Problems when trying to load a flat file
I am trying to preview a flat file which I am able to preview on an existing BW system but not on a replacement system (which is a 3.5 system). The structures are identical. The message that I get is below: The infoobject definition for 0CALMONTH is the same in both systems i.e.
Input: 6
Conversion routine: PERI6
Output length: 7
Can someone assist? Thanks
Error in conversion exit
CONVERSION_EXIT_PERI6_INPUT
Detailed message:
Error in conversion exit CONVERSION_EXIT_PERI6_INPUT
Message no. RSAR137
Diagnosis
An error occurred in record 1 during execution ofconversion exit CONVERSION_EXIT_PERI6_INPUT for field CALMONTH.
Procedure
Check that the record where the error occurred has the correct format, and correct it accordingly.
Hi Niten,
Goto the transfer rules -> Data str/tranger structure tab -> and check whether the 0CALMONTH has any conversion exit assigned. You can remove that and retry.
Bye
Dinesh
Similar Messages
-
Errors when trying to load a flat file
When I try and load a flat file (I have also manually created a test .csv file with one record) I am able to load to PSA, but when I try and load to the Object I get the following error message (below), how can I fix this? Thanks
The test record is:
1460;MAMO;UK - Banbury;MAMO;Other;FCJ
Diagnosis
Data record 1 & with the key '1460MAMO &' is invalid in value 'Other &'
of the attribute/characteristic WINVCAT &.
System response
The system has recognized that the value mentioned above is invalid, and
has processed this general error message. A subsequent message may give
you more information on the error. This message refers to the same
value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in
the PSA maintenance screens. If this message appears in the master data
maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.Hi
GO to Transaction RSKC and check whether & available or not,if it is not there please enter & value and execute.
and also go to the psa and change record(delete the gap before & and save and reload it...
Thanks
Teja
Message was edited by: Teja badugu -
GenericServiceFactory initialization problem when trying to load Web servic
Hi,
I am making a Guided procedure that calls a webservice. I have created a new Destination Template and was able to load the webservice definition successfully, but when I test the callable object I created for that same webservice y get the error:
GenericServiceFactory initialization problem when trying to load Web service model for WSDL.
Somehow I think there is something wrong with the user authentication. The Destination template has a user and password but somehow I think the callable object test is not using this information at all.
Can anyone help ?
Thanks in advanceHi Hans,
Have you verified if you can call any external web service calls from your J2EE engine? Go into the SOA Management / Global settings (if you are on CE - if you're on 7.0 it's in manage WS desintations).
Look at your proxy settings and set them like your web browser that enables external calls. For example, in the SAP network I set my global proxy settings on my local J2EE engine to be:
Proxy host: proxy
Proxy port: 8080
Exclude list: *.sap.corp
Does that make sense - have you verified if your settings are correct for your company?
Regards
Ginger -
Crystal Reports XI R2 Server problem when trying to load groups from LDAP
Hi,
I'm using Crystal Reports XI R2 SP4 on RedHat Linux. My users are being authorized through LDAP (OID). My problem is that after removing all groups (right now no groups/users are visible in CMC) in CMC Authentication tool and then trying to add them again I'm receiving following error:
"LDAP: Failed to commit objects to server : Duplicate object name in the same folder."
I've checked connectivity to LDAP server and it's ok. Could it be connected to CMS problems/corruption? Any help/suggestions would be appreciated.
Regards,
MarcinThe only personal folders visible from under Admin panel are for users Administrator and Guest. I've tried to query CMS tables but these store entries not in plain text so I cannot identify entries connected to personal folders. I have also tried to do this via Query Repository tool but all returned entries were ok.
I have also noticed that when trying to load group from LDAP after it returns error "LDAP: Failed to commit objects to server : Duplicate object name in the same folder." entry for this group is created in CMS table. Also this group is then visible in admin Groups panel. No users are created with the group and when I'm trying to list users belonging to added group it returns "internal secLDAP security plug-in error" but without any other suggestion what went wrong. -
Problem when trying to load an XML document with DTD or XML SCHEMA
Hello
I have tried to load an XML document in Data Services, and I created the xsd file and Dtd file. (With altova xml spy software automatically) to import into SAP Data Services 3.2. .
In Data Services I created the dtd import file DTD and then called the XML file from the DTD (the xml file is validated vs the dtd file), and I could not read the xml correctly because it tells me that an ELEMENT called <item> expected joiners who did not come in the structure of import (dtd), but if the xml.
I understand that the document root is the label: CUSTOMER_FULL_2014, the data flow is as follows:CARGA_XML_CUSTOMER |
Turns out the joiners element is used to separate the xml elements are repeated, but is used at different levels. My idea is that the design will dtd second, or something I'm missing or is incorrectly stated.
Thank you.
xml
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
<?xml version="1.0" encoding="utf-8"?>
<CUSTOMER_FULL_2014>
<item>
<CUST_NO>202222</CUST_NO>
<ADDRESS>
<item>
<SHIP_TO>202222</SHIP_TO>
<NAME1>Henley.</NAME1>
<STREET>Vitacura #40</STREET>
<CITY>LIMA</CITY>
</item>
</ADDRESS>
<EQUIPMENT>
<item>
<EQUI_NO>81623</EQUI_NO>
</item>
<item>
<EQUI_NO>81633</EQUI_NO>
</item>
<item>
<EQUI_NO>81993</EQUI_NO>
</item>
<item>
<EQUI_NO>82003</EQUI_NO>
</item>
<item>
<EQUI_NO>82013</EQUI_NO>
</item>
<item>
<EQUI_NO>82103</EQUI_NO>
</item>
<item>
<EQUI_NO>82113</EQUI_NO>
</item>
<item>
<EQUI_NO>581203</EQUI_NO>
</item>
<item>
<EQUI_NO>900003-EMER</EQUI_NO>
</item>
<item>
<EQUI_NO>9000033-STOCK</EQUI_NO>
</item>
</EQUIPMENT>
<STORAGE_LOC>
<item>
<STOR_LOC_NO>0001</STOR_LOC_NO>
<DESCRIPTION>01 Parts Center</DESCRIPTION>
</item>
<item>
<STOR_LOC_NO>0056</STOR_LOC_NO>
<DESCRIPTION>56 henley</DESCRIPTION>
</item>
</STORAGE_LOC>
</item>
<item>
<CUST_NO>2007933434343</CUST_NO>
<ADDRESS>
<item>
<SHIP_TO>2007933434343</SHIP_TO>
<NAME1>Campos de Almacenaje SA</NAME1>
<STREET>Calacoto2, Calle 1</STREET>
<HOUSE_NO>Piso 1</HOUSE_NO>
<CITY>La Paz</CITY>
</item>
</ADDRESS>
<EQUIPMENT>
<item>
<EQUI_NO>90000-EMER</EQUI_NO>
</item>
<item>
<EQUI_NO>90000333-STOCK</EQUI_NO>
</item>
</EQUIPMENT>
<STORAGE_LOC>
<item>
<STOR_LOC_NO>00012</STOR_LOC_NO>
<DESCRIPTION>01 Parts Center</DESCRIPTION>
</item>
<item>
<STOR_LOC_NO>0056</STOR_LOC_NO>
<DESCRIPTION>56 henley</DESCRIPTION>
</item>
</STORAGE_LOC>
</item>
<item>
<CUST_NO>200801333</CUST_NO>
<ADDRESS>
<item>
<SHIP_TO>200801333</SHIP_TO>
<NAME1>CONSTRUCTORA SA.</NAME1>
<STREET>Ruta Panamericana Km 100</STREET>
<CITY>San Antonio 23</CITY>
</item>
</ADDRESS>
<EQUIPMENT>
<item>
<EQUI_NO>1507933</EQUI_NO>
</item>
<item>
<EQUI_NO>1509733</EQUI_NO>
</item>
<item>
<EQUI_NO>90000-EMER</EQUI_NO>
</item>
<item>
<EQUI_NO>90000333-STOCK</EQUI_NO>
</item>
</EQUIPMENT>
<STORAGE_LOC>
<item>
<STOR_LOC_NO>0001</STOR_LOC_NO>
<DESCRIPTION>01 Parts Center</DESCRIPTION>
</item>
<item>
<STOR_LOC_NO>0056</STOR_LOC_NO>
<DESCRIPTION>56 henley</DESCRIPTION>
</item>
</STORAGE_LOC>
</item>
</CUSTOMER_FULL_2014>
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ARCHIVO DTD CREADO (automáticamente con xml spy)
<?xml version="1.0" encoding="UTF-8"?>
<!-- DTD generado con XMLSpy v2014 rel. 2 (x64) (http://www.altova.com) -->
<!ELEMENT CITY (#PCDATA)>
<!ELEMENT item ((SHIP_TO, NAME1, STREET, HOUSE_NO?, CITY) | (CUST_NO, ADDRESS, EQUIPMENT, STORAGE_LOC) | (STOR_LOC_NO, DESCRIPTION) | EQUI_NO)>
<!ELEMENT NAME1 (#PCDATA)>
<!ELEMENT STREET (#PCDATA)>
<!ELEMENT ADDRESS (item)>
<!ELEMENT CUST_NO (#PCDATA)>
<!ELEMENT EQUI_NO (#PCDATA)>
<!ELEMENT SHIP_TO (#PCDATA)>
<!ELEMENT HOUSE_NO (#PCDATA)>
<!ELEMENT EQUIPMENT (item+)>
<!ELEMENT DESCRIPTION (#PCDATA)>
<!ELEMENT STORAGE_LOC (item+)>
<!ELEMENT STOR_LOC_NO (#PCDATA)>
<!ELEMENT CUSTOMER_FULL_2014 (item+)>
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The error of MONITOR Data Services
11676
5184
XML-240108
11-04-2014 17:34:16
|Data flow CARGA_XML_CUSTOMER|Reader READ MESSAGE customer OUTPUT(customer)
11676
5184
XML-240108
11-04-2014 17:34:16
An element named <item> present in the XML data input does not exist in the XML format used to set up this XML source in data
11676
5184
XML-240108
11-04-2014 17:34:16
flow <CARGA_XML_CUSTOMER>. Please validate your XML data.
11676
5184
XML-240307
11-04-2014 17:34:16
|Data flow CARGA_XML_CUSTOMER|Reader READ MESSAGE customer OUTPUT(customer)
11676
5184
XML-240307
11-04-2014 17:34:16
XML parser failed: See previously displayed error message.
The Error from Monitor
The metadata DTD
Thanks
JuanHi Juan Juan,
I generated a new XSD file using MS Visual Studio based on your XML file.
The empty spaces in the source is replaced with <Null> in the target table.
Here is the XSD:
<?xml version="1.0" encoding="utf-8"?>
<xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="CUSTOMER_FULL_20140207_033015_001">
<xs:complexType>
<xs:sequence>
<xs:choice maxOccurs="unbounded">
<xs:element name="CUST_NO" type="xs:unsignedInt" />
<xs:element name="ADDRESS">
<xs:complexType>
<xs:sequence>
<xs:element name="SHIP_TO" type="xs:unsignedInt" />
<xs:element name="NAME1" type="xs:string" />
<xs:element name="STREET" type="xs:string" />
<xs:element minOccurs="0" name="HOUSE_NO" type="xs:string" />
<xs:element name="CITY" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="EQUIPMENT">
<xs:complexType>
<xs:sequence>
<xs:element maxOccurs="unbounded" name="EQUI_NO" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="STORAGE_LOC">
<xs:complexType>
<xs:sequence>
<xs:choice maxOccurs="unbounded">
<xs:element name="STOR_LOC_NO" type="xs:unsignedByte" />
<xs:element name="DESCRIPTION" type="xs:string" />
</xs:choice>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
For Source XML
<?xml version="1.0" encoding="utf-8"?>
<CUSTOMER_FULL_20140207_033015_001>
<CUST_NO>200530</CUST_NO>
<ADDRESS>
<SHIP_TO>903533</SHIP_TO>
<NAME1>HENLEY - PART MAQUINARIAS S.A.</NAME1>
<STREET>Dean Camilo # 148, San Carlos</STREET>
<CITY>LIMA</CITY>
</ADDRESS>
<EQUIPMENT>
<EQUI_NO>4442</EQUI_NO>
<EQUI_NO>8163</EQUI_NO>
<EQUI_NO>8199</EQUI_NO>
<EQUI_NO>8200</EQUI_NO>
<EQUI_NO>8201</EQUI_NO>
<EQUI_NO>8210</EQUI_NO>
<EQUI_NO>8211</EQUI_NO>
<EQUI_NO>58120</EQUI_NO>
<EQUI_NO>90000-EMERGENCY</EQUI_NO>
<EQUI_NO>90000-STOCK</EQUI_NO>
</EQUIPMENT>
<STORAGE_LOC>
<STOR_LOC_NO>0001</STOR_LOC_NO>
<DESCRIPTION>01 Parts Center</DESCRIPTION>
<STOR_LOC_NO>0056</STOR_LOC_NO>
<DESCRIPTION>56 HEN</DESCRIPTION>
</STORAGE_LOC>
<CUST_NO>200793</CUST_NO>
<ADDRESS>
<SHIP_TO>200793</SHIP_TO>
<NAME1>Minera San Cristobal S.A.</NAME1>
<STREET>Calacoto, Calle 90, Torre 2</STREET>
<HOUSE_NO>Piso 5</HOUSE_NO>
<CITY>La Paz</CITY>
</ADDRESS>
<EQUIPMENT>
<EQUI_NO>90000-EMERGENCY</EQUI_NO>
<EQUI_NO>90000-STOCK</EQUI_NO>
</EQUIPMENT>
<STORAGE_LOC>
<STOR_LOC_NO>0001</STOR_LOC_NO>
<DESCRIPTION>01 Parts Center</DESCRIPTION>
<STOR_LOC_NO>0056</STOR_LOC_NO>
<DESCRIPTION>56 HEN</DESCRIPTION>
</STORAGE_LOC>
<CUST_NO>200801</CUST_NO>
<ADDRESS>
<SHIP_TO>200801</SHIP_TO>
<NAME1>ISEMAR S.A.</NAME1>
<STREET>Ruta Km 28.45</STREET>
<CITY>Don Torcuato Paraguay</CITY>
</ADDRESS>
<EQUIPMENT>
<EQUI_NO>15079</EQUI_NO>
<EQUI_NO>15097</EQUI_NO>
<EQUI_NO>90000-EMERGENCY</EQUI_NO>
<EQUI_NO>90000-STOCK</EQUI_NO>
</EQUIPMENT>
<STORAGE_LOC>
<STOR_LOC_NO>0001</STOR_LOC_NO>
<DESCRIPTION>01 Parts Center</DESCRIPTION>
<STOR_LOC_NO>0056</STOR_LOC_NO>
<DESCRIPTION>56 HEN</DESCRIPTION>
</STORAGE_LOC>
</CUSTOMER_FULL_20140207_033015_001>
Output:
Regards,
Akhileshkiran. -
This is the second time I've been here for help and I have had to use IE for the past few weeks because I still have this problem. The images on E-Bay's individual auctions begin to load then stop, I believe it is a Javascript problem. I've already tried the troubleshooting tips for "images don't display" AND I have uninstalled/reinstalled Firefox to no avail. My Space doesn't seem to be displaying properly either, for example, if I want to change the color of a font in a message the boxes appear, but no color...please SOMEBODY HELP! Thank you!
== URL of affected sites ==
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230497781181&ssPageName=ADME:B:SS:US:1123Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
You can also try "Reset all user preferences to Firefox defaults" on the [[Safe mode]] start window - See http://kb.mozillazine.org/Resetting_preferences -
I open Photoshop cs5 version of bridge. Go to a folder that contains photos in .tif, ljpg, etc. file types. When I click on a .tif or .jpg file that I want to open in the raw window of bridge (which it has done for the past year) in opens instead in firefox. How do I stop this from happening????
It sounds like a problem with Photoshop rather than with Firefox. I suggest posting it on their forum @ http://forums.adobe.com/community/photoshop
-
Error when trying to load a flash file in to a dreamweaver document
Every time I try to add flash content to my html site in
dreamweaver (both version 8) I keep getting an error:
"While executing onClick in Object Options.htm, the following
javascript error occured:
at line 55 of file "C:\program
files\...\configuration\commands\object options.js":
cannot find the file C:\program
files\...\configuration\shared\common\cached\empty.htm.
At line 55 of file "C:\program
files\...\configuration\commands\object options.js":
getDocumentDOM: Argument number 1 is invalid.
Can anyone make any sense of this?
I'm fairly new to web development, and new to dreamweaver and
flash as a whole. Thank you in advance for any help!Hi Ravens Fan,
Thanks again for your valuable input. I replaced the string manipulation functions with a path control. I think it works coz I can see the waveform data, rms values etc. And then you said if it works, do a Path to String on that...and I'm not exactly sure how to do that. I attached a snippet of the modified vi. you may refer the original vi snippet in my previous email.
I appreciate it if you could help me again.
Thanks.
Attachments:
read from spreadsheet2.png 283 KB -
Having problem when trying to extract sqldeveloper from file
Dll: C:\Arquivos de programas\WinZip\WZ32.DLL - 17/10/1998 06:00
Extracting to "C:\Arquivos de programas\"
Use Path: no Overlay Files: no
warning [D:/Download/sqldeveloper-v1.0.0.zip]: extra 8192 bytes at beginning or within Zip file (attempting to process anyway)
Error in file #1: bad Zip file offset (Error local header signature not found): 7101
(attempting to re-compensate)
Extracting dbapi.jar
Error: invalid compressed data to inflateI would try re-downloading and another unzip program like http://www.7-zip.org/
-kris -
Error when loading a flat file
Hello,
I am trying to load a flat file into our BW for the first time. I keep getting the error:
Error 1 when loading external data
Message no. RSAR234
I have search SDN and looked at the OSS notes and have tried several suggestions, but I still cannot get the file to load. We are currently on version 3.5.
My transfer structure and flat file do match.
My transfer structure for IO_MAT_ATTR has a transfer method of PSA and is laid out as follows:
IO_MAT Material Number IO_MAT
IO_MATNM Material Name IO_MATNM
IO_MAT is: CHAR 15
IO_MATNM is: CHAR 30
My flat file is saved as a CSV and is as follows:
MATONE,TEA
MATTWO,COFFEE
My file is saved on my local PC and is not open when I try to load it. When I attempt to preview the file in my infopackage, I get the same error there as well.
Any suggestions would be greatly appreciated.
Thanks
CharlaHi Charla,
Error 1 means that the system is unable to access the file. Make sure that the path is correct and also check if the data separator is correctly defined in the "external tab" of the infopackage.
I guess the settings in the "external tab" of the infopackage have some issues.
Bye
Dinesh -
How to load a flat file with lot of records
Hi,
I am trying to load a flat file with hundreds of records into an apps table. when i create the process and deploy it onto the console it asks for an input in an html form. why does it ask for an input when i have specified the input file directory in my process? is there any way around tis where in it just reads all the records from the flat file directly??is custom queues anyway related to what I am about to do?any documents on this process will be greatly appreciated.If any one can help me on this it will be great. thank you guys....After deploying it, do you see if it is active and the status is on from the BPEL console BPEL Process tab? It should not come up to ask for input unless you are clicking it from the Dashboard tab. Do not click it from the Dashboard. Instead you should put some files into the input driectory. Wait few seconds you should see the instances of the BPEL process is created and start to process the files asynchrously.
-
Unable to load the flat file from client work station
Hi,
I am trying load a flat file (.CSV file)from my desktop (Client work station) and getting the following error.
An upload from the client workstation in the background is not possible
Message no. RSM860
Diagnosis
You cannot load data from the client workstation in the background.
Procedure
Transfer your data to the application server and load it from there.
I have recd a .XLS file and then I have converted to .CSV file , which I saved in my desktop and trying to load the same.
Please help me how to go about this?...
Thanks in advance.
Christy.Hi All,
Again, I have tried to load the flat file from clint work station with direct loading..I have got the following errors..
Errors : 1
Record 990: Contents '50,000' from Field /BIC/ZPLQTY_B Not Convertible in Type QUAN -> Long Tex
like this i recd so many errors.
ERROR : 2
Error in an arithmetic operation in record 259
Please help me how to load the flat file successfully.
If I hv to save the flat file in Appl server..how to do that..Please provide step by step instruction..
Thanks
Christy -
Logic Pro X trouble when trying to 'Prelisten' to REX2 files
I just upgraded from Logic Studio 9 to LPX (v10.0.3) and am having intermittent problems when trying to 'prelisten' to REX2 files in the 'All Files' tab of the Browser. Sometimes the REX2 files will 'prelisten' just fine and then LPX will give me an 'Initializing Core Audio' pop-up and then I can no longer 'prelisten' to any my REX2 files. So far I haven't been able to observe any consistent causes for this issue.
Machine specs: Early 2011 17" MBP, OSX 10.8.5, 8GB Ram, 500GB SSD...and I'm using the headphone jack as the main Output.
Anyone else getting this weird behavior with REX2 files in LPX?Yes. And a good way to test further would be to temporarily empty these two folders:
Macintosh HD/Library/Audio/Plug-Ins/Components
Macintosh HD/Users/YourUserName/Library/Audio/Plug-Ins/Components
Then open the same project and see if it still crashes. And then gradually restore items to those folders. -
Error when loading from Flat File
I get the message below when trying to load from a flat file. The change that I made to the Transfer Structure was to move the items. How can I resolve? Thanks
Error 8 when compiling the upload program: row 227, message: Data type /BIC/CCABSMMIMH1 was found in a newer vehi Niten,
check if helps
A newer version of the data type error when loading -
I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.
Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About?
Maybe you are looking for
-
How to install Oracle 9i EE on a clustered server (Windows 2000)
I need to install Oracle 9i on Clustered server (Windows 2000 Server)with Oracle Fail safe. There are 2 Nodes and one Clustered disk with RAID 5. The documentation from Oracle is NOT very helpful as it does not specify the installation of Oracle DB o
-
Microphone doesn't work after Windows clean install
I have a satellite A135-S4677 (Part# PSAD0U-0N700P) which came with 32 bit vista. I recently did a 32 bit windows 7 clean install on a new hard drive. Everything works fine except the internal microphone which does not work. If I connect an external
-
Please tell why, wad happen to my account , just keep change my money but I don't receiver the gem ,
-
Howdo folks Not been on for a while... but due to an accident at home I'm updating some gear (don't ask - moving studio from attic room to spare bedroom... steps... crash... insurance) and would like some help before I push the button. My current set
-
How to enable config torrent service IOMEGA NAS EZ Media & Backup Center LENOVOEMC
Here you are a tutorial how to enable stand alone torrent service on IOMEGA NAS EZ Media & Backup Center How to enable config torrent service IOMEGA NAS EZ Media & Backup Center LENOVOEMC any ask do not hesitate to contact to me. Thanks Roger Bider