Problems when trying to migrate from 6.0 to 6i

Hi,
I'm having problems when trying to migrate a Designer 6.0 application to 6i.
When I get to start the migration after having selected the source application, the process fails immediately after I've pressed the button.
I'm getting the error: CDR-21244: This process has been aborted and the advice to check the log file. But no log file is created.
I've read Note 234984.1 which gives two suggestions in this situation: That the ORACLE_HOME environment variable is unset, and that the LOG_DIRECTORY_RAU directory is writeable. Both is fulfilled in my situation. However it seems that the migration procedure tries to start imp - I've noticed a short flash with the command prompt screen - and when I try to start imp manually from the command prompt I get errors. I was able to fix this error by setting ORACLE_HOME and ORA_NLS33. But the defining ORACLE_HOME is "illegal" ref. Note 234984.1. Of course I tried to leave it anyway, but that didn't help neither: The migration still dies a quick and silent dead.
So now I'm stucked. How can I carry on?
The source is on version 6.0.3.5.0 running on 8.1.5, and the taget is version 6.5.92.1.9 running on 8.1.7.4.
Regards, Michael

The migration from Designer 6.0 to 6i requires careful planning. Please read the migration guide on OTN (http://www.oracle.com/technology/products/designer/index.html) for advice and to assist you with the migration.
Regards
Sue

Similar Messages

Installation problems when trying to update from 7.7.4 to release 7.7.5.

I had installation problems trying to go from Qtime level 7.7.4 to new version 7.7.5 I get an error message after the download and on the reinstall. It basically tells me to download and install manually. Tried this (even running as administrator and get another error message basically telling me the same thing to download and install manually. Anyone have the same thing happen and if so how did you get it fixed?

I'm having a similar problem. I get a message stating that "The feature you are trying to use is on a network resource that is unavailable". It allows me to enter an alternate path a folder containing the installation package (Quick Time.msi). No matter which msi I point it to, I get the same message. I have to cancel out of the installation. I'm trying to get current so I can purchase Quick Time Pro. Anyone know what "feature" it's looking for?

'Audio to Video' problem when trying to import from non-controllable device

Hello,
I am trying to import media from a VHS into FCP, using a 'Dazzle', (DAC from Data Video). In my Capture Settings, under Device Control, I selected 'Non-controllable device', and under the Capture/Input setting, I chose the default, 'DV STSC 48 khz', then did 'Capture Now'. It seemed to work fine, until about half-way through the project, I noticed that the sound did not match up to the people speaking/singing on the video. Should I change the Capture/Input setting to something else? Or, is there another setting I need to make, so that audio/video will match up? Also, should I maybe try a Batch Capture, instead of Capture Now? I just thought of that when writing this - any help would be most appreciated, thank you!
Kristina

Ooooo.... Hate to say... Dazzle just has bad memories for me. Hollywood Bridge... made by Dazzle...
Nothing but problems. Not sure if yours is the same.
Anyway to use your camera as a passthru for the VCR instead?
Still -- no guarantees sync will line up. For that you need to capture in 15 minute or less segments. Hard to do with VHS that will run for 2 hours... but it's your best bet. Join them up in post if you have to.
CaptM

Backup.app problems when trying to restore from a MYBOOK drive FAT32

I recently purchased a MYBOOK external drive and used backup.app in (Max OS X Vers 10.4) to backup my iphoto files. When I went to restore the files, the restore failed.
I was unaware (when I used backup.app with the MYBOOK destination) that I probably should have reformatted the drive in MAC extended (journal) instead of leaving it in FAT32. I think this is likely the problem.
I have also recently upgraded to Leopard, which seems to be working fine.
Does anyone know how I can retrieve my photos that are sitting out in the external drive (about 30GB of data.....)

If all else fails, you could go to the backup folder itself, right click on it, and fish around to find your JPEG files. Inelegant but you'll be able to get them... the fact that's a FAT32 file won't affect the JPEG files themselves (they don't have resource forks).
Once you have all your data off there I'd definitely suggest you reformat it as HFS+ (Journaled). In fact, to use Time Machine, you must reformat the drive.

Permissions problem when trying to import from a cd to itunes

Error message: while converting files - do not have enought access privileges for this operation.
Check permissions on Music folder.
I have check permissions on the music folder and changed it from read only. I then hit apply. When I check again it has gone back to read only. Am I doing something wrong? I can put the same cd on a different computer and it will import into itunes.
Appreciate any input!

If Im thinking right this denotes a corrupt permission file for the Music Folder you have to repair using Tweak UI from Microsoft. The step are covered here at apple.com http://docs.info.apple.com/article.html?artnum=302398

Problem with servlet after migrating from OC4J to WebLogic 10.3

I come across a problem when I was migrating from jDev 11g TP4 to production version in that step also server got changed from OC4J to webLogic.
I am running java http servlet along other jspx pages. When everything was on OC4J there was no problem whit security on this servlet ( servlet was under same authorization automatically, and I was able to create new application module on this servlet by createRootApplicationModule
) but when I changed to WebLogic 10.3 I come across a numerous problems. First one is solved i managed to put the servlet under same authorization as jspx pages by
*<servlet>*
*<servlet-name>report</servlet-name>*
*<servlet-class>path.to.class</servlet-class>*
*<security-role-ref>*
*<role-name>name</role-name>*
*<role-link>valid-users</role-link>*
*</security-role-ref>*
*</servlet>*
but when I trying to create new application module I get JBO-30003 error which is Caused by:
oracle.adf.share.security.ADFSecurityAuthenticationException: JAAS login error.
Invalid null input: name
Has anybody any idea what I am doing wrong?
Thank you for your help, Rok Kogov&scaron;ek

for example:
web.xml
<security-role>
<role-name>yourrole</role-name>
</security-role>
weblogic.xml
<security-role-assignment>
<role-name>yourrole</role-name>
<principal-name>wlsuser</principal-name > 
</security-role-assignment>

I'm trying to migrate from mobileMe to iCloud but I have Snow Leopard (the latest version). It looks like Lion is no longer available because Mountain Lion comes out next month (July). The problem is mobileMe ends on June 30th. How can I migrate?

I'm trying to migrate from mobileMe to iCloud but I have Snow Leopard (the latest version). It looks like Lion is no longer available because Mountain Lion comes out next month (July). The problem is mobileMe ends on June 30th. How can I migrate?
My iphone and my ipad are compatible but when I try to go to icloud on my phone it says to do it on my computer.
I would like to have my calendar, contacts, etc.. all sync like they do now. Is there a way to upgrade before June 30th? If not, will the gap be an issue or will I just be able to buy mountain lion and sync everything?
Any suggestions?
Thank you!

You can buy Lion in the App Store now, but move to iCloud now. If you wait to Mountain Lion, you will only have Mail in Snow Leopard, so you will lose syncing unless you use Lion or Mountain Lion. It's up to you

Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.

Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash, if possible.
Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ 2>&- | wc -l | pbcopy
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
The Terminal window doesn't show the output. Please don't copy anything from there.

Hi There, I have a problem when trying to print either Email or from a web page.

Hi There,
I have a problem when trying to print contents fro either Email's or from web pages, the problem started after i opened Google earth and it down loaded Google Chrome i do not like Google chrome so i removed it from my pc via add and remove programmes since then when i try to print an email i get what looks like the computer settings for writing the email and not the text same for web pages, as anyone come across this problem before i can print any word or spreadsheet documents but problem is with email's and web pages.
Many Thanks.

Something changed on your system, possibly when Google Chrome installed. It could be many things, but what it boils down to, is it needs to go back to the way it was. Either by removing whatever else might still be left from the install, or maybe by reinstalling the printer itself.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

WHEN TRYING TO PURCHASE FROM iTUNES ALWAYS RECEIVE A POP-UP STATING "COULD NOT PURCHASE (name of song) A REQUIRED iTUNES COMPONENT IS NOT INSTALLED (-42404) TRY AGAIN" EXPERIENCED THIS FALL OF 2012 AND THEN SOMEHOW CLEARED UP NOW HAVE SAME PROBLEM. ???

WHEN TRYING TO PURCHASE FROM iTUNES I ALWAYS RECEIVE A POP-UP "COULD NOT PURCHASE (NAME OF SONG) A REQUIRED iTUNES COMPONENT IS NOT INSTALLED (-43404) TRY AGAIN. EXPERIENCED THIS DURING FALL OF 2012 AND HAD NO SATISFACTION AND AFTER A PERIOD OF 4-6 WEEKS TRIED AGAIN AND ALL WAS CORRECTED SOMEHOW. LAST PURCHASE WAS DEC 28TH 2012. NOW MARCH 2013 CANNOT PURCHASE AGAIN. WENT INTO ACCOUNT AND MADE SURE ALL WAS UPDATED BUT STILL NOT ABLE TO PURCHASE. ANY HELP WOULD BE GREATLY APPRECIATED.

Reinstall iTunes

We have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc. from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when

Hello All,
we have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc.
from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when we are trying to access the share folder with IP it asking for credentials i have type again and again
correct credential but unable to access that. If i re-share the folder then we are access it but when we are restarted the system then same problem is occurring.
I have checked IP,DNS,Gateway and more each & everything is well.
Pls suggest us.
Pankaj Kumar

Hi,
According to your description, my understanding is that the same shared folder can be accessed by name, but can’t be accessed be IP address and asks for credentials.
Please try to enable the option below on the device which has shared folder:
Besides, check the Advanced Shring settings of shared folder and confrim that if there is any limitation settings.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?

How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?

Hey tyjox,
Thanks for the question. After reviewing your post, it sounds like you need to deactivate Find My iPhone on a device that does not work. You will need to work with the family member of the account the iPhone is registered with. I would recommend that you use this article to help you resolve or isolate the issue.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
Remove an iOS device you no longer have
If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud).If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device.
Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
When the device is erased, click Remove from Account.All your content is erased and someone else can now activate the device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I just set up my new iMac, and receive error messages when trying to purchase from the iTunes store (error 8003) or update from the App store (error 403 forbidden). THOUGHTS?

I just set up my new iMac, and receive error messages when trying to purchase from the iTunes store (error 8003) or update from the App store (error 403 forbidden). THOUGHTS?

I am not sure what you mean by "Flash Player for steam"; the only Flash Player installers I know is the ActiveX (for Internet Explorer) and the plugin (for other browsers); you can find both at http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
[topic moved to Flash Player forum]

When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it

When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it.
I have been playing whole movies before from VLC without problems.
Any Ideas?

Welcome to the Apple Community.
Yes it's network issues or settings that cause these types of problems most of the time.
The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

Problem when trying to print standart invoice crystal report for SAP

Hi All, I have the following problem when trying to print a system invoice report in crystal reports for SAP
I pass params and load the report using this code
Private Sub DisplayThreadReportSeq()
Dim oView As New frmViewReport
Dim strReportPath As String = ""
Dim strParamName As String = ""
Try
Dim CR As New ReportDocument
CR.Load(oReport.CrstPath)
' Declare the parameter related objects.
SetReportValues(CR)
Dim crParameterDiscreteValue As ParameterDiscreteValue
Dim crParameterFieldDefinitions As ParameterFieldDefinitions
Dim crParameterFieldLocation As ParameterFieldDefinition
Dim crParameterValues As ParameterValues
' Get the report's parameters collection.
For Each oPar As cslParam In oReport.Params
crParameterFieldDefinitions = CR.DataDefinition.ParameterFields
crParameterFieldLocation = crParameterFieldDefinitions.Item(oPar.ParName)
crParameterValues = crParameterFieldLocation.CurrentValues
crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
crParameterDiscreteValue.Value = oPar.Value
crParameterValues.Add(crParameterDiscreteValue)
crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
Next
If pPrint Then
If oReport.Printer "" Then
CR.PrintOptions.PrinterName = oReport.Printer
End If
CR.PrintToPrinter(IIf(oReport.Copies = "", 1, oReport.Copies), False, 0, 0)
SBO_Application.StatusBar.SetText("Printed Document Successfully", SAPbouiCOM.BoMessageTime.bmt_Medium, SAPbouiCOM.BoStatusBarMessageType.smt_Success)
Else
oView.Text = pReport
oView.TopMost = True
oView.Viewer.ReportSource = CR
oView.Hide()
oView.ShowDialog()
End If
Catch ex As Exception
Util_GenErrorLog("DisplayReport", ex)
End Try
End Sub
This code works fine when the report invoke to print is developed in crystal reports version for .net 2008 or .net 2005
when trying to print a report standart getting from SAP BO 8.8.1 using this code I getting the following error:
Error in File C:UsersecombaAppDataLocalTemp5ARInvoiceStandartSap {300B9A68-DF05-4D7B-8F3B-1670A4493BEE}.rpt:
Error in formula .
'Shared numberVar SectionTotalMaxHeght;
A number, currency amount, boolean, date, time, date-time, or string is expected here.
This report is the standart report that SAP 8.8.1 includes and works fine on SAP.
I referenced this dlls CrystalDecisions.CrystalReports.Engine.dll, CrystalDecisions.CrystalReports.Shared, version 10.2.3600
How I can get these dll´s version for Crystal Report 2008 for SAP Business one or How I can solve this problem
thanks in advance,
Ezequiel.

Hi Ezequiel,
You can try to search in SAP Business One Reporting & Printing forum section or post there.
nd.Q

Problems when trying to migrate from 6.0 to 6i

Similar Messages

Maybe you are looking for