Problems w/ race conditions when using attachmovie

Hello,
   I'm having a strange problem w/ race conditions when using attachmovie.
I have a class linked to a movie clip that I'm attaching to the stage.   The class is
fired off when the movie clip is attached but also other classes are getting loaded at the same time
while the movie clips is attached.     Even though the other classes are called after the
movieclip is attached, they are getting loaded faster and therefor the class linked to the attached movie clip
cannot access their functions. 
I'm looking for a listener that will fire off an event ONLY when the attached movieclip is fully loaded but I can't
seem to find any examples of associating a listener to a attachmovie method.
Any ideas?
Thanks,
Clem C

flash is single threaded so nothing happens simultaneously.  what do you mean by, "other classes are getting loaded at the same timewhile the movie clips is attached"

Similar Messages

  • Problem quality of sound when use the microphone

    Hello,
    I have big problem.
    I have today buy the headphone HS-1000 gaming.
    My problem is when use the microphone (skype or mumble) my sound in game in very very poor !!!!
    I have latest drivers availible on creative website
    You have any idea ?
    Sorry for my bad english
    Regard
    Fifane

    Try converting to .mp3. You will almost always get some loss when converting one compressed format to another. It shouldn't be that noticeable though.
    What bit rate are your .wma files?

  • Problems with USB device when using WindowsNT

    Hi,
    my problem is that I want to use a simulator which can only be connected with USB to the computer.
    I used the VISA Driver Development Wizard as discribed in this link (http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416) and it didn't work.
    I'm using Windows NT and VISA 3.1 and I read that it isn't possible to create a USB connection with VISA when using Windows NT. So my questions
    1) is this right
    2) Has someone a idea what I can do? I tried to use VISA USB Control and this also didn't work.
    I hope I discribed my problem detailed enough. It's my first post.
    Thanks for your responses
    Joerg

    As you can see in this table, USB is not supported by VISA under NT:
    http://digital.ni.com/public.nsf/websearch/EE34F21ECC2BE01286256C52005D1A1F?OpenDocument
    I would recommend to use Win2000 or XP. Using one of these OSes you could use this turorial  to create your VISA-driver:
    http://zone.ni.com/devzone/devzoneweb.nsf/Opendoc?openagent&1D0DD81FF1448CAE86256D90006EE2B4
    If it is not posssible to change the OS, you have to look for other ways of programming your usb-device. Check the web or the Microsoft site for help concerning Windows SDK and USB.
    Hope this helps a little!

  • Orange mail software problem when using distribution lists : some lists cannot be used for writing e-mails. The problem does not exist when using Internet Explo

    When writing an e-mail directly on the Orange e-mail service (not on Thunderbird) I am facing the following problem : some distribution lists cannot be used to complete the adressees. The same lists can be used without difficulty if I use Internet Explorer instead of Firefox. The Orange hotline told me that probably my Firefox version was not updated. Unfortunately I checked that, and apparently the automatic updating works. I have also updated the plug ins, without any result.

    Please could you specify which webpage you mean ?
    The process with Orange is the following :
    - 1. click on "Write an e-mail" on the mail webpage
    - 2. click on "To" to reach the Contacts which opens a new window
    - 3. click on "Distribution lists"
    - 4. click on the selected list then click on "add". The list appears ot the box corresponding to the addresses .
    UNTIL THEN EVERYTHING WORKS WELL
    - 5. click on the button "validate", which closes the window previously opened and normally
    - 6. reloads the initial page with the complete list on the line "To". Instead of that I get the last e-mail address I previously used .
    Question : at which step of this process should I try your suggestions ? I tried when the initial page was reloaded with the wrong address, but it did not work to get back the rignt distribution list;
    Note that the whole process functions with OTHER Distribution lists. The only difference is that the problematic one has a larger number of adresses (62) however inferior to the maximum indicated by Orange (100).
    I also remind that there is no problem when using Internet Explorer instead of Firefox.
    Thanks for your help !

  • Problem exporting to excel when using embedded web templates through WAD

    Using web templates designed with WAD, we are experiencing an issue when trying to export excel when using embedded web templates. 
    We have set up tabstrips within our templates that load other templates (embedded into the global template). 
    Upon right clicking on any query and choosing "Export to Excel", any query that is in one of the tabs using the embedded web template item does not show up.  Any queries in natively in the global web template will export and show up fine.
    Any thoughts on how to enable something like this, or workarounds to make this work?  We decided to split up these templates for performance reasons and can't go back from that decision.  Also let me know if you need a better explanation of what we're trying to do.
    Thanks in advance!
    Jonathan

    Hi SDBI,
    Is this in place of loading a new template per tab?  We are using container layouts in all of our templates so we can link things into tabstrips as well, we have just split up some templates to be embedded into tabs for performance reasons and data locking.
    Also when exporting, we are looking for all of the items displayed at that time to be exported, however only the items from the global template show up, not all of the displayed queries.  For example, anything outside of the tabstrip will export perfectly, but since the query embedded into the template the tabstrip is loading is not part of the native web template, it does not show up.
    Seems like a tool limitation to me when embedding templates?
    Thanks,
    Jon

  • I have problems typing certain characters when using gmail or online forums. Can someone help?

    When I try to use an apostrophe, when using online forums or my email (all in safari), a white bar appears at the bottom of the screen displaying the punctuation mark but it will not allow me to use it. Any idea how I can fix this?

    Have you tried resetting your iPad?
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    No data will be lost.

  • Is there a way to 'latch' a boolean condition when using local variables? Help!

    Hello all
    I've made LOTS of progress on my vi over the weekend and even today.  I've been battling with a project with this scope:
    1.  Read temperatures from 24 locations (6 banks of four thermocouples).
    2.  Set individual channel temperature upper limits
    3.  Output temperatures, elapsed time and time stamp to file in 5 minute increments AND write data when an overtemperature condition occurs.
    4.  Use NI-switch to shut off a motor related to each of the 6 banks of thermocouples independently
    5.  Be able to start/stop elapsed timers on each of the 6 banks based on user input (start/pause) OR conditions (pause at overtemperature)
    6.  Be able to reset those elapsed timers with user input as well.
    I've gotten 1-4 working nicely (although my example included has the DAQ assistant replaced with random number generation) and the NI-switch cases replaced with a simple boolean indicator.
    My problems lie in two areas now.  First, I need the switch condition AND the 'pause time' to be 'latched' when an overtemperature is reached and NOT continue operation until user input.  Basically, when the motor relay is triggered to shut the motor off, I need the timer to stop with it and not restart when the input condition changes (in this case, when the thermocouple drops below the control temperature) until an operator tells it to resume.  I also need the switch condition to stay true so that my 1160 isn't switching back and forth every iteration until the temperature drops.
    You'll notice there's 5 'elapsed time' express VI's in conditional loops on there--and one time structure in a parallel while loop.  The outside structure is the way I'm heading as it retains the value in the elapsed timer when paused.  This is critical to the test!  All 5 of those elapsed time express VI's will be leaving in favor of more of those outside loop structures.  My issue with the outside timing loop structure is that I can't figure out how to 'reset to zero' with a user input like you can with the express VI's, and that it outputs only ms data rather than a HH:MMS format (not a complete deal breaker but would be nice).
    Please, anyone in the know, I need to button this up so I can get it implemented soon.  My old VI which is currently running the tests is far too user-unfriendly for most of the users to handle and the output to file is a wreck...  THANKS so much in advance.
    Ralph
    Still confused after 8 years.
    Attachments:
    temperatures.vi ‏730 KB

    I've looked up the enum constant and am completely baffled as to how to use this to do what I'm trying.  Can you shed a bit more light on the subject?
    Still confused after 8 years.

  • Problem with 'action' attriubte when using 'rendered'

    I have something really strange;
    I have a JSF page used to insert a record and when inserting is successful, I set a REQUEST scope parameter called 'saved' with a value of 'true' as following:
    FacesContext.getCurrentInstance().getExternalContext().getRequestMap().put("saved",true);Now, in the JSF page I already have a <h:commandButton ...> on the SAME previous JSF page used to collect the data :
    <h:commandButton rendered="#{requestScope.saved}" action="#{insertionBean.displayNew}" value="Create another"/>As it is shown, the rendering of this button is conditional ONLY after complete inserting. Until now every thing is OK, and the button rendered only as expected, but what is not expected is that when I click on the button the page only reloads and the method in the action attribute is never fired.
    Does the attribute rendered have something to do with RestoreView at the server side? Becasue when I DELETE it, the button fires the method, the problem is only when I use it in this scope.
    How I can accomplish this goal?!
    Thanks for helpful people

    The value of the rendered attribue is re-evaluated during apply request values phase. So you need to transfer it to the next request using h:inputHidden or, better, t:saveState (so that it also survives validations).

  • Problem with JMS migration when using Ctrl+C to stop the managed server in cluster

              Hi,
              I am having a clustered weblogic application running on Weblogic 7.0 SP5. My application
              uses JMS as a asynchrous communication. We have MDB which listens to these JMS
              messages.
              If something is being processed on Managed Server 1 and while the request is in
              process, i am stopping the the MAnaged SErver 1 using Ctrl+C.
              After this, i go to admin console and migrate teh JTA and JMS. After this, i am
              expecting other running Managed Server should restart the incomplete transaction.
              But this is not happening. The Managed Serve2 doesn't process the requst.
              But when i restart teh MAnaged SErver 1 again, it takes up the same request and
              processes it.
              Is this a known problem with Weblogic that it doesn't support Ctlr+C case?
              Please note that the same thing is working fine when i stop the server using Admin
              console(Normal shutdown OR forced shutdown).
              Any comments in this regards are apprecciated.
              Thanks,
              Naresh
              

              Hi,
              I am having a clustered weblogic application running on Weblogic 7.0 SP5. My application
              uses JMS as a asynchrous communication. We have MDB which listens to these JMS
              messages.
              If something is being processed on Managed Server 1 and while the request is in
              process, i am stopping the the MAnaged SErver 1 using Ctrl+C.
              After this, i go to admin console and migrate teh JTA and JMS. After this, i am
              expecting other running Managed Server should restart the incomplete transaction.
              But this is not happening. The Managed Serve2 doesn't process the requst.
              But when i restart teh MAnaged SErver 1 again, it takes up the same request and
              processes it.
              Is this a known problem with Weblogic that it doesn't support Ctlr+C case?
              Please note that the same thing is working fine when i stop the server using Admin
              console(Normal shutdown OR forced shutdown).
              Any comments in this regards are apprecciated.
              Thanks,
              Naresh
              

  • PROBLEM WITH ALT-V WHEN USING CROATIAN KEYBOARD

    Hi,
    When Typing ALT GR+V (@ sign) in Croatian Keyboard, all the text from clipboard is copied into the text box (as it is pressed CTRL+V) plus the @sign.
    There were some bugs filed long back regarding a similar issue for the German keyboard where the customer was using the AltGr key for special characters, same as in our case.
    Below is the list of those bugs:
    (1)     Bug 757614: GERMAN USERS CANNOT USE ALT-GR KEY TO GET SPECIAL CHARACTERS
    (2)     666925
    (3)     767865
    (4)     768658
    I have gone through the descriptions and mail chains mentioned in these bugs, and it seems that the issue was fixed in OJDK.
    Please go through the above mentioned bugs once to get more details.
    It seems that this is not ORMS issue. It seems to be an Oracle Forms or OJDK issue.
    Can someone please advise on this as why is this happening. We are using Oracle Forms 10g.
    Thanks and Regards,
    Ashwini Swaroop Pradhan

    Tom Gewecke wrote:
    w/ all the keyboards and language settings.
    What do you mean by that? The problem being talked about here is an inability to make French accented characters on a German keyboard. What is your problem exactly?
    I've posted here because I guess it may be the same bug.
    After upgrading I wasn't able to do special characters, including some accented vocals, like "ì", very common in italian language.
    Then I've added an english keyboard, removed the italian one and added it again, so the problem with missing accented vocals was solved.
    I still have the same problem with special consonants, like "z" and "c": if I hold my thumb on such letters, I have no options like, say, "ż" (such characters are very important for my field (linguistics) and if Apple won't solve this problem I'll be forced to look elsewhere).

  • Ibook G4 having  problem with airport connection when using secure network

    Hi,
    I am currently using a brand new Macbook. I am connected wirelessly to a Comcast network through my Netgear Wireless-N 150 router model WNR 1000. The problem I am having is with the 4 year old ibook when I go to use the airport and connect to my existing network it says the password is incorrect. I spent time troubleshooting this with Netgear and basically we found out that the ibook does connect with the network when there is no security at all.
    I erased the hard drive on this ibook to prepare it for sale and it is back to the factory settings. Is there some kind of firmware or drivers I am missing to use the airport as described?? I want to be able to show the buyer that the internet works etc. I also may want to install a few things on the ibook before the sale.
    Thanks a mil
    Message was edited by: omshanti

    Did you reset the wireless router to see if by default, it has a different
    wireless security then, than however it presently is set up?
    The question you pose appears to be marked "answered or solved."
    When you reinstall an OS X, the setup asks if you have an existing
    wireless connection, or if you will be getting a new one; by default,
    the setup will make the existing one the automatic one for OS X.
    You should not have to add passwords or other, unless there has
    been one set in KeyChain or for the specific wireless base in question.
    Tiger 10.4.x does not require you to have a set password for wi-fi,
    but you will find several levels of secure options available in OS X.
    Not sure why your setup and configuration is problematic. Usually,
    a totally new OS X installation is without issue. Sometimes, you
    may have to administer a base station via Ethernet cable before
    some configurations can use it, but an existing network should be
    easy, unless it already has a password security in place.
    The Mac will work without a password-protected wi-fi internet source;
    often it will 'just work' even when moved to a new environment and
    a neighbor's network, if not password protected, will appear among
    other options in your vicinity and it will be automatically available.
    Not sure if any newer OS X update parts, from the Combo update
    files to take Tiger 10.4 to 10.4.11, plus others, would help the Mac
    connect better to whatever wireless source of internet available.
    I've not had that issue, as you state, except for when someone has
    a protected network or passwords in place. Mine has passwords to
    keep unauthorized neighbors from easy access; just in case.
    In remote locations where few neighbors exist who could access wi-fi
    from a lone source, no wireless security settings at all, work just fine.
    I've done that; and found a little greater range was gained in signals.
    And in the city (largest town in state) a computer I'd set up for use in
    a password protected wi-fi network - later worked fine and found the
    new owner's own wi-fi network without issues; and I had let the OSX
    setup assistant do its job. If a local network is protected by WEP or
    WPA2, etc with a password, one would be needed to access it. If not,
    then the connection should be automatic.
    Good luck & happy computing!

  • Problems about trackpad+keyboard when using Leopard on Macbook Pro

    I'm using Macbook Pro Multitouch 2.4 and I have two problems while using this laptop. have anyone same problem with me?
    1- about trackpad: I 'm not usually using tapping trackpad, but when I try to use tapping trackpad for a while, trackpad cannot tap. So I must change to click trackpad. When I logging out or restarting, the trackpad can tap again.
    2-about keyboard+trackpad: I sometime get freezing keyboard+trackpad excepting power button. But when I close the lid to sleep my laptop and open it again, it return normal but after a while it continue this problem.
    I'm using Leopard v1.5.3 although 1.5.2 also have the same situations.
    Anybody help me T_T

    I found this solution elsewhere on the forum:
    http://discussions.apple.com/thread.jspa?messageID=7245983&#7245983

  • I have been having problems with YouTube functionality when using Firefox, some of them having begun with the latest Firefox update

    After a fairly recent update, I began having the option to paste text disappear, I've had backspace cause the browser to go back to the previous page while in a text box, and other issues which are apparently a matter of Firefox not recognizing the fact that I am typing in a text box.
    After the last update, suddenly YouTube video page URL links no longer translate into links containing the title of the video, and also things like the use of bookend asterisks in order to have text appear in bold typeface no longer work.

    i have the same problem with the above..firefox is running too slow with the games in facebook..but it runs good when browsing my updates, msgs, photos...firefox is totally opposite of IE..IE is faster with the games and slow while browsing..i love to use mozila but when i do games it really pisses me off...hope you could help me..

  • Problem with string constructor when using byte array as parameter

    I am creating a string using constructor and passing byte array as parameter.This byte array i am getting from MessageDigest's digest() method,i.e. a hash value.
    The problem is when i iterate through byte array i can able to print all the values in byte array.But when i construct a string from that byte array and printing that string ,that is printing some unknown characters.
    I don't know whether i need to pass charsequence to the constructor and the type of charsequence.Can anybody help me?
    Thanks in advance

    Is there some problem today? I'm getting this sort of thing all over.
    I already told you and so did Kayaman. Don't. String is not a holder for binary data. You have to Base-64 encode it. If you don't you cannot reconstruct the original binary digest value, so putting it into a database is completely utterly and entirely pointless.
    Is that clear enough?

  • Problem with EL evalulation when used to assign component ID in ui:repeat

    Hello everyone,
    I've a problem when I try to assign the ID of a component with an EL within an ui:repeat component, e.g.:
    0 <ui:repeat value="#{dm.categories}" var="category">
    1      <rich:panel id="catPanel#{category.id}">
    2         ....
    3       </rich:panel>
    4       <someohtertag someatt="catPanel#{category.id}" />
    5  </ui:repeat>The above page renders correctly but the id in line 1 evaluates to ...catPanel in HTML. The other tag evaluates of course correctly to catPanel123.
    When I use an EL variable from outside of the repeat tag it evaluates.
    Am I doing something wrong here or are the ID attributes evaluated in a different rendering pass?
    Does anyone have another idea how to assign the IDs in such a manner?
    ciao,
    Elmar

    Hi,
    Check in t.code CMOD whether project is active or not (Activate the Project)
    BR,
    Vijay

Maybe you are looking for