Problems when scrubbing through timeline with live update on

Hey guys! I have a problem. Sometimes when I scrub through my timeline in AE with live update on and I try to get to a frame that hasn't been rendered yet, AE freaks out. On my windows taskbar, multiple instances of AE seem to populate the taskbar (although none of them are selectable) and the screen flashes in between my desktop BG and AE. Any thoughts? thanks!

Check the Event Viewer for the exact cause of the crashes. sounds like the same old driver crashes, which could be your graphics card or another component on your system like audio devices. Also verify your device manager for any devices that may be flagged and repair their drivers. This can go down to trivial things like your SATA controlelr driver or the temperature monitoring of the chip sending wrong signals when it supposedly gets too hot...
Mylenium

Similar Messages

Problems with Live Update 2

Whenever the system starts up, I get several errors stating, "the service was not started".
Unfortunately, it doesn't state what service (although it's obviously related to Live Update because the bl**dy thing won't work) & it's not immediately evident (to me, at least) which of the plethora of un-started services I need to start to correct it.
Anyone else had this & know how to correct it?

Alright, this is really getting on my t*ts!
I haven;t changed anything &, following a re-boot, I'm now getting the "service was not started" error again once I log into Windows.
When I try to run Live Update, it gives me the same error but does actually produce the IE window, although the options for Live BIOS & Live Driver are missing (the others are still there but don't work).
I've even started EVERY service in Control Panel & I still get the same, so I'm assuming it's not so much a "service is not started", but more like a "service does not exist". If this is the case, what is the service & how do I get it back? Why doesn't re-installing Live Update solve the problem?

Still the same problem with Live update 2

I still have the same problem with Live update 2.
I've downloaded newer Bios update but it's 13 MB... it's obvious that I can not have
in floppy disk and I'm a little bit uncomfortable of updating bios from CD-rom .
But what else can I do, besides updating Bios to get out of this Live update from start-up.
Should I clear CMOS?

13mb are you really sure ?
go here instead.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=436&kind=1
the download file is around 300kb.
make sure you get the right file.
you did not specify if you got L or ILRS.
also dont use live update.
get drivers from http://www.nvidia.com instead.

AE CC 2014 memory usage continually rises while scrubbing through timeline

When scrubbing through the time line in AE CC 2014 ver 13.0.0.214 memory usage just increases until there is none left and everything starts to lock up. Purging does not return usage to normal.
I'm on Win 7 Pro 64bit(fully updated)
32 Gig RAM
i7-3970X @3.5 GHz
This only seems to have started happening fairly recently.

I too am getting serious memory issues with CC 2014 vs CC 2013 doing the exact same tasks. Not sure why, but the default settings for previews, disk cache, and memory seem to give me the best performance. So basically...
don't enable Disk Cache
leave the GPU texture memory at 1500MB (Previews -> GPU Information)
left "RAM reserved for other applications" at 6 GB (in a 32 GB system)
don't check "Reduce cache size when system is low on memory"
don't check "Render Multiple Frames Simultaneously"
My system...
Win 8.1 64-bit
Six core i7-4930K @ 3.40Ghz
32 GB RAM (DDR3 2133MHz CL9)
Nvidia GeForce GTX 770 4GB
Samsung SSD 840 EVO 250GB (Win 8.1 and installed programs drive)
WD Black 3TB 7200RPM (data drive)

Having a problem when scrolling through one clip: a different clip scrolls through point and time simultaneously. Can you please assist us?

Having a problem when scrolling through one clip: a different clip scrolls through point and time simultaneously. Can you please assist us?

First question: this is a Captivate forum, are you sure that you have a Captivate problem (with cpvc or an imported video)?

No audio when scrubbing through clips

Out of the blue, i find i'm no longer about to hear the audio when scrubbing through clips either using the cursor or the left-right arrow keys. I can hear the audio find when playing the clip at normal speed, but when i scrub through the clip or play it one frame at a time using the left or right arrow keys I get know audio. This problem occurs on all sequences, even for old projects that have been edited previously where i was able to scrub through the clips. I've looked at all my user preferences and project preferences and i don't see any setting that would seem to affect the audio scrubbing. any help that you can provide would be greatly appreciated.

Thanks Didn't see that option. Much appreciated.
But it is there:-)
See the bottom of this grab:
!http://i533.photobucket.com/albums/ee340/gogiangigo/Picture1-8.png!

ORA-00600 problem when create XMLType table with registerd schema

Hi,
I am using Oracle9i Enterprise Edition Release 9.2.0.4.0 on RedHat Linux 7.2
I found a problem when I create table with registered schema with follow content:
     <xs:element name="body">
          <xs:complexType>
               <xs:sequence>
               </xs:sequence>
               <xs:attribute name="id" type="xs:ID"/>
               <xs:attribute name="class" type="xs:NMTOKENS"/>
               <xs:attribute name="style" type="xs:string"/>
          </xs:complexType>
     </xs:element>
     <xs:element name="body.content">
          <xs:complexType>
               <xs:choice minOccurs="0" maxOccurs="unbounded">
                    <xs:element ref="p"/>
                    <xs:element ref="hl2"/>
                    <xs:element ref="nitf-table"/>
                    <xs:element ref="ol"/>
               </xs:choice>
               <xs:attribute name="id" type="xs:ID"/>
          </xs:complexType>
     </xs:element>
Does Oracle not support element reference to other element with dot?
For instance, body -> body.content
Thanks for your attention.

Sorry, amendment on the schema
     <xs:element name="body">
          <xs:complexType>
               <xs:sequence>
                    <xs:element ref="body.head" minOccurs="0"/>
                    <xs:element ref="body.content" minOccurs="0" maxOccurs="unbounded"/>
                    <xs:element ref="body.end" minOccurs="0"/>
               </xs:sequence>
               <xs:attribute name="id" type="xs:ID"/>
               <xs:attribute name="class" type="xs:NMTOKENS"/>
               <xs:attribute name="style" type="xs:string"/>
          </xs:complexType>
     </xs:element>

Cannot finish update with live update

Every time I try to update my drivers with live update 2 (latest version), It starts downloading and then just stops and NEVER finishes the download.
Anyone got any suggestions?
MSI NFORCE
512 MEGS RAM
AMD 1700+
40 GIG WD HD
CABLE MODEM (ATTBI.COM)

JErnst,
I didn't use the MSI WHQL'd 2920 driver, but i suspect it's the same as the one I did use, as it doesn't come with a Setup.exe
However, all you've got to do is to go into the Control Panel...System...Hardware....Device Manager. Select your Display Adapter (graphics card), rt-clk and select properties
On the Driver tab, select update driver, and select the location where you unzipped the drivers. It should require a reboot.
HTH
BIM2k

I have not been able to sync Entourage to iCloud ever since the iCloud update debacle of yesterday. iCare just claims it is an Entourage problem when it is clear that the update did something that is not allow it to authenticate to sync mail.

I have not been able to sync Entourage to iCloud ever since the iCloud update debacle of yesterday. iCare just claims it is an Entourage problem when it is clear that the update did something that is not allow it to authenticate to sync mail.

You should check that the settings match those in this page:
http://support.apple.com/kb/HT4864

How can I get real time updates in multiple views when scrubbing through the timeline?

I am using After Effects CS 5.5 on Windows 7. When I use the mouse to click / drag / scroll through the timeline, one view updates in real time, this is great! If I open a second view, it only updates that view when I finish scrolling.
I would like to be able to scroll back and forth through the timeline, and have two different compositions update in real time (live update)?
Is this possible?
Thank you!

The long answer is: No. It's not even a performance issue, it's how AE evaluates time, since time is fluid and can be mangled in a million ways from time-remapping to expressions...
Mylenium

Preview does not update when scrolling through timeline ?

Hi there,
I have a strange problem since I installed the new After Effects CS4. Usually when I scroll through the timeline, the preview always live-updates in a lowres version, and when I release the left mousebutton, the quality gets better. That's the way it should be. But now, nothing happens when I scroll, but when I release, the preview updates. This is quiete enoying, because when I do font-animations, I need that live preview. Am I doing something wrong? On the exact same computer of my collegue, it works perfectly...
Thanks for any hints...
Michael from not yet sunny Munich

Hey! You're my man!!! I always looked at the buttons beneath the preview-window, but nothing changed. I've never seen this button you mentioned.
THANKS A LOT! That saves a lot of time!
Michael

[915 Series] Problem with Live Update 3

I'm having a problem installing MSI's Live Update 3 on my PC. Everytime I install it and reboot the PC, the following happens: boot-up will progress normally through POST, the Windows XP Splash screen, the Welcome Screen, up through the initial load-up of my Windows desktop. But before all the system tray icons finish loading in the taskbar, I will get a blue screen of death and the PC spontaneously reboots, and the cycle will continue infinitely. I know that it is definitely the Live Update software that is causing this, because A) I can boot up into safe mode and the error does not occur until I try to manually start the Live Update software B) the error stops occuring if I (in safe mode) initiate a System Restore and go back before the point where Live Update was installed. I would like to be able to use my Live Update software if possible, but I can't get beyond this system crash with it installed. Any suggestions?

Rename or delete the ntaccess.sys file in \Program Files\MSI\Live Update 3. You will get a error when you run Live Update or Live Monitor about a service not started but just keep clicking OK and it seems to work, although I only download the files and canceled the installation. For online Live Update I think you'll find the file in \Windows\System32. Good luck.

After Effects has started crashing when I scrub through timeline.

I've been working on an animation for several weeks and now, starting yesterday, whenever I scrub through the timeline the program crashes on me and gives several error messages. It seems to have started after I added a large image layer with motion blur enabled that moves pretty quick. But even if I turn off motion blur for the whole comp the issue still occurs.
Error messages are as follows:
After Effects error: crash occurred while invoking format plug-in “PNG”.
After Effects error: crash occurred while invoking rendering plug-in “AE_OpenGL”.
After Effects error: Crash in progress. Last logged message was: <6356> <ASL.ResourceUtils.GetLanguageIDFromRegistry> <0> Unable to obtain the User 'Language' registry key at: Software\Adobe\After Effects\10.5\ Defaulting to 'en_US'.
After Effects can’t continue: sorry, After Effects has crashed. For After Effects Help and Support, go to http://www.adobe.com/support/aftereffects. If you still can’t resolve the issue, please contact Adobe Technical Support (2).
( 0 :: 42 )
Before quitting, you have one chance to save your project (don’t use the same name as the original).
I am using After Effects version 10.5.0.253.
I have tried several troubleshooting steps such as updating my display drivers, disabling OpenGL in Preferences > Previews, Moving the Extensions folder out of my install, Recreating my preferences, Purging the cache, and even just uninstalling and reinstalling After Effects all to no avail.
Additional Details:
Windows 7 Professional SP1 64-Bit
CPU: Intel Core i7-2600 @ 3.40Ghz
RAM: 8.00 GB
GPU: NVIDIA GeForce GT 630 with Driver ver. 320.49
Any help from the community would be greatly appreciated. I'm usually good at being able to research and resolve my own issues by this one has me stumped and my boss is on my case about the deadline.
Thank you.

While I did have OpenGL disabled in Preferences > Previews its seems I still had Fast Previews set to Adaptive Resolution - OpenGL off. I've switched this to just Off and now seem to be back on track. I believe I didn't have an understanding of what all "turn off OpenGL" truly meant. I'll continue working and report back wether or not I have any more issues related to this.
What would have causes this issue to appear in the first place? I've been working in AE 5.5 for about 2 years now doing a multitude of different projects but this is the first time I've run up against this issue. Is my hardware just simply underpowered?
Edit: Spelling

Problems with Live Update 3 and Core Center

Hi All
I have just put together the system listed below. On the first boot-up screen "Live Update 2" is displayed on the top right of screen. I installed "Live Update 3" from the Drivers & Utilities CD supplied with the Mobo. On rebooting, the computer crashes straight after loading Windows. The problem occurs even after I downloaded the latest version.
I also installed Core Center from the same CD. This works fine until I try to switch user. It then comes up with the error "No Hardware Monitor Found" and crashes. The same thing happens after downloading the latest version.
What could be causing this?
Many thanks.

Upgrade BIOS and see what happens...

2.2 update causes problems when fastforwarding through streamed videos

Has any else exprienced problems when trying to fast forward or skip to later sections of a large movie file (>1 gig) that is being streamed from a shared network folder? After the 2.2 update the file often not play after FFwarding but rather continuously tries to 'load' the file - the loading bar usually gets to about 99% but never to 100%. This problem was not existent for me with the 2.1 software.

After doing a factory re-install of ATV 2.1 software (from 2.2) the streaming worked just fine again with my mac mini and router. There are reasonable seek delays but not like in 2.2 where the delay is indefinite. My iTunes library is being streamed from a USB harddrive attached to my mac mini. My LAN setup is wired so the problems I am experiencing is not due to wifi lag.
All of my files that I am attempting to stream are large, single chapter videos. I doubt it is a chapter issue, however, as even fast forwarding hangs the video playback after a few seconds of seeking.

Problems when scrubbing through timeline with live update on

Similar Messages

Maybe you are looking for