Problems w/ ipod nano and iLive dock
My ipod nano no longer worksproperly with my iLive dock (IH319B). The remote control does not control the ipod. It works fine for the the rest of the iLive -- radio, CD's -- but not for the ipod. Can anyone give me suggestions??
Contact the dock manufacturer.
Similar Messages
-
HT4623 Is there any compatibility problem between iPod 4 and Bose docks?
Is there any compatibility problem beteween ipod touch 4 and Bose docks?
What does Bose say? Make sure you look for a 4G with iOS 6.
I do not recall being aproblem with iOS 6 but with 7 I think yes.
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset the dock
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
IPod Nano and universal dock with remote.
i am looking to dock my nano on the universal dock and use it to connect to my stereo with the remote to change songs should i get the av connections kit. does the remote work well
i got it and i think it works perfectly fine, excepional even.
Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span> -
I have purchased a new iPod Nano and have tried repeatedly to set it up but iTunes will not recognise it. I have 5 other devices connected to my itunes account so is this the problem and what can I do?
There is no 5 device limit. There is a 5 computer limit.
Device not detected in iTunes -
Ipod Nano and Dension/Blaupunkt ICE links
Hi,
I have been attempting to connect my Ipod Nano to the
audio system in my car using both the Dension ICE Link Plus and the Blaupunkt Ipod Interface Cable. Both give control of the Nano from the head unit CD changer controls, but neither gives any audio. Both work perfectly with my wifes Ipod Mini, with full audio, so I'm wondering if there is a compatibility issue with the Nano, or I there is just a problem with my specific one.
Dension claim compatibility for their ICE Link Plus, but Blaupunkt don't for their cable. As the Nano has the standard dock connecter I just expected to plug in and go.
Anyone tried either of these with the Nano and had success?
Any suggestions as to whether its likely to be a problem with my Nano, and what I should do if it is?
Cheers
Will.Try a reset of the Nano and if that fails try a restore from the iPod updater. There has been several posts related to lack of audio output on the Nano inconjuction with various accessories where a Reset or Restore corrected the problem.
To reset Nano, press and hold the Menu and Select buttons until the Apple logo appears. You should have to hold the buttons down for about 6 to 10 seconds.
To restore your Nano, download the latest iPod updater and install the application. Run the updater with your iPod connected and select restore. The updated can be download from --> http://www.apple.com/ipod/download/
Best Regards-
Randy -
IPod nano and Altec Lansing inMotion im5, clicks between tracks?
When I'm using my iPod nano with the Altec Lansing inMotion im5 there are 'clicks' between the tracks. When I'm using my iPod headphone I don't hear these 'clicks'. What could be wrong?
I've been playing around with my iPod nano and the im5 speaker system. I guess that the clicks might be caused by a gap (longer than 5 seconds) between the songs. It would have been no problem when the iPod should have a crossfade playback like iTunes has. I haven't heard the clicks when I use the iPod dock. The one I heard was just a strange end of a song....sorry!
Inox -
I have an ipod nano and use one click digital to download books from my library. My nano says I have 2449 songs which is about 65 books. I have deleted all my playlists after I listen to the audiobook. Now I get a message saying I don't have enough room on my nano to transfer new books to it. My nano is 16 GB and my operating system is Windows 7.
iTunes and Apple's devices work as an ecosystem. iTunes is designed to sync with Apple's products, not anyone else's. You'll need your songs in a format compatable with the Samsung phone and to use the software transfer program supplied/recommended. It is essentially not an Apple/iTunes problem. You may have better luck finding the information you need on Samsung's forums.
tt2 -
Hi, I have a 7th gen ipod nano and am having a problem with deleting songs. I can select the track in my ipod's library but right clicking does not bring up the option to delet. I have downloaded the latest update for the ipod but this has not solved the issue. Can anyone suggest a remedy? thanks
Hello Lor100,
In order to delete or add individual songs from and to your iPod, you'll need to enable 'manual mode' on the device. This will allow you to add and remove exactly the content you desire.
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
Cheers,
Allen -
I have rec'd an iPod Nano and can't get it to sync with my existing playlist. I am using a Windows 8 Dell laptop. Any suggestions?
One iCloud account has one user name (a .mac or .me email name) and password. If you have set up multiple accounts in the past then you must choose one and stay with it. If you don't know the user name, then you have a problem. If you haven't really begun using iCloud (but you mention trying to get mail, so I'm assuming you have used iCloud before), then use a .mac or .me account you know you have or just sign up for a new account - and be sure to write down the name and password for future use.
If you want to use the account to sync your contacts, email, calendars, etc, then each of your ios devices need to use the same account, otherwise they will be independent of one another. -
New IPOD nano and getting HKEY_LOCAL_Machine\software\Classes\quicktime
I tried to install the software for my new iPod Nano and it would nto load for this message:
could not open key: HKEYLOCALMACHINE\Software\Classes\QuickTime,QuickTime\CLSID. Verify that you have sufficient access to that key, or contact your support personnel. I've tried shutting off the firewall and made APPLE a trusted site. I even removed the old Quicktime from my computer and this did not work. Please help this not very tech savvy old lady.I had a similar error:
Could not open key:
HKEYLOCALMACHINE\Software\Classes\QuickTimePlayerLib
.QuickTimePlayerApp\CLSID. Verify that you have
sufficient access to that key, or contact your
support personel.
Apple help told me it was a Windows problem and that
I needed the Service Pack 2 (SP2). I already had that
update, so that alone was not the problem. In surfing
the net, I found an answer for my error that worked
on bleepingcomputer.com from HitSquad. Here it is, it
may work for you too:
Click Start>Run and type "regedit" (without the
quotes)in the Run dialog box and click OK. This will
open the Windows Registry Editor. In the left side of
the window, navigate to the path in the error
message. HKEYLOCALMACHINE is the top folder,
Software is the next folder, etc., etc. Right click
on the Quicktime.qt folder and select
"Permissions...". In the Security tab, it should list
Group or user names you have. Select a user name and
in the lower part of the window, make sure "Full
Control" and "Read" have check marks under "Allow".
Click "Apply". Now log back on under the username
listed in the upper part of the window.
Mine had a strange twist, even though I am an
Adminstrator on my computer, for some reason, my user
name was not listed. My son's user name was - maybe
because he loaded the itunes initially? I changed his
account to administrator and loaded itunes and
QuickTime under his name and the error went away.
Anyway, itunes 7 is now working. I'm no expert, but
this worked for me. Good Luck!
JB
This was a fix for me. I have to use my wifes log in to windows. I think she might have loaded the itunes a while ago under her log in. Good Luck everyone. At least now I can use my 80 gig ipod for something else than a paper weight. I must say though, Microsoft would have had a fix by now for this.
Good night and good luck,
Chief -
Please help, iPod Nano and iTunes issues
1. I can't update my iPod Product Red. I've downloaded the update, and when I click "update" in iTunes, it just sits there for hours saying its updating
2. The first time I start windows, connect my iPod Nano and then start iTunes (or even the other way around, start itunes then connect ipod), my nano doesn't show up in itunes. I need to restart the service after plugging in the nano every single time!
3. I cant restore my iPod Nano either, the same problem with the updating my ipod, the progress screen just goes back and forth for hours without doing anything, infact my nano just seems like it looses synch during both an update and a restore, because the do not disconnect message on the screen goes away once either update or restore process is started.
Please help! This is my first ipod purchase and so far it is really disappointing me and frustrating, thanks
-Alex1. I can't update my iPod Product Red. I've downloaded the update, and when I click "update" in iTunes, it just sits there for hours saying its updating
2. The first time I start windows, connect my iPod Nano and then start iTunes (or even the other way around, start itunes then connect ipod), my nano doesn't show up in itunes. I need to restart the service after plugging in the nano every single time!
3. I cant restore my iPod Nano either, the same problem with the updating my ipod, the progress screen just goes back and forth for hours without doing anything, infact my nano just seems like it looses synch during both an update and a restore, because the do not disconnect message on the screen goes away once either update or restore process is started.
with that particular set of symptoms, first check on the possibility described in the following document:
iTunes for Windows: iTunes 7 doesn't recognize iPod -
I am going to japan with an Ipod nano and Iphone 4. Do I need a converter? or does the one the iphone comes with that plugs into the wall enough? I know i wont need an adapter because it will fit into the wall outlet, but voltage wise, will i need a converter? Japan runs on 100 V. I am so confused on all of this...
As long as the adapter is 2 pronged, then you should be able to use it without any problems.
B-rock -
I've just got iPod nano and I don't hear a sound. I've changed deferent earphone, but nothing works. What could be the problem?
Hi there Jasmine1243,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
-Griff W. -
Hi Sir,
I have purchased ipod nano in February month 2011.
I am facing Charging problem in ipod nano. My ipod is getting heated and Charging is not going on. It looks all other function are working fine.
I had some problem in ipod So it was in recovery mode. I have used restore option from iTunes . After that i am facing this issue.
Is there any issue in restore software?
Regards and Thanks,
AnilYou are still under warranty. Just take the iPod to an Apple store or an AASP. Whichever is more convenient for you.
-
Interesting occurance with 1gb ipod nano and on-the-go playlist creation ..
interesting occurance with 1gb ipod nano and on-the-go playlist creation might be helpful to some.
NOTE: the feedback form isnt up to date for software versions for 1gb ipod nano (newest here is 1.1.1 but i have 1.3.1).
it seems i cannot create on-the-go playlist by holding album OR artist, with my 1gb ipod nano with VERSION 1.3.1 software, if there are various sizes of playlists in my ipod. i had about 4 playlists with 1 song in them and 2 -3 playlists with 5 - 30 songs in them. total space on ipod used was about 400mb of 896mb and about 1500 songs (most poor quality to save space (18-48kbs - i noticed some of the lower qualities have overtones of whistle or cricket like sounds (i have many ambient songs birds, thunder storms, etc)).
i just manually deleted ALL playlists also deleted 945 songs on my ipod with itunes, and now i am able to do it. i can even do it now with composer or genre etc (which isnt listed in the playlist creation instructions). i now have 612 songs with 113mb free.
p.s. i tried to leave this as bug feedback but got a strange message that was like a command pointing to a thank you for leaving feedback page.I have got this problem with my new 8gb nano too. Its very sad I had my mini stolen from my person whilst in a hospital bed dozing and it worked from the same itunes list and I could add albums or artists or songs now on the new replacment nano I can only add songs. Very annoying, please let me know if anyone can solve this. I too have reset and restored it numerous times. I am in the uk I think you are in the states.
Windows xp Windows XP
Maybe you are looking for
-
Windows 7 64 bit / HPE-010be Computer does not start up out of 'stand-by' mode
I had this problem several times since I bought this system last month. I leave the PC normally in stand-by and then wake my system up by pushing a key on the keyboard. In the case of the problem, I push a key on the keyboard, the system starts and I
-
User Exit/BADI for Purchase Order and Purchase Requisitions
HI, I have a requireent where i have to check the the user does not enter both Subitems and Over a Limit for a Service Purchase Requisition. Is there a User Exit or Badi that i can use where this information is availaible. also i have to check that r
-
Premiere 6.5 jumpy timeline
I've been using Premiere 6.5 in combination with a Matrox RT2000 for the longest time. But I replaced the Matrox with a Canopus ADVC110 just recently. Now, when I capture into Premiere, it looks like I'm just capturing I-frames. With the Matrox card
-
I need help moving my Photoshop 7 from my old laptop to my new laptop which is running Windows 7 Enterprise. I've tried two routes unsuccessfully. I install the CD, it does not autoplay. I execute Autoplay.exe at the root directory, I am welcomed, I
-
AP has been crashing and has been "Not Responding"
I can't believe this! Ever since I chose to do the most recent update (2.1.3?), AP has been crashing and has been "Not Responding" and I almost Force Quit before it before it came back to life. First I imported from an existing folder (using referenc