Problems when installing the SAP Netweaver 2004s Trial version on Fedora 9

Dear all,
I have been trying to install the SAP Netweaver 2004s Trial version on Fedora 9, 64 bit, x86_64, but have not been able to accomplish this correctly.
New to the Linux environment as well, and hence not completely sure about the issues here. According to the steps outlined for the installation, i downloaded and installed the IBM Java SDK and then executed the install.sh script file from the download.
The installation went well, but when i try to start the sap system using the command startsap, i get the error message command not found.
Could anyone please guide.
Thanks,
Dabre

> The installation went well, but when i try to start the sap system using the command startsap, i get the error message command not found.
as which user did you execute that command?
Markus

Similar Messages

  • SAP NetWeaver 2004s Trial Version License Renewal

    Hi,
    How many times can I extend my license for SAP NetWeaver 2004s Trial Version?
    Also, is there any fee for every license extension?
    Thanks in advance,
    Haris

    Dear Haris,
    Currently there's no limit and no fee for license renewals. In the past, license renewal had been stopped for some time though, which made a lot of people in this board very unhappy, but hopefully this won't happen again...
    Best wishes,
    Jan

  • License key for  "SAP NetWeaver 2004 - Trial Version on Linux"

    I want to evaluate the software u201E SAP NetWeaver 2004 - Trial Version on Linuxu201C and i need a license-key for test drive.
    Unfortunately I can not find a page where I can request a valid license for our test. I only find license keys for the u201E SAP NetWeaver 2004s - Trial Version on Linuxu201C.
    Please can You help me?

    Hello
    yu can download abap trail veriosn from this link
    but u have to create a/c in dsn.sap.com
    link is as below
    https://www.sdn.sap.com/irj/sdn/nw-downloads
    1)SAP NetWeaver 7.01 - ABAP Trial Version
    2)SAP NetWeaver 7.0 (2004s) - Trial Version on Linux SAP Evaluation Software
    3)SAP NetWeaver 2004 - Trial Version on Linux SAP Evaluation Software
    that will hepl out 100 %
    Regards
    Jayesh

  • Tell me the steps to install SAP NetWeaver 2004s Trial Version

    Tell me the steps to install SAP NetWeaver 2004s Trial Version

    Hi,
    Check this link,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/77317c8d-0701-0010-f093-ed35a427f559
    Cheers,
    Darshna.

  • Installing SAP NetWeaver 2004s Trial version (JAVA & ABAP )

    Hi All.
    Is it possible to install both versions of SAP NetWeaver 2004s (ABAP & JAVA) in the same machine ? Is there a tutorial or step by step ?
    Thanks.

    Hi,
    It is possible. have a look on this thread and try to search in forum too. u will find a lot of disscussion on this topic before.
    abap on java stack.
    Hope it helps
    Regards
    Subhash

  • Problems installing SAP NetWeaver 2004 trial version from book DVD

    Hi
    I'm trying to install netweaver trial version from the dvd in Horst Keller's book ABAP Objects but am having problems. I have tried to uninstall and start again but I keep getting the message below. Any suggestions welcome as I'm new to all this.
    (Apr 1, 2008 11:59:57 AM), Install, com.installshield.product.actions.DeleteDirectory, err, An error occurred and product installation failed.  Look at the log file D:\SAP\NSP\log.txt for details.
    (Apr 1, 2008 11:59:57 AM), Install, com.installshield.product.actions.DeleteDirectory, err, ProductException: (error code = 601; message="err"; additional data = [Unable to delete D:\SAP\NSP\_installTemp : ServiceException: (error code = -30020; message = "The directory is not empty.
    (145)"; severity = 0)])
    STACK_TRACE: 14
    ProductException: (error code = 601; message="err"; additional data = [Unable to delete D:\SAP\NSP\_installTemp : ServiceException: (error code = -30020; message = "The directory is not empty.
    (145)"; severity = 0)])
         at com.installshield.product.actions.DeleteDirectory.deleteDirectory(Unknown Source)
         at com.installshield.product.actions.DeleteDirectory.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    Hello Sharon,
    I don't know this book you've mentioned, but perhaps it's the same trail version as you can download from SAP.
    To uninstall it please go through the steps provided in the first part of the following site --> link
    Then try to delete the D:SAPNSP-folder again.
    Also please check your services-file under C:WINDOWSsystem32driversetc that there aren't any entries like NSP left.
    Regards,
    Norman Schröder

  • How to extend my SAP NetWeaver 2004s Trial Version license ?

    Hi All,
    I am new to the netweaver, thought i had installed the system some time back, now the license of the trial version has expired and i want to know how can i go about extending the trial version license. Or do i have to go through all the pain of installing the system again. Please help me out.
    Cheers,
    Sudheer Alladi.

    No. You can send a request again with your Hardware Key on the below given ink and you will get your license.
    [License Renew|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/minisap/minisap.htm]
    Regards,
    Subhash

  • Install Trial BO like SAP Netweaver ABAP Trial version

    Hello, i would like to know if it´s possible to install some trial Version of BO in orther to install it in my laptop like i´ve just done with the SAP Netweaver ABAP Trial Version 701 (With SAP-BW 70).
    I know that that there are some links to download BO software but i really don´t know where to start and if there is any problem with the installation on my laptop with MaxDB ans SAP server installed... basically i have installed SAP with BW in my laptop and it´s working ok. Wich software may i install and wich are the requirements if i want to practice with BO ?
    I´ve just downloaded BO from the following link but it´s the correct one ?
    http://www.businessobjects.com/forms/datasave.asp?id=701600000008kgy
    Besides this i´ve just found another one
    https://www.sdn.sap.com/irj/boc/business-objects-for-sap?rid=/webcontent/uuid/806c9894-42a5-2b10-648a-d900489b76da
    Wich one i have to install ? it´s the same ? it works with OS XP-Pro ? anything else to install ?
    Thanks in advance,
    Best regards,
    Joaquin Casas

    Hi,
    this should get you started:
    Install Part #1
    /people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
    Install Part #2
    /people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-2-of-4
    Install Part #3
    /people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-3-of-4
    Install Part #4
    /people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-4-of-4
    SAP Authentication
    /people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
    Publishing part 1
    /people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
    Publishing part 2
    /people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
    Publishing part 3
    /people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
    XC, CR and LO Part 1 of 4
    /people/ingo.hilgefort/blog/2008/10/03/businessobjects-and-sap-part-1-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
    XC, CR and LO Part 2 of 4
    /people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-2-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
    XC, CR and LO Part 3 of 4
    /people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-3-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
    XC, CR and LO Part 4 of 4
    /people/ingo.hilgefort/blog/2008/10/10/businessobjects-and-sap-part-4-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
    Technical Material
    /people/ingo.hilgefort/blog/2008/11/19/businessobjects-integration-with-sap-netweaver-bi--technical-material
    In regards to the supported platforms look at http://service.sap.com/bosap-support
    Ingo

  • SAP Netweaver ABAP Trial Version password expired

    Hi All,
    I just got an installer for the SAP NetWeaver ABAP Trial Version and I was able to install the Trial version. However, my license have already expired. So what I did was is to renew the license. But my problem right now is that I can't logon using BCUSER. I'm getting  "Logon not possible (error in license check".
    During the time when I renew the license, i didn't encounter any errors or problems.
    Could anybody tell me what I'm doing wrong?
    How can I have BCUSER up and running since I need this account to practice ABAP?
    I tried deleting the old license using SAP* user because I don't think it is possible to do using that user.
    Thanks
    James

    I have had a similar issue but the above remedy did not fix my problem.  I had successfully installed the trial version and used it until the license expired.  After downloading a new license, I installed it using SAP*.  The installation was successful however, when trying to login using BCUSER I am still getting that same error.
    Under slicense, user sap*, I have the following:
    NSP     TEMPLICENSE     NetWeaver_ADA     26.10.2008     25.01.2009     Perm     DEMOSYSTEM     000000000311079138      Valid
    Sorry for the sloppy cut&paste but you can see that the install appears to be valid.
    Is my only recourse to uninstall and reinstall the trial version?  Also, is there some way for me to backup any of the work I have done in SE80 before wiping the install?
    Thanks in advance,
    Rob

  • Can I instal SAP Netweaver 2004s trial on windows vista home premium

    Hi ,
    Can I install SAP Netweaver 2004s trial on WIndows vista home premium. Please advise.
    One more thing is I am not able to download the Trial version from the SAP's FTP site. Because ftp is blocked in our company. Is there any other site from which I can download the trial version. Please advise.
    Thanks,
    Sam.

    In this Forum it appears that Windows 2000 with SP4 will work as well (haven't tried it).
    If you've got VISTA you could consider running the trial on a Virtual Machine. Parallels,  and vmware offer commercial vm products for generating Virtual machines whilst Microsoft (Virtual Pc2007) and VBOX offer Free virtualisation products.  Vmware also provides a FREE vmware server virtualisation product --this works fine as well although no multi-media support. However if you only need the Virtual Machine to run the Netweaver trial then that's no big deal.
    As I've posted elsewhere a Win XP pro Virtual Machine using only 512MB of RAM will give quite adequate performance of the ABAP trial. Don't even THINK of the Java edition unless you've got at LEAST 2GB - even on a Virtual Machine.
    Cheers
    Jimbo

  • Error to install the SAP NetWeaver Application Server ABAP 7.02 SP6 32-bit Trial Version

    Hi,
    Can anybody help me?
    I'm try to install the SAP NetWeaver Application Server ABAP 7.02 SP6 32-bit Trial Version... and in the Running phase 11: Create sequence for the ABAP user, I had this error:
    What do have I to do solve this problem?
    ERROR      2014-07-13 14:24:19.395 [iaxxinscbk.cpp:244]
    CJS-00030  Assertion failed:    :    [3336] 14:23:42    ***Warning: Loadavg: Could not add processor time performance counter to query.
    com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://virtuawjms/NSP [Restart required].
    ERROR      2014-07-13 14:24:19.395
    CJSlibModule::writeError_impl()
    MUT-03025  Caught ESAPinstException in Modulecall: :    [3336]  14:23:42 ***Warning: Loadavg: Could not add processor time performance counter to query.
    com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://virtuawjms/NSP [Restart required].
    ERROR      2014-07-13 14:24:19.495 [sixxcstepexecute.cpp:988]
    FCO-00011  The step SdbCheckExistingSequence with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Sequence|ind|ind|ind|ind|6|0|SdbCheckExistingSequence was executed with status ERROR ( Last error reported by the step :Assertion failed:    :    [3336] 14:23:42    ***Warning: Loadavg: Could not add processor time performance counter to query.
    com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://virtuawjms/NSP [Restart required].).
    INFO       2014-07-13 14:24:22.669 [synxcpath.cpp:815]
    CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Arquivos de programas\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\__instana_tmp.xml.
    WARNING    2014-07-13 14:24:24.752 [iaxxejshlp.cpp:150]
    Could not get property IDs of the JavaScript object.
    ERROR      2014-07-13 14:24:24.752 [iaxxejsctl.cpp:492]
    FJS-00010  Could not get value for property .

    Hi,
    Kindly follow SCN thread Sapinst error: No GUI server connected and try to restart the complete system.
    Regards,
    Gaurav

  • I can't install the SAP NetWeaver 7.0 ABAP Trial Version! HELP!

    can anyone help me ,when i install the SAP NetWeaver 7.0 ABAP Trial Version,it always clue on "The installer had to update some MicroSoft runtime libraries. For correct operation, a system reboot is required. Do you want to reboot now?" I have reboot more and more ,but it just the same.

    1. create an shortcut of the CD\image\setup.exe to your desktop
    2. change the properties of the shurtcut - compatibility - run program in "windows server 2003 sp1" mode and select "run as administrator"
    3. now you can doubleclick the shortcut and install the trial

  • Problems starting SAP NetWeaver AS Trial Version

    Hello Forum,
    Here is the summary of problem that I am facing starting SAP Netweaver AS Trial Version (post suucessful installation). I am mentioning successful installation is because on the day of the installation, I could start the NetWeaver AS Server and login using user BCUSER and go into SE80 (Object Navigator). The trouble started appearing thereafter.
    Here is the summary -
    When I dont have MS loopback Adapter activated on my Laptop, I get the following in SAP MMC
    The dispatcher process thread begins but haves a status - cannot connect to the message server
    When I install and activate MS loopback Adapter on my Laptop, I get the following in SAP MMC
    The Message Server and Dispatcher Starts Off, After a while (a minute), Dispatcher status turns to Message Server COnnection OK, Dialog Queue Time 0:00, after a While (a minute), it gives a message and stops. After this point Message Server is shown as running and Dispatcher is stopped.
    I am attaching the dev_disp for reference.  Obviously I think the problem lurking somewhere in the midst of Network Adapter Configuration - Please help me to resolve the same.
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      00
    sid        NSP
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    95
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        4808
    Tue Oct 27 07:45:11 2009
    kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
    length of sys_adm_ext is 360 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 4808) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 95 successfully loaded
         shared lib "dw_xtc.dll" version 95 successfully loaded
         shared lib "dw_stl.dll" version 95 successfully loaded
         shared lib "dw_gui.dll" version 95 successfully loaded
         shared lib "dw_mdm.dll" version 95 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c  5217]
    Tue Oct 27 07:45:15 2009
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5355]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >UKCL515803_NSP_00                       <
    DpShMCreate: sizeof(wp_adm)          6328     (904)
    DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    DpShMCreate: sizeof(wp_ca_adm)          1200     (60)
    DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1280)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 04F00040, size: 4205552)
    DpShMCreate: allocated sys_adm at 04F00040
    DpShMCreate: allocated wp_adm at 04F01A28
    DpShMCreate: allocated tm_adm_list at 04F032E0
    DpShMCreate: allocated tm_adm at 04F03310
    DpShMCreate: allocated wp_ca_adm at 052735A0
    DpShMCreate: allocated appc_ca_adm at 05273A50
    DpShMCreate: allocated comm_adm at 05273F00
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 052F4DB0
    DpShMCreate: allocated gw_adm at 052F4DF0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 052F4E20
    DpShMCreate: allocated wall_adm at 052F4E28
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    Tue Oct 27 07:45:16 2009
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( UKCL515803) [dpxxdisp.c   11663]
    DpStartStopMsg: send start message (myname is >UKCL515803_NSP_00                       <)
    DpStartStopMsg: start msg sent
    CCMS: alert/MONI_SEGM_SIZE = 0   monitoring and alerting switched off.
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 95
    Release check o.K.
    Tue Oct 27 07:45:56 2009
    MBUF state ACTIVE
    ERROR => gateway (pid 5188) died [dpxxdisp.c   15372]
    DpGwCheck: appc_adm.stat = 2
    DP_FATAL_ERROR => Gateway could not be started - I better exit now
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    [DpWpDied] W0 lives  (PID:5072  HANDLE:1616)
    killing W0-5072 (SIGUSR2)
    [DpWpDied] W1 lives  (PID:3868  HANDLE:1612)
    killing W1-3868 (SIGUSR2)
    [DpWpDied] W2 lives  (PID:5148  HANDLE:1608)
    killing W2-5148 (SIGUSR2)
    [DpWpDied] W3 lives  (PID:5004  HANDLE:1604)
    killing W3-5004 (SIGUSR2)
    [DpWpDied] W4 lives  (PID:1640  HANDLE:1600)
    killing W4-1640 (SIGUSR2)
    [DpWpDied] W5 lives  (PID:4780  HANDLE:1596)
    killing W5-4780 (SIGUSR2)
    [DpWpDied] W6 lives  (PID:4108  HANDLE:1592)
    killing W6-4108 (SIGUSR2)
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1657
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Oct 27 07:46:06 2009
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    max_rq_id          37
    wake_evt_udp_now     1
    wake events           total    37,  udp     9 ( 24%),  shm    28 ( 75%)
    since last update     total    37,  udp     9 ( 24%),  shm    28 ( 75%)
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1657
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Oct 27 07:46:11 2009
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >UKCL515803_NSP_00                       < (normal)
    DpJ2eeDisableRestart
    read msgserver-list from MBUF
    DpMBufMod: name [UKCL515803_NSP_00                       ], types 159 state 3 (0x0 0x0 0x0 0x0)
    AdGetSelfIdentRecord: >                                                                           <
    WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c   13116]
    NiBufIAlloc: malloc wp ca_blk, to 1188 bytes
    ALLOC local ca_blk 10000 (len 1188)
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 38)
    MBUF server state SHUTDOWN
    DpModState: change state STARTING -> SHUTDOWN
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    [DpWpDied] W0 lives  (PID:5072  HANDLE:1616)
    [DpWpDied] W1 lives  (PID:3868  HANDLE:1612)
    [DpWpDied] W2 lives  (PID:5148  HANDLE:1608)
    [DpWpDied] W3 lives  (PID:5004  HANDLE:1604)
    [DpWpDied] W4 lives  (PID:1640  HANDLE:1600)
    [DpWpDied] W5 lives  (PID:4780  HANDLE:1596)
    [DpWpDied] W6 lives  (PID:4108  HANDLE:1592)
    Stop work processes
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1657
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Oct 27 07:46:12 2009
    NiISelect: TIMEOUT occured (1000ms)
    wait for end of exclusive shutdown
    [DpWpDied] W0 died  (PID:5072  HANDLE:1616)
    [DpWpDied] W1 died  (PID:3868  HANDLE:1612)
    [DpWpDied] W2 died  (PID:5148  HANDLE:1608)
    [DpWpDied] W3 died  (PID:5004  HANDLE:1604)
    [DpWpDied] W4 died  (PID:1640  HANDLE:1600)
    [DpWpDied] W5 died  (PID:4780  HANDLE:1596)
    [DpWpDied] W6 died  (PID:4108  HANDLE:1592)
    Stop icman
    killing process (5208) (SOFT_KILL)
    Terminate gui connections
    send SHUTDOWN to REM TM 7
    blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
    WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c   13116]
    NiBufIAlloc: malloc wp ca_blk, to 14 bytes
    ALLOC local ca_blk 10001 (len 14)
    return errno (-17) to T7
    errormsg without overhead: take mode 0
    FREE local ca_blk 10001 (len 14)
    try to send 14 to M0
    NiBufSend starting
    NiIWrite: hdl 4 sent data (wrt=14,pac=1,MESG_IO)
    set status of T7 to TM_DISCONNECTED
    NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
    SiSelNSet: set events of sock 1556 to: ---
    NiBufISelRemove: remove hdl 4 from set0
    SiSelNRemove: removed sock 1556
    NiSelIRemove: removed hdl 4
    DpDelSocketInfo: del info for socket 4 (type=3)
    NiICloseHandle: shutdown and close hdl 4 / sock 1556
    NiBufIClose: clear extension for hdl 4
    dp_tm_adm[7].stat = DP_SLOT_FREE
    DpAMCancel: new state of T7/M0 = 0x19
    DpAMCancel: set status of M0 to MODE_CANCEL
    DpAMCancel: new state of T7/M7 = 0x8
    DpAMCancel: set status of M7 to MODE_CANCEL
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 39)
    wake_evt_udp_now 1, no dgram needed
    created LOGOFF request for T7 U8 M0 !!
    wait for end of work processes
    [DpWpDied] W0 handle not set (PID:5072)
    [DpWpDied] W1 handle not set (PID:3868)
    [DpWpDied] W2 handle not set (PID:5148)
    [DpWpDied] W3 handle not set (PID:5004)
    [DpWpDied] W4 handle not set (PID:1640)
    [DpWpDied] W5 handle not set (PID:4780)
    [DpWpDied] W6 handle not set (PID:4108)
    wait for end of icman
    [DpProcDied] Process lives  (PID:5208  HANDLE:1636)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1657
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Oct 27 07:46:13 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:5208  HANDLE:1636)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1657
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Oct 27 07:46:14 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:5208  HANDLE:1636)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1657
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Oct 27 07:46:15 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:5208  HANDLE:1636)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1657
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Oct 27 07:46:16 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:5208  HANDLE:1636)
    DpStartStopMsg: send stop message (myname is >UKCL515803_NSP_00                       <)
    NiIMyHostName: hostname = 'UKCL515803'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Tue Oct 27 07:46:17 2009
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11976]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 1584 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 1584 (pos=2)
    SiSelNRemove: removed sock 1584
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
    WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c   13116]
    NiBufIAlloc: malloc wp ca_blk, to 356 bytes
    ALLOC local ca_blk 10001 (len 356)
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 42)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 1584
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 4808) [dpxxdisp.c   10333]
    Good Bye .....

    Hi Sunny,
    Thanks for the reply. I checked NETSTAT command and none of the known ports used by SAP is occupied on my laptop.
    Also, when I use NIPING - it gies me a familiar message WASNOTREACHED...
    I have also attached my IPCONFIG /ALL Output, if somebody could help further.
    Windows IP Configuration
             1.0.0.127.in-addr.arpa
             Record Name . . . . . : 1.0.0.127.in-addr.arpa.
             Record Type . . . . . : 12
             Time To Live  . . . . : 600511
             Data Length . . . . . : 4
             Section . . . . . . . : Answer
             PTR Record  . . . . . : localhost
             localhost
             Record Name . . . . . : localhost
             Record Type . . . . . : 1
             Time To Live  . . . . : 600511
             Data Length . . . . . : 4
             Section . . . . . . . : Answer
             A (Host) Record . . . : 127.0.0.1
    C:\Documents and Settings\utxk13>ipconfig /all
    Windows IP Configuration
            Host Name . . . . . . . . . . . . : UKCL515803
            Primary Dns Suffix  . . . . . . . : drink.brew.beer
            Node Type . . . . . . . . . . . . : Hybrid
            IP Routing Enabled. . . . . . . . : No
            WINS Proxy Enabled. . . . . . . . : No
            DNS Suffix Search List. . . . . . : sn.brew.beer
                                                brew.beer
                                                drink.brew.beer
                                                scottishcourage.com
                                                scottish-newcastle.co.uk
                                                ghodom1.scottish-newcastle.co.uk
                                                heiway.net
                                                nl.heiway.net
    Ethernet adapter Wireless Network Connection:
            Media State . . . . . . . . . . . : Media disconnected
            Description . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
            Physical Address. . . . . . . . . : 00-22-FA-57-5E-D4
    Ethernet adapter Local Area Connection:
            Connection-specific DNS Suffix  . : drink.brew.beer
            Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Co
    nection
            Physical Address. . . . . . . . . : 00-26-55-11-C8-04
            Dhcp Enabled. . . . . . . . . . . : Yes
            Autoconfiguration Enabled . . . . : No
            IP Address. . . . . . . . . . . . : 10.10.210.204
            Subnet Mask . . . . . . . . . . . : 255.255.254.0
            Default Gateway . . . . . . . . . : 10.10.210.1
            DHCP Server . . . . . . . . . . . : 10.10.160.167
            DNS Servers . . . . . . . . . . . : 10.10.160.38
                                                10.10.236.10
            Lease Obtained. . . . . . . . . . : 27 October 2009 08:10:17
            Lease Expires . . . . . . . . . . : 31 October 2009 08:10:17
    Ethernet adapter Local Area Connection 3:
            Connection-specific DNS Suffix  . :
            Description . . . . . . . . . . . : Microsoft Loopback Adapter
            Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
            Dhcp Enabled. . . . . . . . . . . : No
            IP Address. . . . . . . . . . . . : 10.10.0.10
            Subnet Mask . . . . . . . . . . . : 255.255.255.0
            Default Gateway . . . . . . . . . :
    Regards
    Tushar Kansara

  • Installation Procedure for SAP Netweaver 2004 Trial ABAP Version

    Hi,
    I am new to ABAP, and want to Install SAP Netweaver 2004 Trial ABAP Version on my system. I downloaded the software from SDN. If any one knows the Installation Preocedure, please send me it will be very helpful for me.
    Regards,
    Mithun Birabinth.

    Please check the SMP:
    http://service.sap.com/instguides & navigate accordingly.
    PS:
    Award points if your question is resolved.

  • Error Install SAP Netweaver ABAP Trial Version 7.01

    Hello everyone,
      I'm trying to install SAP Netweaver ABAP Trial Version 7.01.
      My operating system is Windows XP Professional.
      I have 3 GB of RAM and 80 GB of free space.
       Unfortunately, the installation process is stuck in:
       Phase 18 of 27
       Import Monitor jobs: running 3, waiting 20, completed 5, failed 0, total 28.
       In log files there is no error.
       However, after 3 hours the installation stops.
       Can anyone help please?
    Regards,
    Viviane

    Hi all,
    Unfortunately I don't have this directory after the error of installation.
    I have the following directories:
    C: \ usr \ sap \ NSP \ DVEBMGS00
    C: \ usr \ sap \ NSP \ SYS
    C: \ usr \ sap \ NSP \ tmp
    NSP = SID
    I looked for errors in the log files but not found. Below is the log file import_monitor.log
    INFO: 2010-03-16 21:05:31
    Import Monitor is started.
    CONFIG: 2010-03-16 21:05:31
    Application options:
    dbCodepage=4103
    dbType=ADA
    extFiles=no
    importDirs=C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1;C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP2;C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP3
    installDir=C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL
    jobNum=3
    loadArgs=-nolog -c 50000
    monitorTimeout=30
    orderBy=
    r3loadExe=C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe
    sapinst=
    trace=all
    tskFiles=yes
    CONFIG: 2010-03-16 21:05:31
    List of packages with table structure: 'SAP0000'.
    CONFIG: 2010-03-16 21:05:31
    List of packages with views: 'SAPVIEW'.
    TRACE: 2010-03-16 21:05:31 com.sap.inst.migmon.imp.ImportStandardTask preCreate
    Parse of 'C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL' template file is started.
    INFO: 2010-03-16 21:05:31 com.sap.inst.migmon.imp.ImportStandardTask preCreate
    Parse of 'C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL' template file is successfully completed.
    Primary key creation: before load.
    Index creation: after load.
    INFO: 2010-03-16 21:05:32
    Data codepage 4103 is determined using TOC file 'C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\ATAB.TOC' for package 'ATAB'.
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask run
    Loading of 'REPOSRC' import package is started.
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'REPOSRC' import package:
    C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\REPOSRC.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" REPOSRC.TSK ADA -l REPOSRC.log
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask run
    Loading of 'DOKCLU' import package is started.
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'DOKCLU' import package:
    C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\DOKCLU.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" DOKCLU.TSK ADA -l DOKCLU.log
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSSEXC_1' import package is started.
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPSSEXC_1' import package:
    C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\SAPSSEXC_1.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" SAPSSEXC_1.TSK ADA -l SAPSSEXC_1.log
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'DOKCLU' import package into database:
    C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i DOKCLU.cmd -dbcodepage 4103 -l DOKCLU.log -nolog -c 50000
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'REPOSRC' import package into database:
    C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i REPOSRC.cmd -dbcodepage 4103 -l REPOSRC.log -nolog -c 50000
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPSSEXC_1' import package into database:
    C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC_1.cmd -dbcodepage 4103 -l SAPSSEXC_1.log -nolog -c 50000
    INFO: 2010-03-16 21:15:34 com.sap.inst.migmon.LoadTask run
    Loading of 'DOKCLU' import package is successfully completed.
    TRACE: 2010-03-16 21:16:02 com.sap.inst.migmon.LoadTask run
    Loading of 'SMIMCONT1' import package is started.
    TRACE: 2010-03-16 21:16:02 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SMIMCONT1' import package:
    C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\SMIMCONT1.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" SMIMCONT1.TSK ADA -l SMIMCONT1.log
    TRACE: 2010-03-16 21:16:29 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SMIMCONT1' import package into database:
    C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i SMIMCONT1.cmd -dbcodepage 4103 -l SMIMCONT1.log -nolog -c 50000
    Below the log file import_monitor.java
    java version "1.4.2_19"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_19-b04)
    Java HotSpot(TM) Client VM (build 1.4.2_19-b04, mixed mode)
    Import Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
    Import Monitor jobs: running 2, waiting 26, completed 0, failed 0, total 28.
    Import Monitor jobs: running 3, waiting 25, completed 0, failed 0, total 28.
    Loading of 'DOKCLU' import package: OK
    Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.
    Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.
    Below the 'last log file created before the abrupt interruption of the installation:
    File name: SMIMCONT1.log

Maybe you are looking for