Problems w/ Essbase 9.3.1 Installation

Hi, I am new to essbase. i have installed shared services, essbase server, and admin services to a winxp machine. after going thru all the steps in the config util and deploying all services to tomcat, rebooted machine, and started all services (shared services, ldap, bi+ analytics, and admin services), I wasn't able to see the essbase server inside shared services. the only component i could see inside shared services project folder is "business rules." if the installation was done properly, i should be able to see "Analytic Server:Servername" inside the project folder in hss. Also, I could not see the essbase server w/in the admin svc console. would anyone know what i have done wrong in the installation? i can't seem to get past this point.
when i first install, i installed in this order: hss, eas, essbase server. then i uninstalled and reinstalled in this order: hss essbase server, eas. however, i noticed that the tomcat component and settings remained and not all the directories were deleted. after second installation, it looked like there were leftover setting from 1st time installation. any suggestions? would really appreciate help w/ this. thx.
ken

Hey,
looks like we have many experts on the Essbase Excel Add-in here.
I have a problem that I haven't been able to resolve:
When I use the Essbase Menu in Excel to connect to the Essbase cubes, the login screen comes up and after all credentials are provided and the OK button is clicked all accessible cubes are displayed but after selecting a cube and clicking on OK the login portal does not go away.
It just stays there and the excel is not connected to the server.
I'm using Essbase Excel addin version 9.2.1, and I have already tried out un-installing and re-installing the Excel Addin.
Please help me out here, I have no clue whats going on.
Regards,
Anindyo

Similar Messages

Problem with machine rebooting. Essbase 11.1.1 installation.

Hi all,
I have a problem with my Essbase 11.1.1 installation. In a nutshell when I reboot the machine I can't log in EAS anymore. The only way I found out is just reconfigur EPM system after rebooting but It's just a work around.
Thanks for helping

Hi user,
AsI read between lines, it seems that you previously were able to access EAS so your installlation is not the problem but you accessing to EAS isthe problem. As you mentioned you are having problems accessing it after rebooting the server, I think it could be a prolem with the services. Please try stopping all the services in this order:
administration servicese
Essbase services 11.1.1.1_Hypservice_1
Foundation
Openldap
and then restart them from bottom to top. Let me know.
J.

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

TS3074 im can u please help me out this issue im trying to install iTunes in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

im can u please help me out this issue im trying to install iTunes in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

Try the following user tip:
" ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows

"problem with shortcut/fatal error during installation" on other user accts

I-tunes installed and works with no problem in original user, but when another user account attempts to open Itunes, program attempts to install/configure again, then results in a "problem with shortcut / fatal error during installation" message. Setting the other users to administrators doesn't help, nor does un-installing/re-installing, etc. I am at least the 4th person with this problem (see Burthomp earlier today,Jan. 17 and Richard 1018 on Dec. 29). This problem started with Itunes 7.5, and is still a problem on Itunes 7.6. I have a standard Dell setup, Model E510. There must be a lot of people with this problem. Apple, are you working on this? Anyone else have a suggestion?

I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.

Problem with Essbase add-in 9.2.1 and office 2010.

Hi all,
we have a problem with Essbase add in 9.2.1 and office 2010.
Every time when a user opens Excel a new (additionally) euntry in the ad-on menue appears.
Indeed what happens is, that the add-in is loaded n-times.
At the first start of excel one time, second two times and so on...
Thtas's very annoying.
Can someone confirm this issue or even better know a workaround.
(A way we have found so far to ease the pain a bit -well only temporary- is to disable the ad-in, close Excel and start it again.
However with every new start of execel the issues begins again.
But that's not a solution you can recommand to the end user.)
Any help is welcome.
Thank you in advance!
Andre

Have a read of the following on Oracle Support - Support for Office 2010 in Essbase Excel Add-In and Smart View [ID 1191235.1]
Cheers
John
http://john-goodwin.blogspot.com/

Problem with 10.3.181.34 Installer

I recently refreshed my Flash install and ran into a strange problem. When I executed the installer named install_flashplayer10ax_gtbd_aih.exe, it deleted itself and never successfully installed. After looking at Procmon, I noticed that it made copies of itself and added _1 to the filename until it hit the limit of the filename length and stopped. Each iteration would be a new process. I compared my system to one that didn't have this problem and I noticed my TEMP and TMP variables were pointing to %systemroot%\temp instead of %userprofile%\temp. After restoring the correct temp variables, the installed completed successfully. I hope this helps somebody who finds this through the Google.

I'm going to memorize that link. I usually never have to time to Google this site until I find a REAL installer for their products instead of links to whatever conten
t caching delivery mechanism they are using this month. I can't tell you how many people I run across with McAfee Security Scanner or a Google toolbar they never use. It will be a good day when Flash isn't the de facto standard for rich media on the internet.

HT1926 I updated the Itunes on my computer and it begin having problems. I tryed a new installation and there is a message saying an application has made an attempt to load C runtime library incorrectly. What shoul I do?

I updated the Itunes on my computer and it begin having problems. I tryed a new installation and there is a message saying an application has made an attempt to load C runtime library incorrectly. What shoul I do?

Hello rvalle3,
The following article can help get iTunes updated and running again.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen

Essbase 9.3.1 installation errors

Hi,
I am trying to install and re-install Essbase 9.3.1, since last couple of days on my widows pc. I know the installation sequence now, but still facing below mentioned problems
* After installing and configuring shared services I am unable to login to "http://localhost:58080/interop" with the default user id "admin" and password as "password". Is this the correct way or do I need to create a user called "admin" somewhere?
* If I continue to install esb_client & esb_server installations after that and also configuring the same. I get the error msg "registration parameters are not valid" while configuring.
Also, the "http://localhost:58080/interop" link which was opening before ceases to open even though the shared services are running as a windows service in background.
I am more or less following instructions mentioned in the following blog and also referring to Oracle documentation:
* http://www.rittmanmead.com/2007/09/22/getting-up-and-running-with-essbase-part-1/
* http://www.rittmanmead.com/2007/09/22/getting-up-and-running-with-essbase-part-2/
Any pointers will be helpful as this is the first time I am installing this software.
Thanks in advance..

Thanks for replying John.
I am using Windows Vista Business Edition with Service Pack 1 installed.
I tried again everything. I followed the sequence and rebooted my laptop after every install and configuration.
Somehow I was able to get the Shared Services up and running. I was able to log-in using default user id "admin" and password as "password". Even i ran shared services manually as you mentioned and checked that no errors were getting generated. The connection with database and appserver were fine.
But unfortunately, after I installed the esb_client (Rebooted after install) and esb_server (Rebooted after install), I ran the configuration utility to configure essbase server. It did not configure and prompted an error "Registration parameters are not valid".
Then I tried to check whether my Shared Services are running fine by manually starting them again. But this time it threw lot of errors with one of them being "unable to connect to database". This is really strange as there was no issue with Shared Services before the esb_client and esb_server install. I even tried logging into "http://localhost:58080/interop" but was unsuccessful and got the same error "user:admin not found".
I am thinking of uninstalling and reinstalling everything again.
Please help and let me know what shoud I do? Is essbase 9.3.1 compatible with Vista Business Edition?
Also let me know if you need any output of my log files.
Thanks in Advance..
Gaurav

Essbase 11.1.2 installation error

Hi All,
I have installed the EPM(Essbase) first time
1) Essbase 11.1.2 server part 1 and 2,
2) client ,
3) foundation part1,2,3,4
4) additional contents
and the installation was successful.
But i found two exceptions in the log file.
I don't know what problem it will cause during configuration.
=======Exception===========
2010-08-04T18:03:09.512+05:30] [EPMINS] [WARNING] [EPMINS-00633] [oracle.EPMINS] [tid: 20] [SRC_CLASS: com.hyperion.cis.ConfigToolProductInfo] Failed to create task dependencies file:[[
java.io.IOException: entry 1cee8000bb4b02b8dcf0fe6fa13a8764/configtoolproductXmlWrite1_dependencyFile does not exist in E:\Ayush\assemblies\essbase_administration_services_webapp\11.1.2.0\assembly.dat
     at com.installshield.boot.streamhandler.ZipURLConnection.getInputStream(Unknown Source)
     at java.net.URL.openStream(URL.java:1009)
     at com.installshield.wizard.service.AbstractWizardServices.getApplicationResource(Unknown Source)
     at com.installshield.wizard.service.AbstractWizardServices.getApplicationResource(Unknown Source)
     at com.installshield.wizard.service.AbstractWizardServices.getResource(Unknown Source)
     at com.installshield.wizard.Wizard.getResource(Wizard.java:1958)
     at com.installshield.wizard.WizardBean.getResource(Unknown Source)
     at com.hyperion.cis.ConfigToolProductInfo.execute(ConfigToolProductInfo.java:117)
     at com.installshield.wizard.StandardWizardListener.execute(Unknown Source)
     at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
     at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1822)
==============================
[2010-08-04T18:03:13.574+05:30] [EPMINS] [WARNING] [EPMINS-00633] [oracle.EPMINS] [tid: 20] [SRC_CLASS: com.hyperion.cis.ConfigToolProductInfo] Failed to create task dependencies file:[[
java.io.IOException: entry 49fba5f0a4a94a9deec21d590783083b/ConfigtoolProductInfo_dependencyFile does not exist in E:\Ayush\assemblies\essbase_studio_services\11.1.2.0\assembly.dat
     at com.installshield.boot.streamhandler.ZipURLConnection.getInputStream(Unknown Source)
     at java.net.URL.openStream(URL.java:1009)
     at com.installshield.wizard.service.AbstractWizardServices.getApplicationResource(Unknown Source)
     at com.installshield.wizard.service.AbstractWizardServices.getApplicationResource(Unknown Source)
     at com.installshield.wizard.service.AbstractWizardServices.getResource(Unknown Source)
     at com.installshield.wizard.Wizard.getResource(Wizard.java:1958)
     at com.installshield.wizard.WizardBean.getResource(Unknown Source)
     at com.hyperion.cis.ConfigToolProductInfo.execute(ConfigToolProductInfo.java:117)
     at com.installshield.wizard.StandardWizardListener.execute(Unknown Source)
     at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
     at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1822)
====================================
Please help me to resolve these issues
Thanks in advance
Ayush

How do you know it is a definite problem, I have seen errors in the installation logs it doesn't always mean there is a problem.
Cheers
John
http://john-goodwin.blogspot.com/

Problem with HP LaserJet M1319f MFP installation

Dear support team and community members,
I'm currently trying to install HP LaserJet M1319f MFP connected by USB on Lenovo Q190 machine /Intel Core i3 processor/ running freshly installed Windows 7 Enterprise 64 bit with Bulgarian
language pack, all current updates, Microsoft Forefront Protection /I also tried to disable the Real-time protection/, UAC disabled, administrator account, IE 11, .NET Framework 4.5.1.
The priter was working correctly with Windows XP.
I downloaded the driver package from the official hp website.
After the installation process reach the "Copying files to the hard drive" stage the installer return error Printer Software Installer stopped working.
I tried running with Administrator privileges and/or Windows XP SP3 compatibility mode, but the same error occurs.
I tried Microsoft Fix It software for install/uninstall drivers too,but with no luck either.
I cleaned the cashe and temporary files around 10-15 times.
Windows update is not helping with the drivers too.
I tried to extract the files from the installer and manually add the printer and got error that the installation was not successful and below it says The file was not found /if I recall it correctly/
After that I tried HP Print and Scan Doctor software, but it displays that there is no driver installed and redirecting me to the driver download page.
I tried the Driver Wizard software too, but it returns that this model is no supported.
I tried to change the windows startup to "Selective startup" with "Load startup items" unchecked and all non-microsoft services disabled, but with no success.
Under Safe mode the install won't complete because of the Print Spooler service not running, which is running normally otherwise.
The "ntprint.inf" file is present in the "Windows\inf" folder, the registry HKLM\SYSTEM\CurrentControlSet\Control\Print\Enviroments\Windows NT x86 has only Drivers and Print
Processors subkeys and the registry HKLM\SYSTEM\CurrentControlSet\Control\Print\Monitors has only Local Port, Microsoft Shared Fax monitor, Standard TCP/IP Port, USB monitor and WSD port subkeys.
The folders Windows\System32\spool\PRINTERS and Windows\System32\spool\drivers\W32X86 are empty.
I ran sfc /scannow in cmd with administrator privileges, but there was no integrity violations.
I tried to disable the IE component, but no luck either.
So now I’m out of any ideas how to connect that **bleep** thing… I hope that someone can help me with this issue.
Currently the devices without installed driver in the Device Manager are "Hewlett-PackardHP LaserJet M1319f MFP" /Hardware IDs USBPRINT\Hewlett-PackardHP_La28A1 and Hewlett-PackardHP_La28A1/
and HP Scan /Hardware IDs USB\VID_03F0&PID_5817&REV_0100&MI_00 and USB\VID_03F0&PID_5817&MI_00/
I forgot to mention that I tried all kind of variations with these solutions with and without printer plugged in.
Thank you very much in advance for any kind of guidelines.
Best regards,
Ivan

Hello Rick,
Just as I mentioned above I'm using Microsoft Forefront Protection, but had no luck with disabling the Real-time protection - it is disabled,
but that chanage nothing.
The downloaded driver is for Windows 7 64 bit.
I did write to HP but I still got no answer from them... I already checked that support page, but I didn't get any information corresponding
to my problem, not to mention that a lot of that page is just copy/paste from another product and it's not relevant to that model.

Problems with track pad and osx installation disc on macbok.

Okay so I am having two separate problems with my macbook.
First, the track pad, or the button beneath it, is pretty much completely out of commission. When I try and use it, the computer acts as if I am holding down the button all the time. Example, when I drag it across the desktop, the "click-and-drag" square starts appearing next to the cursor or when move the cursor on an icon, it tries to click and drag that. The only way that I can fix it thus far is to hook up my wireless mouse. Hoping someone else has a better solution so that I can continue to use the notebook on the go without having to bring the mouse. Note: the button does not appear to be depressed in anyway.
Second problem is happening when I attempt to reboot the computer with the OS X Leopard disk in for a re-installation. When the gray start-up screen appears, before the gray apple comes on the middle of the screen, a folder icon with a question mark on it appears for a split second and then turns into the normal apple icon after which my OSX disk is spit out of the drive and the computer boots straight to the desktop. I have attempted holding down the control button, the option button, and starting the process while the computer is still turned on and then just restarting it, the disc is ejected upon restart every time. I have reinstalled the OS with this disk once before and it has worked fine and other disks seem to be working fine in the drive, so I am at a lost here.
I know that was a lot of info but if anyone out there can help me out with either one of these problems it would be much appreciated.
Thanks.

exactly the same issu with the track pad here.
I v tried to use it without the battery but the problem persist.
If I use an USB mouse i can move it arnd but wen I click or double click nothing happen...so is useless.Same problem with the Blur Tooth wireless mouse.
The issue appear several months ago...after a couple of weeks went away, and now is back again. I try the routine manteinance but nothing solved the issue.
Any suggestion? I have some urgent work to do ...I will try tomorrow to bring it in an apple store but I can't leave it with them ..
Thanx in advance

Space Problem in G: - after NW2004s SR1 installation on Windows 2003 server

HI Friends,
I have installed NW2004s SR1 on Windows 2003 server with Oracle 10g database successfully. My server has sufficient harddisk space as follows.
C: 9.6GB
G: 24GB
H:64GB & I: 73GB.
RAM is 6GB
While installing NW2004s i have defined a paging size on C: 400MB-1600MB and
i have set the option as System Manageble on other drives G, H& I drives. I did not get any Swap space problem while installing.
During installation I have chosen G: drive to store MirrorlogA, MirrorlogB, Oraarch, OriglogA, OriglogB folders of Oracle for redolog archives,.Total size of all these folders is 17.4 GB
G: drive has one more folder Program files which is of 155KB and no other files exist in it.
But My system says that I am running out of Space on G: drive and free space available now is only 44MB.
My question is where has the rest 5GB of space gone? Is it consumed as a part of Paging file which i have set on this drive as System manageble??
I have set the same option on other drives too i..e H & I. But i am not facing any space issues for these drives.
What could be going wrong?? Please suggest me how to correct this
Thanks
mv_d

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

Problem with Oracle 8.1.7 Installation on UNIX AIX 4.3

Hi,
I tried to install Oracle Enterprise Edition on UNIX AIX system. After all pre installation task, when I run the installer (./runInstaller) I have the following error message:
java.lang.InternalError: Can't connect to X11 window server using '192.168.0.150
:0.0' as the value of the DISPLAY variable.
Please help me to fix my problem
Thanks
Omer

Is the machine you're trying to install on the
machine your display is running on?
If not, doing a
'xhost + name_of_machine_you_are_installing_on'
on the machine your display is running on should do the
trick.
Hope that helps.
M. Geselle

Problems w/ Essbase 9.3.1 Installation

Similar Messages

Maybe you are looking for