Problems w/ Project Manager
Hello everyone,
I'm working with adobe project manager and I'm running into a few issues. The purpose of using this at the local TV station where I work is to manage media and archive after a project's completion while still being able to go back in the future and have 30 frames of adjustments on the clips we used.
We recently upgraded to CC 2014 and it has not been updated since. 8.1.0 I believe is what we're running. I've attached an image of my settings and another of the issue I'm having.
[URL=http://s1121.photobucket.com/user/nchorneyWMUR/media/premiereproblems_zps51ec0b47.png.html ][IMG]<a href='http://i1121.photobucket.com/albums/l518/nchorneyWMUR/premiereproblems_zps51ec0b47.png[/IM G][/URL]'>http://i1121.photobucket.com/albums/l518/nchorneyWMUR/premiereproblems_zps51ec0b47.png[/IM G][/URL]</a>
When I use the project manager to consolidate the project I am running into an issue with my keyable objects. As seen below that text element ceases to be keyable and becomes a large black box as it adobe has converted the keyable .mov file into file that has lost its key.
[URL=http://s1121.photobucket.com/user/nchorneyWMUR/media/projectmanagerissues_zpsd730bc64.jpg. html][IMG]<a href='http://i1121.photobucket.com/albums/l518/nchorneyWMUR/projectmanagerissues_zpsd730bc64.jpg [/IMG][/URL]'>http://i1121.photobucket.com/albums/l518/nchorneyWMUR/projectmanagerissues_zpsd730bc64.jpg [/IMG][/URL]</a>
Can anyone please help point me in the right direction? I'd really like to be able to properly archive our projects and manage our media efficiently.
Thanks!
Here's a shot of my timeline:
http://i1121.photobucket.com/albums/l518/nchorneyWMUR/timelineshot_zps165fcc2b.jpg
Unfortunately I didn't do the project so I'm not 100% sure. Its the first shot that will not carry over after using project manager.
Here is the clip in question in my bin as highlighted:
http://i1121.photobucket.com/albums/l518/nchorneyWMUR/bin_zps6c2fa66d.png
Is this something minor I should be changing? When I linked the clip in question with the other clip labelled as multicam and created a multicamera source sequence that initial clip in the new project was still grayed out like this:
http://i1121.photobucket.com/albums/l518/nchorneyWMUR/grayedtimeline_zps2380beab.png
Here it is in my bin with the sequence and the clip highlighted.
http://i1121.photobucket.com/albums/l518/nchorneyWMUR/binaftermanagement_zps6f9cf8cf.png
Thanks again for all the help! You've been great so far.
Similar Messages
-
PP3.0 --Problem Project Manager Trim Software Damages Files
I have a problem that occurs when a Premiere Pro 3.0 project is trimmed using the project manager software.
It occurs mostly with non-captured files- with wav files such as narration, music, and sfx (they can be Cd 44.1 files and mono and stereo tracks). Sometimes, it happens with graphics files. This problem occurs about half the time the project manger software is used.
In an affected project, there may be any where from 2 to 25 damaged files. The error message that we get in the trimmed project is “unsupported file formats”.
When we open the non-importable audio files in another application like Sound Forge, they are identified as Raw PCM files. These Raw PCM files frequently have errors-- like random noises. The ones that don’t have errors can be saved as a wav file and then it can be re-linked and used.
It is happening on more than one computer. These computers all have dual 32 bit Xeon processors and at least 3 Gigs of memory.Could you give me a little more details about using a file manager?
I usually think of a file manager as selecting some files to keep and some file to delete. I don't think that this will work. Many of the files use only a small portion of the larger file. Are you suggesting to keep the larger files even though they may be less thn 5% of the total size? -
Hello
I've a problem with my project manager and I can't find a clear answer.
Each time that I try to save a trim copy of my project an error pops up. "verify disk space and administrator privileges". (sorry translated from French)
The original post its in the French Adobe forum and they don't know why. They advise me to come to the English forum.
http://forums.adobe.com/message/6097053#6097053
My premiere pro version is premiere pro cs6 (version 6.0.5)
I'm the administrator.
The file was recorded with a black magic Hyperdeck Studio Pro
All the programs are legit and originals.
Thank you all for your answersThe problem is that video files are big (100Gb/hour). Once I edit and cut with Premiere pro I want to save the trimmed project on a drive to use later on for a Satellite TV station and Internet TV stations.
The problem I encounter is always the same ... A problem .... blah blah blah ... verify that you have enough free space and you have administrator privileges... (form the French)
As you can see for this particular project it is 75Gb long I want to save 28Gb and I have more than 300Gb free...
It's very annoying because project managing is one of the features that adobe is bragging about.
Please help
Thanks -
Project manager - problem exporting a project with AE compositions.
I have a problem exporting my project to another disk, this is what happens:
I needed to move the project from the windows partition of my Mac to the Mac partition, in order to be able to continue my edit under MacOS, my sequences include a series of After Effects compositions of footage that has been stabilized in warp stabilizer using the option "replace with AE composition" from the timeline.
Using the project manager I started my backup operation, with these options:
Source: all sequences selected
Resulting Project: Collect files and copy to new location
Include Audio conform files
Destination: a folder in the Mac partition
The resulting project had a message popping up saying that AE rpject file is missing (it was, I had to manually copy and paste it from ithe win partition to the mac) and once copied obviously AE couldn't find the source video clips of its compositions, so I had to manually re-link them all (quite difficult job to do among almost two years of footage).
What have I done wrong ?
Why AE lose the connection with the fils?
ThanksThanks Jim,
I understand that Adobe Anywhere solves this, but there should be this fairly basic functionality (which exists in Avid and FCP) in a non-enterprise edition of the software. I have submitted a couple different feature requests about this, going back to CS5, so hopefully enough people make similar requests for a fix to be implemented. Adobe Anywhere is really not a solution for our small shop as currently configured/priced, especially when we can have editors working remotely with very affordable USB 3 drives. The only hangup is the markers, which just isn't worth a 5 figure fix. As such it's hard to consider the problem solved for either us or any small shop or post crew.
Best,
Jon -
Project Manager and Reverse problems.
Hey there,
I am working on a timeline and when I media manage it I am getting the zebra stripes for some clips that reversed speed. The clip will be freeze framed for a while depending on length. I don't believe it's for every one, but we have had issues with this for multiple projects.
Info:
1080P ProRes 422 timeline.
All footage transcoded to 422.
I don't think it happens on clips which are nested.
I believe it's only reversed clips.
At this point I'm pursuing workarounds, and will post them if I find them, but can someone explain why this is coming up?
Edit on,
-AKChannelHey you know what that might be the case. Our current solution is just to bake the file through AME, as I'm not sure if render and replace would bake in the speed change. I just spoke to a coworker of mine and she had a couple of clips do the same when using project manager.
For the record, here is a couple more notes which may help.
We used to get the same danger stripes issue when media managing Atomos Samurai footage. Transcoded clips through AME worked fine, but interviews done on Samurai footage which was not-transcoded would pick the wrong in-out points for trimming a project through project manager.
Also, the clips I'm using may or may not be transcoded through AME. In my coworkers instance, she was using 7Q footage 4k-HD ProRes (transcoded in the recorder). In my case it was a 240fps 2kRAW clip which was transcoded to Pro Res via Resolve.
I hope that helps and doesn't make things more confusing.
I'm going to mark this question as answered for now, but will try to contact this forum again if something else comes up. -
P6 Project Management Schedule Connection Problem
http://img14.imageshack.us/img14/9397/primaveraru.jpg
When i am creating a new project and i need it to be attached to a Schedule in P6 Project Management no projects come out. Can someone help me. Thanks.Hi,
try to include security details in ur soap header,it will solve your issue -
Adding a New Folder in Project Manager Crashes RH
For the past few days, I have been having problems creating
new folders in RH 7, Project Manager. Sometimes, it works just
fine, and I can add folders, drag topics into them, import into
them, create new topics, whatever.
But then sometimes, the project manager just goes to white
and flashes at me for a while, then RH crashes. The only things I
can see in the PM pane are the triangular colored icons that
overlay folders / topic icons when they include conditional build
tags. No topic names, no folder names, just a column of these
triangles.
When I come back into RH after the crash, most times there
are topics to reimport and / or relocate. I have rebuilt the cpd
file several times. Each time it seems to resolve the issue, but
eventually another crash comes along as I try to add a folder.
For the record, just updated to the new 7.02.001 a few
minutes ago, but RH just crashed again. 3GB RAM, more than 40GB
space available on hard drive. Nothing new on my PC that I can
think of.
Anyone else seeing this?I'm just wondering if anyone has found a cause or solution of this issue?
I'm experiencing it too with one of my projects (currently, I'm on RH8.02.202 on Win7/64, but I've also experienced it in RH7 on WinXP/32, FWIW).
Some other details:
My project is on my C:\ drive.
The folder names are all comprised solely of alphanumerics and underscores.
I've deleted both the PSS and CPD files without any noticeable positive effect.
Since I've been on RH8, the project is set to rebuild the .cpd cache upon opening, but I've also tried deleting it (this might be redundant, but I figured the RH "rebuild" might be different from generating a brand new one).
After I force RH to close, the folder is there when I reopen the project, and the folder behaves normally.
The project resides in the standard "My RoboHelp Projects" folder.
The problem seems to be isolated to this project, which is my largest (~2065 topics in ~85 folders)
I'm at the point where I just automatically force RH to close after I create a folder rather than waiting to for the application to become "officially" non-responsive.
Are there any other files I might try deleting or examining? I've poked around in the .xpj, .fpj, and .hhp files, but I don't see anything odd. I compared my old .pss with the new one RH created, and they were identical.
Thanks!
Dave -
Can't open project after rebuilding Folders in Project Manager
I had a corrupted project so I renamed the cpd file. A lot of Folders in Project Manager were lost, so I recreated the folders and imported all the topics back in. I added one last Folder back in and RH was having a problem with it (I didn't write down the error message). It booted me out. Subsequent attempts to reopen this Project are unfruitful. The message I get is that a certain folder (not the same one I was adding) will be added back in and needs to be properly deleted from Project Manager. (I had renamed that Folder, but I did it inside of Project Manager.)
Thoughts?
Thanks.Please see the announcement at http://forums.adobe.com/community/robohelp/robohelp_html
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge -
Unable to Open Project Site Access Denied Issue (Project Manager)
Hi
We got an issue that one project manager is having 12 projects, in that she can able to view 5 projects-- project sites but remaining 7 projects --- she is not able to open the project site (access denied) error is throwing when she try to open.
She is the project manager of the 12 projects and having project manager permissions on the project sites.
Please suggest any solution for this.
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.I believe I've found the fix for this issue. After opening a ticket with MS support and not getting anywhere with this issue I decided to do an in-depth review of all the Project and SharePoint 2013 CU's starting with December 2013 to September 2014.
To my amazement buried inside the July 2014 CU was a hotfix for this issue described almost word for word. (I will list all the relevant KB's at the end) I contacted my support engineer inquiring about this hotfix and he stated it wasn't relevant because
the "Synchronize Project Web App permissions to Project Site" was not failing or even generating any warnings in our Prod or Test environments. I stated that is not always an indicator as ULS doesn't always catch all relevant errors.
I informed him that I also found a second hotfix pertaining to the same issue released August 2014, apparently the first hotfix in July didn't totally resolve the issue and a second hotfix was released. He was adamant that this would not resolve
our issue and he requested or production databases because he was unable to replicate the issue in his test environment. The reason, you may wonder, is because he was at a higher patch level that our farm.... Obviously! His farm had the most current
CU which included the hotfixes from July and August. Apparently he didn't see the flaw in his logic.
I decided to install the September CU on our test farm. Low and behold that fixed the problem, even though MS support stated the hotfix was not relevant to our issue. I learned a long time ago to take MS support comments as suggestions instead
of gospel truth, this isn't the first time they have confidently given me erroneous information.
We are currently doing further testing to verify that this CU didn't break something else. Unfortunately these rollups are not GA and Microsoft is very clear that you should only install them if the hotfixes pertain directly to your issue.
Finding the hotfixes was a chore as Microsoft loves to create multiple KB's for the same thing and then nest (bury) them so you have to dig through four or five KB's to find the relevant fix. I'll save you the trouble and list them below.
Watch the
September CU Webcast Brian Smith and team go into depth explaining why this issue has been happening and how they fixed it.
September 2014 CU http://support.microsoft.com/kb/2882990 (the one I installed)
August 2014 CU https://support.microsoft.com/kb/2989078
August Project site sync hotfix
https://support2.microsoft.com/kb/2883083
July 2014 CU http://support.microsoft.com/kb/2882990
July Project Site Sync hotfix http://support2.microsoft.com/kb/2882995
Microsoft Project Server Blog
http://blogs.technet.com/b/projectsupport/ (I find this to be more helpful than the TechNet site)
Frank Miranda Florida Hospital MIS -
Unable to open Project management reports
Hi,
I tried to access Reports under Project management, I can see some list of reports but whenever i click any report i get this message " Do you want to save this file or find a program online to open it , Name : BExab6f08f3 , type : unknown , from: xxxxxx " . I get this whenever i try to access any reports in project management.
I had checked few things from my side, /BCV/Main is activated, I have BCV_admin role and also CPR_BCV_USER role, but still i am not able to view a single report. I tried accessing from NWBC desktop GUI and web gui, same error. Please guide me in solving this problem.Hi,
I just have some clarifications, is it necessary to have BI system to access the Reports under Project management / portfolio management?, Or can it be accessed without any BI system?. I found that whenever I run any report under Reports section it tries to execute the RFC SAP_BW, but in my system there is no data available in that RFC, since we dont have BI.please let me know about this. -
Images are missing in Project Manager
I’m replacing old images with new ones in RoboHelp HTML 10.
I’ve deleted the old pictures in Design view and pasted the new pictures in. (I know this is not the recommended way but with lake of time I found it to be the fastest way and we don’t feel the need to give the files described names at the moment.)
It has worked fine until now when I noticed that some images are not showing in Project Manager. I see the “folder” Images and I see a lot off images there but some are missing. The “missing” images are shown in Design view and in the browser after publishing. But in the report Unused files the “missing” images are listed as unused.
I have tried to
close and reopen the project,
generate and publish the project,
delete an “missing” image from Design view and insert it by using Insert / Image. After saving this image, and some other “missing” images, are shown in Project Manager. But not all “missing” images.
Does anyone know why this is, or more important how to get Project Manager to show all images that are used in the project (without having to go through all 154 images trying to figure out which are used but “missing”)?
Some more facts:
They are all gif-images.
They are all stored at the top-level in the project folder. (Are there a limit how many images there can be in the top-level folder? Should I create a separate folder and move the pictures there?)
HTML-code for one “missing” image:
<img src="image7.gif" alt="" style="border: none;"
border="0" />
Grateful for any input!I would have said "Try renaming the folder containing the images in Rh's Project Manager. That sometimes fixes the problem. You can revert to the old name afterwards."
Keeping all the images, and / or topics, in the root is never a good idea. It can slow things down and it's messy.
You can move the images you can see but obviously you cannot move the others. Try moving a topic that has one of the images to a different folder and see if that refreshes. Also try deleting the CPD file and reopening Rh.
Backup first.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Images no longer showing in Project Manager panel, but in project RH8
In a project with 2400 topics and 3400 images we decided to move the images to a project_images folder so we could just remove the html folders in Production when we update. Drag & drop images from previous location to new folder...forever! All was good...Then we shut the project and opened it back up again and only 6 images now display in the Images/project_images folder. In Windows Explorer all 3400 are there. If you go to a topic in RH the images display - with the right paths. They are picked up appropriately when you compile.
They just don't display in the Project Manager panel...making it very difficult to drag them into topics!
We have tried:
1. Deleting the .fpj file in the project_images folder and adding a new image hoping it would rebuild itself
2. Tried renaming the project_images folder to something else - RH HATES that and just hangs. I gave it overnight to figure it out...it never unhung.
3. Tried creating a new folder - again RH hangs and must be manually ended
4. Moved a topic with images to another location - topic moves fine. Images move...but do not show up under Images
5. Imported a topic with images - the new images show fine...the old ones still are invisible.
This is two days of work moving the images...we hate to start over and have no idea if it will do it again. We did this on another project - same problem - but moving a folder resolved it. That is not working here.
Any and all suggestions are greatly appreciated!!!!! RH 8.02.208Wow, what a hassle. I never saw this issue until we upgraded to RH9 and tried to use the resource manager to link images. I've never been as frustrated with RoboHelp as I am now after fifteen years of using it.
We've always had an "images" folder within the root of our projects. We never saw this "image disappearing" problem until now. After pulling my hair out for a couple of days, I think I have nailed down why this is happening (aside from the .cpd clearing).
Envision a project structured like so:
Root Folder
|---Folder A
|---Folder B
|---Images Folder
|---Folder C
|---Folder D
If I drag/drop a new image from the resource manager into a topic that resides in Folder C or Folder D, the image is placed in the root of the project. Okay, not ideal. Why don't images dragged/dropped out of the resource manager retain the resource manager's folder structure? Another post for another day...
Regardless, I want to move the image to my images folder. If I then drag/drop the image from the root of the project folder into the Images Folder, the rhsharedresource.apj is updated, and the link is retained no problem. All right! This is what I want to see, as I already have too many snippet files doomed to be in the root of the project because they can't be moved and are already causing lag when opening and working in projects. Another post for another day...
As long as the new image is only referenced in topics residing in or beneath the Images Folder in the project's structure, the image will never disappear from
the project manager, even when the.cpd is cleared. This is because the topics referencing the image in the Images Folder are within the Images Folder's folder structure.
If the image added is then added to any folder above the Images Folder in the project's structure -- Folder A or Folder B -- the next time RoboHelp is closed and reopened (if you have clear the .cpd checked in RH Options) the image is gone. BAH! GAH! UGH!
Remove the reference to the image from the topics in Folder A or Folder B and the image reappears in the Images Folder the next time RH is opened. Wow, magical!
So, if you never move an image from the Root Folder of the project, you will never see the image disappear from the project manager because it is at the highest level possible and every folder within the project will be beneath the image in the folder structure.
Sure, if the image disappears, you can rename the folder, add a topic, etc. the project manager refreshes and all of the images magically reappear. But, as soon as you close RoboHelp and clear that .cpd, they're gone again.
That's what I've found. Too bad we personally can't restructure the projects we're working on because of a dim-wit Dev call forced on us to use static URLs instead of map IDs to call the topics.
Anyway, I am thinking a project structured like this is now the way to go:
Root Folder
|---Images (aka Resources) Folder
|---Topics Folder A
|---Topics Folder B -
Problem in project system report ZPS_PROJSUMMARY
i am working with a report ZPS_PROJSUMMARY which extracts all project summary report.now problem is it is extracting las financila years (2006 ) closed WBS element also with this years WBS elements. this problem happening in production only. this is not coming in pre production.in pre production it is deleting all the previous years WBS using this subroutine perform process_delete_child using it_report-pspnr which is based on condition if l_status_fyear lt s_fyear-low.
i am giving the full code below:-
report zps_projsummary line-size 623
line-count 65
no standard page heading
message-id zfiwip.
Report Name: ZPS_PROJSUMMARY
Author: Rey Salvador (for NDC)
Date: 14.09.2001
Purpose: Project Summary Report (with Commitments)
Modifications Log
Mod Id Author Date References Purpose
M001 R.Salvador 19.10.01 THOR 2845 Add YTD Rev.Recognised
M002 R.Salvador 19.11.01 THOR 2978 Fix YTD Rev.Rec. Level 1
M003 R.Salvador 19.11.01 THOR 3050 Fix YTD Rev.Rec. Level 1
M004 R.Salvador 08.03.02 THOR 3222 Fix Include Closed WBS
M005 R.Salvador 17.05.02 THOR 3342 Fix issue with Profile
M006 C.Kontkanen 22.05.02 LOB Add ProjManager sel
M007 R.Salvador 19.06.02 LOB Incl. WIP/COGS Adjustments
M008 R.Salvador 26.07.02 THOR xxxx Add ProjOfficer
M009 R.Salvador 06.08.02 THOR 3508 Revenue Recognition Changes
M010 R.Salvador 29.11.02 THOR 3704 New Billing Reports
M011 R.Salvador 17.12.02 THOR 3646 Fix problem with statuses
M012 R.Salvador 20.01.03 THOR 3930 Add CP/SP/WO number
M013 R.Salvador 07.03.03 THOR 3953 Incorrect Status
M014 R.Salvador 15.04.03 THOR 4056 Fix Level 1 Calculation
M015 R.Salvador 01.05.03 THOR 4070 Fix Level 1 Calculation
M016 R.Salvador 17.06.03 THOR 4125 Fix Level 2 Calculation
M017 R.Salvador 03.09.03 THOR 4220 Change RevRec Calculation
M018 R.Salvador 25.09.03 THOR 4237 Fix WBS Selection
M019 R.Salvador 11.11.03 THOR 4297 Add SP number
M020 R.Salvador 16.01.04 THOR 4342 Fix Revenue Recognition
M021 R.Salvador 28.01.04 THOR 4344 Fix Revenue Recognition
M022 R.Salvador 11.02.04 THOR 4340 Fix Selection Criteria
Ta Tran 10.06.04 DI4K900626 Copied from NDC
M023 Maccha 29.08.05 DI2K921397 Honing the selection
Srinivas process for Director and
Manager criteria.
M024 M.Srinivas 20.09.05 DI2K921599 Rectifying the order level
- Partner profile
selections. Ref.
docket:203680869
M025 M.Srinivas 01.05.06 DI2K922837 Order level - Status
profile selections
rectification. PD:203960491
M026 Gaurav Dixit18.09.06 DI2K923361 Not to select the deleted
partners from IHPA table.
M027 SaiKiran Reddy07.06.07 DI2K923793 To Exclude Deleted partner
from IHPA table.
include zps_projsummcomd.
types: begin of ty_wbs_report2, "Reporting Table
Pdir(20), "Prog Dir
posid like prps-posid, "WBS Element
post1 like prps-post1, "Short Text
fkstl like prps-fkstl, "resp const centre
prart like prps-prart, "Proj Type
ZZORDERLEVEL(2), "order level
ZZACTTYP(6), "Activity type
sstatus like bsvx-sttxt, "system status
ustatus like bsvx-sttxt, "user status
ZZIMCINITIATIVE(24), "IMC initiative
ZZIMCPROGRAM(02), "IMC Program
ZZWORKCATEGORY(02), "Work Cat
ZZWPMANLOB(01), "LOB
ZZSOURCE(02), "Source
ZZPRIN(02), "Principal
ZZIMPLEMENTREG(01), "IMP Reg
ZZCONTRACTID(10), "Contract
ZZWPNUM(08), "WP No
ZZsPNUM(08), "SP No
ZZORDERNUM(04), "Order No
lead(20), "Prog Lead
Pmgr(20), "Prog Mgr
Poff(20), "Prog Officer
acthours type megxxx, "megXXX: 3decimal"Actual Hours
acthours type wkgxxx, "wkgXXX: 2decimal"Actual Hours
planhours type wkgxxx, "Planned Hours
PLANLABOUR type wkgxxx, "PLAN LABOUR
ACTLABOUR type wkgxxx, "ACTUAL LABOUR
planmatcosts type wkgxxx, "plan material costs
actmatcosts type wkgxxx, "actual material costs
plancosts type wkgxxx, "Planned COsts
actcosts type wkgxxx, "Actual Costs
prcommitment type wkgxxx, "PR Commitment
pocommitment type wkgxxx, "PO Commitment
totcommitment type wkgxxx, "Total Commitment
zzwip like prps-zzwip, "rev rec process
planrev type wkgxxx, "Planned Revenues
actrev type wkgxxx, "Actual Revenues
pcnt_comp(8) type p decimals 2, "% complete
acttotrevrec type wkgxxx, "Act.Rev.Rec m009
actytdrevrec type wkgxxx, "Act.Rev Rec m009
revrec type wkgxxx, "revenue Recognise
revrecytd type wkgxxx, "RevRec YTD M001
rev_collected like vbrp-netwr, "Collected Rev
end of ty_wbs_report2.
types: begin of ty_wbs_report, "Reporting Table
Pdir(20), "Prog Dir
posid like prps-posid, "WBS Element
post1 like prps-post1, "Short Text
fkstl like prps-fkstl, "resp const centre
prart like prps-prart, "Proj Type
ZZORDERLEVEL(2),
ZZACTTYP(6), "Activity type
sstatus like bsvx-sttxt, "system status
ustatus like bsvx-sttxt, "user status
ZZIMCINITIATIVE(24), "IMC initiative
ZZIMCPROGRAM(02), "IMC Program
ZZWORKCATEGORY(02), "Work Cat
ZZWPMANLOB(01), "LOB
ZZSOURCE(02), "Source
ZZPRIN(02), "Principal
ZZIMPLEMENTREG(01), "IMP Reg
ZZCONTRACTID(10), "Contract
ZZWPNUM(08), "WP No
ZZSPNUM(08), "SP No
ZZORDERNUM(04), "Order No
lead(20), "Prog Lead
Pmgr(20), "Prog Mgr
poff(20), "Prog Officer
acthours type wkgxxx, "Actual Hours
planhours type wkgxxx, "Planned Hours
PLANLABOUR type wkgxxx, "PLAN LABOUR
ACTLABOUR type wkgxxx, "ACTUAL LABOUR
planmatcosts type wkgxxx, "plan material costs
actmatcosts type wkgxxx, "actual material costs
plancosts type wkgxxx, "Planned COsts
actcosts type wkgxxx, "Actual Costs
prcommitment type wkgxxx, "PR Commitment
pocommitment type wkgxxx, "PO Commitment
totcommitment type wkgxxx, "Total Commitment
zzwip like prps-zzwip, "rev rec process
planrev type wkgxxx, "Planned Revenues
actrev type wkgxxx, "Actual Revenues
pcnt_comp(8) type p decimals 2, "% complete
acttotrevrec type wkgxxx, "Act.Rev.Rec m009
actytdrevrec type wkgxxx, "Act.Rev Rec m009
revrec type wkgxxx, "revenue Recognise
revrecytd type wkgxxx, "RevRec YTD M001
pspnr like prps-pspnr, "WBS Internal Key
postu like prps-postu, "Short Text
fakkz like prps-fakkz,
psphi like prps-psphi, "proj def
zzcust like prps-zzcustNUM, "Customer
zzcustnum like prps-zzcustnum, "Customer
kostl like prps-kostl, "Cost Centres
prsumm(1) type c, "Project Summary
actcostscfy type wkgxxx, "Current FY Costs
actrevcfy type wkgxxx, "Current FY Rev
rev_billed like vbrp-netwr, "Billed Revenue
gst_billed like vbrp-mwsbp, "Billed GST
rev_collected like vbrp-netwr, "Collected Rev
gst_collected like vbrp-mwsbp, "Collected GST
totbudget type wkgxxx, "Total Budget
verna like prps-verna, "PM m006
astna like prps-astna, "PO m006
totcogs type wkgxxx, "Total COGS m009
ytdcogs type wkgxxx, "YTD COGS m009
end of ty_wbs_report.
types: begin of ty_totals, "Structure for Sub-totals
actmatcosts type wkgxxx, "Actual material Costs
actcosts type wkgxxx, "Actual Costs Total
actrev type wkgxxx, "Actual Revenues Total
planmatcosts type wkgxxx, "plan material Costs
plancosts type wkgxxx, "Planned Costs
planrev type wkgxxx, "Planned Revenues
acthours type wkgxxx, "Actual Hours
planhours type wkgxxx, "Planned Hours
ACTLABOUR type wkgxxx, "ACTUAL LABOUR
PLANLABOUR type wkgxxx, "Planned LABOUR
revrec type wkgxxx, "Revenue Recognised
revrecytd type wkgxxx, "RevRec YTD M001
acttotrevrec type wkgxxx, "RevRec Actual M009
profit type wkgxxx, "Planned Profit/Loss
actcostscfy type wkgxxx, "Actual Costs Current FY
actrevcfy type wkgxxx, "Actual Revenues Current FY
rev_billed type wkgxxx, "Billed Revenue
gst_billed type wkgxxx, "Billed GST
rev_collected type wkgxxx, "Collected Rev
gst_collected type wkgxxx, "Collected GST
prcommitment type wkgxxx, "PR Commitment
pocommitment type wkgxxx, "PO Commitment
totcommitment type wkgxxx, "Total Commitment
totbudget type wkgxxx, "Total Budget
actytdrevrec TYPE wkgxxx,
end of ty_totals.
type-pools: gsetc.
tables: cepct.
data: it_wbs_report TYPE ty_wbs_report OCCURS 0 WITH HEADER LINE,
it_wbs_report2 TYPE ty_wbs_report2 OCCURS 0 WITH HEADER LINE,
wr_wbs_report type ty_wbs_report,
it_prctr type standard table of setlist,
it_stat(72) occurs 0 with header line,
et_stat(72) occurs 0 with header line,
begin of it_tj49 occurs 0,
stats like tj49-stats,
incex like tj49-incex,
verkz like tj49-verkz,
end of it_tj49,
begin of it_csla occurs 150,
vksta like csla-vksta,
end of it_csla,
w_stat_flg,
w_join(3),
w_not(3),
w_stat_val(7) value ''' ''',
W_LEAD(40),
W_PDIR(40),
W_PMGR(40),
w_poff(40),
w_tab like sy-tabix,
n like sy-index,
w_reporting_level(2) type c,
w_gtotal_text(500) type c,
w_other_level(1) type c,
w_budat like bkpf-budat, "m002
w_level like prps-stufe,
w_record_count(8) type n,
w_pspid_ind(1) type c, "m003
begin of ziheader,
w_strlen type i,
hdr_pos type p,
hold_name(30),
conf_txt(54) value
'* CONFIDENTIAL - PROPERTY OF BACCHUS *',
end of ziheader,
p_budat like bkpf-budat,
w_sel_posid like prps-posid,
Internal tables to hold set hierarchy, values, pointers and sorts
set_hierarchy like sethier occurs 0 with header line,
set_values like setvalues occurs 0 with header line,
set_id like rgsbs-setnr,
set_id2 like rgsbs-setnr,
w_setnr(30) type c,
w_set_values like rgsb4 occurs 0 with header line,
lt_objlst type standard table of onr00,
lr_objlst type onr00,
w_first type c.
Start of M011
data: it_wbs1 like it_wbs occurs 0.
data: it_wbs_tmpo like it_wbs occurs 0 with header line. "M024
data: begin of loc_wbs occurs 0.
include structure zco_wip_wbslst. "test '''
data: pdir(20),
zzacttyp(6),
ZZIMCINITIATIVE(24),
ZZIMCPROGRAM(02),
ZZWORKCATEGORY(02),
ZZWPMANLOB(01),
ZZSOURCE(02),
ZZPRIN(02),
ZZIMPLEMENTREG(01),
ZZCONTRACTID(10),
ZZWPNUM(08),
ZZSPNUM(08),
ZZORDERNUM(04),
PERNR(08),
PERNR2(08),
end of loc_wbs.
data: begin of it_report occurs 0,
posid like prps-posid,
pspnr like prps-pspnr,
end of it_report.
End of M011
data: begin of it_deleted occurs 0,
posid like prps-posid,
pspnr like prps-pspnr,
end of it_deleted.
data: begin of l_deleted occurs 0,
posid like prps-posid,
pspnr like prps-pspnr,
end of l_deleted.
data: w_year like bkpf-gjahr.
data: begin of t_date occurs 0,
w_budat like bkpf-budat,
poper like t_poper-poper,
end of t_date.
data: t_ihpa like ihpa occurs 0 with header line,
t_ihpa1 like ihpa occurs 0 with header line,
t_ihpa2 like ihpa occurs 0 with header line,
t_ihpa3 like ihpa occurs 0 with header line,
t_ihpa4 like ihpa occurs 0 with header line,
l_status(3),
w_PLANHOURS like it_wbs-PLANHOURS,
w_PLANREV like it_wbs-PLANREV,
w_PLANCOSTS like it_wbs-PLANCOSTS,
it_tmp_wbs3 type zco_proj_summary_v2 occurs 0 with header line,
W_it_wbs5 like it_wbs .
ranges: r_prctr for prps-prctr.
ranges: r_stufe for prps-stufe.
ranges: r_posid for prps-posid.
constants: c_crtd like tj49-stats value 'I0001'.
CONSTANTS: C_LEAD(2) VALUE '4A',
C_PDIR(2) VALUE '4B',
C_PMGR(2) VALUE 'A1',
C_Poff(2) VALUE 'A2',
c_pdn like ihpa-OBTYP value 'PDN',
c_prn like ihpa-OBTYP value 'PRN'. "M023
tables : pa0002.
---------------------Organisational Units------------------------*
selection-screen begin of block orgunit with frame title text-t06.
*WP/CP Managing LOB
select-options: S_ZWP for PRPS-ZZWPMANLOB MATCHCODE OBJECT ZZWPMANLOB.
*Implementing Region
select-options: S_ZIMP for PRPS-ZZIMPLEMENTREG MATCHCODE OBJECT
ZZIMPLEMENTREG.
*Cost center group
PARAMETERS: P_CTGRP LIKE RKSB1-KSGRU no-display.
*Responsible Cost Center
select-options: s_fkstl for prps-fkstl.
select-options: s_src for proj-zzsource MATCHCODE OBJECT ZzSOURCE.
select-options: s_prin for proj-zzprin MATCHCODE OBJECT ZzPRINCIPAL .
select-options: s_wcat for proj-zzworkcategory MATCHCODE OBJECT
ZZWORKCATEGORY.
select-options: s_wpcpt for proj-ZZTYPE MATCHCODE OBJECT ZzTYPE.
selection-screen end of block orgunit.
selection-screen begin of block periods with frame title text-t05.
selection-screen begin of line.
selection-screen comment 1(20) text-c04 for field p_kokrs.
selection-screen position pos_low.
parameters: p_kokrs type kokrs obligatory default 'TELC'.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text-c01 for field s_fyear.
selection-screen position pos_low.
select-options: s_fyear for bkpf-gjahr obligatory no intervals
no-extension.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text-c02 for field s_poper.
selection-screen position pos_low.
select-options: s_poper for T009B-poper obligatory no intervals
no-extension.
selection-screen end of line.
selection-screen begin of line.
selection-screen position pos_low.
selection-screen end of line.
data: p_incwip(1) type c value ' '.
selection-screen begin of line.
selection-screen comment 1(30) text-c25 for field p_calrev.
selection-screen position pos_low.
parameters: p_calrev radiobutton group 0001 default 'X'.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(30) text-c26 for field p_actrev.
selection-screen position pos_low.
parameters: p_actrev radiobutton group 0001.
selection-screen end of line.
End of M007 Mods
selection-screen end of block periods.
selection-screen begin of block psjsel with frame title text-t01.
*Program Leadhouse
select-options: s_plead for pa0002-pernr matchcode object ZPA0002.
*Project Director
select-options: s_pdir for pa0002-pernr matchcode object ZPA0002.
*Project Manager
select-options: s_pmgr for pa0002-pernr matchcode object ZPA0002.
*Project Profile
select-options: s_PROFL FOR PROJ-PROFL default 'EXTERN' obligatory.
*Project Definition
select-options: s_pspid for proj-pspid.
*WBS Element
select-options: s_posid for prps-posid.
selection-screen end of block psjsel.
selection-screen begin of block othersel with frame title text-t07.
parameters: p_lvl1 radiobutton group rplv,
p_lvl2 radiobutton group rplv,
p_wip radiobutton group rplv.
selection-screen begin of line.
selection-screen comment 1(20) text-c16 for field p_oth.
selection-screen position pos_low.
parameters: p_oth radiobutton group rplv.
selection-screen comment 40(20) text-c17 for field p_level.
parameters: p_level like prps-stufe.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(22) text-c22 for field p_incwbs.
selection-screen position 42.
parameters: p_incwbs as checkbox.
selection-screen end of line.
Start of M006 Mods
selection-screen begin of line.
selection-screen comment 1(41) text-c23 for field p_clwbs.
selection-screen position 42.
parameters: p_clwbs as checkbox default 'X'.
selection-screen end of line.
End of M006 Mods
parameters:
p_status like tj49-selid.
select-options:
s_prart for prps-prart.
selection-screen end of block othersel.
selection-screen begin of block outfile with frame title text-t11.
selection-screen begin of line.
selection-screen comment 1(20) text-c11 for field p_file.
selection-screen position pos_low.
parameters: p_file as checkbox.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text-c13 for field p_runid.
selection-screen position pos_low.
parameters: p_runid like zcnwip_log-zrunid.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text-c12 for field p_filenm.
selection-screen position pos_low.
parameters: p_filenm(40) type c default '/batch/int/send/ndcreports/'
lower case.
selection-screen end of line.
selection-screen end of block outfile.
initialization.
perform ini_fiscal_year_current.
Default year/period in the selection screen
s_fyear-sign = 'I'.
s_fyear-option = 'EQ'.
APPEND s_fyear.
s_poper-sign = 'I'.
s_poper-option = 'EQ'.
APPEND s_poper.
perform ini_file_path.
at selection-screen on block outfile.
if not p_file is initial.
if p_filenm is initial.
message e017.
endif.
if p_runid is initial.
message e017.
endif.
endif.
at selection-screen on p_status.
clear it_stat.
refresh it_stat.
if p_status is initial.
w_stat_flg = 'N'.
else.
w_stat_flg = 'Y'.
endif.
at selection-screen.
include ZCNWIPCOMF_V2.
if not p_actrev is initial.
move: w_curr_year to w_curr_fperiod+0(4),
w_curr_period to w_curr_fperiod+4(2),
s_fyear-low to w_sel_fperiod+0(4),
s_poper-low to w_sel_fperiod+4(2).
if w_sel_fperiod le '200212'. "temp
message e025.
endif.
if w_sel_fperiod ge w_curr_fperiod.
message e026.
endif.
endif.
Check if Other level check, specify level from 3-4
if not p_oth is initial and
p_level is initial.
message e021.
endif.
Validate File Information
if not p_file is initial.
if p_runid is initial or
p_filenm is initial.
message e014.
endif.
select count(*) from zcnwip_log
where zrunid eq p_runid
and zrep eq 'PROJCE'. " to be changed
if sy-subrc eq 0.
message w022 with p_runid.
endif.
endif.
if not p_ctgrp is initial and not s_FKSTL is initial.
message e087 with 'Cost Center Group' 'Responsible Cost Center'.
endif.
if not p_ctgrp is initial.
clear w_setnr.
move: '0101' to w_setnr+0(4),
P_KOKRS to w_setnr+4(4),
p_ctgrp to w_setnr+8.
call function 'G_SET_GET_ALL_VALUES'
EXPORTING
setnr = w_setnr
TABLES
set_values = w_set_values
EXCEPTIONS
set_not_found = 1
others = 2.
if sy-subrc eq 0.
loop at w_set_values.
if w_set_values-from = w_set_values-to.
S_FKSTL-low = w_set_values-from.
S_FKSTL-option = 'EQ'.
else.
S_FKSTL-low = w_set_values-from.
S_FKSTL-high = w_set_values-to.
S_FKSTL-option = 'BT'.
endif.
S_FKSTL-sign = 'I'.
append S_FKSTL.
endloop.
else.
message e201 with p_ctgrp.
endif.
endif.
start-of-selection.
data: w_poper like s_poper-low,
w_fyear like s_fyear-low.
w_poper = s_poper-low.
loop at s_poper.
case s_poper-option.
when 'EQ'.
move s_poper-low to t_poper.
append t_poper.
clear t_poper.
when 'BT'.
move s_poper-low to t_poper.
append t_poper.
clear t_poper.
while w_poper < s_poper-high.
w_poper = w_poper + 1.
move w_poper to t_poper.
append t_poper.
clear t_poper.
endwhile.
endcase.
endloop.
w_fyear = s_fyear-low.
loop at s_fyear.
case s_fyear-option.
when 'EQ'.
move s_fyear-low to t_fyear.
append t_fyear.
clear t_fyear.
when 'BT'.
move s_fyear-low to t_fyear.
append t_fyear.
clear t_fyear.
while w_fyear < s_fyear-high.
w_fyear = w_fyear + 1.
move w_fyear to t_fyear-fyear.
append t_fyear.
clear t_fyear.
endwhile.
endcase.
endloop.
sort t_fyear by fyear .
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
EXPORTING
I_DATE = sy-datum
I_PERIV = 'V6'
IMPORTING
E_BUPER =
E_GJAHR = w_fyear.
w_fyear = s_fyear-low.
s_fyear-low = w_fyear.
Reset Indicator
if p_calrev is initial.
move 'X' to p_incwip.
else.
clear p_incwip.
endif.
loop at t_poper.
*get last day in each period of range
t_date-poper = t_poper-poper.
*------ Start of M002 modifications
*------ Determine last day of the posting period
call function 'LAST_DAY_IN_PERIOD_GET'
EXPORTING
i_gjahr = s_fyear-low
i_periv = tka01-lmona
i_poper = t_poper-poper
IMPORTING
e_date = t_date-w_budat.
append t_date.
clear t_date.
endloop.
*get last day of last period in previous fiscal years chosen
*016 = last period
delete t_fyear where fyear = w_fyear. "remove current fyear
loop at t_fyear.
call function 'LAST_DAY_IN_PERIOD_GET'
EXPORTING
i_gjahr = t_fyear-fyear
i_periv = 'V6'
i_poper = '016'
IMPORTING
e_date = t_date-w_budat.
t_date-poper = '016'.
append t_date.
clear t_date.
endloop.
*Get the Proj Def from WBS selct option and refresh wbs select option.
data: begin of l_psphi occurs 0,
POSID like prps-POSID,
pspid like prps-psphi,
end of l_psphi.
data: begin of l_pspid occurs 0,
pspid like proj-pspid,
end of l_pspid.
data: begin of i_proj occurs 0, "M023
pspnr like proj-pspnr, "M023
end of i_proj. "M023
data: begin of i_prps occurs 0, "M023
objnr like prps-objnr, "M023
end of i_prps. "M023
data: begin of i_psphi1 occurs 0, "M023
psphi like prps-psphi, "M023
end of i_psphi1. "M023
data: len_posid type i.
if not s_posid[] is initial.
select posid psphi into table l_psphi
from prps
where posid in s_posid.
if sy-subrc ne 0.
message i100.
exit.
endif.
if not l_psphi[] is initial.
sort l_psphi.
select pspid into table l_pspid
from proj
for all entries in l_psphi
where pspnr = l_psphi-pspid and
profl in s_profl.
if sy-subrc = 0.
delete adjacent duplicates from l_pspid.
loop at l_pspid.
s_pspid-sign = 'I'.
s_pspid-option = 'EQ'.
s_pspid-low = l_pspid-pspid.
append s_pspid.
clear s_pspid.
endloop.
else.
message i100.
exit.
endif.
endif.
clear s_posid.
refresh s_posid.
loop at l_psphi.
s_posid-sign = 'I'.
s_posid-option = 'CP'.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_OUTPUT'
EXPORTING
INPUT = l_psphi-posid
IMPORTING
OUTPUT = l_psphi-posid.
while l_psphi-posid ca '.'.
replace '.' with space into l_psphi-posid.
endwhile.
condense l_psphi-posid no-gaps.
concatenate l_psphi-posid '*' into s_posid-low.
append s_posid.
endloop.
endif.
*------ End of M002 modifications
----- Exclude the P. WBS elements, these are only used for
*----- intermediate postings and are not relevant for WIP, COGS,...
perform ini_posid_range.
perform ini_pspid_range.
if not s_pspid[] is initial.
*----- If projects are selected, then make sure we have the internal
*----- key to PROJ (ie, field PSPNR)
perform get_partners.
perform sos_prepare_proj_range.
if r_psphi[] is initial.
message i100.
exit.
endif.
endif.
*----- WBS ranges with "CP" (Contains Pattern) entries need
*----- to be condensed, because the conversion exit for field POSID
----- causes an entry entered as "P." to be stored as "P *". Hence
*----- selection is flawed.
perform sos_condense_range_wbs.
*----- Activity Type Group is used to determine what Activity Types
*----- to take into account for the computation of planned and actual
*----- hours. The Activity Type Group must be exploded into its
*----- individual Activity Types, so we can build a range of Activity
*----- types.
perform sos_build_act_type_range.
*----- Selection of WBS as per selection criteria, but only Billing WBS
*----- Elements or Level 2 WBS elements
Get Level re-determined
if not p_oth is initial.
case p_level.
when 1.
move c_on to p_lvl1.
clear p_oth.
when 2.
move c_on to p_lvl2.
clear p_oth.
endcase.
endif.
if not p_lvl1 is initial.
w_reporting_level = 'L1'.
w_level = 1.
endif.
if not p_lvl2 is initial.
w_reporting_level = 'L2'.
w_level = 2.
endif.
if not p_wip is initial.
w_reporting_level = 'BE'.
w_level = 0.
endif.
refresh r_stufe.
if not p_lvl1 is initial.
clear: r_stufe.
move: '1' to r_stufe-low,
'2' to r_stufe-high,
'BT' to r_stufe-option,
'I' to r_stufe-sign.
append r_stufe.
elseif not p_oth is initial.
clear: r_stufe.
move: p_level to r_stufe-low,
'EQ' to r_stufe-option,
'I' to r_stufe-sign.
append r_stufe.
elseif not p_wip is initial. "INS DI5K902370
clear: r_stufe. "INS DI5K902370
move: '1' to r_stufe-low, "INS DI5K902370
'99' to r_stufe-HIGH, "INS DI5K902370
'BT' to r_stufe-option, "INS DI5K902370
'I' to r_stufe-sign. "INS DI5K902370
move: '2' to r_stufe-low,
'99' to r_stufe-HIGH,
'BT' to r_stufe-option,
'I' to r_stufe-sign.
append r_stufe. "INS DI5K902370
else.
clear: r_stufe.
move: '2' to r_stufe-low,
'EQ' to r_stufe-option,
'I' to r_stufe-sign.
append r_stufe.
endif.
perform select_wbs_new tables r_psphi.
commit work.
Process any WBS elements missed during initial selection
if not s_posid[] is initial.
perform check_billing_elements.
sort it_wbs by psphi
pspnr.
endif.
delete adjacent duplicates from it_wbs.
append lines of it_wbs to it_wbs1.
sort it_wbs1 by psphi
pspnr.
Transfer to temporary table before calling function
refresh loc_wbs.
loop at it_wbs1 into wr_wbs.
w_tabix = sy-tabix.
if wr_wbs-psphi ne w_ref_psphi.
if not loc_wbs[] is initial.
*----- CAREFUL: THIS FUNCTION MODULE ASSUMES THAT THE WBS ELEMENTS
*----- PASSED INTO TABLE I_WBS ALL BELONG TO THE SAME PROJECT
*----- DEFINITION. FUNCTION MODULE WILL NOT GIVE PROPER RESULTS
*----- IF CALLED FOR A TABLE I_WBS WITH WBS ELEMENTS BELONGING
*----- TO VARIOUS PROJECT DEFINITIONS. BE WARNED!!!
call function 'Z_CN_DETERMINE_REPORTS'
EXPORTING
i_fyear = s_fyear-low
i_prsumm_level = w_level
i_closed = 'X'
TABLES
i_wbs = loc_wbs
i_deleted = l_deleted.
if not p_lvl2 is initial.
loop at loc_wbs where stufe gt 2 and lvl2_posid is initial.
do.
select single up into prhi-up
from prhi
where posnr = loc_wbs-pspnr.
select single * from prps
where pspnr = prhi-up.
if prps-stufe = 2.
loc_wbs-lvl2_pspnr = prps-pspnr.
loc_wbs-lvl2_posid = prps-posid.
exit.
else.
loc_wbs-pspnr = prhi-up.
endif.
enddo.
modify loc_wbs.
endloop.
endif.
perform sos_append_wbs.
refresh l_deleted.
endif.
w_ref_psphi = wr_wbs-psphi.
refresh loc_wbs.
endif.
clear loc_wbs.
move-corresponding wr_wbs to loc_wbs.
append loc_wbs.
endloop.
if not loc_wbs[] is initial.
*----- CAREFUL: THIS FUNCTION MODULE ASSUMES THAT THE WBS ELEMENTS
*----- PASSED INTO TABLE I_WBS ALL BELONG TO THE SAME PROJECT
*----- DEFINITION. FUNCTION MODULE WILL NOT GIVE PROPER RESULTS
*----- IF CALLED FOR A TABLE I_WBS WITH WBS ELEMENTS BELONGING
*----- TO VARIOUS PROJECT DEFINITIONS. BE WARNED!!!
call function 'Z_CN_DETERMINE_REPORTS'
EXPORTING
i_fyear = s_fyear-low
i_prsumm_level = w_level
i_closed = 'X'
TABLES
i_wbs = loc_wbs
i_deleted = l_deleted.
if not p_lvl2 is initial.
loop at loc_wbs where stufe gt 2 and lvl2_posid is initial.
do.
select single up into prhi-up
from prhi
where posnr = loc_wbs-pspnr.
select single * from prps
where pspnr = prhi-up.
if prps-stufe = 2.
loc_wbs-lvl2_pspnr = prps-pspnr.
loc_wbs-lvl2_posid = prps-posid.
exit.
else.
loc_wbs-pspnr = prhi-up.
endif.
enddo.
modify loc_wbs.
endloop.
endif.
perform sos_append_wbs.
refresh loc_wbs.
refresh l_deleted.
endif.
perform process_report_table.
End of M011
Check Status Profile
if not p_status is initial.
perform process_check_status_profile.
sort it_wbs by psphi
pspnr.
endif.
Start of M006 mods
if p_clwbs is initial.
Ignore projects/WBS closed based on the year
perform process_closed_projects.
endif.
End of M006 mods
describe table it_wbs lines w_lines.
if w_lines eq 0.
message i100.
exit.
endif.
sort it_wbs by psphi
pspnr.
loop at it_wbs
into wr_wbs.
w_tabix = sy-tabix.
*----- We will extract costs and determine to which reports a WBS
*----- by Project Hierarchy, ie, we will look at all the WBS Elements
*----- in a given hierarchy in one hit. This simplifies the
*----- process of determining the highest billing element or the
*----- Level 2 WBS element for a selected WBS
*----- It also had the advantage of allowing parallel processing
*----- using CALL FUNCTION STARTING NEW TASK if required in
*----- the future
if wr_wbs-psphi ne w_ref_psphi.
if not it_tmp_wbs[] is initial.
loop at t_date.
it_tmp_wbs2[] = it_tmp_wbs[].
call function 'Z_PS_WIP_GET_COSTS_COMMITMENT'
EXPORTING
i_fyear = s_fyear-low
i_poper = t_date-poper
i_billing = 'X'
i_prsumm_level = w_level
i_other_level = w_other_level
i_budat = t_date-w_budat
i_commitment = 'X'
i_include_wipadj = p_incwip "M007
TABLES
i_rsparams = it_rsparams
i_wbs = it_tmp_wbs2.
loop at it_tmp_wbs2 into it_tmp_wbs3.
collect it_tmp_wbs3.
endloop.
w_tab = sy-tabix.
n = 1.
while n <= w_tab .
read table it_tmp_wbs2 index n.
it_tmp_wbs3 = it_tmp_wbs2.
modify table it_tmp_wbs3
index n
transporting
PLANLABOUR PLANHOURS PLANREV PLANCOSTS stufe.
n = n + 1.
endwhile.
endloop.
it_tmp_wbs[] = it_tmp_wbs2[].
perform sos_process_tmp_table.
endif.
w_ref_psphi = wr_wbs-psphi.
refresh it_tmp_wbs.
endif.
wr_wbs-tabix = w_tabix.
append wr_wbs to it_tmp_wbs.
if w_tabix eq w_lines.
*----- Don't forget to process the last hierarchy!!
if not it_tmp_wbs[] is initial.
loop at t_date.
it_tmp_wbs2[] = it_tmp_wbs[].
call function 'Z_PS_WIP_GET_COSTS_COMMITMENT'
EXPORTING
i_fyear = s_fyear-low
i_poper = t_date-poper
i_billing = 'X'
i_prsumm_level = w_level
i_other_level = w_other_level
i_budat = t_date-w_budat
i_commitment = 'X'
i_include_wipadj = p_incwip "M007
TABLES
i_rsparams = it_rsparams
i_wbs = it_tmp_wbs2.
exceptions
not_found = 1.
loop at it_tmp_wbs2 into it_tmp_wbs3.
collect it_tmp_wbs3.
endloop.
w_tab = sy-tabix.
n = 1.
while n <= w_tab .
read table it_tmp_wbs2 index n.
it_tmp_wbs3 = it_tmp_wbs2.
modify it_tmp_wbs3 index n transporting stufe
PLANLABOUR PLANHOURS PLANREV PLANCOSTS .
n = n + 1.
endwhile.
endloop.
it_tmp_wbs[] = it_tmp_wbs2[].
perform sos_process_tmp_table.
endif.
endif.
endloop.
end-of-selection.
Delete WBS with no financial information
loop at it_wbs_report into wr_wbs_report.
if wr_wbs_report-actcosts eq 0 and
wr_wbs_report-plancosts eq 0 and
wr_wbs_report-planrev eq 0 and
wr_wbs_report-acthours eq 0 and
wr_wbs_report-actrev eq 0 and
wr_wbs_report-revrec eq 0 and
wr_wbs_report-revrecytd eq 0 and
wr_wbs_report-acttotrevrec eq 0 and
wr_wbs_report-actytdrevrec eq 0 and
wr_wbs_report-pocommitment eq 0 and
wr_wbs_report-prcommitment eq 0 and
p_incwbs is initial.
delete it_wbs_report index sy-tabix.
endif.
endloop.
loop at it_wbs_report.
select single
objnr
psphi
zzacttyp
ZZIMCINITIATIVE
ZZIMCPROGRAM
ZZWPMANLOB
ZZIMPLEMENTREG
ZZCONTRACTID
ZZWPNUM
ZZSPNUM
ZZORDERNUM
ZZORDERLEVEL
ZZWIP
from prps
into corresponding fields of w_it_wbs5
where posid eq it_wbs_report-posid.
CLEAR: W_LEAD, W_PDIR, W_PMGR, w_poff.
select single zztype ZZWORKCATEGORY ZZPRIN ZZSOURCE from proj into
(w_it_wbs5-zztype, w_it_wbs5-ZZWORKCATEGORY, w_it_wbs5-ZZPRIN,
w_it_wbs5-ZZSOURCE) where pspnr = w_it_wbs5-psphi.
CLEAR w_it_wbs5-lead.
select single parnr from ihpa into w_it_wbs5-lead
where objnr = w_it_wbs5-objnr and
parvw = C_LEAD and
KZLOESCH NE 'X'. " M026
PERFORM READ_PA0002 USING w_it_wbs5-lead CHANGING W_LEAD.
CLEAR w_it_wbs5-pdir.
select single parnr from ihpa into w_it_wbs5-pdir
where objnr = w_it_wbs5-objnr and
parvw = C_PDIR and
KZLOESCH NE 'X'. " M026
PERFORM READ_PA0002 USING w_it_wbs5-PDIR CHANGING W_PDIR.
CLEAR w_it_wbs5-pmgr.
select single parnr from ihpa into w_it_wbs5-pmgr
where objnr = w_it_wbs5-objnr and
parvw = C_PMGR and
KZLhi,
1.Capacity check takes place at plant level itself..
2.Pooled capacity:- This is created separately in [u wil find in PP] and this capacity can be used by different work centers.
regards
pushpa -
Selecting all items in Project manager
Using Robohelp HTML 9.
My main problem is getting the TOC to alphabetize. I have searched and read the two topics on this but the solution doesn't work for me.
The solution was to alpha the PM list, then delete the current TOC topics and drag and drop the newly alphabetized PM topics over to the TOC, but I can only drag one topic at a time from PM and move it over to the TOC pane and drop it? Surely there must be a way to grab them all and drag and drop?
Then I thought maybe I need to do it from the TOC folder in Project Manager? But when I open the TOC folder under PM it just shows me the name of my help file rather then a list of TOC topics.
So I'm stumped, this is a new product for me and my self learning is not very far along but I'm trying!
Thank you! Below I have posted a screen shot of what I am trying to do. Ahd below that the TOC folder under PM just shows me the filename?Hi there
You would likely have better luck selecting topics in the Topic List pod. In that pod you can sort topics alphabetically and even filter the view to specific folders.
Just select the topics in the pod, then click the column of icons and drag to the TOC to insert.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks -
Project manager can't find my songs
I have well over 100 song files on one of two internal sata drives in my mac pro. "SATA A" has my sample libraries. "SATA B" contains all my song files and audio recordings.
I want to use project manager to help identify what samples I have used with these songs. the samples are stored on "SATA A" within a huge library. The problem is that project manager doesn't seem to find any of my songs (stored on "SATA B").
I have done expanded sacans, localised/"specified where" scans. I've excluded locations and included locations but PM will not find any of my songs on my "SATA B" drive. It does however find sample data, audio, movies and everything else.
PM ~does~ find songs on my "SATA A" drive. These are songs included in my Kirk Hunter Emerald library - which I didn't even know existed! When I saw PM picked up the songs on SATA A drive I tried copying my songs to it from "SATA B". I did a full, extended scan from scratch and still my songs are not found.
I have checked their permissions. They all have .iso on the end and the finder sees them as "logic songs" via "get info". In fact they look identicle to the Kirk hunter songs that the PM sees. I have also checked sata b drive and compared to it sata a and they seem to be configured identically (bought/set-up at the same time etc).
I have tried deleting logic's pref files and PM data etc etc manually. still no joy.
Any ideas what I am doing wrong or what I can do to fix it?
About 10% of my songs (out of 100 to 150 songs) will be using exs24 samples from my sample library (KH Emerald is just one eg). I just want to save the associated samples with the songs for archiving. I do not want to have to save all my sample library with the songs if at all possible. Going through each song manually would take too long. I feel my only option right now is to save all songs and all sample library on specially purchased hard drive but I'd prefer to avoid this route. Any suggestions?
Sorry if I've asked this before but its driving me nuts.
Message was edited by: Thomas O'Carrollyep, I have scanned at every level, from everything to just a single folder that contains song files. After scanning a folder that conatins songs on my SATA B drive (the one that PM can't find songs), still the songs will not appear.
I have copied over my songs to the drive that PM seems to see songs on and guess what? It doesn't see those songs copied over.
This is driving me so nuts I have forgotten that I engaged in this thread...
http://discussions.apple.com/thread.jspa?threadID=1046126&tstart=0
Does anyone know what the option in the PM's file menu "import file maps" and delete all exported file maps" does? Or what its for?
It feels to me that some sort of database or referrence list etc etc has gone very wrong, but I have already tried deleting (manually) the PM data file in somewhere in the library folder etc etc.
Using file buddy I see that PM stores the a PM database as an invisable file on each drive you have connected. Presumably info for what is on that drive. Perhaps these invisable files need to be manually deleted???
Message was edited by Thomas O'Carroll because this forum doesn't work properly
Maybe you are looking for
-
I need the Click Once Add-in for 5.0.1 to run a software application on Win 7. Is this available?
We run a software designed to work with Microsoft's ClickOnce technology. I used the add-on FFClickOnce 0.8 with the older version of Firefox but it is not compatible with 5.0.1. Now I am back to IE :(. Is there a new add-on like this to use with the
-
Hello, I was trying to update my music library yesterday after the uploads I made I wanted to listen the songs on my device (Iphone 4S) but the sound of music was distorted, I was hearing small overlaps. I've tryed to Restart, it didn't worked, then
-
Runtime Error "DYNPRO_MSG_IN" and "MESSAGE_TYPE_X"
Hi Gurus, I getting the following Runtime Error "DYNPRO_MSG_IN" and "MESSAGE_TYPE_X" can anybody help me.. Thanks & Regards Manna Das
-
OBIEE+ w/ Peoplesoft, Peoplsoft Organizational Hierarchies tree into OBAW
Hello, the environment is OBIEE+ BI Apps w/ PeopleSoft HCM as source with Prebuilt informatica mappings, to import Organizational Hierarchy tree from Peoplesoft HCM into OBAW tables, the DAC has task parameters to be set. as per BI Apps documentation
-
How to wrap a stored procedure that outputs PL/SQL records for JDBC?
Hello everybody, Is there an example for wrapping a stored procedure that outputs PL/SQL records and/or PL/SQL tables of records, so that it can be called from JDBC? Since this is not possible with the Oracle JDBC driver, Oracle recommends "To wrap a