Problems when I eliminate the files in ucm
Hi, good morning.
When I eliminate a file of ucm the URL of the file does not disappear, if I realise a content search remains the URL of the file although this already she has been eliminated, as I can avoid this.
Hello.
Yes, I am waiting for the indexer cycle, the URL is the Link that adds ucm to be able to visualize the file as well as its information, I eliminate the content and this if it is eliminated but URL follows there, if I give click in sends a message to me that says the action cannot be realised so that is not the file.
Similar Messages
-
Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?
Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt -
I've had MS Office:mac 2011 on my imac for around 18 months now. Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it. I've just done this using the installation disc which, then said the installation had been successful.
Outlook is still not working. Can anyone please advise me on what to do next.Remove MS Office 2011 completely (here are instructions) and reinstall it.
It's not a simple or fast process but it is important to follow all of the steps in order to get all the files that Office scatters around. This will not affect your data files, only MS Office and its preferences. -
i have some stuff i want to put on external hard drive when i drag the file or files it just puts them back
Did you format the external disk on Windows? If you did this, probably the external disk is formatted in NTFS. OS X can't write on this format, so it's normal that it doesn't allow you to copy the files.
In this case, you have three possibilities:
1. Install Paragon NTFS. This program allows you to write on NTFS partitions.
2. Copy the hard drive content to your internal disk and format the external disk with Mac OS Extended (Journaled). Do it only if you are going to use the external disk only with OS X.
3. The same as the last one but formatting it with exFAT. This filesystem is compatible with Windows (XP, Vista, 7, 8) and OS X (10.6.5 and newer), so you can write and read files on external disks formatted with it on Windows and OS X, but you may have problems on Linux -
Hi, I am trying to convert my resume on pages to a word document. When i export the file to to make it a word document ie(resume.doc) it messes up my whole resume on websites and pulls up a bunch of random words. Please help!
What exactly is the problem?
Your description is so muddled I am having trouble working it out.
How does your exported .doc file mess up websites? In fact what does it have to do with websites?
Where, how and what are the random words turning up?
Peter -
There is a problem when i click the "+" tab to "open a new tab" nothing happens. It use to open new tabs and now it does nothing. Even when i go to "File" and "New Tab" it still does nothing. The only time i can get a new tab to open is if i go to "Help" and click "Firefox Help" then a new tab with firefox help opens.
Hi, were you able to resolve your problem? If so, please mark this question as '''Solved'''. Thanks !
-
Nexus 1000V. problem when working with the console VMWare
I have a problem when working with the console VMWare.
Sometimes it is impossible to connect any of the hypervisor to the guest OS managed by them.
I get the message: "Unable connect to the MKS: Host address lookup for server <name of the hypervisor> failed: No such host is known."
This message always appears in conjunction with the reconfiguration of virtual switch: "Reconfigure vNetwork Distributed Switch .... Initiated by Cisco_Nexus_1000V_ ....."
Upon completion of the reconfiguration, Communication console, with guest OS is restored, or on its own or after a reboot srv-vc.
In this time, I do not see any message in Nexus 1000v log.
What is this?
Thanks in advance.Smells of a DNS issue. Are you sure your ESX hosts are reachable from your client via DNS hostname? Try pinging them from a command prompt/terminal. You may have DNS server issues.
As a temp fix, edit your [windowspath]/system32/etc/drivers/hosts file and manually add the ESX host name and IP, then re-test.
Regards,
Robert -
Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks.
laciOption 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Images of gallery doesn't load when I upload the files on server
The gallery works fine when the files is on my computer but when I upload the files on my server the images doesn't load.
I'm using xml file to load the images. Here is the code of the gallery:
function loadPlayList(url:String) {
delete myMO.onMouseWheel;
delete myKO.onKeyDown;
for (var i in infostruc) {
root["_ref"+i] = root["_bmd"+i]=false;
loadedAll = false;
infostruc = [];
for (var i in root) {
if ((root[i]._name.substr(0, 3) == "art" || root[i]._name.substr(0, 10) == "reflection") && (parseInt(root[i]._name.split("art")[1]) || parseInt(root[i]._name.split("reflection")[1]))) {
root[i].swapDepths(root.getNextHighestDepth());
root[i].removeMovieClip();
current = 1;
root.createEmptyMovieClip("loader", root.getNextHighestDepth());
xmlData.load(url);
function init(Void):Void {
myMO = {};
myKO = {};
Mouse.addListener(myMO);
Key.addListener(myKO);
for (var i in infostruc) {
loader.clear();
loader.gradient_mc.removeMovieClip();
loader.attachMovie("default", "art", 1);
root["_shelveCDWidth"+i] = shelveCDWidth;
root["_shelveCDHeight"+i] = shelveCDHeight;
root["_frontCDWidth"+i] = frontCDWidth;
root["_frontCDHeight"+i] = frontCDHeight;
this["_bmd"+i] = new BitmapData(loader._width, loader._height);
this["_ref"+i] = new BitmapData(loader._width, loader._height);
this["_bmd"+i].draw(loader);
var mc:MovieClip = loader.createEmptyMovieClip("gradient_mc", loader.getNextHighestDepth());
matrix = new Matrix();
matrix.createGradientBox(loader._width, loader._height, reflectionRotation/180*Math.PI, 0, 0);
mc.beginGradientFill(reflectionFillType, reflectionColors, reflectionAlphas, reflectionRatios, matrix, reflectionSpreadMethod, reflectionInterpolationMethod, reflectionFocalPointRatio);
mc.moveTo(0, 0);
mc.lineTo(0, loader._height);
mc.lineTo(loader._width, loader._height);
mc.lineTo(loader._width, 0);
mc.lineTo(0, 0);
mc.endFill();
loader.art._alpha = reflectionAlpha;
loader.beginFill(reflectionBackgroundColour);
loader.moveTo(0, 0);
loader.lineTo(0, loader._height);
loader.lineTo(loader._width, loader._height);
loader.lineTo(loader._width, 0);
loader.lineTo(0, 0);
loader.endFill();
this["_ref"+i].draw(loader);
for (var i:Number = count=0; count<stageWidth-(centerDistance*3); count += shelveCDSpacing, i++) {
var cArt:MovieClip = this.createEmptyMovieClip("art"+this.getNextHighestDepth(), this.getNextHighestDepth());
var rArt:MovieClip = this.createEmptyMovieClip("reflection"+(this.getNextHighestDepth()-1), this.getNextHighestDepth());
rArt.id = cArt.id=rArt.cid=cArt.cid=Number(i)+1;
rArt._x = cArt._x=stageWidth;
cArt.DistortImage(this["_bmd"+cArt.id]);
controlTheObject(cArt);
rArt.DistortImage(this["_ref"+cArt.id]);
controlTheObject(rArt);
var tmpFilter:BlurFilter = new BlurFilter(reflectionBlurX, reflectionBlurY, reflectionQuality);
rArt.filterArray = cArt.filterArray=[];
rArt.filterArray[0] = tmpFilter;
rArt.filters = rArt.filterArray;
tmask = mask.duplicateMovieClip("_mask"+cArt.id, this.getNextHighestDepth(), {_x:mask._x, _y:mask._y});
rmask = mask.duplicateMovieClip("_rmask"+cArt.id, this.getNextHighestDepth(), {_x:mask._x, _y:mask._y});
cArt.setMask(tmask);
rArt.setMask(rmask);
rArt._visible = cArt._visible=false;
myMO.onMouseWheel = function(delta:Number):Void {
if (delta>0) {
next();
} else if (delta<=0) {
previous();
myKO.onKeyDown = function():Void {
if (Selection.getFocus() != "_level0.goto") {
if (Key.isDown(Key.RIGHT)) {
next();
} else if (Key.isDown(Key.LEFT)) {
previous();
scrollBar.scroller.onPress = function():Void {
dist = this._parent._xmouse-this._x;
this.onMouseMove = function():Void {
tmp = 1+Math.ceil(((this._parent._xmouse-dist)-scrollBarStart)/(scrollBar._width-scrollBarStop)*(infostruc.length-1));
if (tmp>infostruc.length) {
tmp = infostruc.length;
if (tmp<1) {
tmp = 1;
current = tmp;
updateInfo();
scrollBar.scroller.onRelease = scrollBar.scroller.onReleaseOutside=function ():Void {
stopDrag();
delete this.onMouseMove;
scrollBar.left.onPress = function():Void {
previous();
shifter = setInterval(previous, scrollerDelay);
scrollBar.right.onPress = function():Void {
next();
shifter = setInterval(next, scrollerDelay);
scrollBar.onMouseUp = function():Void {
clearInterval(shifter);
scrollBar.onMouseDown = function():Void {
if (this.hitTest(_xmouse, _ymouse, true) && !this.left.hitTest(_xmouse, _ymouse, true) && !this.right.hitTest(_xmouse, _ymouse, true)) {
if (this._xmouse<this.scroller._x) {
previous();
shifter = setInterval(previous, clickDelay);
if (this._xmouse>this.scroller._x+this.scroller._width) {
next();
shifter = setInterval(next, clickDelay);
goto.restrict = "0-9";
goto.onKillFocus = function():Void {
if (!isNaN(Number(this.text)+1)) {
if (this.text>infostruc.length) {
this.text = infostruc.length;
if (this.text<1) {
this.text = 1;
current = Number(this.text);
} else {
this.text = current;
updateInfo();
fscreen.onPress = function():Void {
fscommand("fullscreen", !(this._currentframe-1));
this.gotoAndStop(!(this._currentframe-1)+1);
slideShow.onPress = function():Void {
if (this._currentframe == 1) {
sliderShow = setInterval(function ():Void {
if (current<infostruc.length) {
next();
} else if (slideshowLooping) {
current = 0;
next();
}, slideshowSpeed);
} else {
clearInterval(sliderShow);
this.gotoAndStop(!(this._currentframe-1)+1);
distance = Number(i);
mask.removeMovieClip();
fscreen.swapDepths(1102);
slideShow.swapDepths(1103);
scrollBar.swapDepths(1101);
i2.swapDepths(1105);
i1.swapDepths(1106);
loader.removeMovieClip();
loadNext();
updateInfo();
function concat(m1, m2):Object {
var mat:Object = {};
mat.a = m1.c*m2.b;
mat.b = m1.d*m2.b;
mat.c = m1.a*m2.c;
mat.d = m1.b*m2.c;
mat.tx = m1.a*m2.tx+m1.c*m2.ty+m1.tx;
mat.ty = m1.b*m2.tx+m1.d*m2.ty+m1.ty;
return mat;
function updateInfo():Void {
goto.text = current;
info = infostruc[current-1].info;
author = infostruc[current-1].auth;
album = infostruc[current-1].album;
displayAlternArt(root["_bmd"+(current-1)], artDisplay._width, artDisplay._height);
scrollBar.scroller._x = scrollBarStart+((current-1)/(infostruc.length-1)*(scrollBar._width-scrollBarStop));
function brightness(_prop:String, _old:Number, _new:Number, target:MovieClip):Void {
var brightness_array:Array = [1, 0, 0, 0, _new, 0, 1, 0, 0, _new, 0, 0, 1, 0, _new, 0, 0, 0, 1, 0];
target.filterArray[1] = new ColorMatrixFilter(brightness_array);
target.filters = target.filterArray;
function controlTheObject(mc):Void {
if (mc._name.indexOf("reflection") == -1) {
mc.onPress = function():Void {
if ((getTimer()-this.pressTime<=doubleClickRegister && this.pressTime) || !doubleClickURL) {
if (infostruc[this.cid].urlToGet) {
getURL(infostruc[this.cid].urlToGet, "_"+infostruc[this.cid].urlAction);
this.pressTime = getTimer();
current = this.cid+1;
updateInfo();
mc.watch("_brightness", brightness, mc);
mc.onEnterFrame = function():Void {
this._visible = true;
if (infostruc[this.cid].loaded && !this.loadedImage) {
this.allowUpdate = true;
this.DistortImage(this._name.indexOf("reflection")>-1 ? this._parent["_ref"+this.cid] : this._parent["_bmd"+this.cid]);
this.setTransform(this.px1, this.py1, this.px2, this.py2, this.px3, this.py3, this.px4, this.py4);
this.loadedImage = true;
if (Math.round(Math.abs(this._x-this.x))>=1 || this.allowUpdate) {
if (this._name.indexOf("reflection") == -1) {
this._y = centerY+((shelveCDHeight/2)-(this._parent["_shelveCDHeight"+this.cid]/2));
if (this._x>=centerX+centerDistance) {
this.swapDepths(-this._x);
this.setSides(-(this._parent["_shelveCDWidth"+this.cid]/2), -(this._parent["_shelveCDHeight"+this.cid]/2)+((Math.sin(angle*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), this._parent["_shelveCDWidth"+this.cid]/2, -(this._parent["_shelveCDHeight"+this.cid]/2), this._parent["_shelveCDWidth"+this.cid]/2, this._parent["_shelveCDHeight"+this.cid]/2, -(this._parent["_shelveCDWidth"+this.cid]/2), (this._parent["_shelveCDHeight"+this.cid]/2)-((Math.sin(angle*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])));
} else if (this._x<=centerX-centerDistance) {
this.swapDepths(this._x);
this.setSides(-(this._parent["_shelveCDWidth"+this.cid]/2), -(this._parent["_shelveCDHeight"+this.cid]/2), this._parent["_shelveCDWidth"+this.cid]/2, -(this._parent["_shelveCDHeight"+this.cid]/2)+(Math.sin(angle*Math.PI/180)*this._parent["_frontCDWidth"+this.cid]), this._parent["_shelveCDWidth"+this.cid]/2, (this._parent["_shelveCDHeight"+this.cid]/2)-(Math.sin(angle*Math.PI/180)*this._parent["_frontCDWidth"+this.cid]), -(this._parent["_shelveCDWidth"+this.cid]/2), this._parent["_shelveCDHeight"+this.cid]/2);
} else if (this.cid == current-1 || this.cid == current || this.cid == current-2) {
if (this._x>centerX-centerDistance && Math.floor(this._x)<centerX && angle-((this._x-(centerX-centerDistance))/centerDistance*angle)>autoJump) {
this.swapDepths(1002);
var sum:Number = this._parent["_shelveCDWidth"+this.cid]+((this._x-(centerX-centerDistance))/centerDistance*(this._parent["_frontCDWidth"+this.cid]-this._parent["_shelveCDWidth"+this.cid]));
var sum2:Number = angle-((this._x-(centerX-centerDistance))/centerDistance*angle);
var sum3:Number = this._parent["_shelveCDHeight"+this.cid]+((this._x-(centerX-centerDistance))/centerDistance*(this._parent["_frontCDHeight"+this.cid]-this._parent["_shelveCDHeight"+this.cid]));
this.setSides(-(sum/2), -(sum3/2), sum/2, -(sum3/2)+((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), sum/2, (sum3/2)-((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), -(sum/2), sum3/2);
} else if (this._x<centerX+centerDistance && Math.ceil(this._x)>centerX && angle-(((centerX+centerDistance)-this._x)/centerDistance*angle)>autoJump) {
this.swapDepths(1003);
var sum:Number = this._parent["_shelveCDWidth"+this.cid]+(((centerX+centerDistance)-this._x)/centerDistance*(this._parent["_frontCDWidth"+this.cid]-this._parent["_shelveCDWidth"+this.cid]));
var sum2:Number = angle-(((centerX+centerDistance)-this._x)/centerDistance*angle);
var sum3:Number = this._parent["_shelveCDHeight"+this.cid]+(((centerX+centerDistance)-this._x)/centerDistance*(this._parent["_frontCDHeight"+this.cid]-this._parent["_shelveCDHeight"+this.cid]));
this.setSides(-(sum/2), -(sum3/2)+((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), sum/2, -(sum3/2), sum/2, sum3/2, -(sum/2), (sum3/2)-((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])));
} else {
this.swapDepths(1004);
this.setSides(-(this._parent["_frontCDWidth"+this.cid]/2), -(this._parent["_frontCDHeight"+this.cid]/2), this._parent["_frontCDWidth"+this.cid]/2, -(this._parent["_frontCDHeight"+this.cid]/2), this._parent["_frontCDWidth"+this.cid]/2, this._parent["_frontCDHeight"+this.cid]/2, -(this._parent["_frontCDWidth"+this.cid]/2), this._parent["_frontCDHeight"+this.cid]/2);
} else {
if (this._x>centerX-centerDistance && Math.floor(this._x)<centerX && angle-((this._x-(centerX-centerDistance))/centerDistance*angle)>autoJump) {
this.swapDepths(1002);
var sum2:Number = angle-((this._x-(centerX-centerDistance))/centerDistance*angle);
this.setSides(-(this._parent["_shelveCDWidth"+this.cid]/2), -(this._parent["_shelveCDHeight"+this.cid]/2), this._parent["_shelveCDWidth"+this.cid]/2, -(this._parent["_shelveCDHeight"+this.cid]/2)+((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), this._parent["_shelveCDWidth"+this.cid]/2, (this._parent["_shelveCDHeight"+this.cid]/2)-((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), -(this._parent["_shelveCDWidth"+this.cid]/2), this._parent["_shelveCDHeight"+this.cid]/2);
} else if (this._x<centerX+centerDistance && Math.ceil(this._x)>centerX && angle-(((centerX+centerDistance)-this._x)/centerDistance*angle)>autoJump) {
this.swapDepths(1003);
var sum2:Number = angle-(((centerX+centerDistance)-this._x)/centerDistance*angle);
this.setSides(-(this._parent["_shelveCDWidth"+this.cid]/2), -(this._parent["_shelveCDHeight"+this.cid]/2)+((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), this._parent["_shelveCDWidth"+this.cid]/2, -(this._parent["_shelveCDHeight"+this.cid]/2), this._parent["_shelveCDWidth"+this.cid]/2, this._parent["_shelveCDHeight"+this.cid]/2, -(this._parent["_shelveCDWidth"+this.cid]/2), (this._parent["_shelveCDHeight"+this.cid]/2)-((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])));
} else {
this._yscale = -100;
this._y = centerY+((shelveCDHeight/2)-(this._parent["_shelveCDHeight"+this.cid]/2))+this._parent["_shelveCDHeight"+this.cid]+reflectionSpace;
if (this._x>=centerX+centerDistance) {
this.swapDepths(-this._x-333);
this.setSides(-(this._parent["_shelveCDWidth"+this.cid]/2), -(this._parent["_shelveCDHeight"+this.cid]/2)+(Math.sin(angle*Math.PI/180)*this._parent["_frontCDWidth"+this.cid]), -(this._parent["_shelveCDWidth"+this.cid]/2)+this._parent["_shelveCDWidth"+this.cid], -(this._parent["_shelveCDHeight"+this.cid]/2), -(this._parent["_shelveCDWidth"+this.cid]/2)+this._parent["_shelveCDWidth"+this.cid], this._parent["_shelveCDHeight"+this.cid]/2, -(this._parent["_shelveCDWidth"+this.cid]/2), (this._parent["_shelveCDHeight"+this.cid]/2)+((Math.sin(angle*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])));
} else if (this._x<=centerX-centerDistance) {
this.swapDepths(this._x-333);
this.setSides(-(this._parent["_shelveCDWidth"+this.cid]/2), -(this._parent["_shelveCDHeight"+this.cid]/2), -(this._parent["_shelveCDWidth"+this.cid]/2)+this._parent["_shelveCDWidth"+this.cid], -(this._parent["_shelveCDHeight"+this.cid]/2)+((Math.sin(angle*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), -(this._parent["_shelveCDWidth"+this.cid]/2)+this._parent["_shelveCDWidth"+this.cid], (this._parent["_shelveCDHeight"+this.cid]/2)+(Math.sin(angle*Math.PI/180)*this._parent["_frontCDWidth"+this.cid]), -(this._parent["_shelveCDWidth"+this.cid]/2), this._parent["_shelveCDHeight"+this.cid]/2);
} else if (this.cid == current-1 || this.cid == current || this.cid == current-2) {
if (this._x>centerX-centerDistance && this._x<centerX && !validateOk(this)) {
this.swapDepths(999);
var sum:Number = this._parent["_shelveCDWidth"+this.cid]+((this._x-(centerX-centerDistance))/centerDistance*(this._parent["_frontCDWidth"+this.cid]-this._parent["_shelveCDWidth"+this.cid]));
var sum2:Number = angle-((this._x-(centerX-centerDistance))/centerDistance*angle);
var sum3:Number = this._parent["_shelveCDHeight"+this.cid]+((shelveCDHeight/2)-(this._parent["_shelveCDHeight"+this.cid]/2))+((this._x-(centerX-centerDistance))/centerDistance*(this._parent["_frontCDHeight"+this.cid]-this._parent["_shelveCDHeight"+this.cid]));
this._y = centerY+sum3+reflectionSpace;
this.setSides(-(sum/2), -(sum3/2), sum/2, -(sum3/2)+((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), sum/2, (sum3/2)+((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), -(sum/2), sum3/2);
} else if (this._x<centerX+centerDistance && this._x>centerX && !validateOk(this)) {
this.swapDepths(998);
var sum:Number = this._parent["_shelveCDWidth"+this.cid]+(((centerX+centerDistance)-this._x)/centerDistance*(this._parent["_frontCDWidth"+this.cid]-this._parent["_shelveCDWidth"+this.cid]));
var sum2:Number = angle-(((centerX+centerDistance)-this._x)/centerDistance*angle);
var sum3:Number = this._parent["_shelveCDHeight"+this.cid]+((shelveCDHeight/2)-(this._parent["_shelveCDHeight"+this.cid]/2))+(((centerX+centerDistance)-this._x)/centerDistance*(this._parent["_frontCDHeight"+this.cid]-this._parent["_shelveCDHeight"+this.cid]));
this.setSides(-(sum/2), -(sum3/2)+((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), sum/2, -(sum3/2), sum/2, sum3/2, -(sum/2), (sum3/2)+((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])));
this._y = centerY+sum3+reflectionSpace;
} else if (!validateOk(this)) {
this.swapDepths(995);
this._y = centerY+((shelveCDHeight/2)-(this._parent["_shelveCDHeight"+this.cid]/2))+this._parent["_frontCDHeight"+this.cid]+reflectionSpace;
this.setSides(-(this._parent["_frontCDWidth"+this.cid]/2), -(this._parent["_frontCDHeight"+this.cid]/2), this._parent["_frontCDWidth"+this.cid]/2, -(this._parent["_frontCDHeight"+this.cid]/2), this._parent["_frontCDWidth"+this.cid]/2, this._parent["_frontCDHeight"+this.cid]/2, -(this._parent["_frontCDWidth"+this.cid]/2), this._parent["_frontCDHeight"+this.cid]/2);
this.allowUpdate = false;
this._x -= Math.min(Math.max((this._x-this.x)/albumEase, -maxSlide), maxSlide);
this.setTransform(this.px1, this.py1, this.px2, this.py2, this.px3, this.py3, this.px4, this.py4);
if (this._x<deleteMinDistance && this._parent["_ref"+(this.cid+distance)]) {
this.cid += distance;
this._x = deleteMaxDistance;
controlTheObject(this);
this._visible = false;
this.loadedImage = infostruc[this.cid].loaded;
this.DistortImage(this._name.indexOf("reflection")>-1 ? this._parent["_ref"+this.cid] : this._parent["_bmd"+this.cid]);
if (this._x>deleteMaxDistance && this._parent["_ref"+(this.cid-distance)]) {
this.cid -= distance;
this._x = deleteMinDistance;
controlTheObject(this);
this._visible = false;
this.loadedImage = infostruc[this.cid].loaded;
this.DistortImage(this._name.indexOf("reflection")>-1 ? this._parent["_ref"+this.cid] : this._parent["_bmd"+this.cid]);
} else if (Math.ceil(Math.abs(this._x-this.x)) == 0) {
this._x = this.x;
if (this.cid+1>current) {
this.x = (centerX+((this.cid+1-current)*shelveCDSpacing))+centerDistance;
} else if (this.cid+1<current) {
this.x = (centerX+((this.cid+1-current)*shelveCDSpacing))-centerDistance;
} else {
this.x = centerX+((this.cid+1-current)*shelveCDSpacing);
if (fadeType == "brightness") {
if (this._x<fadePointMin+fadeDist) {
this._brightness = -(250-((this._x-fadePointMin)/fadeDist*250));
} else if (this._x>fadePointMax-fadeDist) {
this._brightness = -(250-((fadePointMax-this._x)/fadeDist*250));
} else {
this._brightness = 0;
} else if (fadeType == "alpha") {
if (this._x<fadePointMin+fadeDist) {
this._alpha = ((this._x-fadePointMin)/fadeDist*100);
} else if (this._x>fadePointMax-fadeDist) {
this._alpha = ((fadePointMax-this._x)/fadeDist*100);
} else {
this._alpha = 100;
function next():Void {
if (current<infostruc.length) {
current += 1;
updateInfo();
function previous():Void {
if (current>1) {
current -= 1;
updateInfo();
function displayAlternArt(art, width:Number, height:Number):Void {
artDisplay.attachBitmap(art, 1);
artDisplay._width = width;
artDisplay._height = height;
function loadNext():Void {
if (!loadedAll) {
var num:Number = current-1;
if (infostruc[current-1].loaded) {
var num:Number = current-Math.floor(distance/2)-1>=0 ? current-Math.floor(distance/2)-1 : 0;
while (infostruc[num].loaded && num<infostruc.length) {
num++;
if (num>=infostruc.length) {
var num:Number = current-1;
while (infostruc[num].loaded && num>0) {
num--;
if (num<=0) {
loadedAll = true;
var newLoad:MovieClip = this.createEmptyMovieClip("artLoad"+num, this.getNextHighestDepth());
newLoad.createEmptyMovieClip("art", newLoad.getNextHighestDepth());
newLoad._alpha = 0;
var mc:Object = {};
mc.number = num;
var artLoader:MovieClipLoader = new MovieClipLoader();
artLoader.addListener(mc);
artLoader.loadClip(infostruc[num].httpType+infostruc[num].art, newLoad.art);
mc.onLoadError = function() {
infostruc[this.number].loaded = true;
loadNext();
mc.onLoadInit = function(target:MovieClip) {
tw = target._width;
ty = target._height;
if (_CDProportions == "auto") {
if (target._width>target._height) {
target._width = Math.min(frontCDWidth, target._width);
target._yscale = target._xscale;
} else {
target._height = Math.min(frontCDHeight, target._height);
target._xscale = target._yscale;
root["_frontCDWidth"+this.number] = Math.min(frontCDWidth, target._width);
root["_frontCDHeight"+this.number] = Math.min(frontCDHeight, target._height);
target._width = tw;
target._height = ty;
root["_bmd"+this.number] = new BitmapData(target._width, target._height);
root["_ref"+this.number] = new BitmapData(target._width, target._height);
root["_bmd"+this.number].draw(target);
var mc:MovieClip = target._parent.createEmptyMovieClip("gradient_mc", target._parent.getNextHighestDepth());
matrix = new Matrix();
matrix.createGradientBox(target._width, target._height, reflectionRotation/180*Math.PI, 0, 0);
mc.beginGradientFill(reflectionFillType, reflectionColors, reflectionAlphas, reflectionRatios, matrix, reflectionSpreadMethod, reflectionInterpolationMethod, reflectionFocalPointRatio);
mc.moveTo(0, 0);
mc.lineTo(0, target._height);
mc.lineTo(target._width, target._height);
mc.lineTo(target._width, 0);
mc.lineTo(0, 0);
mc.endFill();
target._parent.beginFill(reflectionBackgroundColour);
target._parent.moveTo(0, 0);
target._parent.lineTo(0, target._height);
target._parent.lineTo(target._width, target._height);
target._parent.lineTo(target._width, 0);
target._parent.lineTo(0, 0);
target._parent.endFill();
target._alpha = reflectionAlpha;
root["_ref"+this.number].draw(target._parent);
infostruc[this.number].loaded = true;
if (_CDProportions == "auto") {
if (target._width>target._height) {
target._width = Math.min(shelveCDWidth, target._width);
target._yscale = target._xscale;
} else {
target._height = Math.min(shelveCDHeight, target._height);
target._xscale = target._yscale;
root["_shelveCDWidth"+this.number] = Math.min(shelveCDWidth, target._width);
root["_shelveCDHeight"+this.number] = Math.min(shelveCDHeight, target._height);
target._parent.removeMovieClip();
updateInfo();
loadNext();
xmlData.onLoad = function(success:Boolean):Void {
if (success) {
for (var i:Number = -1; this.childNodes[0].childNodes[++i]; ) {
var cNode:XMLNode = this.childNodes[0].childNodes[i].childNodes;
var val1:String = cNode[1].childNodes[0].nodeValue ? unescape(cNode[1].childNodes[0].nodeValue) : unknownSong;
var val2:String = cNode[2].childNodes[0].nodeValue ? unescape(cNode[2].childNodes[0].nodeValue) : unknownArtist;
var val3:String = cNode[3].childNodes[0].nodeValue ? unescape(cNode[3].childNodes[0].nodeValue) : unknownAlbum;
var val4:String = cNode[4].childNodes[0].nodeValue ? unescape(cNode[4].childNodes[0].nodeValue) : "./";
var val5:String = cNode[5].childNodes[0].nodeValue ? unescape(cNode[5].childNodes[0].nodeValue) : undefined;
var val6:String = cNode[6].childNodes[0].nodeValue ? unescape(cNode[6].childNodes[0].nodeValue) : undefined;
infostruc.push({art:cNode[0].childNodes[0].nodeValue, info:val1, auth:val2, album:val3, httpType:val4, urlToGet:val5, urlAction:val6, loaded:false});
root["_frontCDWidth"+i] = frontCDWidth;
root["_frontCDHeight"+i] = frontCDHeight;
root["_shelveCDWidth"+i] = shelveCDWidth;
root["_shelveCDHeight"+i] = shelveCDHeight;
init();
loadStat = "";
} else {
loadStat = "There was an error loading that data, sorry.";
xmlData.ignoreWhite = true;
loadPlayList("./albuminfo9.xml");
loader._visible = false;
mask._alpha = 0;
scrollBar.scroller._y = 0;This won't work on most servers: "./albuminfo9.xml". It should be "../albuminfo9.xml". That may or may not solve the problem. Be sure that all of your files and folders are in the same relative location on the server as they are on your computer. Also be sure that the case for each referenced item is correct. Upper and lower case are sometimes more important on a server than they are on your computer. JPG is not the same as jpg. Be sure that your files are uploading correctly.
-
I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated
Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail -
I use the Microsoft Outlook Web App for work email. I receive files with a .RXML extension. This has always worked just fine until the latest version of Firefox came out (I was using FF 7 until this weekend). Now FF changes the extension to .ashx when I open the file and I cannot download it into my software. If I go to the company internet site and download directly from there, it does the same thing. But I can open these files just fine from IE. I REALLY don't want to have to go back to IE.
I opened one of the PDF files in notepad and these are the first couple lines:
瀖ᕁމጿ␠씴豈䧉筩롈ꓳ劏ꎯ僪뚢頟뻏즏谀㿃夑퀉鲲쮂⫉笿褡밤籞冁탁ӓ轸뿐笼ⵆ횰䄌ඁ淥ة寨闤⬅鳦팥링빨嬄敎უ婏㣴ً鮓ࣿꢚ㑀녲莒ိȆ䕇纍쉉籶뺝갞伐쮠᥏넉釖ȓ겴☧ ἣ秵駻�䣞띰㖔流羀籔朼敨ꢉ糶당⬤俉膇䄐惡�ಹꛖ鍡恡ⱶᶜ�堷﹑ﱌ僿걄뎔æ䋷귪⛢⫐䅪䉙烶ꖆ႟ᗔ瘞狻틫儩六잶覱낵듘盋崾�ᦜ㺆௹뻹燴ឋ騙쬄ꏿ뽒煹�钼뇲腎稦ꃲ㈃沒ꔈ뺐뛽첑䘶畱䍣紻 ⁜哠鳾 -
I have a new Sony alpha 77ii. My PS version is 5.0. When I open the files with Bridge they are .ARW files. How do I convert them to JPEG's or something I can view and edit?
You can use Adobe's free DNG converter to convert proprietary raws to the universal DNG raw format. Here are the links:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 9.0
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 9.0
Converting to JPEG will be an extra step afterwards.
Benjamin -
I'm trying to mix a recording in the latest 2014 version of Garageband, but when I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting? Does anyone know why it changes even after saving the file?
Below is my iMac settings.Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store -
A pdf file is created from a word document and then posted to our dealer portal. It allows the dealer to open the pdf file and then either print and/or save off to a hard drive. The issue is the file name has + signs in between all the words. Is there a way to eliminate the file names coming up with the plus signs? It is not being saved that way. Any help you can provide would be appreciated.
Use a proper file name for the WORD document. MS decided several years ago to allow spaces, but that is not standard and is likely what the issue is. A good alternative is to replace spaces in file names with underbars, "_".
-
I bought acrobat adobe professtional version II in 2012. Now I re-download this software to my new computer. All info was downloaded. But when I opened the file, I need to verify the serial number. I entered. But it showed up that the serial number is valid, but the qualifying product could not be found. I could not be able to find Ver 11 from the list. What can I do?
The qualifying product is the older version that you owned before you purchased the upgrade to version. It is what qualifies you to use the less expensive upgrade version. So you need to select the older version and provide its serial number to prove that you qualify for using the upgrade.
Error "This serial number is not for a qualifying product" | CS6, CS5.5, CS5
http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html
Maybe you are looking for
-
Showing error while creating IT0000 ee record
Hi, I am new to HR functional. Please do need full. When i am creating record in infotype 0000, it is showing error like No entry in table T503 for 779. I am giving value 7 fro employee group and 79 for employee subgroup. Is there any where that
-
I have a new iMac and MacBook Pro with Retina Display running 10.8.2 When I use Disk Utility on a San Disk 2GB SD card I can only format as FAT16. How can I format the card as FAT32?
-
My program is compiling correctly with out any errors. when i try to run it this error occurred : java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement. at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unk
-
Experts, If I want to exlude / influence the material status (blocked for purchasing with error) check in PO type UB (Stock Transport Order), how to go about it? Is there a standard solution? This order type is used only for transfering stock within
-
Brother DCP-120C does not print
I am having issues with my Brother DCP-120C. It worked well a while, but now i encounter some problems. When starting the cups daemon i get this error message in my error.log: E [13/Jan/2010:19:11:25 +0100] Unable to set ACLs on root certificate "/va