Problems viewing my Flash file remotely

Hello
I am in need of someone who can tell me where I am going wrong.
I create a movie on imovie. I take it to Flash(CS3) and publish it as an swf file
I then install that file in Dreamweaver.
All is good I save and preview it locally. the file's root folder is images and same remotely
I upload all including the HTML page and when I view the page, the place where the file is is blank.
I have uploaded this many times and it just wont work.
I have never been lucky with these types of files so I know I'm doing something wrong.
Your help is very appreciated.
thank You
Rob

Sorry still not sure what you mean about a link. I have followed all the advise I could find on youtube and otherplaces about creating a flash file Flash CS3, inserting it on Dreamweaver CS3 and I up load it to my host/server as I have done to every other html, jpeg, bitmap or file successfully before. last night I created a swf of the slideshow I want to have in my index page using Dreamweavers 'sldeshow' feature thinking that this one cannot go wrong and I can preview it on Safari and Firefox at home but when I upload once again all the files that make up that sldeshow(just to make sure) it wont play on my site.
Could my serve/host have anything to do? That is the only think that I never considered because I have certainly checked and re-checked every aspect of this...
Anyway, once again, i thank you for your time.
very Frustrated!

Similar Messages

Is there a way to view adobe flash files?

Is there a way to view adobe flash files?

I've read the same, which is why I included the following:
Content provided via Flash with a website is routed and converted to a compatible format, which may or may not be reliable.

Problem with embedded flash file

My flash file plays properly , when previewed in any
of 3 browsers via Dreamweaver 8.0.2 , but never appears at all when
I bring up the site as an anonymous viewer . I note that if I try
and reload the whole site using a client ftp instead of the
in-built "put" feature in DW , I get a message that "unable to
complete ,because of problem with a file or files" ( I paraphrase)
but that ftp program has no way of identifying which files are the
problem- and there are 600 or so in the site ( site is
www.OrchidsAndMore.org.uk - if it might help to see - the flash
file should be in the middle of the first page.

well, you can 'label' some frames to link inside your flash to those as a 'page'..
But i've allready found it myself :-)
I just had to put 'anchors' in place of 'labels' and than put like: 'index.html#thepage'
super easy!
thanks anyways

Problems viewing large tif files in preview

i'm having trouble viewing large tif files in preview. the tif files are on a cdrom - when i click on the file to open it, it opens only the first 250 pages of the file. the file has approximately 3,000 pages. how can i get preview to open the rest of the pages?
thanks for any suggestions.
mac mini Mac OS X (10.4.6)

no trick - i didn't create the cdrom but it only has 3 tif files with approximately 3000 pages each, not 3000 large tif files. plus several smaller pdf files, but those aren't giving me any problems.
i don't know whether they're compressed, but i still can't get more than the first 250 pages to open, even after copying the file to my desktop. if anyone has any other ideas, i'd much appreciate it.
mac mini Mac OS X (10.4.6)

Problems with panoramic flash files in Director

i have some problems trying to put panoramic photo flash files into director.
I get this software Pano2VR to create 360 and sperical photos in flash format. So finaly i have the swf file.. but when i try put this file in director, does work.
check the flash file here
http://costaricaspirit360.com/
any help
Regards
Ginod

Sean the file is in here:
http://costaricaspirit360.com/sampler/panoSampler.zip
This is one type of swf pano that not work good (flash 9).... but i did what you say... and works fine.
So in the app pano2vr... i export the .swf in flash 8 with no controls layer...
Next, i put this file in my web server and import from director using linking file (internet path)... WORKS FINE.
I still have to make some controls buts but that's fine by me. I'm mac user
Thank's
Ginod

Problem with loading flash files in applet

hi
using JEditpane i can load html pages but it's not supporting gif and flash files.is there any way to open a html page which contains flash and gif files.
please help me...

jeditpane does not support flash files etc, i am not sure if it even support applets if yes probably with some limited way, anyway flash files are not supported, but you can lanch system web browser to show content with flash like internet explorer, latest mustang will suport this

Problem with displaying flash file in UIX page

Hi everybody
I would like to use a flash file (.swf file) above all my UIX pages.
I want to put falsh file in the UIX template file (.uit file) so that
when I create pages based on template, it will be shown on the top of all pages .
Does anybody know if there is a solution for doing this ?
Which UIX tags can be used ?
Best Regards
Navid

Add tht html namespace like
<templateDefinition xmlns="http://xmlns.oracle.com/uix/ui" xmlns:ui="http://xmlns.oracle.com/uix/ui" xmlns:html="http://www.w3.org/TR/REC-html40"
targetNamespace="http://www.example.org"
Then you can add you flash contents at appropriate place.
Like
<html:OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0"
WIDTH="100%" HEIGHT="100%">
<html:PARAM NAME="movie" VALUE="TLT-intro4.swf"></html:PARAM>
<html:PARAM NAME="quality" VALUE="medium"></html:PARAM>
<html:PARAM NAME="bgcolor" VALUE="#000000"> </html:PARAM>
<html:EMBED src="TLT-intro4.swf" quality="medium"
bgcolor="#000000" WIDTH="100"
HEIGHT="100"
TYPE="application/x-shockwave-flash"
PLUGINSPAGE="http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash">
</html:EMBED>
</html:OBJECT>
So you should get your flash working that way. Rest everything is same as getting it work in html.
Regards,
Vijay V

Hello all I am having problems viewing my flash buttons on my website

Hello all I am new to creating my own websites. I am using
DW8. At the moment all is going ok as I have managed to get my home
page up and running, though my website is far from over i have
decieded to add flash buttons. Now when i preview the site in DW8
it shows all the content on the page, however when I actually view
my website (using Firefox) everything shows except the flash
buttons. I have looked and researched everywhere to try and fix
this problem but either don't get what people are talking about or
just can't find the assocciated files. Any help is very
appreciated.
Cheers.

Which DW8? 8.0.2, by chance?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ozballer" <[email protected]> wrote in
message
news:f4bjpb$mto$[email protected]..
> Hello all I am new to creating my own websites. I am
using DW8. At the
> moment
> all is going ok as I have managed to get my home page up
and running,
> though my
> website is far from over i have decieded to add flash
buttons. Now when i
> preview the site in DW8 it shows all the content on the
page, however when
> I
> actually view my website (using Firefox) everything
shows except the flash
> buttons. I have looked and researched everywhere to try
and fix this
> problem
> but either don't get what people are talking about or
just can't find the
> assocciated files. Any help is very appreciated.
>
> Cheers.
>

Problem with Embedding Flash Files

So I'm trying to embed a video I made in flash. I took the file and out and put it into my sites folder and copied some code to place it as an object in my web page via an html snippet. The strange thing is that when I view the video at its URL: http://web.mac.com/jlamb33/docs/success07.swf it looks fine, but when I put it into a page like: http://web.mac.com/jlamb33/AKPsi/Success.html it gets really small and I lose the controller bar. Anyone know what's going on?

Well, the reason I created it in flash was because a lot of my friends couldn't view the video with quicktime, because they don't have it. Anyway, I tried your setup and I can't seem to get it working properly. I copied the anplayer.swf file into my sites folder and copied the code into a snippet but nothings coming up. One thing I noticed is that the source file in the code was changed from the .swf file to .flv&amp. I didn't realize that was a valid extension, but I could be wrong. Any ideas on what's going on? I republished that page with a new snippet under the working movie and as you can see...there's nothing there. http://web.mac.com/jlamb33/AKPsi/Success.html

Problem viewing some video files

I get this problem only with some video files, not all. They are all .mov files so it's hard to tell what is causing it. What it looks like is that the video and sound plays but the video is "barred out" with thick white stripes so it looks like three is only 1 pixel size width of video showing through. almost like this:
"menu bar here"
Just pretend with the dotted lines, you can see the video in it's place. I tried reinstalling quicktime but it does not work. Any ideas

It seems I have two networks available at work, one is behind our firewall, and I login to it. This is the network that I can't view streaming video. There is also a "Guest" network that I don't need to login to. This one works with the YouTube and the news site videos.
Thus, I conclude there is a setting that WiFi network administrators can invoke that specifically can block streaming video on some protocols (whatever the ipod touch uses) and not others (whatever the Macbook uses). But the same router hardware supplying the Guest network does not block these protocols. Presumably this has to do with security on one side of the firewall(?)
Anyway, apparently outside of the WiFi controls available in the ipod touch settings.
Weird...
Paul

After the upgrade to Firefox 3.6.6 for Mac I can't view/hear Flash files

I upgraded to 3.6.6 last night and now this morning I can't see Flash-based files - YouTube videos, embedded YouTube videos, sound files from DivShare, etc. On the YouTube site itself the sound kicks in when you open a video page, but just a blank space where the video should be; same with embedded videos on web pages - just a big blank space. Is there a fix for this?

I´ve got the same problem on my private Mac Book (running latest OSX 10.6.4)! YouTube videos does not display any "Play" (or other "grey control bar" icons... This happened after running the latest Flash Player OSX update 10.1...
The strange thing is that this works fine on my Mac Book Pro (work computer) running the same Firefox V.3.6.6 and OSX 10.6.4. as well as the latest Flash Player OSX update 10.1.
Anyone got any clues on this strange topic?
Best regards,
Morten

Problems viewing HDV .mov file with Intel MacBook

I have a HD QuickTime file exported from FCP HD on G5 PowerPC. I cannot play this file on my intel macbook, I get a white screen.
Any idea why?
Thanks
Brian

You'll need to copy the Apple HDV Codec to your MacBook. Since it won't be Intel native (unless you get FCP 5.1) you'll have to force QuickTime Player to run in Rosetta; it should be a setting in the Get Info window for QT Player. You should then be able to view the video (though I haven't tested this myself).
Hope this helps.

Problems viewing exported .mov file from Mac for viewing on PC

I am working with a reporter who has a PC at home while I am editing a video for her using FCE 4.1 on a MacBook Pro, using HD footage from a Canon Vixia HF20 AVCHD camera. I burned a draft of the video we are working on for her to look at on her home PC, exporting the FCE project as a straight .mov file. But she could not view it on her PC even though she has viewed .mov files on her computer in the past (but this is the first time she has tried to look at .mov file exported from FCE on a Mac). What might the issue here be? Do I need to export the file in a different way? Might she have an older version of Windows Media Player or be unable to view certain versions of .mov files on her computer? Should I hand it off to her instead as an .mp4 file? Any help much appreciated.
Douglas

You'll need to copy the Apple HDV Codec to your MacBook. Since it won't be Intel native (unless you get FCP 5.1) you'll have to force QuickTime Player to run in Rosetta; it should be a setting in the Get Info window for QT Player. You should then be able to view the video (though I haven't tested this myself).
Hope this helps.

Problems viewing embedded flash videos

About 2 weeks ago I had the error message while on Youtube that I needed to update my flash software. I did so and since then I can't see any videos that are embedded on websites. I can see them if I click on the direct link only and it pops up the youtube page, otherwise all I can see is an icon. Is there a way to go back to my older version of flash? I just checked IE manage add ons and it says that I have 9.0.28.0 still enabled, but when I go to the Adobe page that detects what version I am using it says I have the latest version 10.something. I am running I.E. 8 (which I dislike) is it possible to go back to I.E. 7 and avoid all this mess? If so how? I haven't run the latest Windows updates, btw. I do have Google Toolbar which I love. Please don't tell me to get rid of it because it was a pain finding it and installing it after I updated to I.E.8 and it threw it out.
Any help would be appreciated as I need to be able to view embedded videos.

Hi SF, I think at this point you will need to Uninstall and Install the new version of FP 10.0.42.34. The Shockwave Flash
Object Flash10c.ocx did not get installed in manage add ons, even tho you installed FP 10.0.32.18.
Here is the link for the Uninstaller that you will after you click on the "Windows version" SAVE to your desktop:
http://kb2.adobe.com/cps/141/tn_14157.html
Here is the link for the Installer that you will run immediately after Uninstalling:http://get.adobe.com/flashplayer/
This will NOT be saved to your desktop.
(I had an internet outage this morning or I would have posted this sooner)
Follow the instructions completely for the Uninstall and be sure to Reboot TWICE to clear out all old versions. After the Install, Reboot Once.
After you are finished go here to test: http://kb2.adobe.com/cps/155/tn_15507.html
Then test your websites to see if everything is working as it should and post back.
Thanks

Problem Viewing and Opening Files from the Creative Cloud

I am using Photoshop Touch v1.7.5 on an iPad4.
When I try to open an existing file from the creative cloud not all of my files and folders are displayed. My list of folders appear alphabetically and stop at those starting with the letter L. Therefore I cannot open all of my files that have previously been uploaded to the cloud.
Is this a bug or am I missing something here?
If it's a bug, is Adobe working on it?
When can we expect an update?

Here is a link to a conversation I started conceening this very issue.
Version 1.7.5 Manual Sync Failure
I Had concerns about this problem back in November.
It is apparently a bug. Since Adobe has no customer support for the Photoshop Touch app, those of us who primarily make use of the creative cloud and the app are paying for a service that at the moment doesn't completely work.
It is very frustrating that customers paying for a creative clould account and using the photoshop touch app have only this forum as a source of customer support. As a result, you can't depend on receiving information from someone who is actually an Adobe employee.
I hope that Adobe is working to fix this problem. However, we don't really know if or when that may happen because of the lack of information that is supplied.

Problems viewing my Flash file remotely

Similar Messages

Maybe you are looking for