Problems when distributing AUC to asset

Hi all,
I have tried to search all the notes and forum but cannot find a solution.
My user tried to post a $2000 account in auc to a fixed asset account using line item distribution rule. The amount in the rule is $2000, exactly the same as the auc account.
But there is this error message when he post,
"Amount to capitalize is lower than 10,000 SGD, please check!
Message no. Z3 002"
But he has posted amount less than 10,000 before and there are no such limitation. I cannot identify where or what causes the limitation.
Anybody can help?
Albert Lee

Hi,
I have tried t.code oba0 but it is not recognized. I am using 4.0B
oba4 I got the following result
Upper limits for posting procedures
Amount per document 1,000,000,000,000.00
Amount per open item account item 10000,000,000.00
Cash discount per line item 10.000%
Permitted payment differences
Revenue 10%
Expense 10%
It seems that amount is within limit.
My AUC account is $33,300 but my user is posting one of the line item which is $2000, using the distribution rule fixed amount of $2000, which is the same as the amount to post. According to my user, he has posted smaller amount without encountering this problem.
Any other place I can check or what can i do to allow the posting?
Albert Lee

Similar Messages

RecordsLocation Problem When Distributing

Problem: I have installed a Course I've developed but it keeps using the old settings and records from a previous installation.
Everything works fine while I am developing and even after I publish my course. I can save user settings and read them back with no problem. I used FileLocation^"My Records" as the third argument in the JumpFile function so I can store the records where the Authorware file is at.
I used RecordsLocation^"My Records/file.txt" to write and read the files with no problem.
The problem happens after I installed my course using an installation program. While testing the Course, I found it does not write or read from where the Course is at. Hence, if I install and uninstall the course, and reinstall the Course, it reads the old settings I had previously saved.
I want to delete or remove all old settings and records when I do an uninstall of the Course so when I do a reinstallation of the Course, everything is set to its originally values.
I used the RecordsLocation variable in my Course so I can see where the records are stored and it displays local..e.g c:\Program Files (86)\Course\RecordFolder\ so I know it is not supposed to be using the Authorware default of c:\\\A6W_data.
Thanks for your help
Maafi

I finally figured out my Course folder didn't have write permissions when it gets installed. So I changed a setting in my installation program to make the Course folder with user permission of Modify. The course is not web but for installing on a local hard drive. It finally works!!
Thanks for the quick response.
Maafi

AUC legacy assets uploading through AS91 transaction code with TT- 900

Hi,
I am uploading the AUC Legacy assets through AS91 transaction code.
In AS91 - I need to select Transactions option & should enter the transaction type 900 to give the Legacy AUC valules.
When i give the Transactioon type 900 for AUC assets load in AS91, the system is giving the Asset Value Data as 01/04/2009.
But the Asset Data takeover date given in the system was 31/03/2009. But why the system is taking 01/04/2009 (This is Fiscal year starting date for Country India).
#Now my problem is i should get the *Asset value Date -31/03/2009 but not 01/04/2009.
Kindly advise me how to change this asset value date to 31/03/2009 from 01/04/2009? It would be a great help for me if any one can help me or provide me some inputs...
Thanks
Kishore

Hi Zubin,
Thanks for your reply.
1. we are using V3 fiscal year variant (March-April)
2. In the Path given by you - I have maintained March -31,2009 for transfer date. In this case system is taking the 1st' April,2009 (This is next financial year first date)
3. But I should get the same date as transfer date (31st march,2009). I dont want next fiscal year first date as AUC asset value date.
4.how can i change this value date?
Thanks
Kishore

Transfer from AUC to Asset

Hi
I have small problem in settlement.
1.We ran settlement using KO88 for single order and posted to AUC using "Automatic settlement".Then ran "Full setllement" and posted value from AUC to Asset successsfully.
2.But we want to reverse the same.
So went to KO88 again and selected "Full settlement" and reversed from Asset to AUC.The again selected "Automatic settlement" and reversed from AUC to Internal order successfully.
Now we want to again run stellement and post to final asset with REGULAR PROCEDURE with KO88..But getting problem in step2 as mentioned below.
Step1: ran KO88 with "Automatic settlement" and transfered value to AUC successfully.
<b>Step2: ran KO88 with "Full settlemet".But getting the error "No transaction data posted since last settlement".</b>
Now Internal order any way has no value(as per message) but AUC has the value.
But under the same scenario original postings were successfull(i.e when ran "Full settlelemt"under KO88 even that time also value was not there in Internal order??)
Tested couple of settlelements with some other orders.It works for original settlements BUT 2ND STEP WILL NOT WORK WHEN WE TRY TO REPOST AFTER REVERSALS.
Can some please advise what is the reason for this?
In precise I want to reverse some settlements from Asset-AUC-Internal order and repost to same asset or other asset.
regards

Hi
Sorry, this problem got resolved.Only mistake I was doing was checking the box "check transaction data" -
hence the error.
When I removed that it worked fine.

I am uploading receipts using the PURCHASE_ORDER_RECEIPT EIP. When I upload serialized assets each one is processed as a separate receipt (receiver_id). How can I have these all aggregated on the same receipt?

I am uploading receipts using the PURCHASE_ORDER_RECEIPT EIP. When I upload serialized assets each one is processed as a separate receipt (receiver_id). How can I have these all aggregated on the same receipt?
Is there a parameter I should be using in the XML or is there a setting in Peoplesoft that will accomplish this?
Jim

sundy.liu wrote:
Unfortunately however, even with the TCP tweaks enabled, I still only get a little over 1 Gb/s through the two aggregated Gig ports. It seems as though the aggregation is only using one port, though MRTG graphs of the two switch ports do in fact show that they are both being utilized equally, essentially splitting the 1 Gb/s speed between
the two ports.
Problem with the server? switch? Aggregation software? All the above? At any rate, I seem to be missing something.. Any help regarding this issue would be greatly appreciated!If you're only running a single stream, that's all you'll see. Teaming/aggregating doesn't make one stream go faster.
If you ran two streams simultaneously, then you should see a difference between a single 1G interface and an aggregate of two 1G interfaces.
Darren

Automatic creation of AUC (CWIP Asset) at the time of creation of IO

Hello Gurus,
When iam creating an investment internal order, system is not creating AUC(CWIP Asset), I have created investment profile and entered the same in internal order, what could be the reason for this.
Please let me know the missing configuration.
Thanks & Regards,
Kapoor

Have you made the following settings:
Investment profile:
Sim. asset class xxxx
Indent value
OAYZ Determine Depreciation Areas in the Asset Class assigned the default value to the asset clas for AUC.
In the most cases the AUC is created when you release the internal order

Problem when upload legacy data

Hi all,
I've faced a problem when uploading asset legacy data (AS91) for customer. My customer have started depreciation on May 21, 2009, and I set transfer date is November 30, 2010. So SAP doesn't calculate right planned value for December, 2010. I think that problem related to the first month depreciation. It calculated full month for depreciation (instead of from May 21) and change the planned value for December 2010. So I want SAP just calculate 11 days depreciation for May 2009. How can I config to do this?
Thanks in advance!

Hi,
Check in the asset master Opening Start Date for depreciation.. If it is under open mode change that date and see asset explorer for depreciation values.
Thanks,
Padmaja

Nexus 1000V. problem when working with the console VMWare

I have a problem when working with the console VMWare.
Sometimes it is impossible to connect any of the hypervisor to the guest OS managed by them.
I get the message: "Unable connect to the MKS: Host address lookup for server <name of the hypervisor> failed: No such host is known."
This message always appears in conjunction with the reconfiguration of virtual switch: "Reconfigure vNetwork Distributed Switch .... Initiated by Cisco_Nexus_1000V_ ....."
Upon completion of the reconfiguration, Communication console, with guest OS is restored, or on its own or after a reboot srv-vc.
In this time, I do not see any message in Nexus 1000v log.
What is this?
Thanks in advance.

Smells of a DNS issue. Are you sure your ESX hosts are reachable from your client via DNS hostname? Try pinging them from a command prompt/terminal. You may have DNS server issues.
As a temp fix, edit your [windowspath]/system32/etc/drivers/hosts file and manually add the ESX host name and IP, then re-test.
Regards,
Robert

Problem when loading from ODS to the CUBE

Hi Experts,
I am facing an unusual problem when loading data from ODS to the cube.
I have a first level ODS where the delta postings are updated. I have checked the active table of the ODS and the data is accurate.
I have deleted the entire data from the Cube and trying to do a full load from ODS to the CUBE.
I am sure when I run a full load the data goes from Active table of the ODS.
After the full load the the keyfigure values are 0. I have tried doing the testing by loading couple of sales documents and still the keyfigure values are 0.
I wonder when I load the full. The data should be picked exactly the way it is in active table of the ODS.
I also dont have any fancy routines in the update rules.
Please help me in this regard.
Regards
Raghu

Hi,
Check the procedure did u do that exactly or not. just follow the the laymen steps here:... and let me know ur issue
o     First prepare a flat file in Microsoft excel sheet for master data and transaction data and save it in .CSV format and close it.
o     First select info objects option and create info area then create info object catalog then char, & key figure. Then create id in Char, Name as attribute activate it then in key figures create no and activate it.
o     In info sources create application component then create info source with direct update for master data and flexible update for transaction data. The flat files would be created for master data create info package and execute it.
o     For transaction data go to info provider then select the file right click on it then select option create ODS object. Then a new screen opens give the name of the ODS and create other screen opens then drag character to key fields.
o     Activate it then update rules it will give error to it then go to communication structure and give 0Record mode then activate it then go to update rules it will activate it.
o     Then go to info source then create info package then external data then processing update, Data targets then the scheduling then click start then the monitor.
o     Then other screen opens there we can see if we doesnt able to see the records then come back to the info provider right click on it then other screen opens then select the option activate data in ODS then a screen opens.
o     so select the option QM where it would be in a yellow co lour then by double click then another screen opens then select green color option then click continue it and it comes to the previous screen then select the option and click save it would be underneath of it just click it up and close it.
o     Then come back to the main screen to the info source to the info package go to the package and right click on it then a screen opens then click schedule without distributing any of the tab directly click the monitor tab. Then refresh it until the records come to the green.
o     Once it is green the click the data target and see the file executed.
o     Now go to the info provider then a right click on the file name then create info cube. Then a new screen opens and gives the name and activates it. The drag the key figures to the other side, time characteristics to the other side, and chacetristics to the other side.
o     Then create the dimension table then assign it and activate it .Then go to file name right click on it then select the option create update rules select ODS option and give the file name and activate it .
o     Then come back to the main screen and refresh it. Whenever you see 8 file names you will know that it is undergoing the data mart concept.
o     In the main screen click ODS file right click then a pop up screen opens select the option update ODS data target. Then another screen opens in that we are able to see 2 options full update, initial update then select initial update.
o     Then another screen opens info Package there the external data , data targets , scheduler select the option later in background option then a another screen opens just click immediate then click save automatically it closes then click start option.
o     Then select monitor option then the contents then the field to be elected then the file to be executed.
regards
ashwin

Without IM how can i settle construction project to AUC and asset

Dear all
without IM, how can i settle construction project to AUC and asset.
can someone explain it in details?
thanks a lot.
Judy

thanks for all of your answers.
i create the investment profile and assgin it to the project profile.
when i release the project, i see the system status changed from crtd to release and AUC.
when i do cj88, the costs are settled to the AUC No. automatically.
could you tell me how the AUC No. is created? where does it configure?
when AUC is settled to FXA, what are the procedures?
first TECO the project and then do CJ88, am I correct?
thanks a lot
Judy

Problem while distribute software via Java Web Start

Hi,
I use JWS to distribute my software to the clients. I use apache 2.2 as webserver.
My Problem:
When i put a update a jar on the webserver, the clients have to start JWS twice to get the new file.
First i thought it is a problem with the webserver. So i have restarted the apache after i�ve put the new jar. ... without success.
Are there any settings in JWS which take affect?
Any ideas?
Tom

The default behavior is to timeout if checking for an update takes too much time.
You can add the jnlp element:
<update check="always"/>
and updates will always happen on the forst launch (when client is using Java Web Start 1.6.0 or later, update element will be ignored by earlier versions)
see: http://java.sun.com/javase/6/docs/technotes/guides/javaws/developersguide/syntax.html#security
/Andy

Distributing Expenses on Assets

Hi Gurus,
I have a questions. I need to distribute expenses to all assets on FA book equally. Normally, ı enter an expense invoice from AP then enter lines(I can use distribution set for this,but ıf ı do that way,ı must update the distribution set when ı add a new asset) for each asset on FA then transfer it to AP then add them to assets manually on Mass Addition window. But it is taking so much time, I am trying to find an easier way to do this.
Our team can develop a program for this.But ı want to solve it with EBS functionality.
Our EBS version is 11.5.9
Any ideas?
Thank you for your help
Serkan Erginbilgiç

Hi Serkan,
Which process is time consuming or difficult for you ...?
If it is due to Mass addition process in Asset Module,
you can make use of the Web ADI functionality for creating assets directly in Oracle Assets Module, instead of going through Oracle payables ...All required details are entered in an ADI template (Excel Sheet) and uploaded to Oracle Assets...
If it is due to Data entry at Oracle Payables Module,
you should see whether invoices can be created by matching it to PO/Receipt for Assets and Expenses ...that way data entry at the Invoice creation screen is avoided, the accounts are auto populated from Purchase Order ...
Regards,
Ivruksha

I have an Epson printer on a Wifi network. Windows 7 desktop and and HP Win 7 laptop (my wifes) print to it just fine. My MacBook Pro running Yosemite won't detect it, and I have the latest driver installed. No problem when I had a Canon...

I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions? Please??? :-)

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

How do I stop Firefox from creating untitled web pages when I try to send email from a web page. The only way I have found is to turn the computor off and then reboot. I don't have this problem when using Internet Explorer

Every time I click on a web site that has an email option the browser starts making untitled web pages and never stops unless I turn the computer off. It is very frustrating to not be able to use an email option when offered by a web site. The only way I can send email messages on the Firefox browser is to go into my hotmail acct. and copy and paste the addresses. I don't have this problem when I use the Internet Explorer browser.

See [[Firefox keeps opening many tabs or windows]]

Firefox gets problems when 2,7 GB of memory is used by Firefox

Firefox gets problems when 2,7 GB of memory is used by Firefox. Or more. Like 2,8 GB.
It started when I read jpost.com with tens of tabs open. I don't remember how many. But I know there was more than 40.
On the tab I that I was reading, the page turned completely black. Pitch black with nothing else, not even the Firefox interface. It was actually a pitch black shape that looked like a web page in shape. The blackness quickly disappeared and the page was normally readable again. But then it happened again - the page turned black again.
The same page turns black happened again later.
One of my browsing sessions had Firefox slow down so much that you could see scrolling happening when I used scrolling.
Still another time I had 60 tabs open and Firefox worked completely fine without freezes, slowdowns, or black shapes. I could close Firefox by just pressing the red X in the title bar.
Yesterday, I had 50 tabs open and I experienced a slowdown when I looked at the Breaking News headlines. The headlines would show slower than usual. The Breaking News headlines at jpost.com show the headlines a few words at a time until the headline is completely shown. Then the headline disappears and the next starts showing a few words at a time. And speed in general was not what you normally have with a computer that has 8 GB of memory. And a Core i5 processor. I opened two more tabs from the Breaking News section I had opened. After I opened a new window, Firefox froze. I had to close Firefox from the Task Manager by pressing End process. I had used Firefox for 6 hours without ever closing any of the tabs I had opened.
In all of these cases, more than 40 tabs were open. In all of these cases, the slow down or freeze meant I had to use Task Manager and then press End process on the Processes tab. In all cases except the two I describe in the next paragraph, I never close any tabs after opening them. No problems have ever happened until Firefox started using 2,7 GB of memory. Until that point, everything is normal with no freezes or slowdowns.
At two times, I tried to reduce memory usage by closing tabs. However, in both cases this would make Firefox freeze. In one of these cases, Firefox would show something bizarre: there would be about 7 tabs, and one of the tabs would be partly shown. Also, Firefox would show the busy cursor. Firefox did not show how many tabs I actually had. The second time, I tried to close the tabs by clicking Close other tabs in the menu that you get when right-click a tab. The tabs would close fine, but I remember that I opened Gmail and then I did this: I clicked on the Promotions tab. Instead of seeing the tab with the Emails, Firefox showed a busy cursor and the title bar said not responding. Firefox froze.
The reason might be Adblock Plus memory usage. In Adblock Plus home page, developer Wladimir Palant writes in his blog about how Adblock Plus uses a lot of memory: https://adblockplus.org/blog/on-the-adblock-plus-memory-consumption .

One more bit of information: I have a Geforce 640 GT graphics card. My graphics card drivers are old- version 311.41. The newest version of the drivers is 340.52. Would a new graphics card driver solve the problem?

Problems when distributing AUC to asset

Similar Messages

Maybe you are looking for