Problems when trying to synchronize
When trying to sync my iPad 2 to install the application GarageBand is a box in which reads as follows: The application "GarageBand" has not been installed on the iPad "my iPad name" because an unknown error occurred (0xE8008001 ). Iknow what I can do.
i deleted my pics... and it worked!!
Similar Messages
-
Error when trying to synchronize audio & midi
Just made the transition from PC to mac. I've used my motu 828 without problems on Logic 5.5, and for the last few days thus was the case on my mac with Logic Pro 7.1.
Today, after casually exploring Garage Band, I cannot get an output signal through the motu (except for clicks) on Logic. Also, it keeps stopping and gives the message 'Error when trying to synchronize audio & midi'.
Other applications come through loud and clear.
I tried resetting the motu, and re-enstalling Logic without luck.
iMac G5 Mac OS X (10.4.4)Thanks Ben for the response. The error message was actually coming up regardless of of how little was running. As it happens, I've somehow managed to fix the problem, but it involved trashing Garage Band.
Your input was much appreciated.
iMac G5 Mac OS X (10.4.4) -
i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance
i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance
-
I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back. -
How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?
Hey tyjox,
Thanks for the question. After reviewing your post, it sounds like you need to deactivate Find My iPhone on a device that does not work. You will need to work with the family member of the account the iPhone is registered with. I would recommend that you use this article to help you resolve or isolate the issue.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
Remove an iOS device you no longer have
If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud).If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device.
Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
When the device is erased, click Remove from Account.All your content is erased and someone else can now activate the device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.
At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
When editing in Photoshop just add a box or mark on the image, for your tests.
- If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
- If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect. -
I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.
Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About? -
Problem when trying to print standart invoice crystal report for SAP
Hi All, I have the following problem when trying to print a system invoice report in crystal reports for SAP
I pass params and load the report using this code
Private Sub DisplayThreadReportSeq()
Dim oView As New frmViewReport
Dim strReportPath As String = ""
Dim strParamName As String = ""
Try
Dim CR As New ReportDocument
CR.Load(oReport.CrstPath)
' Declare the parameter related objects.
SetReportValues(CR)
Dim crParameterDiscreteValue As ParameterDiscreteValue
Dim crParameterFieldDefinitions As ParameterFieldDefinitions
Dim crParameterFieldLocation As ParameterFieldDefinition
Dim crParameterValues As ParameterValues
' Get the report's parameters collection.
For Each oPar As cslParam In oReport.Params
crParameterFieldDefinitions = CR.DataDefinition.ParameterFields
crParameterFieldLocation = crParameterFieldDefinitions.Item(oPar.ParName)
crParameterValues = crParameterFieldLocation.CurrentValues
crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
crParameterDiscreteValue.Value = oPar.Value
crParameterValues.Add(crParameterDiscreteValue)
crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
Next
If pPrint Then
If oReport.Printer "" Then
CR.PrintOptions.PrinterName = oReport.Printer
End If
CR.PrintToPrinter(IIf(oReport.Copies = "", 1, oReport.Copies), False, 0, 0)
SBO_Application.StatusBar.SetText("Printed Document Successfully", SAPbouiCOM.BoMessageTime.bmt_Medium, SAPbouiCOM.BoStatusBarMessageType.smt_Success)
Else
oView.Text = pReport
oView.TopMost = True
oView.Viewer.ReportSource = CR
oView.Hide()
oView.ShowDialog()
End If
Catch ex As Exception
Util_GenErrorLog("DisplayReport", ex)
End Try
End Sub
This code works fine when the report invoke to print is developed in crystal reports version for .net 2008 or .net 2005
when trying to print a report standart getting from SAP BO 8.8.1 using this code I getting the following error:
Error in File C:UsersecombaAppDataLocalTemp5ARInvoiceStandartSap {300B9A68-DF05-4D7B-8F3B-1670A4493BEE}.rpt:
Error in formula .
'Shared numberVar SectionTotalMaxHeght;
A number, currency amount, boolean, date, time, date-time, or string is expected here.
This report is the standart report that SAP 8.8.1 includes and works fine on SAP.
I referenced this dlls CrystalDecisions.CrystalReports.Engine.dll, CrystalDecisions.CrystalReports.Shared, version 10.2.3600
How I can get these dll´s version for Crystal Report 2008 for SAP Business one or How I can solve this problem
thanks in advance,
Ezequiel.Hi Ezequiel,
You can try to search in SAP Business One Reporting & Printing forum section or post there.
nd.Q -
Hi There, I have a problem when trying to print either Email or from a web page.
Hi There,
I have a problem when trying to print contents fro either Email's or from web pages, the problem started after i opened Google earth and it down loaded Google Chrome i do not like Google chrome so i removed it from my pc via add and remove programmes since then when i try to print an email i get what looks like the computer settings for writing the email and not the text same for web pages, as anyone come across this problem before i can print any word or spreadsheet documents but problem is with email's and web pages.
Many Thanks.Something changed on your system, possibly when Google Chrome installed. It could be many things, but what it boils down to, is it needs to go back to the way it was. Either by removing whatever else might still be left from the install, or maybe by reinstalling the printer itself.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you. -
GenericServiceFactory initialization problem when trying to load Web servic
Hi,
I am making a Guided procedure that calls a webservice. I have created a new Destination Template and was able to load the webservice definition successfully, but when I test the callable object I created for that same webservice y get the error:
GenericServiceFactory initialization problem when trying to load Web service model for WSDL.
Somehow I think there is something wrong with the user authentication. The Destination template has a user and password but somehow I think the callable object test is not using this information at all.
Can anyone help ?
Thanks in advanceHi Hans,
Have you verified if you can call any external web service calls from your J2EE engine? Go into the SOA Management / Global settings (if you are on CE - if you're on 7.0 it's in manage WS desintations).
Look at your proxy settings and set them like your web browser that enables external calls. For example, in the SAP network I set my global proxy settings on my local J2EE engine to be:
Proxy host: proxy
Proxy port: 8080
Exclude list: *.sap.corp
Does that make sense - have you verified if your settings are correct for your company?
Regards
Ginger -
Problems when trying to migrate from 6.0 to 6i
Hi,
I'm having problems when trying to migrate a Designer 6.0 application to 6i.
When I get to start the migration after having selected the source application, the process fails immediately after I've pressed the button.
I'm getting the error: CDR-21244: This process has been aborted and the advice to check the log file. But no log file is created.
I've read Note 234984.1 which gives two suggestions in this situation: That the ORACLE_HOME environment variable is unset, and that the LOG_DIRECTORY_RAU directory is writeable. Both is fulfilled in my situation. However it seems that the migration procedure tries to start imp - I've noticed a short flash with the command prompt screen - and when I try to start imp manually from the command prompt I get errors. I was able to fix this error by setting ORACLE_HOME and ORA_NLS33. But the defining ORACLE_HOME is "illegal" ref. Note 234984.1. Of course I tried to leave it anyway, but that didn't help neither: The migration still dies a quick and silent dead.
So now I'm stucked. How can I carry on?
The source is on version 6.0.3.5.0 running on 8.1.5, and the taget is version 6.5.92.1.9 running on 8.1.7.4.
Regards, MichaelThe migration from Designer 6.0 to 6i requires careful planning. Please read the migration guide on OTN (http://www.oracle.com/technology/products/designer/index.html) for advice and to assist you with the migration.
Regards
Sue -
On my Ipad I seem to be having a problem when trying to play YouTube videos embedded on Facebook.
When I click the links, I get a message saying: "Flash Player upgrade required."
and under it, it says, "You need to download and install the lastes version of Adobe Flash Player to view this content"
and also a green button saying "Get Flash Player"
I get this if using chrome or safari .
I can go direct to YouTube it just works.The Facebook link to the video is accessing an Adobe Flash video. Unfortunately, no iOS devices can play flash.
-
Problem when trying to run MD04
I am experiencing problems when trying to run my MD04 Collective access, for vendor say X & Y.
I buy many products from these vendors and I therefore need to have access to place these orders anytime of the day (as it can take more than one hour to raise the orders) and it is only allowing me access last thing in the day for some strange reason.
Please can you look into this - I'm not sure if there is a server issue due to the size of the job, but I must have the ability to undertake this task.
I tried to limit the selection further but still the problem is not getting solved.
please tell me what else can be done?
Thanks in advance.
Regards,
Sonal.Basically when i am trying to do collective access thru MD04 I am putting plant and vendor.
the sys is not displaying the stock reqmt list but is getting time out.
I tried limiting further by putting delivery dates, MRP controller but still it is not working.
What else can be done?
Thanks & Regards,
Sonal -
Problem when trying to place a post wrt BSP
Colleagues,
for a few days i am encountering problems when trying to place a post regarding BSP issue. I am not sure if this is just an IE settings problem or sth on the SDN forum side.
Another option is to check for customized corporate settings of the current project owner.
Any cool ideas are warmly welcomed.
Cheers, Harry
OK, this has been working fine. So what is the problem on the BSP forum? SAP buddies, please assist!
Many THX in advance!
Edited by: Harald Schwenger on May 8, 2008 10:50 AM
Edited by: Harald Schwenger on May 8, 2008 10:52 AMYour launch services database, which stores information about which applications should open certain documents, may need to be repaired. Open the Terminal application found in /Applications/Utilities and paste in this command (all one line):
System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/La unchServices.framework/Versions/Current/Support/lsregister -kill -r -domain system -domain local -domain user
Hit the return key, log out and log in.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.7) -
Problems when trying to update the free version of Adobe Reader Updater 11.0.00 on Windows 8. There is something to fix.??
Have you tried http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.03/misc/AdbeRdrUpd11003.msp ?
Maybe you are looking for
-
[TUTORIAL] GE70 2OE Installing Windows 7 (OS CHANGE)
Hello Forum, Here is my very first post on this forum... but I wanted to share my experience with switching OS on the new GE70 2OE-015NL (as the product name says, I'm from The Netherlands ) I bought my GE70 and immidiately wanted to switch my OS to
-
Subject line covers most of the question. Version 4.0 worked fine. I've uninstalled and reinstalled 4.01. No change. Tools, Addons doesnt reveal addons. New window opens with some toolbars missing and a blank page. Using tabmix plus; maybe that's an
-
ESS Payslip : Error when creating form
Hello All, I get the following error when i click on ESS - Pay Information - Payslip - Payslip Inquiry Service. Please help ! Full Stack Trace com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when creating the form at com.sap.pcuigp.xssfpm.
-
Office Jet Pro 8500A Plus Disconnecting - Communication Errors
My ScannerPrinter Function is disconnecting after printing or scanning 2 minutes earlier I am running on Mac 10.9.5 and noticed that there was a HP Software update V3.0 on Oct 1st 2014 It continually disconnects and I have reset the wireless countles
-
Go talk now is crashing as soon as it opens on my ipad 1
Ever since Feb 1 my go talk now app crashes as soon as it opens Here is the latest crash data Incident Identifier: A39487F2-93DA-40B2-A61F-05A258D9D694 CrashReporter Key: 2706ebd7a133cce0740ff629dac618cdacb51855 Hardware Model: iPad1,1 Process