Problems when using Adobe Wood Type Std font

I use Adobe Creative Cloud on an IMAC 21.5"/GT750M. Yesterday, I purchased Adobe Wood Type Std. Regular (Mac/Win, English). I installed this font by dragging it to the Font Book. The font is showing up on the font menu in Indesign, but most of the characters are showing up as black ovals or open rectangles with slashes. What have I done wrong? How can I get this font to work? Have I downloaded the wrong version for my computer/software?

As mentioned above, they should be readily available in the glyphs palette in both InDesign and Illustrator (Photoshop does not have one). For other apps like Word, your download should have included both a Keyboard Layouts folder and a Readme folder with instructions on how to install and use them and an explanation of how Pi fonts currently work. If you did not receive those, contact me at [email protected] to let me know and I will send them directly to you. I tested Word myself and the font does list, albeit somewhat illegibly because of all the bullets and ornaments when in sample mode; if you switch the menu to text only, you should find it easily in the 'A's, but it won't work easily in Word until the keyboard layouts are installed.

Similar Messages

Using Adobe PostScript Type 1 fonts on Lion/MacBook Pro

I recently upgraded from a 5-year-old MacBook using Snow Leopard to a MacBook Pro using Lion. I also upgraded from MS Office 2004 to MS Office 2011.
On the old MacBook, as on my even-older Cube using OS 9.2 and Office 2001, I used several old Adobe PostScript Type 1 fonts with no problem. Foremost among them were Adobe Garamond and Adobe Jenson. I've dragged the six Garamond fonts, plus its font suitcase to the Fonts folder in the Library folder. Upon seeing some fleeting font installation messages, I thought all was well.
But no luck. The fonts don't appear as options on old or new documents. Any suggestions or solutions?
JohninDenver

I recently upgraded from a 5-year-old MacBook using Snow Leopard to a MacBook Pro using Lion. I also upgraded from MS Office 2004 to MS Office 2011.
On the old MacBook, as on my even-older Cube using OS 9.2 and Office 2001, I used several old Adobe PostScript Type 1 fonts with no problem. Foremost among them were Adobe Garamond and Adobe Jenson. I've dragged the six Garamond fonts, plus its font suitcase to the Fonts folder in the Library folder. Upon seeing some fleeting font installation messages, I thought all was well.
But no luck. The fonts don't appear as options on old or new documents. Any suggestions or solutions?
JohninDenver

Pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

Problem is:
Flash Player for IE11 (which is the worst browser ever developed - BAR NONE) is a Microsoft product, when it comes right down to it.
Adobe writes the base code and yes, they do collaborate on updates for it, but the gang in Redmond alter the plug-in and add "proprietary" code before embedding it, and at that point it's "their baby".
There are two (2) registry keys - 1 for 32 bit IE and the other for 64 bit IE, as well as a KB patch that prevent all but the most experienced Windows users from ever touching the Flash Player plug-in for IE. So there's NO WAY you could have done a clean install of the ActiveX plug-in in Windows 8. Unless you're an uber-geek, you can only update it through Windows Update.
WIn 8 is an abomination and IE11 made it worse. IE has always been the "problem child" of browsers, failing to handle CSS, Javascript, some PHP and most design "tweaks" that good webmasters can use with other browsers, trouble free.
I have IE8 on XP, 9 on VIsta, 11 on 7, 10 on 8 and 11 on 8.1... but they're all for testing only. I'd have to be out of my mind to ever think of using IE as my primary browser. ActiveX controls have to be disabled formost stuff and that opens millions of security holes in IE.
You've got a good video card and a decent sound card. It's a shame to waste them on a pile of garbage like IE, just because it came with Windows.

Adobe Postscript Type 1 fonts and Windows 7

I have a disk with Adobe Postscript Type 1 fonts ("Adobe Type Basics" that I purchased in 2001). The disk includes an install program that does not work on my current computer (Windows 7, 64). Can I get those fonts installed on my current computer, and if so, how do I do it. Step by step, please. Many thanks.

Although we at Adobe certainly do recommend use of OpenType font technology going forward and especially for new publishing projects for any number of very good reasons, Adobe does continue to fully support Type 1 fonts (FWIW, TrueType and OpenType fonts are every bit as much PostScript fonts as Type 1 or Type 3 fonts are) in all our applications as well as in our Adobe PostScript and Adobe PDF Print Engine products and has committed to do so for the indefinite future.
In fact, Adobe still does license and ship Type 1 fonts in fairly high quantities. Every printer sold with Adobe PostScript 3 by Adobe's OEM partners such as Xerox, Ricoh, Canon, Océ, EFI, etc. is accompanied with host software that includes the Windows and Macintosh host versions of all the Type 1 fonts that are also printer resident.
Actually, the problem that the OP of this thread was experiencing is that apparently, the Adobe Type Basics was built without the .pfm files that normally were shipped with all Adobe type packages for Windows. When ATM was required for installation of those fonts, since ATM had the capability of building .pfm files on-the-fly, this omission wasn't noticed at the time by most users (even I wasn't aware of it until today). Otherwise, there was nothing wrong with those fonts and there was nothing about them that was “showing their age.”
Unfortunately, the Adobe Type Basics OpenType Edition is not a superset of the fonts in the original Adobe Type Basics product. Many of the font families of the original product were replaced by totally different font families. Updating to the OpenType-based product would not have solved the OP's problem without possibly needing to license a whole bunch of additional font families individually, possibly costing more than the $99 for the Adobe Type Basics OpenType Edition itself. For existing content (including templates and artwork), it is not simple to move from Type 1 to OpenType without going through existing content and globally changing all font references. The OpenType versions of Adobe's font do not have the same names as the Type 1 versions - this was not an oversight, but done for good reason since there are differences between the products in encoding and metrics that could in some cases cause layout issues.
- Dov

Coercion problem when using Shared Variable

I have a curious coercion problem when using Shared Variables. I want to share the state of a State Machine, which is an enum saved as a control (typedef) called TYPE State (see attached). I create a shared variable called State and define it as a Custom Control, using the just-mentioned typedef. So far, so good. I've attached three simple VIs -- the first one, Init State, simply wires a constant to the input of the Shared Variable to initialize it -- the wired constant is, of course, defined by the typedef. However, the Get State and Set State, meant to wire an indicator (for reading the state) or control (for setting it), develop coercion dots when wired into the Shared Variable. Why? How do I get rid of the dot? [I suppose I could abandon my typedef and custom control, but the beauty of typedefs and custom controls is that it "enforces" rules, lets you use enums for clarity, keeps the code "honest", etc. -- I'd hate to give that up just to get rid of a dot!].
On a related note, the code seems to work. This is much too simplistic to do anything, but if you open Set State and Get State, set the state to anything, run it (it immediately stops, of course), then run Get State, you'll see the chosen state appear in the indicator. So it does appear to work. The "error" (coercion dot) may, I suppose, be a "bug" in Labview because it can't figure out the mapping of the (very simple!) Custom Control, but if so, I hope it gets fixed quickly!
Bob Schor
Attachments:
Coercion Problem1.zip ‏38 KB

Hello Bob,
I am also seeing this behavior, I will escalate this question to our LabVIEW developers and post again here no later than next Tuesday, November 27th as National Instruments will be closed for the remainder of this week.
If this issue does turn into a product suggestion, I would suspect the workaround would to live with the coersion dot for the time being.
Enjoy the holiday
Regards,
Erik J.
Applications Engineer
National Instruments

TS2570 doesn't work, still the same problem when using Rapidweaver software. NOT with other software.

i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
does anyone have a sollution?

Type '''about:support''' in the URL bar and hit Enter.
Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
If you do have that, click on '''user.js file''' in this sentence. <br />
''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
Does that "different homepage" appear in that user.js file?

Hi.. I got some problem when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

Hi.. I got some problem when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

Hello:
I am not being critical, but you seem to want Safari to behave exactly like Chrome. Every software developer has a plan. Sometimes features in one product parallel other products - sometime not. There might be some things available that would help you. Do not hold your breath, however, for suggestions from people who use these forums. Most of us use (and like) Apple products. If you wish to make suggestions for future improvements, there is a feedback area on this web site that Apple employees read/review.
Candidly, your approach would be akin to suggesting that Apple emulate the "features" in Windows (heaven forbid).
I use Safari (and have for years). I use Firefox (not a bad product) as my alternate browser.
Sorry for what appears to be a pedantic lecture. However, I think most of us adapt to different products if we really want to use them.
Barry
Message was edited by: Barry Hemphill

Where do I find Adobe Postscript type 1 font for Mac

I need Adobe Postscript type 1 fonts for a journal figure. Am using a MacBook Pro OS X10.6.8. Searches of multiple internet sites including those that state they have Postscript type 1 to download has not indentified available software.

What would you do with legacy Type 1 fonts that you couldn't do with OpenType/ TrueType fonts? As far as any programs are concerned, it makes no difference whatsoever for font rendering... You really need to explian better what you are trying to achieve rather than chasing phantoms on the Internet...
Mylenium

Marshal Exception raised when using an union type

Hi,
I am using jdk1.4.0 and I am experiencing a problem when using union types. I was wondering if anyone would have experienced the same problem ? Or would have any idea of a possible workaround ?
Here is the code :
=========
module X208 {
typedef string AE_form1Type;
typedef long AE_form2Type;
enum AETypeChoice { form1Choice, form2Choice };
union AEType
switch(AETypeChoice) {
case form1Choice:
          AE_form1Type form1;
case form2Choice:
          AE_form2Type form2;
module HelloApp {
     interface Hello
          string sayHello(in any param);
=========
My code, in the client, looks like this :
AEType ae = new AEType();
ae.form2(14);
Any many = orb.create_any();
AETypeHelper.insert(many, ae);
string Hello = helloImpl.sayHello(many);
I have noticed that, each time I send an AEType form1 (a String) in the Any, it works fine. But when I try send an AEType form2, it fails with a Marshal exception (see below).
I tried to switch form1 and form2 (actually their types : string and integer) to see if the problem was linked to the integer, but it failed the same on form2.
When checking the bug database, there is one bug which might be close to this, but it's supposed to be fixed now (#4518206).
Did someone experience the same problem ? Am I doing something wrong here ?
Thanks for your help !
ERROR : org.omg.CORBA.MARSHAL: underflow called with grow strategy vmcid: SUN minor code: 202 completed: No
org.omg.CORBA.MARSHAL: underflow called with grow strategy vmcid: SUN minor code: 202 completed: No
at com.sun.corba.se.internal.iiop.BufferManagerReadGrow.underflow(BufferManagerReadGrow.java:25)
at com.sun.corba.se.internal.iiop.CDRInputStream_1_1.grow(CDRInputStream_1_1.java:73)
at com.sun.corba.se.internal.iiop.CDRInputStream_1_2.alignAndCheck(CDRInputStream_1_2.java:28)
at com.sun.corba.se.internal.iiop.CDRInputStream_1_0.read_octet_array(CDRInputStream_1_0.java:567)
at com.sun.corba.se.internal.iiop.CDRInputStream_1_0.getConvertedChars(CDRInputStream_1_0.java:2285)
at com.sun.corba.se.internal.iiop.CDRInputStream_1_0.internalReadString(CDRInputStream_1_0.java:469)
at com.sun.corba.se.internal.iiop.CDRInputStream_1_0.readStringOrIndirection(CDRInputStream_1_0.java:460)
at com.sun.corba.se.internal.iiop.CDRInputStream_1_0.read_string(CDRInputStream_1_0.java:520)
at com.sun.corba.se.internal.iiop.CDRInputStream.read_string(CDRInputStream.java:197)
at com.sun.corba.se.internal.corba.TypeCodeImpl.copy(TypeCodeImpl.java:2430)
at com.sun.corba.se.internal.corba.TypeCodeImpl.copy(TypeCodeImpl.java:2679)
at com.sun.corba.se.internal.corba.TypeCodeImpl.copy(TypeCodeImpl.java:2632)
at com.sun.corba.se.internal.corba.AnyImpl.write_value(AnyImpl.java:581)
at com.sun.corba.se.internal.iiop.CDROutputStream_1_0.write_any(CDROutputStream_1_0.java:534)
at com.sun.corba.se.internal.iiop.CDROutputStream.write_any(CDROutputStream.java:235)
at HelloApp._HelloStub.sayHello(_HelloStub.java:19)
at HelloClient.main(HelloClient.java:37)

I have similar problem. Except that mine throws a null exception write after com.sun.corba.se.internal.corba.AnyImpl.write_value(AnyImpl.java:581).
do you have a workaround?

Why when using Adobe Bridge, I apply a star rating, the rating does not show up in Photoshop Elements? [tags]

Why when using Adobe Bridge, I apply a star rating, the rating does not show up in Photoshop Elements. I use Elements as my organizer and Bridge to view as it is much more user friendly. Anyone any solutions??

Most likely you have set the wrong file as the external editor. You don't want the obvious one; that's just a link to the welcome screen. Go back and choose this one, which is hidden away inside the folder Support Files:

I cannot open pdf files from one supplier when using Adobe Reader but I can using another Viewer

I cannot open pdf files from one supplier when using Adobe Reader but I can open it if using Google PDF viewer or another viewer. The Adobe reader gives the error "There was an error opening this document. The file is damaged and could not be repaired" when I try to open the file. The version of Adobe Reader is 10.1.7, however I have tried other versions and they all fail the same way. I have tested on a number of different PC's in different networks and all fail using Adobe Reader but work using alternate viewer. Also the PC's will open a PDF from any other source.

Newer Reader versions are more strict than older versions (and other PDF viewers). If certain minimum requirements are not met, Reader will tell you that the PDF is damaged. This can happen when a document was created with software that does not adhere to PDF standards, or when the file was damaged during a download or email transmission.
You should contact the creator of these PDFs.

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate

ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate a form.
1) Created a FORM on EMP using the wizards. This creates an AUTOMATIC ROW FETCH
TABLE NAME - EMP
Item Containing PRIMARY KEY - P2099_EMPNO
Primary key column - EMPNO
By default the automatic fetch has a ‘Process Error Message’ of ‘Unable to fetch row.’
2) Created a HTML region. Within this region add
text item P2099_FIND_EMPNO
Button GET_EMP to submit
Branch Modified the conditional branch created during button creation to set P2099_EMPNO with &P2099_FIND_EMPNO.
If I then run the page, enter an existing employee number into P2099_EMPNO and press the GET_EMP button the form is populated correctly. But if I enter an employee that does not exist then I get the oracle error ORA-01403: no data found and no form displayed but a message at the top of the page ‘Action Processed’.I was expecting a blank form to be displayed with the message ‘Unable to fetch row.’
I can work around this by making the automated fetch conditional so that it checks the row exists first. Modify the Fetch row from EMP automated fetch so that it is conditional
EXIST (SQL query returns at least one row)
select 'x'
from EMP
where EMPNO = :P2099_EMPNO
But this means that when the employee exists I must be fetching from the DB twice, once for the condition and then again for the actual row fetch.
Rather than the above work around is there something I can change so I don’t get the Oracle error? I’m now wondering if the automatic row fetch is only supposed to be used when linking a report to a form and that I should be writing the fetch process manually. The reason I haven’t at the moment is I’m trying to stick with the automatic wizard generation as much as I can.
Any ideas?
Thanks Pete

Hi Mike,
I've tried doing that but it doesn't seem to make any difference. If I turn debug on it shows below.
0.05: Computation point: AFTER_HEADER
0.05: Processing point: AFTER_HEADER
0.05: ...Process "Fetch Row from EMP": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:EMP:P2099_EMPNO:EMPNO
0.05: Show ERROR page...
0.05: Performing rollback...
0.05: Processing point: AFTER_ERROR_HEADER
I don't really wan't the error page, either nothing with the form not being populated or a message at the top of the page.
Thanks Pete

Problem when using About Operator in Contains Query

Hi,
I'm new to Oracle and this forums too. I have a problem when using about operator in contains query.
I create a table with some records and then create a context index on 'name' column.
CREATE TABLE my_items (
id           NUMBER(10)      NOT NULL,
name         VARCHAR2(200)   NOT NULL,
description VARCHAR2(4000) NOT NULL,
price        NUMBER(7,2)     NOT NULL
ALTER TABLE my_items ADD (
CONSTRAINT my_items_pk PRIMARY KEY (id)
CREATE SEQUENCE my_items_seq;
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Car', 'Car description', 1);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Train', 'Train description', 2);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Japan', 'Japan description', 3);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'China', 'China description', 4);
COMMIT;
EXEC ctx_ddl.create_preference('english_lexer','basic_lexer');
EXEC ctx_ddl.set_attribute('english_lexer','index_themes','yes');
EXEC ctx_ddl.set_attribute('english_lexer','theme_language','english');
CREATE INDEX my_items_name_idx ON my_items(name) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS('lexer english_lexer');
EXEC ctx_ddl.sync_index('my_items_name_idx');Then I perform contains query to retrieve record :
SELECT count(*) FROM my_items WHERE contains(name, 'Japan', 1) > 0;
COUNT(*)
      1
SELECT count(*) FROM my_items WHERE contains(name, 'about(Japan)', 1) > 0;
COUNT(*)
      1But the problem is when I using ABOUT operator like in Oracle's English Knowledge Base Category Hierarchy it return 0
SELECT count(*) FROM my_items WHERE contains(name, 'about(Asia)', 1) > 0;
COUNT(*)
      0
SELECT count(*) FROM my_items WHERE contains(name, 'about(transportation)', 1) > 0;
COUNT(*)
      0I can't figure out what 's wrong in my query or in my index.
Any help will be appreciated.
Thanks,
Hieu Nguyen
Edited by: user2944391 on Jul 10, 2009 3:25 AM

Hello (and welcome),
You'd be best asking this question in the Oracle Text forum, here:
Text
And by the way, it will help others to analyse if you put {noformat}{noformat} (lowercase code in curly brackets) before and after your code snippets.
Good luck!

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Have no idea of what you were even doing in Photoshop my crystal ball is out for repairs so I can not see.

Problems when using Adobe Wood Type Std font

Similar Messages

Maybe you are looking for