Problems watchin videos on different players

Hi guys,
I have a slow system (1 gb ram, a 1.7 ghz celeron and a on-board video chipset) and that's why I installed Arch. I installed the intel video driver and more video players (vlc, mplayer, smplayer, totem) and the needed codecs. I want to watch some pour quality movies. I had more linux distros including xubuntu (12.04) and ubuntu (9.10). On these distro's the videos played good, even in full screen. On xubuntu it played with smplayer and in ubuntu with vlc. But on Arch I can't make them work. On smplayer it playes very slow and the video and audio are not synced. In full screen it is worse. And vlc doesn't play them at all and the process hangs. What should I do to make them play just fine? If any info's are required tell me and I'll answer. Thanks

@karol
The output of lspci | grep VGA is:
01:00.0 VGA compatible controller: S3 Graphics Ltd. VT8375 [ProSavage8 KM266/KL266]
I have tried with mplayer and it works good, but the same problem appears at full screen.
The videos I'm trying to play are 624 x 352 .avi and .mkv
The CPU is almost at 0% when I play the videos
@skanky
I'll try ffplay and edit the post.
@Pse
I have installed the video drivers but I don't know how to check they are working corectly.
Thanks, I'll try mplayer-vaapi but still I don't know if the gpu supports VAAPI.
Thank you all.
LE:
Installed mplayer-vaapi and it plays slow, just like the others. ffplay works pretty good even in full screen. It still works a little slow, but if I don't have something else to do and it is impossible to make them run like on (x)ubuntu, I'll use this.
Last edited by bcman (2013-09-18 12:46:11)

Similar Messages

  • Video and audio players will not show in Firefox. Players show in Safari and Chrome. (Mac computers). Do I need a plug-in?

    Tested on 3 apple mac computers:
    Mac Pro, Mini Mac and Macbook Pro.
    Each computer running Mountain Lion and Firefox 11.8.800.94
    Video and audio players not showing on website (video player is JWPlayer)
    Error on video player placeholder says 'No video with supported format and MIME type found'
    When the same site is access via either Chrome or Safari then the video and audio players show with all of the controls.

    You get this error if the video tag is used and not an object or embed tag that specifies a Flash player.<br />
    So this doesn't look like a problem with the Flash player as it is most likely not used in this case.<br />
    If there is fall back code to use a Flash player then it isn't working.
    Clear the cache and the cookies from websites that cause problems.
    "Clear the Cache":
    *Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox > Preferences > Privacy > Cookies: "Show Cookies"

  • Adding video in different quality into iTunes library

    I have the problem with importing my video in different quality (for iPhone 3GS, Full HD and so on) into my iTunes Library.
    Before upgrade of my mac pro 1.1 to Lion 10.7.5. from Snow Leo I was able to drag the whole folder with video files in different quality onto the Itunes windows and iTunes added all formats (M4V with different quality) and assigned it with single movie. Now Itunes addes only one file to its library. So I have to choose in which quality to add file, because it is impossible to add the same file in other quality. It is possible to back this feature back in present configuration?
    Lion 10.7.5 (it is impossible to upgrade to Mountain Lion)
    iTunes 11.0.2
    Thanks in advance,
    Alexander

    some kind of solution: to copy all files to the iTunes Media Folder and to drag and drop them from there pressing OPTION (do not copy - only link)

  • Flash Builder embed video in different stages

    Hi, I'm Paulinho Cé from Brasil and i have a problem to embed youtube videos on my site in different stages FlashBuilder.
    I have 10 videos and want to display them in the event of each button corresponding to a different stage.
    This code works in the main application but not in the stages of the site, because the functions and variables are global and can not change the url of the video to a video display differently at each stage.
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
    layout="absolute" verticalAlign="top"
    creationComplete="Init();" >
    <mx:Script>
    <![CDATA[
    private function Init():void
    var url:String = "http://www.youtube.com/v/zlfKdbWwruY&hl=en&fs=1"; //url extracted from embed code
    Security.allowDomain(url); //allow domain
    youtubevid.load(url); //load video
    ]]>
    </mx:Script>
    <mx:VBox width="100%" height="100%" horizontalAlign="center" verticalAlign="top" verticalGap="0">
    <mx:Label text="YouTube Video Embedded Inside Flex" width="100%"  color="#060809" textAlign="center" fontSize="16" fontWeight="bold"/>
    <mx:SWFLoader id="youtubevid" verticalAlign="top" horizontalAlign="center"  width="425" height="344"/>
    </mx:VBox>
    </mx:Application>
    <iframe title="YouTube video player" width="480" height="390" src="http://www.youtube.com/embed/kdhuQJRW6kA" frameborder="0" allowfullscreen></iframe>
    Because this solution is of extreme importance to me, I requestthe help of experts, which immensely grateful.
    Thanks for all,
    Congrat's
    Paulinho Cé

    This appears to be Flex question. Please try posting this to the Flex forums here http://forums.adobe.com/community/flex/flex_general_discussion for better response.

  • Regular problem with video playback & audio video sync

    So, I am regularly having two problems (I wonder whether they are connected) that I cannot solve and am hoping someone can tell me if I am out of luck or if I need to do something or add something.
    For example, because it happened again today. These are details about the file stuff:
    Type:AVI
    Bit Rate:133kbps
    Dimensions:624x352
    Audio format: LameMP3
    Frame rate: 23 frames/second
    Data Rate: 1131 kbps
    Video Sample Size: 12 bit
    Video Compression: XVID
    First Problem: If I play the file - I use Media Player Classic - it plays fine. Open it in Windows Media Player and it plays fine. Try to edit it in Premiere and the file loaded into Premiere is filled with what I believe are called audio video sync problems, so I have to constantly unlink audio and video and adjust it. It loads and does not need to conform.
    I have the same problem on my laptop(Windows XP Home) and desktop (XP Pro), the desktop with twice the RAM. I have the K-lite Mega codec pack installed. I would call myself a beginner when it comes to video editing. I understand generally what codecs are but I am not capable to making any tweaks to the K-lite Mega codec pack (if I should have) so it is setup as installed.
    Second Problem: The video in the playback box never plays back normally. I have tried adjusting the playback settings: have changed the aspect ratio between the software and harware option and adjusted between the three desktop display options. Occasionally it is "ok" but most of the time not and never just normal.
    Any help is much appreciated.
    Thank you.

    I tried this already and then we had a blackout so going to try again and hope it goes through before a second one...lol
    Hello:
    Thank you Robert J. Johnston, the_wine_snob, Paul_LS and SteveGrisetti for your help so far.
    So this is where I am at now:
    Files all seem to be of the same type, so I will just say "the file" for the one I am working with right now.
    Loaded file into VirtualDub.  I like that program.  Well done, whoever made it.  Did some basic cutting of unwanted stuff.  Saved as AVI.  Saved both a Direct Stream Copy and a Full Processing Copy.
    Opened the FP copy in Premiere Elements and it plays without audio sync problems that I can see. Have edited it some so far and still no problems.
    Before I do any more editing work, I decided to save it (SHARE) in different formats to see what happens.
    Goal: Looking for no audio sync problems.  Best quality I can get with a 1GB file size limit.
    Saved as DV-AVI:  plays fine.  no audio sync probelms.  love the video quality.  2.95GB, so too big
    Saved as Flash:  Do not see any audio sync problems.  Do NOT like the quality (flips back and forth between clear and all pixely (is that a word).  32 MG
    Saved as Mpeg: Media Player won't play it (thought Media Player with KL Mega Codec played everything?) (It loads it but doesn't play?); Quicktime won't play it.  Windows Media Player just did.  Do not see any audio sync problems.  Like the video quality. 631 MB.
    Saved as Windows Media: Do not "think" there are any audio sync problems; if there are, they are very subtle.  Not crazy about video quality.  Better than flash video option though still flickers between two types of qaulity (if that makes sense) . 52MB
    Any suggestions as to what I should do at this point to meet my stated goal.  I assume [share]ing is what I should do?  Is there any exporting or any other options I do not know about.  Without your help I figure I will Share to MPEG?  Not sure why Media Player won't play it and Windows Media Player will?
    Any thoughts on the best choice for me?  Thanks for your help.

  • Problem with video playback with iTunes

    Several problems :
    Problem with video playback with iTunes -
    Since about a week, When I launch a video, it takes a long time to get started, then only the sound starts with no pictures - If I press pause then play the video is played normally. Did anyone face or heard about same kind of issue .
    Problem with permission disk errors
    After re-installing White Tiger and After I installed the last OSX 10.6.5 update
    I found the following problem
    Group differs on "Applications / Utilities / AirPort Utility.app / Contents / Resources / wanArrow.png", should be 0 instead of 80.
    Last but not least :
    My computer seems slow - I have 60gig free on My hard drive and I test my hard drive and everything seems all good .

    What was the fix for this? Everything has sucked for my itunes video playback since the last major revision release.

  • Problems Capturing Video from a Canon GL1

    Hi All,
    I have posted this topic once before on the iMovie Discussion Forum. Please refer to this thread:
    http://discussions.apple.com/thread.jspa?threadID=547019&tstart=75
    I haven't been able to get an answer so far. Does any one in this Discussion area know how to solve my problem?
    (Problem is: video captured from the GL1 shows two vertical black bands on the left and right side of the frame, an effect similar to pillarboxing. It almost looks as if I'm only getting 640 by 480 instead of 720 by 480 pixels. This happens regardless of whether DV was shot in 4:3 or 16:9. I also own a Sony DCR-PC101 camcorder, and the video captured from that camera using the same settings (in iMovie and/or FCE) fills the entire 720 px horizontal width with no vertical bands, so I know it's not a software or a settings problem, but a camcorder problem.)
    Any help will be greatly appreciated!
    Mac G4 Quicksilver   Mac OS X (10.4.7)   17" Powerbook G4, iMovieHD and Final Cut Express

    Hello, Dave
    Have you taken a tape shot on the GL-1 and used the
    Sony camera to capture the footage via firewire? Do
    the vertical stripes show up when shooting 4:3?
    Yes, I have done that and yes, the vertical stripes still appear. The vertical stripes appear both in 4:3 and 16:9 footage.
    If the vertical lines don't show up on your NTSC
    preview monitor, I wouldn't worry about it. They are
    probably outside of the safe area and won't affect
    its viewability much.
    You are probably right, Dave, it's quite possible that the vertical stripes are outside of the safe area in 4:3. However, I am new to 16:9. Is this the case also in 16:9? I am talking about maybe 20 or 30 pixels wide black bands on either side of the frame.
    If you are capturing the video via analog from the
    canon into some type of DV bridge, These vertical
    bands are normal and represent horizontal sync
    characteristics.
    No, I am capturing the video directly through Firewire.
    Canon does several tings in anunique way that differs
    from what a person would expect. You may have
    stumbled onto one of Canon's quirks.
    I think you are right about that too. I emailed Canon technical support a little Quicktime movie containing two shots, one from the GL-1 and one from the Sony, but I haven't heard back from them yet...
    Hope this helps. Post back.
    Regards,
    Dave F
    Thanks for your post, Dave.

  • Confused about different glitches on different players

    I am making a bunch of DVDs to go out to festivals and friends and I have been really confused with the way the dvds I have made act differently on different players.
    I just played the dvd on my mac through Mac's DVD player and I had to press menu in order for the dvd to begin while when I played it on a regular dvd player it started up right away. On the other hand, on the regular player, my first menu freezes up after a few seconds and I have to restart the dvd every time. It doesn't do this on any of the other menus, just the main one. When I played the dvd on my computer, there is no problem with the first menu freezing.
    Can anyone help? I need these dvds to play without confusion when I am submitting them to festivals and programmers who don't have the time or patience to deal with little glitches like this and will just skip over my film if something weird happens. Thanks.

    Forget about what I was writing - I got an old version of the program which did not write a UTF-8-File. Doing so
    solved the problem as expected.

  • Problems with video playback

    Hi all.
    My system is: P4 2.6 ghz, ATI Radeon HD 2600 XT 256 DDR3 AGP, 1024 mb DDR RAM.
    I installed arch.
    Also I installed alsa, codecs, gstreamer codecs, vlc, mplayer, totem, gnome, catalyst dirver, etc. All from repos. Default kernel.
    During video playback picture freeze in few seconds each 10-15 minutes, but sounds continue playback. In this freezing time, my CPU raise to 100% utilization according gnome cpu monitor. After few seconds of freezing system comes back. It happens each 10-15 minutes. Compiz is off.
    I tried to run video using console, I run mplayer, vlc and totem in console, choose video file and playback. Only vlc shows error message from av codec and "(maybe computer too slow?)" message. Other players show nothing about freezing.
    Video file - simple video, not HDTV.
    A have ubuntu on another HDD, in ubuntu video playback is ok.
    My xorg.conf from arch
    cat xorg.conf
    Section "ServerLayout"
    Identifier "Default Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    Option "AIGLX" "on"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "extmod"
    Load "dbe"
    Load "dri"
    Load "xtrap"
    Load "record"
    Load "GLcore"
    Load "glx"
    Load "freetype"
    EndSection
    Section "InputDevice"
    Identifier "Generic Keyboard"
    Driver "kbd"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us,ru"
    Option "XkbVariant" ",winkeys"
    Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
    EndSection
    # commented out by update-manager, HAL is now used
    #Section "InputDevice"
    # Identifier "Configured Mouse"
    # Driver "mouse"
    # Option "CorePointer"
    #EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    Option "UseFastTLS" "1"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Section "Extensions"
    Option "RENDER" "Enable"
    Option "DAMAGE" "Enable"
    Option "Composite" "Enable"
    EndSection
    Help me, please.
    p.s. sorry about my English.
    Thanks.
    Last edited by skoder (2008-11-30 14:07:11)

    I made update.
    Now I have catalyst 8.11. I`m testing video playback with different players, it take some time. I`ll write about results.
    By the way, today I found another strange bug with fglxr. While I resizing x-chat window, X locked and all key combinations not working. Only hard reset can reboot computer. After that, in /var/log/messages.log I found these lines:
    Dec 3 22:47:33 fabian [fglrx] ASIC hang happened
    Dec 3 22:47:33 fabian Pid: 3474, comm: Xorg Tainted: P 2.6.27-ARCH #1
    Dec 3 22:47:33 fabian [<f8dea65e>] _ZN4Asic16WaitForBitsClear19ConditionSuccessfulEv+0x1e/0x70 [fglrx]
    Dec 3 22:47:33 fabian [<f8d67929>] firegl_hardwareHangRecovery+0x19/0x30 [fglrx]
    Dec 3 22:47:33 fabian [<f8de99db>] _ZN4Asic9WaitUntil15ResetASICIfHungEv+0xb/0x20 [fglrx]
    Dec 3 22:47:33 fabian [<f8de9977>] _ZN4Asic9WaitUntil15WaitForCompleteEv+0x97/0xf0 [fglrx]
    Dec 3 22:47:33 fabian [<f8df434c>] _ZN8AsicR60016ASICIdleInternalEN4Asic15idle_WaitMethodE+0xcc/0x1f0 [fglrx]
    Dec 3 22:47:33 fabian [<f8dc5b86>] QSSubmitList+0x56/0x170 [fglrx]
    Dec 3 22:47:33 fabian [<c0310000>] cpu_init+0x8/0x29a
    Dec 3 22:47:33 fabian [<f8de811c>] _ZN4Asic7PM4idleENS_15idle_WaitMethodE+0x4c/0x80 [fglrx]
    Dec 3 22:47:33 fabian [<f8de1245>] _ZN15QS_PRIVATE_CORE7PM4idleEN4Asic15idle_WaitMethodE+0x35/0x70 [fglrx]
    Dec 3 22:47:33 fabian [<f8dce3f1>] _ZN10QS_PRIVATE11synchronizeEv+0x31/0x40 [fglrx]
    Dec 3 22:47:33 fabian [<f8dc5cb7>] QSSynchronize+0x17/0x20 [fglrx]
    Dec 3 22:47:33 fabian [<f8dcf0b9>] _Z14uQSSynchronizej+0x19/0x20 [fglrx]
    Dec 3 22:47:33 fabian [<f8dd780b>] _Z8uCWDDEQCjjjPvjS_+0x3db/0x1260 [fglrx]
    Dec 3 22:47:33 fabian [<f8dc51a4>] CMMQS_uCWDDEQC+0x34/0x40 [fglrx]
    Dec 3 22:47:33 fabian [<f8d86b92>] firegl_cmmqs_CWDDE_32+0x402/0x4b0 [fglrx]
    Dec 3 22:47:33 fabian [<c01c64a6>] proc_get_sb+0x96/0x160
    Dec 3 22:47:33 fabian [<f8d852dd>] firegl_cmmqs_CWDDE32+0x8d/0x140 [fglrx]
    Dec 3 22:47:33 fabian [<c01220d7>] __dequeue_entity+0x57/0xc0
    Dec 3 22:47:33 fabian [<f8d85250>] firegl_cmmqs_CWDDE32+0x0/0x140 [fglrx]
    Dec 3 22:47:33 fabian [<f8d85250>] firegl_cmmqs_CWDDE32+0x0/0x140 [fglrx]
    Dec 3 22:47:33 fabian [<f8d62717>] firegl_ioctl+0x227/0x2b0 [fglrx]
    Dec 3 22:47:33 fabian [<c01c64a6>] proc_get_sb+0x96/0x160
    Dec 3 22:47:33 fabian [<c01c64a6>] proc_get_sb+0x96/0x160
    Dec 3 22:47:33 fabian [<c01c64a6>] proc_get_sb+0x96/0x160
    Dec 3 22:47:33 fabian [<f8d576b7>] ip_firegl_ioctl+0x17/0x20 [fglrx]
    Dec 3 22:47:33 fabian [<c01c64a6>] proc_get_sb+0x96/0x160
    Dec 3 22:47:33 fabian [<c0197038>] vfs_ioctl+0x78/0x90
    Dec 3 22:47:33 fabian [<c01970b7>] do_vfs_ioctl+0x67/0x2f0
    Dec 3 22:47:33 fabian [<c01973a6>] sys_ioctl+0x66/0x70
    Dec 3 22:47:33 fabian [<c0103ef3>] sysenter_do_call+0x12/0x33
    Dec 3 22:47:33 fabian [<c01c64a6>] proc_get_sb+0x96/0x160
    Dec 3 22:47:33 fabian =======================
    Dec 3 22:47:33 fabian pubdev:0x1f8f142a0, num of device:-119273289 , name:<NULL>, major 55, minor 0.
    Dec 3 22:47:33 fabian device 0 : 0xf8e408b7f7d84000 .
    Dec 3 22:47:33 fabian Asic ID:0x9586, revision:0x1a, MMIOReg:0x8f8c60000.
    Dec 3 22:47:33 fabian FB phys addr: 0xe0000000, MC :0xe0000000, Total FB size :0x10000000.
    Dec 3 22:47:33 fabian gart table MC:0xeff73000, Physical:0x0, size:0x88000.
    Dec 3 22:47:33 fabian mc_node :MC_NODE__AGP, total 1 zones
    Dec 3 22:47:33 fabian MC start:0xd0000000, Physical:0xd0000000, size:0x10000000.
    Dec 3 22:47:33 fabian Mapped heap -- Offset:0x0, size:0x2000000, reference count:5, mapping count:0,
    Dec 3 22:47:33 fabian mc_node :MC_NODE__FB, total 1 zones
    Dec 3 22:47:33 fabian MC start:0xe0000000, Physical:0xe0000000, size:0x10000000.
    Dec 3 22:47:33 fabian Mapped heap -- Offset:0x0, size:0xff73000, reference count:6, mapping count:0,
    Dec 3 22:47:33 fabian Mapped heap -- Offset:0x0, size:0x1000000, reference count:1, mapping count:0,
    Dec 3 22:47:33 fabian Mapped heap -- Offset:0xff73000, size:0x88000, reference count:1, mapping count:0,
    Dec 3 22:47:33 fabian Mapped heap -- Offset:0xfffb000, size:0x1000, reference count:1, mapping count:0,
    Dec 3 22:47:33 fabian Mapped heap -- Offset:0xfffc000, size:0x4000, reference count:1, mapping count:0,
    Dec 3 22:47:33 fabian mc_node :MC_NODE__GART_CACHEABLE, total 3 zones
    Dec 3 22:47:33 fabian MC start:0xbf400000, Physical:0x0, size:0x10c00000.
    Dec 3 22:47:33 fabian Mapped heap -- Offset:0xc00000, size:0x100000, reference count:1, mapping count:0,
    Dec 3 22:47:33 fabian Mapped heap -- Offset:0xb00000, size:0x100000, reference count:1, mapping count:0,
    Dec 3 22:47:33 fabian Mapped heap -- Offset:0xa00000, size:0x100000, reference count:1, mapping count:0,
    Dec 3 22:47:33 fabian Mapped heap -- Offset:0x900000, size:0x100000, reference count:1, mapping count:0,
    Dec 3 22:47:33 fabian Mapped heap -- Offset:0x200000, size:0x700000, reference count:2, mapping count:0,
    Dec 3 22:47:33 fabian Mapped heap -- Offset:0x0, size:0x200000, reference count:2, mapping count:0,
    Dec 3 22:47:33 fabian Mapped heap -- Offset:0x0, size:0x11000, reference count:1, mapping count:0,
    Dec 3 22:47:33 fabian Dump the trace queue.
    Dec 3 22:47:33 fabian End of dump
    It looks nice, yeah?

  • Problem Playing Video in Premiere Pro CS4

    I am having a problem playing video in premiere pro. When I input any movie clip and try to play it in both the timeline and in the preview mode, the audio works fine but the video only plays a few seconds worth of footage at a really slow pace so that it takes up the entire time. For instance if I load a 3 minute video, the sound is normal but over the coarse of that 3 minutes I will only see a small number of the frames and they are cycled through in ultra slow motion.
    All the clips play normally outside of premiere. I have uninstalled and reinstalled the program. I have premiere installed on my laptop and it works fine. I have tried rendering the video first and it still doesn't work. I have tried holding shift before the program is loading and it did nothing. I have downloaded all the updates too. Videos seem to play fine in After Effects.
    Also, I am having trouble when importing HD video into premiere and after effects. For some reason the programs freeze when I try to import footage from my Creative Vado HD pocket video camera.
    Here are my computer specs
    Windows Vista Ultimate 32 Bit
    Intel Core2 Quad q8200
    ATI Radeon 4670 Graphics Card
    Gigabyte Motherboard
    4GB of 800 Mhz RAM
    This is really frustrating. Any help would be greatly appreciated

    Keith,
    The file extension .AVI indicate a "wrapper." All sorts of stuff can be in that wrapper *. Some of that stuff will play/edit fine. Much will not and create issues, as you have seen. Your camera uses a CODEC to create those .AVI files. That CODEC is the issue. I recommend G-Spot to find out what the CODEC is. Some times it's just a matter of having the proper CODEC installed on the computer. Most of the time, it takes much more than that - hence Eddie's links on "conversion." At least G-Spot will get us all on the same playing field, and explicit help can follow - probably to study Eddie's links. My guess is that your camera uses some form of DivX CODEC, hence the problem that you see.
    Good luck,
    Hunt
    * Think of .AVI like the foil wrapper on a stick of gum, when you remove the outer lable. You know it's gum, but not what flavor. Could be Juicyfruit, or Spearmint, or Double-mint. G-Spot will tell you the flavor. PrPro likes some flavors, but hates others.

  • Problem with video playback

    I just updated to 3.6.14 and after I did I'm now having problems viewing videos. The video plays, but in the right third of the screen there is a flashing block of red. Here's a screen cap of what it looks like:
    http://www.flickr.com/photos/25730352@N02/5492729261/
    I tried viewing the same videos in Safari and didn't have a problem. Apple software is up to date as is Adobe Flash.
    Is there some way to fix this?

    This happened to me while I had numerous programs running as well as Itunes...are you running anything like, LimeWire, chatting programs, internet browser, or anything like that? Close em down
    Hope this helps

  • I'm having problems uploading video taken with my iPhone 4 to Photobucket.  FB will not accept the file extension which is ex. IMG_423.  They will play on my computer and will upload to Facebook.  Why is the phone taking video with this file instead of so

    I'm having problems uploading video taken with my iPhone 4 to Photobucket.  FB will not accept the file extension which is ex. IMG_423.  They will play on my computer and will upload to Facebook.  Why is the phone taking video with this file instead of something like .mov or mp4.  How can I change the extension after the fact and avoid it in the future?

    You said, "the 4 also has signal and wifi whereas the 5 has only wifi". By "signal", I'm assuing that you mean cellular signal. If so, that means your iPhone 4 is still active on your cellular number and your iPhone 5 is not. Contact your carrier to sort out which phone is active on your account.

  • PROBLEms with videos imac G4 flat 17'

    PROBLEms with videos in imac G4 flat 17'

    It would help to know what videos you are having trouble with?   Are these from specific internet links? Are these playing back commercial DVDs? Are these videos produced by iMovie, Final Cut Pro, or iDVD of home video? Are these videos imported from an external Firewire or USB adapter such as Elgato's devices. You give us little to go on.   Please give us more details what is going on?

  • Problems streaming video (after 5-10 mins)

    Hi,
    I used to have no problems streaming video (hulu, espn3 etc), but recently my quality starts dropping out after 5-10 mins. It starts off fine but then the video starts getting jumpy then the audio starts to fuzz out. If I refresh the browser and even restart. the problem can still be there.
    Does anyone know what the problem could be? Is there any chance that this not an issue with my computer, but with my internet connection?
    Thanks!

    I too am having this same issue.  I have only started having it after installing Lion.  I am forced to restart my computer if I wish to watch a video.  I have no solutions!

  • Problem watching video

    All of a sudden I have a problem watching video downloaded from the web. The videos seems to download fine, but when they begin to play in Safari, all I get is the audio. No video image plays at all. Any help on this would be appreciated.
    Thanks

    Iwilsmar....try this forum...
    http://discussions.apple.com/forum.jspa?forumID=932
    the QuickTime experts reside there
    iMacIntel C2D 20"/2.16/3GB RAM/250GB...iMac G5 17"/1.8/1GB RAM/200 GB   Mac OS X (10.4.10)   Seagate160GB/WD160GB/Nano/ Shuffle/Logitech Z5300e/FireWave/SRS iWOW/iSight

Maybe you are looking for