Problems when load testing a cluster on CSS11501

Hello there,
I have the following setup:
INTERNET <--> CSS11501 <----> SERVER CLUSTER
Vlan address of server cluster is in the same subnet of that of the CSS. server's gateway is IP of CSS. My problem is when we do load testing on each server, it goes well with no errors. but when we do the load testing using the VIP address of the cluster, the load testing app gets a timeout when getting the flash content of the cluster.
my config on the content is:
content BGUIDE_NEW
vip address 192.168.8.4
protocol tcp
port 80
balance leastconn
advanced-balance sticky-srcip
add service SRV1
add service SRV2
add service SRV3
add service SRV4
active
Is there anything lacking in my content config that I need to do? Where else in the config do I need to look at.
Thanks in advanced.
JC

Testing tool is outside the subnet/network. Only the particular file cannot be loaded. I haven't used any sniffer programs yet. Should I install it on one of the server in the cluster? What do I look for on the trace.
Sorry about this. I haven't used sniffer programs yet.
Thanks

Similar Messages

  • Problem when loading from ODS to the CUBE

    Hi Experts,
    I am facing an unusual problem when loading data from ODS to the cube.
    I have a first level ODS where the delta postings are updated. I have checked the active table of the ODS and the data is accurate.
    I have deleted the entire data from the Cube and trying to do a full load from ODS to the CUBE.
    I am sure when I run a full load the data goes from Active table of the ODS.
    After the full load the the keyfigure values are 0. I have tried doing the testing by loading couple of sales documents and still the keyfigure values are 0.
    I wonder when I load the full. The data should be picked exactly the way it is in active table of the ODS.
    I also dont have any fancy routines in the update rules.
    Please help me in this regard.
    Regards
    Raghu

    Hi,
    Check the procedure did u do that exactly or not. just follow the the laymen steps here:... and let me know ur issue
    o     First prepare a flat file in Microsoft excel sheet for master data and transaction data and save it in .CSV format and close it.
    o     First select info objects option and create info area then create info object catalog then char, & key figure. Then create ‘id’ in Char, Name as attribute activate it then in key figures create no and activate it.
    o     In info sources create application component then create info source with direct update for master data and flexible update for transaction data. The flat files would be created for master data create info package and execute it.
    o     For transaction data go to info provider then select the file right click on it then select option create ODS object. Then a new screen opens give the name of the ODS and create other screen opens then drag character to key fields.
    o     Activate it then update rules it will give error to it then go to communication structure and give 0Record mode then activate it then go to update rules it will activate it.
    o     Then go to info source then create info package then external data then processing update, Data targets then the scheduling then click start then the monitor.
    o     Then other screen opens there we can see if we doesn’t able to see the records then come back to the info provider right click on it then other screen opens then select the option activate data in ODS then a screen opens.
    o     so select the option QM where it would be in a yellow co lour then by double click then another screen opens then select green color option then click continue it and it comes to the previous screen then select the option and click save it would be underneath of it just click it up and close it.
    o     Then come back to the main screen to the info source to the info package go to the package and right click on it then a screen opens then click schedule without distributing any of the tab directly click the monitor tab. Then refresh it until the records come to the green.
    o     Once it is green the click the data target and see the file executed.
    o     Now go to the info provider then a right click on the file name then create info cube. Then a new screen opens and gives the name and activates it. The drag the key figures to the other side, time characteristics to the other side, and chacetristics to the other side.
    o     Then create the dimension table then assign it and activate it .Then go to file name right click on it then select the option create update rules select ODS option and give the file name and activate it .
    o     Then come back to the main screen and refresh it. Whenever you see 8 file names you will know that it is undergoing the data mart concept.
    o     In the main screen click ODS file right click then a pop up screen opens select the option update ODS data target. Then another screen opens in that we are able to see 2 options full update, initial update then select initial update.
    o     Then another screen opens info Package there the external data , data targets , scheduler select the option later in background option then a another screen opens just click immediate then click save automatically it closes then click start option.
    o     Then select monitor option then the contents then the field to be elected then the file to be executed.
    regards
    ashwin

  • How to monitor Http Request and Response when load testing is going on

    Hi,
    can any one please let me know how to monitor http request sent and response received for each virtual ID when a load test is going on ?
    Thanks,

    You used to be able to see what the VUs "see" using the "VU Monitor" (it would only do a simple rendering of the HTML but it served it's purpose). However this was replaced (in v12 I think?) by the "VU Log". While this offers simlilar functionality, I have had problems getting to see the same level of detail. You may need to use the "debug" modes. Also check the "Content" tab within the VU Logs (it is the closest equivalent to the HTML you would see in the responses in the old VU Monitor).

  • Our application timeout when load testing after upgrading to OEL 4.8

    Hi,
    We recently have an upgrade from OEL 4.7 to OEL 4.8. Our application is running fine on OEL 4.7, but since after upgraded to OEL 4.8, it fails pretty frequently with timeout error when doing load testing (20+ users).
    Any ideas what can be the possible causes?
    Please advise.
    Thanks
    -Mina

    You're not giving much info.
    If it is networking related, the first think i would check is to make sure the network interface is configured properly. For instance, if your computer's NIC is set to auto and your network port on the network switch is set to fixed, then you will drop packages at high load due to errors on the interface. Those errors cannot be seen from the switch. Set both to auto or fixed, but it needs to be set to the same. Auto is standard and should work unless you have some strange equipment. Also replace the networking cable with a new one.

  • FindVOsWithEntityUsage error when load testing

    Our application appears to be having issues with activation/passivation of stateful views under heavy load testing. We have changed all the other pages to be stateless where possible yet still appear to freeze up after encountering one or more BC4J errors typically starting with findVOsWithEntityUsage(ApplicationModuleImpl.java).
    Has anyone else run into this problem? This appears to happen after 2-5 hours of load / stress testing with SoftLight's SiteTool Loader.
    Thanks in advance
    Tom

    Hi Luke,
    The issue is resolved based on the suggestion in another thread. Our basis stoped and started the OrgChart service in NWCE, and it did work.
    Here's the thread: Export to PowerPoint
    Thanks,
    Hongling

  • I'm receiving the following problem when load firefox 5.0 The NTVDM CPU has encountered an illegal instruction

    I'm receiving the follow message when loading firefox 5.0
    The NTVDM CPU has encountered an illegal instruction

    Make sure that you do not run Firefox in compatibility mode.<br />
    You can open the Properties via the right-click context menu of the Firefox desktop shortcut and check that in the "Compatibility" tab.<br />
    Make sure that all items are deselected in the "Compatibility" tab of the Properties window.<br />

  • Delta Update Problem when loading to Cube

    Dear all.
    Scenario:
    DataSources 2LIS_18_NOTIF and 2LIS_18_I0TASK are extracted to ODS Daily which is a Delta Update.Weekly once they are updated to cube which is also Delta Update.This is automated by a process chain.
    DataSource 2LIS_18_NOTIF failed on 27.07.2005 which we did not notice.Datasource 2LIS_18_IOTASK is fine.I did a repeat delta for 2LIS_18_NOTIF which is successful.Data upto ODS is fine.
    Now the problem is loading data from ODS to cube which is Delta Update to be loaded every week.There are some Update rules written in which <b>sy-datum</b> is used.
    Proposed Solution:
    Change sy-datum for every monday date and do the delta update for 7 2LIS_18_I0TASK requests and 1  2LIS_18_NOTIF request.Delete the request from Cube,to remove delta management for 2LIS_18_NOTIF request.Now load for second week with 7 2LIS_18_I0TASK requests and the same 2LIS_18_NOTIF.Do this for all weeks and finally reconstruct all the requests which are deleted from cube.
    if i follow the above approach can there be any Data inconsistency?
    please help me to resolve this issue.
    Regards
    Ravi.

    Hi Ravi,
    If you are going to make a code change, which it looks like you are going to do, then I would suggest the following:
    - Create an InfoObject called ZMondayd. Define is a type date, and allow master data.
    - Input in the date you want your update rules to use
    - In the update rule, change the code to read the value from the InfoObject, not sy-datum.
    - Load your data.
    I would also set up a process to update the InfoObject on a weekly basis to hold the date that you want. By using this method, if for some reason or another this process fails, you do not have to make any code changes, just maintain the InfoObject with the correct date, and reload the data.
    Cheers! Bill

  • Problem when load more swf files work with xml files into my movie

    hi ;
    I have one flash file & more of swf files which work with xml files .
    when I load one swf file into my flash file  and remove it and load anther one on the same movieclip in my flash file it load the old swf file.
    when i load one on movieclip and remove it and load anther swf  on anther movieclip the file doesn`t work  and stoped.
    when test my flash file to load and remove swf files without xml file it work fine but when repleaced the swf files with other work with xml files the problem hapend.
    thanks;

    YOu should trace the names of the files that are being targeted for loading to see if they agree with what you expect.  If you want help with the coding you will need to show the code that is relevant to your problem (not all of it)

  • Problem when clustering with O Cluster

    Dear all ,
    i have the following error when trying to build a clustering model on my data. I used O cluster with the default settings. The strange thing is i have have created a build before for the same data and on the same machine and it worked fine. what could be wrong ? The error description says a memory problem but my settings have not changed since last time.
    here is the complete error desciption
    Server task state: error
    Server task detail:
    ORA-40101: Data Mining System Error ORA-40101: Data Mining System Error ORA-40101: Data Mining System Error ODM_OC_CLUSTERING_MODEL-BUILD_OC.build_ocluster--20010
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
    ORA-06512: at "DMSYS.ODM_OC_CLUSTERING_MODEL", line 122
    ORA-06512: at "DMSYS.ODM_OC_CLUSTERING_MODEL", line 2408
    ORA-40101: Data Mining System Error ODM_OC_CLUSTERING_MODEL-BUILD_OC.ocluster--20010
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
    ORA-06512: at "DMSYS.ODM_OC_CLUSTERING_MODEL", line 122
    ORA-06512: at "DMSYS.ODM_OC_CLUSTERING_MODEL", line 2312
    ORA-06500: PL/SQL: storage error
    ORA-04030: out of process memory when trying to allocate 16396 bytes (koh-kghu call ,pmucalm coll)
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
    ORA-06512: at "DMSYS.ODM_OC_CLUSTERING_MODEL", line 122
    ORA-06512: at "DMSYS.ODM_OC_CLUSTERING_MODEL", line 2408
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
    ORA-06512: at "DMSYS.ODM_OC_CLUSTERING_MODEL", line 122
    ORA-06512: at "DMSYS.ODM_OC_CLUSTERING_MODEL", line 2312
    ORA-06512: at "DMSYS.DBMS_DATA_MINING", line 30--
    Many thanks
    Lamia Abo zaid

    hi ,
    In this scenario u can use the load balancer instead of fail over clustering .
    I would suggest u to create apache proxy for redirect the request for many jboss instance.
    Rgds
    kathir

  • Installation problem when loading Photoshop from Creative cloud.  PS runs for about 5-9 seconds then it crashes with a standard windows app going down message

    I have installed PS from the cloud twice now.  It loaded without any errors but when I try to run it, it comes up fine with all the dialogs and everything but after 5 seconds it tells me the app is closing down without giving any error message.

    I tried loading as admin and this did not work.  I have added two images that show the error message and my computer configuration.  I am running Norton Antivirus, could this be the problem?
    I am running two other editing programs Flexi and Adobe Illustrator, other than that it is a new system running standard programs.

  • Problem when loading pdf files from Shared Content

    When I load pdf files from Shared Content, I got the following problem: "The selected document could not be retrieved, please try uploading the document again."
    Anyone knows this?
    Thank you very much in advanced.

    I don't migrated the program, but installed it from the original installer,
    i. e. I first installed Indesign from backup, and then uninstalled it and
    reinstall  clean from Adobe.
    What a plug-in or utility converts page from InDesign to PDF?
    2014-08-10 22:51 GMT+04:00 Peter Spier <[email protected]>:
        problem with exporting PDF files from InDesign CS5  created by Peter
    Spier <https://forums.adobe.com/people/P+Spier> in InDesign - View the
    full discussion <https://forums.adobe.com/message/6627440#6627440>

  • Cache problem when loading modules ?

    Hello Flex friends !
    I am currently experiencing a strange problem. It happens in
    my production environment when using my web browser to access the
    application. Here it is :
    The main application is a menu on the left and a ModuleLoader
    in the center. Regarding the menu's button I click, the
    ModuleLoader will load either ModuleA, ModuleB, etc ... nothing's
    special until then, everything works fine.
    Then I update the ModuleA.swf and Module.swf files. Now when
    I click the menu's button I get the old ModuleA and ModuleB.
    This seems to be a cache problem, no ? I thought the browser
    was going to compare the local ModuleA version and the server
    ModuleA version and then load the server ModuleA version, but it
    does not seem to work this way. So How does it work ? I'd like to
    understand.
    Thanks for your help guys !
    Olivier

    Hi,
    Try this.
    Step 1:  Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
    queue thats under outbound processing and click on display the IDOC which is on the menu bar.
    Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
    place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
    (Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
    Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
    to the particular TRFC request for that Idoc.
    OR
    Directly go to SM58 > Give * / user name or background  (Aleremote) user name and execute. It will show TRFCs to be executed
    for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
    EDIT ---> Execute LUW
    Thanks,
    JituK

  • I am getting a proxy problem when loading or a does not recognize problem

    I find that my Firefox is VERY slow. And lately all I can get is a message about proxy server is refusing connection. I found out where I can change proxy server..but I click on "no proxy" hit OK and then it goes right back to saying that I have one! Today I kept getting a message about not being able to find mozilla...and said "they" do not know why.
    I find that off and on I can get on line with Firefox..but then I cannot AGAIN. I am on line now, but not sure how much longer I will be able. Frustrating. I haven't done anything lately to computer except adding a new hard drive which was done way after the problems started! What am I doing wrong?
    Thanks for help

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * [[Firefox cannot load websites but other programs can]]

  • Problem when loading the form in workspace  ( LCES2  v9)

    Hey,
    I have a problem with some process .Each time I try to invoke it through the workspace I get this error (ALC-WKS-007-040).
    This is what I found in the server log .
    15:21:09,133 INFO  [STDOUT] [LCDS][ERROR] Exception when invoking service 'remoting-service': flex.messaging.MessageException: ALC-WKS-005-028: A problem occurred in the Render Service.  Please review the render orchestration for this process.
      incomingMessage: Flex Message (flex.messaging.messages.RemotingMessage)
        operation = render
        parameters = [1FBED60E-CEFF-102D-B474-0000B88028EB, 503, 0, ASObject(519082525){acroClientType=, acrobatVersion=10}]
        clientId = E72502C6-A32E-5892-86F5-D3F3E21E0A9D
        destination = task-actions
        messageId = 1D1F80DC-242B-43D2-4499-0427FB490F03
        timestamp = 1292854869075
        timeToLive = 0
        body = null
        hdr(DSId) = E716F344-070B-158E-7EC5-BDC42A0017A6
        hdr(DSEndpoint) = workspace-polling-amf
      Exception: flex.messaging.MessageException: ALC-WKS-005-028: A problem occurred in the Render Service.  Please review the render orchestration for this process.
            at com.adobe.workspace.AssemblerUtility.createMessageException(AssemblerUtility.java:409)
            at com.adobe.workspace.tasks.TaskActions.render(TaskActions.java:764)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at flex.messaging.services.remoting.adapters.JavaAdapter.invoke(JavaAdapter.java:421)
            at flex.messaging.services.RemotingService.serviceMessage(RemotingService.java:183)
            at flex.messaging.MessageBroker.routeMessageToService(MessageBroker.java:1406)
            at flex.messaging.AsyncMessageBroker.routeMessageToService(AsyncMessageBroker.java:571)
            at flex.messaging.endpoints.AbstractEndpoint.serviceMessage(AbstractEndpoint.java:1005)
            at flex.messaging.endpoints.amf.MessageBrokerFilter.invoke(MessageBrokerFilter.java:103)
            at flex.messaging.endpoints.amf.LegacyFilter.invoke(LegacyFilter.java:158)
            at flex.messaging.endpoints.amf.SessionFilter.invoke(SessionFilter.java:44)
            at flex.messaging.endpoints.amf.BatchProcessFilter.invoke(BatchProcessFilter.java:67)
            at flex.messaging.endpoints.amf.SerializationFilter.invoke(SerializationFilter.java:165)
            at flex.messaging.endpoints.BaseHTTPEndpoint.service(BaseHTTPEndpoint.java:293)
            at flex.messaging.MessageBrokerServlet.service(MessageBrokerServlet.java:364)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
            at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:290)
            at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
            at com.adobe.workspace.events.RemoteEventClientLifeCycle.doFilter(RemoteEventClientLifeCycle .java:138)
            at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:235)
            at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
            at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
            at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:235)
            at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
            at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
            at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
            at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.ja va:179)
            at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
            at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
            at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
            at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java: 157)
            at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
            at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
            at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
            at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.ja va:583)
            at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
            at java.lang.Thread.run(Thread.java:619)
    Caused by: ALC-DSC-012-000: com.adobe.idp.dsc.registry.ServiceNotFoundException: Service: Default Render ES Update1 not found.
            at com.adobe.idp.taskmanager.dsc.service.TaskManagerServiceImpl.renderForm(TaskManagerServic eImpl.java:4468)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
            at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
            at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
            at com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept(DocumentPassi vationInterceptor.java:53)
            at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
            at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
            at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:357)
            at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doRequiresNew (EjbTransactionCMTAdapterBean.java:299)
            at sun.reflect.GeneratedMethodAccessor639.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
            at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:237)
            at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:158)
            at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:169)
            at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
            at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
            at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:404)
            at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
            at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
            at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
            at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:138)
            at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
            at org.jboss.ejb.Container.invoke(Container.java:960)
            at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
            at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
            at $Proxy376.doRequiresNew(Unknown Source)
            at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:143)
            at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
            at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
            at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
            at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
            at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
            at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
            at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:165)
            at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
            at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
            at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
            at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121)
            at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)
            at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:93)
            at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:19 8)
            at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:66)
            at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
            at com.adobe.idp.taskmanager.dsc.client.TypedTaskManagerService.invokeWithRetry2(TypedTaskMa nagerService.java:159)
            at com.adobe.idp.taskmanager.dsc.client.TypedTaskManagerService.invokeWithRetry(TypedTaskMan agerService.java:147)
            at com.adobe.idp.taskmanager.dsc.client.TypedTaskManagerService.callRenderService(TypedTaskM anagerService.java:1441)
            at com.adobe.workspace.tasks.TaskActions.render(TaskActions.java:731)
            ... 38 more
    Informations :
    I use Livecycle ES Version 9
    workbench 9.5
    and my process is long-lived
    I would be very grateful if you can tell me or offer me a solution to overcome this problem.
    Naoufal FAHEM

    Caused by: ALC-DSC-012-000: com.adobe.idp.dsc.registry.ServiceNotFoundException: Service: Default Render ES Update1 not found.
    This likely means you copied an older ES Update 1 process into your ES2 environment and did not do a migration.  There is a new set of Render and Submit processes for ES2 and your older process is referencing the set shipped with ES Update1. 
    Ideally, if you are trying to have a pure ES2 environment, then you should convert your processes to be ES2 processes (I believe there are docs to help with this) - I recommend this as it puts you in a cleaner position for future migrations. 
    But if you choose to keep it using the older Render and Submit processes, then you need to deploy the adobe-process-management-system.lca from the ES Update 1 environment.  You would do this in the Adminui where LCAs are deployed, but make sure you choose the LC8 LCA tab.
    Hope this helps.
    Jon

  • Problem when loading xml file using sql loader

    I am trying to load data into table test_xml (xmldata XMLType)
    i have an xml file and i want whole file to be loaded into a single column
    when i use the following control file and executed from command prompt as follows
    sqlldr $1@$TWO_TASK control=$XXTOP/bin/LOAD_XML.ctl direct=true;:
    LOAD DATA
    INFILE *
    TRUNCATE INTO TABLE test_xml
    xmltype(xmldata)
    FIELDS
    ext_fname filler char(100),
    xmldata LOBFILE (ext_fname) TERMINATED BY EOF
    BEGIN DATA
    /u01/APPL/apps/apps_st/appl/xxtop/12.0.0/bin/file.xml
    the file is being loaded into table perfectly.
    unfortunatley i cant hardcode file name as file name will be changed dynamically.
    so i removed the block
    BEGIN DATA
    /u01/APPL/apps/apps_st/appl/xxtop/12.0.0/bin/file.xml
    from control file and tried to execute by giving file path from command line as follows
    sqlldr $1@$TWO_TASK control=$XXTOP/bin/LOAD_XML.ctl data=/u01/APPL/apps/apps_st/appl/xxtop/12.0.0/bin/file.xml direct=true;
    but strangely it's trying to load each line of xml file into table instead of whole file
    Please find the log of the program with error
    Loading of XML through SQL*Loader Starts
    SQL*Loader-502: unable to open data file '<?xml version="1.0"?>' for field XMLDATA table TEST_XML
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: No such file or directory
    SQL*Loader-502: unable to open data file '<Root>' for field XMLDATA table TEST_XML
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: No such file or directory
    SQL*Loader-502: unable to open data file '<ScriptFileType>' for field XMLDATA table TEST_XML
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: No such file or directory
    SQL*Loader-502: unable to open data file '<Type>Forms</Type>' for field XMLDATA table TEST_XML
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: No such file or directory
    SQL*Loader-502: unable to open data file '</ScriptFileType>' for field XMLDATA table TEST_XML
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: No such file or directory
    SQL*Loader-502: unable to open data file '<ScriptFileType>' for field XMLDATA table TEST_XML
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: No such file or directory
    SQL*Loader-502: unable to open data file '<Type>PLL</Type>' for field XMLDATA table TEST_XML
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: No such file or directory
    SQL*Loader-502: unable to open data file '</ScriptFileType>' for field XMLDATA table TEST_XML
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: No such file or directory
    SQL*Loader-502: unable to open data file '<ScriptFileType>' for field XMLDATA table TEST_XML
    please help me how can i load full xml into single column using command line without hardcoding in control file
    Edited by: 907010 on Jan 10, 2012 2:24 AM

    but strangely it's trying to load each line of xml file into table instead of whole fileNothing strange, the data parameter specifies the file containing the data to load.
    If you use the XML filename here, the control file will try to interpret each line of the XML as being separate file paths.
    The traditional approach to this is to have the filename stored in another file, say filelist.txt and use, for example :
    echo "/u01/APPL/apps/apps_st/appl/xxtop/12.0.0/bin/file.xml" > filelist.txt
    sqlldr $1@$TWO_TASK control=$XXTOP/bin/LOAD_XML.ctl data=filelist.txt direct=true;

Maybe you are looking for

  • Creating a Scheduled Task using PowerShell v4

    So here is my question.  I'm trying/wanting to create a scheduled task using PowerShell v4 on Server 2012R2.  I want to task to run on the 1st day of every month.  The parameter for -Monthly -Day is not available.  I need to use PowerShell to create

  • Photoshop CS5 is unable to find the JavaScript plug-in.

    I have been trying to run a number of actions in CS5 (Windows 7) and keep getting the error "Could not complete the command because Photoshop was unable to find the JavaScript plug-in."   It does this with an action that was designed for me to put th

  • Canoe Event Handling in Labview

    Anybody worked on handling the events of CANoe in Labview? I am trying to handle the event when there is a value change in the environment variable of CANoe. CANoe provides a COM method "OnChange" but i do not know how to implement this method in Lab

  • About  moving average price

    for example,the current period is Feb,but i change moving pricing in Jan,now moving price is blank in Feb,how can i copy that price of Jan to Feb?

  • Error in connecting to iCloud from Yosemite.

    I recently upgraded to OS 10.10.2. I cannot access accounts on Mail or iCloud settings in System Preferences. When asked to sign into my iCloud account in System Preferences with the correct password, the following messages appears:      "Account Det