adobe
techs that has been
>on
> the forum several times.
I'm just a user, like you. And I'd rather you not send things
directly to
me unless I request you to do this. If you have a problem
that cannot be
solved here, then your next option would be to contact Adobe
Tech Support
directly. I'm not very familiar with the Flash side of DW, so
I cannot be
of much help in this regard.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"pixelfixer" <[email protected]> wrote in
message
news:g0i4ih$r8t$[email protected]..
>I sent a message directly to Murray - one of the Adobe
techs that has been
>on
> the forum several times. I'm hoping he has a solution. I
can't believe
> Adobe
> hasn't fixed this one yet. It's been out there for a
long time it
> appears.
> Allwebco has an image viewer as well that I'm working
with and having
> similar
> results. So, I don't know what to think at this time.
I'm going to try
> to
> work with their tech support today.
>
> Steve
>
>

Recently having a problem viewing youtube clips embedded on to ppt

As a lecturer, I often insert youtube clips onto my ppt. Until about a month ago, I never had problems viewing the embedded youtube clips on my powerpoint files. Now, after having succesfully embedded the video clips, I keep getting this message as shown in the screen shot below. I have installed the newest version of flash player numerous times (my OS is Window Vista and the Flash Player version I have is 11.7.700.169, AND I mostly use Firefox but have the same problem on IE), turned off and back on several times, and uninstalled and reinstalled the Flasy Player many times, but nothing would work. I have tried embedding other youtube images as well as tried doing the same thing on other computers and I run into the same problem. I KNOW how to embed youtube videos into ppt files as I had done it a lot of times with no problem. I don't assume I am the only one experiencing this problem. Please help!
PS: Sorry, didn't know the screenshot doesn't work here. So the message I get is "To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website."

See similar topics
http://forums.adobe.com/thread/1169640
http://forums.adobe.com/thread/1175422
P.S. to insert a screenshot use the camera icon in the forum editor.

Can't view flash in Facebook - Anywhere else is fine!

Okay, so new laptop and, no matter what I do, I can't view flash in Facebook. When I click on the video I get an error saying "Flash Player upgrade required". If I click upgrade I am told by the adobe page that my player is already up to date.
I can view flash ANYWHERE else, but not in facebook. If a youtube clip is embedded in facebook I get the error message, but if I click through to the video on youtube and view it directly, it works fine.
I have tried everything. I have tried clearing my cache, deleting the adobe player cache, reinstalling my browser, re-installing flash player. Nothing I do will let me watch flash embedded in facebook. It makes no sense.
I am running Windows 7 - 64bit. Chrome is my browser, but I have exactly the same issue in any browser. I have disabled my virus scanner (avast) but the problem persists. This seems to be a fairly common problem judging by my google searches, but there never seems to be an answer.
This is a new laptop, so hardly anything installed.
Oh, apparently I am running version 10,3,181,22

thetruespin wrote:
Oh, apparently I am running version 10,3,181,22
The latest version is 11.3.300.265

Problems viewing FLASH items

Similar Messages

Maybe you are looking for