Problems when trying to remove clicks/pops
I am trying to remove some clicks/pops and have strange problems:
I change to spectral view and zoom in very much, so the click is about 2 cm wide on my screen, so I can select part of it. Then I go to favorites and choose "Autom. Korrektur" (I have the german version, in the english version it's probably called "Repair Transient" or "Auto Heal"). So far it works fine.
But it happened now several times that after saving (this is important, it only seems to happen right after I save), after using "Autom. Korrektur" for the next time, audition has a problem and the wave file looks garbled. Can anyone else confirm this behavior?
>It's inconsistent to say the least. In most European languages except british, the decimal delimiter is a comma.
Yes, it is a bit inconvenient having the decimal and multiple delimiters the wrong way around, isn't it? And I think that everybody else's use
is wrong - the OS and vast majority of software apps are written in the
lingua franca - QED... but read on, because even I'm prepared to admit that it's not quite that simple, and in all honesty, I don't
really see why a lot of people should have to change the habits of a lifetime - even if they're bad ones!
>Perhaps Adobe should get hold of some beta testers outside the US
They have... most major European countries are represented, one way or another. And yes, there have been complaints about a load of keyboard-related stuff in the past. Unfortunately Adobe have managed to cock this whole thing up even when it was working properly before - as anybody playing with previous scripts with point delimiters will tell you! So, it's not really a beta test problem
per se - it's simply a matter of whether Adobe choose to act on what beta testers say, and that's a whole different ball game; they are not obliged to take any notice of us at all if they don't want to. I have no idea why some things get fixed and other things don't, but in this case it's not because it hasn't been spotted, believe me.
And yes, this all has to do with multiple language versions, and I think very specifically to do with using a language version with the keyboard settings for another country. Sometimes, and with some software, this solves problems - but just as often, it seems to cause even more. But yes, I believe that installing the software using a consistent keyboard layout for the country code you are using generally works - although not always... and yes, Adobe should be consistent, and just as importantly spell out the pitfalls in the installation procedure; this might reduce the frustration somewhat too.
Similar Messages
-
On my Ipad I seem to be having a problem when trying to play YouTube videos embedded on Facebook.
When I click the links, I get a message saying: "Flash Player upgrade required."
and under it, it says, "You need to download and install the lastes version of Adobe Flash Player to view this content"
and also a green button saying "Get Flash Player"
I get this if using chrome or safari .
I can go direct to YouTube it just works.The Facebook link to the video is accessing an Adobe Flash video. Unfortunately, no iOS devices can play flash.
-
when trying to download it pops up with a window saying with current user i may not be able to do everything and is asking for administrater password or continue with current user? when i click current user it does nothing and i dont know the password
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)Not from your end. Click here and ask the iTunes Store staff for assistance.
(126716) -
How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?
Hey tyjox,
Thanks for the question. After reviewing your post, it sounds like you need to deactivate Find My iPhone on a device that does not work. You will need to work with the family member of the account the iPhone is registered with. I would recommend that you use this article to help you resolve or isolate the issue.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
Remove an iOS device you no longer have
If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud).If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device.
Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
When the device is erased, click Remove from Account.All your content is erased and someone else can now activate the device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Hi There, I have a problem when trying to print either Email or from a web page.
Hi There,
I have a problem when trying to print contents fro either Email's or from web pages, the problem started after i opened Google earth and it down loaded Google Chrome i do not like Google chrome so i removed it from my pc via add and remove programmes since then when i try to print an email i get what looks like the computer settings for writing the email and not the text same for web pages, as anyone come across this problem before i can print any word or spreadsheet documents but problem is with email's and web pages.
Many Thanks.Something changed on your system, possibly when Google Chrome installed. It could be many things, but what it boils down to, is it needs to go back to the way it was. Either by removing whatever else might still be left from the install, or maybe by reinstalling the printer itself.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you. -
Receiving an error when trying to remove P00 Security role from the user
Hi All,
I am receiving an error when trying to remove P00 Security role from the user.
After logging on to GRC CUP, clicking on u201CCreate requestu201D, and filling out required information,
I click on Select Roles/Groups
On the next screen,
I click on Existing Roles/Groups
ERROR MESSAGE appears X Action failed and no roles appear in the box to select for removal.
Regards,
VineetHi Vineet,
My be your selection is incorrect
Try this
in Applicaiton Area -- Select ALL
Functional Area -
Select ALL
Company -
Select ALL
Role/Profile/Group Names --- Give p00* and execute the report
if you give only p00 it wont give any result
Hope this helps
Thank you,
Kishore -
i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance
i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance
-
I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back. -
I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.
At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
When editing in Photoshop just add a box or mark on the image, for your tests.
- If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
- If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect. -
I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.
Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About? -
Error received when trying to remove a BW bookmark
Hello All,
When trying to remove a BW bookmark with hierarchy for the Month/Year the following error is received: "System error in program SAPLRRK0 and form SORTING_PRUEFEN_01-04-"
Please advise.
Regards,
KeithNot answered
-
Problem when trying to print standart invoice crystal report for SAP
Hi All, I have the following problem when trying to print a system invoice report in crystal reports for SAP
I pass params and load the report using this code
Private Sub DisplayThreadReportSeq()
Dim oView As New frmViewReport
Dim strReportPath As String = ""
Dim strParamName As String = ""
Try
Dim CR As New ReportDocument
CR.Load(oReport.CrstPath)
' Declare the parameter related objects.
SetReportValues(CR)
Dim crParameterDiscreteValue As ParameterDiscreteValue
Dim crParameterFieldDefinitions As ParameterFieldDefinitions
Dim crParameterFieldLocation As ParameterFieldDefinition
Dim crParameterValues As ParameterValues
' Get the report's parameters collection.
For Each oPar As cslParam In oReport.Params
crParameterFieldDefinitions = CR.DataDefinition.ParameterFields
crParameterFieldLocation = crParameterFieldDefinitions.Item(oPar.ParName)
crParameterValues = crParameterFieldLocation.CurrentValues
crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
crParameterDiscreteValue.Value = oPar.Value
crParameterValues.Add(crParameterDiscreteValue)
crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
Next
If pPrint Then
If oReport.Printer "" Then
CR.PrintOptions.PrinterName = oReport.Printer
End If
CR.PrintToPrinter(IIf(oReport.Copies = "", 1, oReport.Copies), False, 0, 0)
SBO_Application.StatusBar.SetText("Printed Document Successfully", SAPbouiCOM.BoMessageTime.bmt_Medium, SAPbouiCOM.BoStatusBarMessageType.smt_Success)
Else
oView.Text = pReport
oView.TopMost = True
oView.Viewer.ReportSource = CR
oView.Hide()
oView.ShowDialog()
End If
Catch ex As Exception
Util_GenErrorLog("DisplayReport", ex)
End Try
End Sub
This code works fine when the report invoke to print is developed in crystal reports version for .net 2008 or .net 2005
when trying to print a report standart getting from SAP BO 8.8.1 using this code I getting the following error:
Error in File C:UsersecombaAppDataLocalTemp5ARInvoiceStandartSap {300B9A68-DF05-4D7B-8F3B-1670A4493BEE}.rpt:
Error in formula .
'Shared numberVar SectionTotalMaxHeght;
A number, currency amount, boolean, date, time, date-time, or string is expected here.
This report is the standart report that SAP 8.8.1 includes and works fine on SAP.
I referenced this dlls CrystalDecisions.CrystalReports.Engine.dll, CrystalDecisions.CrystalReports.Shared, version 10.2.3600
How I can get these dll´s version for Crystal Report 2008 for SAP Business one or How I can solve this problem
thanks in advance,
Ezequiel.Hi Ezequiel,
You can try to search in SAP Business One Reporting & Printing forum section or post there.
nd.Q -
GenericServiceFactory initialization problem when trying to load Web servic
Hi,
I am making a Guided procedure that calls a webservice. I have created a new Destination Template and was able to load the webservice definition successfully, but when I test the callable object I created for that same webservice y get the error:
GenericServiceFactory initialization problem when trying to load Web service model for WSDL.
Somehow I think there is something wrong with the user authentication. The Destination template has a user and password but somehow I think the callable object test is not using this information at all.
Can anyone help ?
Thanks in advanceHi Hans,
Have you verified if you can call any external web service calls from your J2EE engine? Go into the SOA Management / Global settings (if you are on CE - if you're on 7.0 it's in manage WS desintations).
Look at your proxy settings and set them like your web browser that enables external calls. For example, in the SAP network I set my global proxy settings on my local J2EE engine to be:
Proxy host: proxy
Proxy port: 8080
Exclude list: *.sap.corp
Does that make sense - have you verified if your settings are correct for your company?
Regards
Ginger -
FATAL Error... When trying to remove Apple Mobile Device Support (AMDS) on my windows xp. I tried to update iTunes to update my iPhone software and it told me to uninstall iTunes and AMDS for a newer version. Now I get a fatal error and I can't sync my phone. What should I do?
FATAL Error... When trying to remove Apple Mobile Device Support (AMDS) on my windows xp.
We've made some progress with some of those in recent days, Stop. It looks like (with some of them), the trouble is caused by trouble with the HKEYCURRENTUSER registry keys associated with your usual XP user account.
If that's what is afoot, the following technique may be of some assistance.
Head into your User Accounts control panel and create a new user account with full administrative rights. Log out of your normal account and log into the new account. (Don't use fast user switching to move between accounts.)
Inside the new account, head into your Add or Remove Programs control panel, and attempt to uninstall AMDS from there.
Does the uninstall go through without the fatal error in the new user account?
If so, *staying in the new user account,* do a complete uninstall of iTunes and related componentry as per:
[Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP|http://support.apple.com/kb/HT1925]
(You'll need, in particular, to do the reinstall of iTunes from inside the new account. Experience of the last two cases of this indicates that if you try the reinstall from inside the usual user account, AMDS just silently fails to install.)
If everything seems to have reinstalled correctly, log out of the new account, and log back into your usual account. Try launching iTunes in your usual account. Does it launch properly in there now? -
Problems when trying to migrate from 6.0 to 6i
Hi,
I'm having problems when trying to migrate a Designer 6.0 application to 6i.
When I get to start the migration after having selected the source application, the process fails immediately after I've pressed the button.
I'm getting the error: CDR-21244: This process has been aborted and the advice to check the log file. But no log file is created.
I've read Note 234984.1 which gives two suggestions in this situation: That the ORACLE_HOME environment variable is unset, and that the LOG_DIRECTORY_RAU directory is writeable. Both is fulfilled in my situation. However it seems that the migration procedure tries to start imp - I've noticed a short flash with the command prompt screen - and when I try to start imp manually from the command prompt I get errors. I was able to fix this error by setting ORACLE_HOME and ORA_NLS33. But the defining ORACLE_HOME is "illegal" ref. Note 234984.1. Of course I tried to leave it anyway, but that didn't help neither: The migration still dies a quick and silent dead.
So now I'm stucked. How can I carry on?
The source is on version 6.0.3.5.0 running on 8.1.5, and the taget is version 6.5.92.1.9 running on 8.1.7.4.
Regards, MichaelThe migration from Designer 6.0 to 6i requires careful planning. Please read the migration guide on OTN (http://www.oracle.com/technology/products/designer/index.html) for advice and to assist you with the migration.
Regards
Sue
Maybe you are looking for
-
Exported iMovie in 16:9, but video is 4:3-can I switch back in iDVD?
I created a project in iMovie '11. I had inadvertantly kept it at a 16:9 ratio even though the file/video was 4:3. I then sent it to iDVD. There, I have the option of making the project 4:3 or 16:9. If I put the project at 4:3, will it basically p
-
Intermittent freezes upon cold boot
Greetings gurus, I've been experiencing intermittent freezes on cold boot since a few weeks. I did not have them on 10.5.4. I've only had 4 freezes and according to the CrashReporter log all are identical, as far as I can tell. I have not installed a
-
My computer will not start up. It powers up, I get the gray screen with the apple, then the loading progress bar starts loading to about 25% the the screen goes black. what can I try to get my computer up and running?
-
How to create another instance on linux without using dbca?
I have an oracle database (or instance) named viton1 on my linux. Now I want to create another instance (or database) named viton2 on my linux without using dbca. I know I can create a database by runing a sql script : create database ...... But my p
-
Sharepoint 2010 Custom Visual Webpart button click event firing on page refresh
I have developed a Visual Webpart to create a list in SP using vs2010 and the button click event I have written the list create method. If I click the button list is created successfully. And I refresh the page again list is creating(Again button c