Problems viewing photos im iPod5G when using camera dock connecter

I have a 30Gb 5G Ipod.
I'm having problems with seeing my photos after importing them using the camera connector.
The import process works quite well but when try to see my photos in the Ipod, after select the correct roll#, doesn't appear the browse option and it is impossible to view the photos....Is this a common problem?

I have the same problem. No menu item come up for me to view my downloaded photos. Did you get a reply?

Similar Messages

The problem is with the new operating system and sending photo via email when used in my iPad. From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG

When using Camera RAW after editing photo I can only save file as DNG, I want to save as JPEG. HOW??
THANKS LLOYD

BARBARA,Yes, you are so right, I was deceived by the eve button, Just tried it and it WORKS GREAT-Thanks for the help.
THANKS AGAIN AND HAVE A GOOD DAY Lloyd
From: Barbara B. <[email protected]>
To: Lloyd Bennett <[email protected]>
Sent: Tuesday, January 13, 2015 11:46 AM
Subject: When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
created by Barbara B. in Photoshop Elements - View the full discussionYou are being deceived by the Save button, like most people. That button is not the Save As button, really, but a link to the DNG converter. To save your raw file in an image format, click the Open button instead and then save in the format of your choice in the editor. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7092207#7092207 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7092207#7092207 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

Problem is:
Flash Player for IE11 (which is the worst browser ever developed - BAR NONE) is a Microsoft product, when it comes right down to it.
Adobe writes the base code and yes, they do collaborate on updates for it, but the gang in Redmond alter the plug-in and add "proprietary" code before embedding it, and at that point it's "their baby".
There are two (2) registry keys - 1 for 32 bit IE and the other for 64 bit IE, as well as a KB patch that prevent all but the most experienced Windows users from ever touching the Flash Player plug-in for IE. So there's NO WAY you could have done a clean install of the ActiveX plug-in in Windows 8. Unless you're an uber-geek, you can only update it through Windows Update.
WIn 8 is an abomination and IE11 made it worse. IE has always been the "problem child" of browsers, failing to handle CSS, Javascript, some PHP and most design "tweaks" that good webmasters can use with other browsers, trouble free.
I have IE8 on XP, 9 on VIsta, 11 on 7, 10 on 8 and 11 on 8.1... but they're all for testing only. I'd have to be out of my mind to ever think of using IE as my primary browser. ActiveX controls have to be disabled formost stuff and that opens millions of security holes in IE.
You've got a good video card and a decent sound card. It's a shame to waste them on a pile of garbage like IE, just because it came with Windows.

IPhoto launches when a camera is connected

I recently installed the newest version of iPhoto, and on the first startup it asked me if I wanted "iPhoto to start when a camera is connected to the computer". I mistakenly pressed "yes", and now I can't find anywhere in the preferences where I can turn this feature off. I'd much rather organize the photos on my hard drive before importing them to iPhoto, so I would appreciate it if this feature could be turned off.

Hi A,
Using Image Capture to download images and video clips:
Open up Image Capture which is found in the Applications folder.
When it is opened, go to Image Capture/Preferences
Under the General button choose
Camera: When a camera is connected, open Image Capture.
The next time you connect your camera Image Capture will open.
In the window that opens you will see an Options button. Click on that button to set your options.
To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
iPhoto: How to Change the "Open Automatically" Preference
If you find you can't change any of Image Captures preferences or can't access any drop down menus or they are greyed out, check to make sure Image Capture is loose in the Applications folder and not within a sub folder.

IPhoto 5.0.4 not launching when digital camera is connected

Normally my iphoto opens automatically when I plug in my camera. But today it decided not to work- I've tried unplugging and replugging but to no avail. I'd appreciate all the help I can get. My camera model is Sony DSC-T1 (silver).
I also had some issues with my Cinema Display- for some reason the screen is blank when I turn on the computer- it's only when I unplug the power supply and replug it than it wakes up. I'm not sure if this has anything to do with the power supply.
Thanks
Power Mac G5 Dual Processor 2.3 Ghz Mac OS X (10.4.7)
Power Mac G5 Mac OS X (10.4.7)

Hi there,
Just out of curiousity are you still able to download your images?
I do not have my iPhoto set up to automatically open when a camera is connected to my machine, but if I do open iPhoto, it does connect with camera and I am able to down load images.
PhillyPhan gave great advice and if you tried all 3, I'm stumped but if you can still download photos, then it's some kind of preference that needs to be adjusted... please let us know...
Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black - Mac OS X (10.4.7) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

I have problems viewing photos in blogs using Blogger

I have a couple of blogs that I frequent and lately (within the last month or so), I am having trouble viewing photos the bloggers have posted. Sometimes the first photo will seem to load, but by the time the entire page has loaded, where there is a photo, all I can see if a small rectangle. These are bloggers who are using Blogspot/Blogger. No one else seems to be having a similar problem.
I have Firefox 3.6.13.
I have tried all the recommended things, clear cache, cookies etc. and I still can't see the photos.

Thanks cor-el
Tried all of the suggestions and it seems not to be due to an extension or theme.
The problem only seems to occur on blogs at the *.blogspot.com address, who are using Blogger software.
I wonder if there is some incompatibility between a recent version of Blogger and Firefox?? I have tried contacting Blogger, to see if there are problems, with no success, although I have found 2-year-old posts on the Web indicating some problems at that time -- nothing recent though and no suggested fix.
Any ideas?
Mary Anne

Problems creating a new folder when using webmail

Hi, has anyone else out there encountered problems when trying to create a new folder when using webmail ?
It just seems to create a new folder called 'New Folder' and misses out the step that would normally allow you to rename it to a title of your choice.
A whole list of folders called 'New Folder' is about as useful as an ashtray on a motorbike.
It did used to work as I've used it many times in the past.....but then so did a lot of things before the 'new' and 'improved' version of BT Mail came along.
Any help or suggestions gratefully received (apart from the obvious solution, switch to a mail client).
Maybe it needs flagging to the 'techies'......they must be really busy trying to sort out all the so called teething problems.
Solved!
Go to Solution.

What should happen is that when you click on the + for add a new folder a box should appear, somewhere amongst the folder list. (The list is in alphabetical order so if you have a number of folders previous to the letter N it maybe out of view ) .
The box will have the text " New folder-X," ( see below for the explantion for the -X ) you then delete the text, type in the name you want, hit enter and there it is.
If you don't notice the box, possibly because it's off screen further down the list, you then open and close the list, or log out the next time you view the list it, or they, are simply named New folder.
So you now have umpteen " New folders ", here's how to rename them.
Place your cursor on the word New Folder in your folder list, you will see a little box appear with" New folder-X," x being the number of the new folders you have created., eg -0, -1, -2 etc.
Then double click on it, you should then get a larger box with New folder-X.
Delete the text in the box, type in the name you want for the new folder, hit enter there's you newly named folder.

Workaround: SWVMS16 Crash when using Camera Search Function

When using the camera search functionality, SWVMS16 may crash. The issue is caused when non-camera UPnP devices on the network send out large packet sizes. Upcoming video monitoring releases will fix this issue.
Workaround: If the issue occurs, add your cameras manually to the SWVMS16.
SWVMS16 v1.21 Release Notes posted online.
http://www.cisco.com/en/US/docs/security/csbvsc/swvms16/release/notes/Release_Notes_VMS.pdf
Attached file shows the error message and the steps to manually add cameras to the SWVMS16.

Hi agschin and welcome to the RH forums. The hhactivex.dll
file is not used by the search function so you can rule that our.
Have you tried recompiling and seeing if the problem still happens?
You can also start the Bug Hunter feature in RH - View > Output
View and then select the Bug Hunter button - and see if that throws
up any clues.

Problem with variables in formulas when using CrystalReportViewer

Post Author: Aksu
CA Forum: Formula
Hi! I have a problem with variables in Crystal Reports formulas, when using CrystalDecisions.Windows.Forms.CrystalReportViewer class from VS2005-project. ReportViewer always gives error:*************Crystal Report Windows Forms ViewerThis field name is not known.Details: errorKindError in File C:\{dir]}\{file}.rpt:Error in formula <mCustomerAttributes>.'Dim result As String'This field name is not known.Details: errorKind ************* Report without variables works fine with Viewer and in Crystal Reports Designer report with variables works also fine. I have tried with both "formula-syntaxes" - basic and crystal. But Viewer always gives error when trying to define new variable.I think the problem might be with CR -versions, because VS-project has formerly been designed to VS2003 and CR9 or 10. Now I'm using VS2005 and CR11. Though I have changed all references to new CrystalDecisions-asseblies (Ver.11.0.3300.0), when I debug the project and checkout the Viewers ReportSources FormatEngine Shows version CR9_2.... I have no idea where it gets this version...***************DEBUG-view when Viewer is created *******************CrystalReportViewer |_ ReportSourceClassFactoryName ... , Version=11.0.3300.0 , ... |_ ReportSource |_ FormatEngine {CrystalDecisions.CrystalReports.Engine.FormatEngine} |_ ClientVersionHeader {CrystalDecisions.Shared.ReportServiceVersionHeader} |_ | version = 920 (int) |_ Static members |_ VER_CR9 = 920 (int)**************************************** Could anyone have any answers or tips for this problem? I'd really appreciate it... ---Aksu

Has anyone been able to answer this question?
I am having the same problem:
I am designing a report in Crystal Reports XI Developer that contains parameters, which are passed to a stored procedure and are also used within formulas ( in Crystal Syntax ie. {?FORMAT_ID} ) in the report itself.
I can run the report successfully in CRXI Developer. The formulas use the correct values from the parameters entered during execution and everything looks good.
I then deploy the report to Business Objects Enterprise XI. I do all of the things necessary to manage the report including setting up the proper database connection information and default parameter values.
When I run the report using the Crystal Report Viewer, I get the following error message:
Error in File Forecasting.rpt:
Error in formula <Report Format>.
'if (not isNull({?FORMAT_ID} ) ) then
This field name is not known.
Details: errorKind
This happens when I press the "Preview" button in the Manage Object dialog from Crystal or when I run the report using InfoView.
I have changed the formulas and it doesn't seem to matter what the specific content of the formula is; other than the existence of a parameter reference in the formula. If I comment out the parameter and replace it with a hard-coded value, it gets through the formula fine.
Does Business Objects Enterprise XI support crystal reports with parameter references in the formulas?
Thanks,
Tim H.
Edited by: Tim Haley on Nov 25, 2008 11:11 PM
Edited by: Tim Haley on Nov 25, 2008 11:12 PM

Just Installed Firefox 6.0.2 And I'm Having Many Problems On Some Web Sites When Using Firefox:

-When I click on a picture on some sites it will go to the next page with a large view of the picture and then when I go back one page to do the same with another picture (or even the same picture) nothing happens.
-Videos don't show up or on some sites the videos do show up and work but you can't make them full screen. (YouTube works fine).
-Sometimes I have to click "Reload" to get my saved codes to show up.
-It won't let me log onto some sites unless I right click where it says "sign in" and click "open link in new tab".
-In some Forums the tool bars, smileys, etc. don't work when using Firefox or IE9 and they worked before with IE9.
-Some of my letters when viewed with IE9 are now in some kind of code (maybe html?).
I never had these problems before when using IE9 alone!
Java was updated before I installed Firefox and I installed the Adobe Flash Player 10 plugin right after installing Firefox. My OS is Windows 7 64-bit.
Please Help. Thank You

Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

Problem in Master Detail form when using ADF table for Detail

hi,
jdev version-11.1.2.1.0
i have create Master detail form using datacontrol drag as ADF Master Form Detail Table.
Now when i create a new row in Detail table using CreateInsert button a blank new row created on the top of detail table.
and other row show that data of previous record based on master.
problem is that i want when i click on createInsert button all row of detail table should be blank and when user fill two or three row then commit.
Thanks in Advance

Hi,
if a detail table has data, then createInsert adds to these. If you want to hide existing rows, create a new View Object instance and set its "Retrieve from the Database" option to "No Rows". The use an af:switcher to change the table shown when the user clicks the createInsert button. There is a bit of coding required to have this use case in ADF, but its mostly declarative. Bottom line is that there is no automated option other than creating new rows in a separate page or dialog if you are bothered by existing rows
Frank

Problems viewing photos in iPhoto 11

I recently upgraded to iPhoto 11 and I am running Lion. In Events, no key photos show (all are black) although all the photos are there, because I can see tiny thumbnails when I am in the Photos screen. Also, when I double click to try to open a singular photo, I get a black screen with a triangle/exclamation point. Any answers out there for why my photos are not viewing properly? Thanks.

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Printer Driver Problem? Page margins shift when using paper tray vs. manual feed

I am printing to an Apple LaserWriter 12/640 PS. The printed page and page margins are PERFECT (WYSIWYG; "What you see is what you get") when printing either to: (a) the MANUAL FEED TRAY of the Apple LaserWriter 12/640 PS; or (b) PDF to view on screen.
HOWEVER, when printing to the LaserWriter using the (ordinary/usual) paper cassette (you know, the thing that holds the 200+ sheeets of blank paper), two margin problems occur: (1) the uppermost portion of page content is shifted down 3/4" (maybe closer to 11/16") vs. its position on the manually fed paper. This, in turn, causes the botttom portion of the page content to run off below the printed page. (2) The "unprintable region" on the right edge of the paper expands from 1/8" with the manually fed paper to 7/16" when using the paper cassette. This shows up as an extra 5/16" (7/16" - 1/8" = 5/16") of white space/missing page content on the right edge.
The problem is consistent and reproduceable. It happens with cassette fed output from Safari, Word 2011, Acrobat X, TurboTax, Quicken Essentials for Mac, and TextEdit.
BIG problem when printing long documents whose content and margin settings I cannot control (e.g., third-party documents from Acrobat, anything from Quicken Essentials or TurboTax, pages from Safari, etc.). The only workaround is to feed everything manually (UGGH!).
I suspect the printer driver is faulty since the problem detailed above happens with so many applications. Is there a way to edit a plist (using the application/utility "Pref Setter" or similar) to overide the driver's margin settings?
I believe the print driver is "Apple LaserWriter 12/640 PS v2015.105" (from Sytem Prefences->Print&Scan->Options and Supplies->Driver).
Any help greatly appreceated.

Thanks! It works perfectly! I even saved my original "oversize" document by printing it to PDF with the scaling so the problem is permanently cured, at least for this document.

Problem viewing photos in PE Organiser

Desperately need help with a problem viewing my pics in PE 9 Organiser. Many (most) of my photos will not display properly - instead, in their frames are yellow (?)'s in the upper left hand corner and blue (?)'s in the center. That is the situation whether I am in the "thumbnail" display or the "import batch" mode of "Display".
Strangely, I have used a number of these photos in an album recently and they displayed perfectly then.
Anyone have a clue???
Thanks tons.
Sam

Saurabhh:
It seems you are absolutely right on about the missing files. My only problem now is to figure how to restore about sixty
photos to the links -- maybe I should just delete the links?
I have another problem whch you may be able to help me with if you don't mind. I've discovered that my DVD Player only recognizes .jpg or .mpg format and my Photo Elements wants to create the slideshows in .wmv. Any suggestion sfor changing that.
Thanks

Problems viewing photos im iPod5G when using camera dock connecter

Similar Messages

Maybe you are looking for