Problems when trying to test/export movie

Hello. I'm working with Flash CS3. When I test a scene, all
work just fine, but when I try to test movie, or export the swf
file the process stops suddenly and nothing happens.
Do you know what might be causing this? I already tried to
uninstall flash player and intall previous versions as well, but
not working. Yesterday, I managed to export movie just once, but
now is seems permanent!!
In my fla file I have 9 scenes and the file size is about
50mb.
Thanks

If your entire file size is 50 MB, your exporter is likely
just running really slow. Think of it like rendering a video, the
more stuff you have the longer it takes to export. Flash often
appears "non-responsive" during the export if there is a lot of
processing that has to happen. It may even slow your computer down
a bit. I suggest trying to wait for a while (like up to 10 minutes)
for the export to finish, before determining it is actually
unresponsive.
My Flash CS3 also slows down sometimes, when have a lot of
programs open and using RAM, the export sometimes slips into
unresponsive mode, but then comes back on around 30 seconds to 1
minute later. My file size is < 1MB too, so patience may be your
saving grace.
Another option would be to make a new swf player, that can
load each of the 9 scenes as separate swfs. This may be better for
you in the end anyways, as 50 MB is VERY large for the web. Then
you could export each scene individually as its own swf, and load
those swfs as needed into a player.

Similar Messages

I am still uing iMovie09. When I try to export movie some of share parts which are fine during editing, become very shaking. What should I do?

I am still uing iMovie09. When I try to export movie some of share parts which are fine during editing, become very shaking. What should I do?

Thank you so much...
1. I don't have that fat format I checked as I saw this on another answer...BUT...you are right the project was very bloated and I made a new project with the sequence and moved a bunch of projects off to an outside drive and things are flying again...this effect "twirl" was on three clips and this seemed to be creating a problem along with it being a bloated project. Don't know why this effect renders easily then the next second doesn't it's on three clips on the entire project and one or another might not render all of a sudden.
2. I understand what you said about the timeline export...I decided to export the sequence without the matte it was nested in and that sequence did have the chapter markers on the timeline and they again didn't export??? I'll look tomorrow at this it makes no sense if what you're saying is how to do it...the final cut pro book said they should have showed up if I export from the browser and that didn't work either.
3. I then matted that output and rendered it to output but I am worried this will degrade and compress the sequence more than I want by outputting the same sequence with current settings twice???...the couple of outputs I could make nested looked very good as this was one render...however, I tried doing a quicktime "current settings" with the dvd studio pro info still trying to export chapter markers and maybe it's my imagination but the output didn't look as sharp as just an output with just chapter markers???
r. I did look at the final cut pro book and it says that mpeg 2 movies will not read chapter markers anyway if you create one in compressor...if this is true it makes no difference if the quicktime output isn't having chapter markers show up. I assume when I go to author though I can put an mpeg 2 movie into dvd studio pro and create chapter markers at that point!! It seems weird it says it can do it with an mpeg 1 but not an mpeg 2 when everyone is using that for dvds.

I am having the problem when trying to take a panorama picture. It may only take the first frame or doesn't even start at all when I press the shutter button. even though when i hold the phone straight up and down, so that camera is at the top

I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?

To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back.

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.

At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
When editing in Photoshop just add a box or mark on the image, for your tests.
- If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
- If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect.

GenericServiceFactory initialization problem when trying to load Web servic

Hi,
I am making a Guided procedure that calls a webservice. I have created a new Destination Template and was able to load the webservice definition successfully, but when I test the callable object I created for that same webservice y get the error:
GenericServiceFactory initialization problem when trying to load Web service model for WSDL.
Somehow I think there is something wrong with the user authentication. The Destination template has a user and password but somehow I think the callable object test is not using this information at all.
Can anyone help ?
Thanks in advance

Hi Hans,
Have you verified if you can call any external web service calls from your J2EE engine? Go into the SOA Management / Global settings (if you are on CE - if you're on 7.0 it's in manage WS desintations).
Look at your proxy settings and set them like your web browser that enables external calls. For example, in the SAP network I set my global proxy settings on my local J2EE engine to be:
Proxy host: proxy
Proxy port: 8080
Exclude list: *.sap.corp
Does that make sense - have you verified if your settings are correct for your company?
Regards
Ginger

When Trying to View an .mov File, PSE 8.0 Crashes... Help

When Trying to View an .mov File, PSE 8.0 Crashes... Help I was able to view these .mov files without any problem on ACDSee 2.5, any help will be appreciated to determine why .mov files crashe in the PSE 8.0 viewer....
Best Regards,
Larry

Thanks for the reply Larry. This is frustrating, and Adobe support is useless. It all works on my vista 64 bit system, but not on the 32 bit system. The odd thing is that I can open .mov files in Editor by going to File-Import from video, select "all file types" and choose a quicktime movie and it will open and run just fine. I can take stills off the movie. But if I try to open the same movie file with File-Open...I get an error message "Cannot open file......wrong file type" In organizer everything just crashes. I suspect there are some security issues in Vista that won't allow PSE to access Quicktime.
Too bad Windows 7 didn't fix the problem. I was starting to head that way. I will let you know if I find a solution.
Ron

Imovie shuts down when I click to Export Movie, share or finish project.

Imovie shuts down when I click to Export Movie, share or finish project.
I have upgraded RAM Memory cards from 4 to 8 GB and cleaned away the soft wear and files I do not need.
The movie is in HD and about 25 min long.
The "Problem Info" says:
Process:         iMovie [1190]
Path:            /Applications/iMovie.app/Contents/MacOS/iMovie
Identifier:      com.apple.iMovieApp
Version:         9.0.2 (1099)
Build Info:      iMovieApp-10990000~3
Code Type:       X86 (Native)
Parent Process: launchd [102]
What is there to do?
/Nicco

Hello there, averypamby.
The following Knowledge Base article offers up some great information in regards to sharing/exporting your video in Motion:
Motion 5: Export a QuickTime movie
http://support.apple.com/kb/PH16623
Export your project as a movie file
Choose Share > Export Movie (or press Command-E).
Choose an export format from the Export pop-up menu.
This menu provides a list of codecs.
Choose an option from the “Open with” pop-up menu:
Do Nothing: The movie is not opened after the export is completed.
Open with QuickTime Player: The movie is opened in QuickTime Player.
Open with Compressor: The movie is opened in Compressor (if installed on your system).
Choose an option from the Include pop-up menu: Video and Audio, or Video Only.
If you’ve set In and Out points in the Timeline, use the Duration pop-up menu to choose whether to export the sequence or the portion between the In and Out points.
To specify additional Motion-specific options, click Render.
For more information about options available in the Render pane, see Render settings.
To see details about the file to be output, click Summary.
Click Next.
Enter a name and choose a location for the exported file, then click Save.
Motion renders and saves your movie.
Important:    The Export Movie command does not use background rendering, so you must wait until rendering is finished before you can continue to work in Motion.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

TS1424 Getting an error 8008 when trying to download a movie, any ideas?

Getting an error 8008 when trying to download a movie, any ideas?

Is it the Star Trek film ? If it is then other people are having the same problem with it : https://discussions.apple.com/thread/5279174?tstart=0

I get a black screen when trying to watch a movie on itunes

I have a laptop that I take to work. I am a teacher at a school. When using my school internet, I am able to see my movies in itunes. But, when I take my laptop home and use my internet, I get a black screen when trying to view a movie.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images, the permissions.default.images pref should be 1.
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

I got problem when trying to contact my iphone 4 using facetime,it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.

i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?

How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?

Hey tyjox,
Thanks for the question. After reviewing your post, it sounds like you need to deactivate Find My iPhone on a device that does not work. You will need to work with the family member of the account the iPhone is registered with. I would recommend that you use this article to help you resolve or isolate the issue.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
Remove an iOS device you no longer have
If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud).If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device.
Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
When the device is erased, click Remove from Account.All your content is erased and someone else can now activate the device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

When trying to share my movie i get a error message The project could not be prepared for publishing because an error occurred. (-108)" pls help

when trying to share my movie on Imovie i get the following error. "The project could not be prepared for publishing because an error occurred. (-108)"
any idea why this has happened? How do i rectify this?

Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
• Free Space on Start-Up hard disk. How much ? (other disks do not count)
Yours Bengt W

I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can

I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.

Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About?

Problem when trying to print standart invoice crystal report for SAP

Hi All, I have the following problem when trying to print a system invoice report in crystal reports for SAP
I pass params and load the report using this code
Private Sub DisplayThreadReportSeq()
Dim oView As New frmViewReport
Dim strReportPath As String = ""
Dim strParamName As String = ""
Try
Dim CR As New ReportDocument
CR.Load(oReport.CrstPath)
' Declare the parameter related objects.
SetReportValues(CR)
Dim crParameterDiscreteValue As ParameterDiscreteValue
Dim crParameterFieldDefinitions As ParameterFieldDefinitions
Dim crParameterFieldLocation As ParameterFieldDefinition
Dim crParameterValues As ParameterValues
' Get the report's parameters collection.
For Each oPar As cslParam In oReport.Params
crParameterFieldDefinitions = CR.DataDefinition.ParameterFields
crParameterFieldLocation = crParameterFieldDefinitions.Item(oPar.ParName)
crParameterValues = crParameterFieldLocation.CurrentValues
crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
crParameterDiscreteValue.Value = oPar.Value
crParameterValues.Add(crParameterDiscreteValue)
crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
Next
If pPrint Then
If oReport.Printer "" Then
CR.PrintOptions.PrinterName = oReport.Printer
End If
CR.PrintToPrinter(IIf(oReport.Copies = "", 1, oReport.Copies), False, 0, 0)
SBO_Application.StatusBar.SetText("Printed Document Successfully", SAPbouiCOM.BoMessageTime.bmt_Medium, SAPbouiCOM.BoStatusBarMessageType.smt_Success)
Else
oView.Text = pReport
oView.TopMost = True
oView.Viewer.ReportSource = CR
oView.Hide()
oView.ShowDialog()
End If
Catch ex As Exception
Util_GenErrorLog("DisplayReport", ex)
End Try
End Sub
This code works fine when the report invoke to print is developed in crystal reports version for .net 2008 or .net 2005
when trying to print a report standart getting from SAP BO 8.8.1 using this code I getting the following error:
Error in File C:UsersecombaAppDataLocalTemp5ARInvoiceStandartSap {300B9A68-DF05-4D7B-8F3B-1670A4493BEE}.rpt:
Error in formula .
'Shared numberVar SectionTotalMaxHeght;
A number, currency amount, boolean, date, time, date-time, or string is expected here.
This report is the standart report that SAP 8.8.1 includes and works fine on SAP.
I referenced this dlls CrystalDecisions.CrystalReports.Engine.dll, CrystalDecisions.CrystalReports.Shared, version 10.2.3600
How I can get these dll´s version for Crystal Report 2008 for SAP Business one or How I can solve this problem
thanks in advance,
Ezequiel.

Hi Ezequiel,
You can try to search in SAP Business One Reporting & Printing forum section or post there.
nd.Q

Hi There, I have a problem when trying to print either Email or from a web page.

Hi There,
I have a problem when trying to print contents fro either Email's or from web pages, the problem started after i opened Google earth and it down loaded Google Chrome i do not like Google chrome so i removed it from my pc via add and remove programmes since then when i try to print an email i get what looks like the computer settings for writing the email and not the text same for web pages, as anyone come across this problem before i can print any word or spreadsheet documents but problem is with email's and web pages.
Many Thanks.

Something changed on your system, possibly when Google Chrome installed. It could be many things, but what it boils down to, is it needs to go back to the way it was. Either by removing whatever else might still be left from the install, or maybe by reinstalling the printer itself.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Problems when trying to test/export movie

Similar Messages

Maybe you are looking for