Problems when i upgraded device softwareware
i just got a new blackberry 8900..after using it for a few days, i upgraded the device software...after the upgradation i realized that some of the previous applications were missing. for example, the factory installed games (poker) was no longer available. i tried using restore (advance) so to get a few specific apps added back, but havent been successful..can anyone tell me how i can download that game and other lost apps or how i can restore them..thanks
can you download it from the internet ?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:
Similar Messages
-
I discovered this problem when I upgraded my iPhone 4 to a 5c.
My laptop will recognise my 5c and even the wife's iPad but won't recognuse her 5c, when I plug it in it makes a sound but just doesn't show up in iTunes.
It DID work on my laptop as recently as November when I backed up her phone and updated her software but like I say ever since I upgraded it just won't recognise her 5c but does mine.
I just can't think what is wrong? I haven't messed around with anything on the laptop or messed around with the wife's settings on her 5c
HELP!!!!I would test with another computer and another cable
if it the device would not be detected by any computer I
would say that it's connector was broken -
hello guys i face a problem when i upgrade from iOS 4.2.1 to iOS 5.1.1 on ipad 3 .when i upgrade i don' t found the camera app from the built in apps.when i try to install from the app store i don't found the correct camera app .please help me .please give any suitable link where i find the correct camera app
It's a built-in app, so it can't be deleted nor downloaded from the store. If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > Camera being set 'off' ?
If not then have you tried a reset to see if you can find it after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
CSM problem when discovering a device
Dears,
i have CSM 4.2, i am facing a problem when i am adding one firewall, there is an asa 5580 between the CSM and that firewall 5510. there is the command fragment chain 1 INTERFACE where the 5510 is connected, when i remove this command from the 5580, the discovery works fine, in the logs it is saying that the packets are dropped due to fragment packets.. Any idea?
Regards,In the past I've been successfully deploying a few Ubuntu guest VMs, Hardware Virtualized (never succeeded to put up a Paravirtualized guest though) for testing purposes.
The latest version (10.4 maybe? Can't remember right now) worked without any sort of fixes or workarounds and was stable right away.
Previous versions needed a fix in the "grub.conf" file, and I had to put in a "NOAPIC" option to tell the kernel to inhibit some kind of interrupt events, I'm sorry I cannot be more specific but I can't remember exactly the real reasons behind the fix, I just know that without it I was getting a "processor stuck" error on the guest's console after a while, resulting in an unresponsive VM.
I see from your logfile that you have "APIC=1" and "ACPI=1", so maybe you'd want to play a bit with those settings and see the results.
My processors are Intel Xeon 5450.
HTH -
CS5 Device Central Stage.width/Stage.height update problem when change the device profile.
When creating FL 3.0/3.1 app and testing it at the CS5 Device Central if you change the profile of the active device(select different phone with different screen size) Stage.width/Stage.height could't change. Always stays the same as the first device's Stage.width and height. Even if you add addListener with Delegate nothing happends. Also it effects to Screen Oriantation. It looks like a problem or is this a bug?
Having the same problem, though I can't get it to connect even once. I just started researching the problem tonight - no solution yet...
I'm on Windows 7 Pro 64-bit, Production Premium CS 5.5.
I've got no other internet issues, Adobe update works fine.
Please - Anybody have an idea how to troubleshoot this problem?
Thank you. -
Xfce 4.8, drop hal: problem when extracting optical device
Hi,
If I umounted from thunar work perfectly.
If I extracting a dvd/cd with the phisical button in my pc xfce doesn't see that the device isn't insert.
Solutions?
tnxugaciaka wrote:
Hi,
If I umounted from thunar work perfectly.
If I extracting a dvd/cd with the phisical button in my pc xfce doesn't see that the device isn't insert.
Solutions?
tnx
Not sure about the overall solution but this problem has cropped up for me from time to time down through the years on several Linux distros. Having said that, does running "eject" from the command line pop open the disk? -
Audio Problems when setting default device
Everytime I try to set my headphones as the default sound device, my computer won't allow me to. I even tried to troubleshoot it, and it came up with the resolution of setting my headphones as the default device, but it failed to due to an error.
It only occurs whenever I use the program Mumble, as I am a gamer and I use it to communicate with my fellow gamers. So whenever I fire up the program, all other sound except what comes from it, goes to my speakers. I don't know if this has to do with the program Mumble itself, or the fact that I LITERALLY cannot change my default device. Please help?What version of Windows are you using?
Also, could you please give me the exact model number of your notebook?
You can use the following document if you need assistance in finding it.
http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=c00033108&...
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
MDS9509 iSCSI problem when upgrading to 3.1(2a)
Hi,
Hopefully someone can help, or at least point me in the direction as to where to look to fix this problem. On our site we have a couple of 9509 switches with the DS-X9308-SMIP IPS module, which we use to connect to some exposed LUN's on a HP EVA5000 disk array via a Proxy Initiator, and ACL's on the switch. The clients are on v2.0-754 of open-iscsi on SLES 10.1 machines.
Now we are seeing a strange problem, when we upgraded the SAN-OS on the switches from 2.1(2e) to 3.1(2a) (and I have verified the problem still exists with v. 3.1(3), which is does) in that the iSCSI clients, can still see their disks (via sendtargets), however when they attempt to login to them, you get the following message in dmesg/syslog
scsi4 : iSCSI Initiator over TCP/IP
4:0:0:0: scsi scan: consider passing scsi_mod.dev_flags=COMPAQ:HSV110 (C)COMPAQ:0x240 or 0x1000240
and no device file is created (I have tried passing the option suggested via -v, and in the iscsid.conf file, however it doesn't fix the problem) whereas when the switch is running on 2.1(2e) with the same configuration, it all works, and this appears in syslog:
scsi6 : iSCSI Initiator over TCP/IP
Vendor: COMPAQ Model: HSV110 (C)COMPAQ Rev: 2001
Type: Direct-Access ANSI SCSI revision: 04
SCSI device sdb: 104857600 512-byte hdwr sectors (53687 MB)
sdb: Write Protect is off
sdb: Mode Sense: 97 00 10 08
SCSI device sdb: drive cache: write through w/ FUA
SCSI device sdb: 104857600 512-byte hdwr sectors (53687 MB)
sdb: Write Protect is off
sdb: Mode Sense: 97 00 10 08
SCSI device sdb: drive cache: write through w/ FUA
sdb: sdb1
sd 6:0:0:0: Attached scsi disk sdb
sd 6:0:0:0: Attached scsi generic sg5 type 0
Luckily we have 2 switches, so we have 1 working configuration to leave for production, and one we have to try and troubleshoot this issue. However we would like to update the SAN-OS at some point, and get some failover setup incase of fabric issues.
So has anyone else seen this problem, and know how to fix it? I have gone through the online Cisco documentation, and I could not find anything which helped, hence this post.
Any help would be much appreciated.Only 2 PDU commands and responses.
These are probably a SCSI Report LUNs and/or a SCSI Inquiry. Perhaps the storage is sending a SCSI check condition, eg. lun masking is blocking the host. You should really get an ethereal trace on the ethernet to see what those PDUs are in detail.
Initiator x.x.164.14 (suse-test)
Initiator name iqn.1996-04.de.suse:01.c48fdfc3cec6
Session #1 (index 6)
Target iqn.1986-03.com.x.x:disk.ress.lun0
VSAN 255, ISID 00023d000000, TSIH 4097, Status active, no reservation
Type Normal, ExpCmdSN 3, MaxCmdSN 130, Barrier 0
MaxBurstSize 262144, MaxConn 1, DataPDUInOrder Yes
DataSeqInOrder Yes, InitialR2T No, ImmediateData Yes
Registered LUN 0, Mapped LUN 1
Stats:
PDU: Command: 2, Response: 2 <<<<<<<< -
Unmarshaller failed problem when upgrading weblogic8.1 domain to 9.2
Hi,I met a problem when I upgrade a 8.1 domain to 9.2 using upgrade tool. It seems the web.xml has error, and I also read some topic about this problem, but I didn't find there's any duplicate elements in this file, could anybody help me? Thank you! Here is the error and the xml file.
==================The error====================
Unable to load descriptor /tmp/appcgen_EPCISProject_v18.7.ear/EPCISWeb/WEB-INF/web.xml of module EPCISWeb. The error is weblogic.descriptor.DescriptorException: Unmarshaller failed
at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:147)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
at weblogic.application.compiler.WARModule.processLibraries(WARModule.java:286)
at weblogic.application.compiler.WARModule.merge(WARModule.java:303)
at weblogic.application.compiler.flow.MergeModuleFlow.compile(MergeModuleFlow.java:23)
at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
at weblogic.application.compiler.FlowDriver$CompilerFlowDriver.compile(FlowDriver.java:96)
at weblogic.application.compiler.ReadOnlyEarMerger.merge(ReadOnlyEarMerger.java:41)
at weblogic.application.compiler.flow.AppMergerFlow.mergeInput(AppMergerFlow.java:94)
at weblogic.application.compiler.flow.AppMergerFlow.compile(AppMergerFlow.java:47)
at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
at weblogic.application.compiler.FlowDriver$CompilerFlowDriver.compile(FlowDriver.java:96)
at weblogic.application.compiler.AppMerge.runBody(AppMerge.java:130)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:115)
at weblogic.application.compiler.AppMerge.merge(AppMerge.java:142)
at weblogic.deploy.api.internal.utils.AppMerger.merge(AppMerger.java:70)
at weblogic.deploy.api.internal.utils.AppMerger.getMergedApp(AppMerger.java:51)
at weblogic.deploy.api.model.internal.WebLogicDeployableObjectFactoryImpl.createDeployableObject(WebLogicDeployableObjectFactoryImpl.java:177)
at weblogic.deploy.api.model.internal.WebLogicDeployableObjectFactoryImpl.createLazyDeployableObject(WebLogicDeployableObjectFactoryImpl.java:150)
at weblogic.deploy.api.model.WebLogicDeployableObject.createLazyDeployableObject(WebLogicDeployableObject.java:730)
at weblogic.deploy.api.tools.Inspector.setup(Inspector.java:47)
Caused by: com.bea.xml.XmlException: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.TagLibBeanImpl@a6cbe1f4(//TagLibs[WEB-INF/c.tld])"
at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:54)
at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:385)
at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:145)
at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.unmarshalElementProperty(LiteralUnmarshalResult.java:159)
at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.extractAndFillElementProp(LiteralUnmarshalResult.java:130)
at com.bea.staxb.runtime.internal.ByNameUnmarshaller.deserializeContents(ByNameUnmarshaller.java:51)
at com.bea.staxb.runtime.internal.AttributeUnmarshaller.unmarshalIntoIntermediary(AttributeUnmarshaller.java:47)
at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:184)
at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
at weblogic.application.compiler.WARModule.processLibraries(WARModule.java:286)
at weblogic.application.compiler.WARModule.merge(WARModule.java:303)
at weblogic.application.compiler.flow.MergeModuleFlow.compile(MergeModuleFlow.java:23)
at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
at weblogic.application.compiler.FlowDriver$CompilerFlowDriver.compile(FlowDriver.java:96)
at weblogic.application.compiler.ReadOnlyEarMerger.merge(ReadOnlyEarMerger.java:41)
at weblogic.application.compiler.flow.AppMergerFlow.mergeInput(AppMergerFlow.java:94)
at weblogic.application.compiler.flow.AppMergerFlow.compile(AppMergerFlow.java:47)
at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
Caused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.TagLibBeanImpl@a6cbe1f4(//TagLibs[WEB-INF/c.tld])"
at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:207)
at weblogic.j2ee.descriptor.JspConfigBeanImpl.setTagLibs(JspConfigBeanImpl.java:128)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:385)
at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:145)
at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.unmarshalElementProperty(LiteralUnmarshalResult.java:159)
at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.extractAndFillElementProp(LiteralUnmarshalResult.java:130)
at com.bea.staxb.runtime.internal.ByNameUnmarshaller.deserializeContents(ByNameUnmarshaller.java:51)
at com.bea.staxb.runtime.internal.AttributeUnmarshaller.unmarshalIntoIntermediary(AttributeUnmarshaller.java:47)
at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:184)
at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
at weblogic.application.compiler.WARModule.processLibraries(WARModule.java:286)
at weblogic.application.compiler.WARModule.merge(WARModule.java:303)
at weblogic.application.compiler.flow.MergeModuleFlow.compile(MergeModuleFlow.java:23)
... 2 more
An unexpected error specifying configuration information for the application 'EPCISProject_v18.7' due to weblogic.management.provider.UpdateException: Exception in AppMerge flows' progression.
=====================The web.xml=====================
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app id="WebApp">
<display-name>OnJavaCom Sample</display-name>
<!--
- Location of the XML file that defines the root application context
- Applied by ContextLoaderListener.
-->
<context-param>
<param-name>contextConfigLocation</param-name>
<param-value>
/WEB-INF/applicationContext.xml
/WEB-INF/securityContext.xml
/WEB-INF/jobContext.xml
/WEB-INF/epcContext.xml
/WEB-INF/naiContext.xml
/WEB-INF/reportContext.xml
/WEB-INF/tablemaintenanceContext.xml
/WEB-INF/QIContext.xml
/WEB-INF/feedbackContext.xml
/WEB-INF/loginContext.xml
</param-value>
</context-param>
<context-param>
<param-name>log4jConfigLocation</param-name>
<param-value>/WEB-INF/log4j.properties</param-value>
</context-param>
<!--
- Loads the root application context of this web app at startup,
- by default from "/WEB-INF/applicationContext.xml".
- Use WebApplicationContextUtils.getWebApplicationContext(servletContext)
- to access it anywhere in the web application, outside of the framework.
- The root context is the parent of all servlet-specific contexts.
- This means that its beans are automatically available in these child contexts,
- both for getBean(name) calls and (external) bean references.
- If your web container loads listeners first then this will work fine. Otherwise,
use the SpringContextServlet to load the context.
-->
<listener>
<listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
</listener>
<listener>
<listener-class>com.bea.wlw.runtime.core.servlet.WebappContextListener</listener-class>
</listener>
<listener>
<listener-class>org.springframework.web.util.Log4jConfigListener</listener-class>
</listener>
<servlet>
<servlet-name>action</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>config/main</param-name>
<param-value>/WEB-INF/struts-config-main.xml</param-value>
</init-param>
<init-param>
<param-name>storage</param-name>
<param-value>de.laures.cewolf.storage.TransientSessionStorage</param-value>
</init-param>
<!-- sets overlib.js location relative to webapp -->
<init-param>
<param-name>overliburl</param-name>
<param-value>etc/overlib.js</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>detail</param-name>
<param-value>2</param-value>
</init-param>
<init-param>
<param-name>validate</param-name>
<param-value>true</param-value>
</init-param>
<load-on-startup>2</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
<taglib>
<taglib-uri>/WEB-INF/struts-bean-el.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-html-el.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-html.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-logic-el.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-nested.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-nested.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-template.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-template.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-tiles.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-tiles.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/c.tld</taglib-uri>
<taglib-location>/WEB-INF/c.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/cewolf-1.1.tld</taglib-uri>
<taglib-location>/WEB-INF/cewolf-1.1.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/c.tld</taglib-uri>
<taglib-location>/WEB-INF/cewolf.tld</taglib-location>
</taglib>
<!--
In taglibs.jsp
<%@ taglib uri="/WEB-INF/struts-layout.tld" prefix="layout" %>
-->
<taglib>
<taglib-uri>/WEB-INF/struts-layout.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-layout.tld</taglib-location>
</taglib>
<filter>
<filter-name>Acegi Filter Chain Proxy</filter-name>
<filter-class>org.acegisecurity.util.FilterToBeanProxy</filter-class>
<init-param>
<param-name>targetClass</param-name>
<param-value>org.acegisecurity.util.FilterChainProxy</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>Acegi Filter Chain Proxy</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
<listener>
<listener-class>org.acegisecurity.ui.session.HttpSessionEventPublisher</listener-class>
</listener>
<session-timeout>60</session-timeout>
<servlet>
<servlet-name>NAI</servlet-name>
<servlet-class>com.epc.common.servlet.EPCISServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>NAI</servlet-name>
<url-pattern>/NAI</url-pattern>
</servlet-mapping>
<servlet>
<servlet-name>MGB</servlet-name>
<servlet-class>com.epc.common.servlet.MGBServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>MGB</servlet-name>
<url-pattern>/MGB</url-pattern>
</servlet-mapping>
<servlet>
<servlet-name>CewolfServlet</servlet-name>
<servlet-class>de.laures.cewolf.CewolfRenderer</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>CewolfServlet</servlet-name>
<url-pattern>/main/cewolf/*</url-pattern>
</servlet-mapping>
</web-app>I am dealing with the same issue. I am trying to install Business Objects Enterprise 11.
####<Aug 2, 2007 12:17:18 PM CDT> <Error> <Console> <imagenow> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1186075038254> <BEA-240003> <Console encountered the following error weblogic.application.ModuleException: [HTTP:101064][WebAppModule(Report Server Admin:admin)] Error parsing descriptor in Web appplication "C:\inreports\BusinessObjects Enterprise XI\BusinessObjects Enterprise 11\java\applications\admin"
weblogic.application.ModuleException: Unmarshaller failed
at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:781)
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:272)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:46)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:147)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:61)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:189)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:87)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:718)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1185)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:247)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:157)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.ServletMappingBeanImpl@e30790b(/ServletMappings[weblogic.descriptor.internal.CompoundKey@ea2c6ca])"
at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:207)
at weblogic.j2ee.descriptor.WebAppBeanImpl.setServletMappings(WebAppBeanImpl.java:1227)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:385)
at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:145)
at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:185)
at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:775)
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:272)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:46)
weblogic.application.ModuleException: Unmarshaller failed
at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:781)
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:272)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:46)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:147)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:61)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:189)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:87)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:718)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1185)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:247)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:157)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.ServletMappingBeanImpl@e30790b(/ServletMappings[weblogic.descriptor.internal.CompoundKey@ea2c6ca])"
at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:207)
at weblogic.j2ee.descriptor.WebAppBeanImpl.setServletMappings(WebAppBeanImpl.java:1227)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:385)
at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:145)
at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:185)
at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:775)
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:272)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:46)
at weblogic.servlet.internal.WebAppModule.createModuleException(WebAppModule.java:980)
at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:799)
... 25 more
Caused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.ServletMappingBeanImpl@e30790b(/ServletMappings[weblogic.descriptor.internal.CompoundKey@ea2c6ca])"
at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:207)
at weblogic.j2ee.descriptor.WebAppBeanImpl.setServletMappings(WebAppBeanImpl.java:1227)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:385)
at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:145)
at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:185)
at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:775)
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:272)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:46)
WEB.XML FILE
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
<!-- General description of your web application -->
<display-name>Admin Web Examples</display-name>
<description>
Crystal Enterprise admin web examples.
</description>
<!-- Context initialization parameters that define shared
String constants used within your application, which
can be customized by the system administrator who is
installing your application. The values actually
assigned to these parameters can be retrieved in a
servlet or JSP page by calling:
String value =
getServletContext().getInitParameter("name");
where "name" matches the <param-name> element of
one of these initialization parameters.
You can define any number of context initialization
parameters, including zero.
-->
<!-- You can specify the default CMS machine name here -->
<!-- Put your CMS name inside <param-value> </param-value> -->
<!-- eg. <context-param> -->
<!-- <param-name> CMS </param-name> -->
<!-- <param-value> CrystalMS </param-value> -->
<!-- eg. </context-param> -->
<context-param>
<param-name> CMS </param-name>
<param-value> aschmidt </param-value>
</context-param>
<!-- Uncomment the following context-param if you are using
multi-byte characters with WebLogic. Please note that for this
to work your application will need to send data to and receive
data from the client browser in UTF8-->
<!--
<context-param>
<param-name>weblogic.httpd.inputCharset./*</param-name>
<param-value>utf-8</param-value>
</context-param>
-->
<!-- This context parameter specifies where to put the temporary image files that the viewer generates -->
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>../crystalreportviewers11</param-value>
</context-param>
<!-- Uncomment out the following three context parameters to enable viewer exception logging. Not needed for
normal running but could be useful for troubleshooting -->
<!--
<context-param>
<param-name>crystal_enable_logging</param-name>
<param-value>true</param-value>
<description>
"true" to enable
</description>
</context-param>
<context-param>
<param-name>crystal_exception_info</param-name>
<param-value>long</param-value>
<description>
To display the exception info or not. If this parameter is not set, the default value is short.
It can be one of the following values:
a) disable - Not display the exception info. The exception will be rethrown and user has to handle it.
b) short - Display the exception info in the short form. It displays the exception message only.
c) long - Display the exception info in the long form. It displays the exception including the stack trace.
</description>
</context-param>
<context-param>
<param-name>crystal_exception_log_file</param-name>
<param-value>c:\webreporting.log</param-value>
<description>
Set this parameter to log the exception in long form to the file specified.
The value is the full path of the log file.
</description>
</context-param>
-->
<!-- Servlet Mappings -->
<servlet>
<servlet-name> objectViewer </servlet-name>
<description>
Object Viewer
</description>
<servlet-class> com.crystaldecisions.examples.ObjectViewerServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>manageAccounts</servlet-name>
<description>
Manage User/Group Accounts
</description>
<servlet-class>com.crystaldecisions.examples.ManageAccountsServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>adminLDAP</servlet-name>
<description>
Administrate LDAP plugin
</description>
<servlet-class>com.crystaldecisions.examples.AdminLDAPServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>logon</servlet-name>
<description>
Logon to the CMS
</description>
<servlet-class>com.crystaldecisions.examples.LogonServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>deleteInstance</servlet-name>
<description>
Delete instances
</description>
<servlet-class>com.crystaldecisions.examples.DeleteInstanceServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>setReportLogons</servlet-name>
<description>
Set DB Logons
</description>
<servlet-class>com.crystaldecisions.examples.SetReportLogonsServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>setReportSchedule</servlet-name>
<description>
Set DB schedule settings
</description>
<servlet-class>com.crystaldecisions.examples.SetReportScheduleServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>serverAdmin</servlet-name>
<description>
Administrate servers.
</description>
<servlet-class>com.crystaldecisions.examples.ServerAdminServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>viewreport</servlet-name>
<description>
View report
</description>
<servlet-class>com.crystaldecisions.examples.ViewReportServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>viewrpt</servlet-name>
<description>
Reportsource bridge used to support Java applet viewer and ActiveX viewer.
</description>
<servlet-class>com.businessobjects.crystalreports.reportsourcebridge.ReportSourceBridge</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>localizeURL</servlet-name>
<description>
Used to redirect to the localized html page
</description>
<servlet-class>com.crystaldecisions.examples.LocalizeURLServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>setRightsTablePref</servlet-name>
<description>
Used to set Object Rights Table's viewing preferences
</description>
<servlet-class>com.crystaldecisions.examples.SetRightsTablePrefServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>manageAccounts</servlet-name>
<url-pattern>/changeAliasesPasswords/manageAccounts</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>adminLDAP</servlet-name>
<url-pattern>/adminLDAP/adminLDAP</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>setReportLogons</servlet-name>
<url-pattern>/changeDBLogon/setReportLogons</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>serverAdmin</servlet-name>
<url-pattern>/onePageServerAdministration/serverAdmin</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/changeAliasesPasswords/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/adminLDAP/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/instancesByStatus/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>deleteInstance</servlet-name>
<url-pattern>/instancesByStatus/deleteInstance</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>objectViewer</servlet-name>
<url-pattern>/instancesByStatus/objectViewer</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>viewreport</servlet-name>
<url-pattern>/instancesByStatus/viewreport</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>viewrpt</servlet-name>
<url-pattern>/viewrpt.cwr</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/instancesByStatus/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/changeDBLogon/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>setReportLogons</servlet-name>
<url-pattern>/changeDBLogon/setReportLogons</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/onePageServerAdministration/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>viewreport</servlet-name>
<url-pattern>/instancesByStatus/viewreport</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>deleteInstance</servlet-name>
<url-pattern>/instancesByStatus/deleteInstance</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>setReportLogons</servlet-name>
<url-pattern>/changeDBLogon/setReportLogons</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>localizeURL</servlet-name>
<url-pattern>/instances/localizeURL</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/rightsTable/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/userAdminTool/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>setRightsTablePref</servlet-name>
<url-pattern>/rightsTable/setRightsTablePref</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/repositoryHelper/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/shortcutManager/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/adminToolConsole/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/query/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>setReportSchedule</servlet-name>
<url-pattern>/changeDBLogon/setReportSchedule</url-pattern>
</servlet-mapping>
<!-- Define the default session timeout for your application,
in minutes. From a servlet or JSP page, you can modify
the timeout for a particular session dynamically by using
HttpSession.getMaxInactiveInterval(). -->
<session-config>
<session-timeout>20</session-timeout> <!-- 20 minutes for session objects -->
</session-config>
<!-- The welcome file list -->
<welcome-file-list>
<welcome-file>default.htm</welcome-file>
</welcome-file-list>
</web-app>
WEBLOGIC.XML FILE
<weblogic-web-app>
<context-root>/businessobjects/enterprise11/adminlaunch</context-root>
</weblogic-web-app> -
On my Ipad I seem to be having a problem when trying to play YouTube videos embedded on Facebook.
When I click the links, I get a message saying: "Flash Player upgrade required."
and under it, it says, "You need to download and install the lastes version of Adobe Flash Player to view this content"
and also a green button saying "Get Flash Player"
I get this if using chrome or safari .
I can go direct to YouTube it just works.The Facebook link to the video is accessing an Adobe Flash video. Unfortunately, no iOS devices can play flash.
-
I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?
Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer. -
Hi i have an ipod 4th gen. the problem is when ever i try to sync my iPod to my computer a mesage comes up and says that the ipod can't be backed up. There wasn't a problem until I upgraded the software. How do I fix this??
Try here:
iOS: Troubleshooting backup issues in iTunes -
Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks
search google for "iphone remove picture from contact"
-
How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?
Hey tyjox,
Thanks for the question. After reviewing your post, it sounds like you need to deactivate Find My iPhone on a device that does not work. You will need to work with the family member of the account the iPhone is registered with. I would recommend that you use this article to help you resolve or isolate the issue.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
Remove an iOS device you no longer have
If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud).If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device.
Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
When the device is erased, click Remove from Account.All your content is erased and someone else can now activate the device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I recently upgraded from 4S to 5S. There are 2 games that I wish to transfer to the new device. 1st game isn't available in the Store anymore, so can't download. 2nd game doesn't save when you change devices. How do I get those 2 apps to my new phone? Can I do that manually through iTunes?
Thanks!Hello jon713,
Thank you for using Apple Support Communities.
For more information, take a look at:
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
App Store Application data (except the Application itself, its tmp, and Caches folder)
Application settings, preferences, and data, including documents
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
To transfer iTunes Store purchases from your device to a computer, follow these steps:
Connect your device to the computer. If it is synced with another iTunes library, the following dialog may appear:
Click the Transfer Purchases button.
Have a nice day,
Mario
Maybe you are looking for
-
Read from Text File Detailed Help need Clean-up
This is probably well known and nobody has bothered fixing it but the detailed Help of the "Read from Text File" function is sort of ambiguous: - statement 1: refnum out is the refnum of the file that the function read. You can wire this output to a
-
How do you allow Unix based ONC RPC within the security constraints of SGD
On our new boxes running SGD 4.2.91and up we notice that our applications that uses rpc to communicate no longer work. One of the programs, the arbitrator, (i.e. runs in its on process space, not a linked in library). Therefore, two user will share t
-
Burning downloaded movie to DVD
Is it possible to burn a movie i have downloaded from itunes onto a DVD?
-
Hi, I recently made the move to Mac and i've always uploaded to my server via dreamweaver's split view interface. Typically I'd simply select a file and drag it over to the directory that i want it uploaded to. i'm using Mac's Dreamweaver CS5 and f
-
Additional text field in Infoset deleted but not reflected in field selection in Query
Hi, I have deleted an additional text field in infoset. It was used in one query. Even in the query it is deleted, but when in field selection screen i am not able to delete. If i try to execute the query, I get dump (syntax error) saying in field ty