Problems when using multiple clips
Hi!
The Sony camera I creates clips 2GB max. So if I leave the camera recording for an hour, there won't be 2 clips, there will be several that are 2 gb max.
I have inserted them all into Premiere and snapped them all together.
There is a little audio gap between clips. The first clip goes right into the second clip perfectly, but there is a break in the audio portion.
Any ideas on how I can fix that?
Since the clip names in the project are only references to the actual files on disk, Pr is smart enough to remember that "Bob's Funny Tennis Swing" in the project actually points to the file "00004.mts" on disk, and it will continue to associate all of the metadata for 00004.mts with Bob's Funny Tennis Swing.
The bottom line is that you can freely name the clips in the project anything you want and let Pr worry about keeping track of the metadata. You can even add your own metadata in the project and Pr will keep track of that, too.
Jeff
Similar Messages
-
Printing problem when use multiple printers
Hi to all,
we are using printing through multiple printers in the network, after u start the machine if u use one printer it is ok, when the time u start printing with another printer the problems start like it starts from middle of the page or it prints half of the page then it leaves balnk remainig. etc. the printers \we are using are one is EPSON LX-300+ and another is HP Laser 1200. we are using orginal softwares suppliers by the prinnters.. Oracle reports developer6 is the reports.
any one has got experice in this.
Thanks in advance..Can you access page1 and page2.jsp correctly on their own?
ie could the problem be with page2.jsp rather than the import command? -
Trim mode 'wrong frame' problems when using merged clips
Hello there,
We are having a problem with the trim mode on FCP 6.0.4. We're working with 1080psf 24 Apple ProRes 422 material, captured using a AJA Kona card.
The sound and picture were recorded separately, and synced manually (by creating merged clips) in FCP.
When we go into the trim window, it shows a different frame as the incoming or outgoing frame on some clips. In other words it's not actually showing us the real frame before or after the cut. Instead it shows a frame that's half a second back, for example. When we preview the cut, it cuts in the 'right' place, but when we pause and try to fine cut the transition using +1 keys (or trim back/forward keys), it shows us the wrong frame. When we preview it again, the cut is still in the 'right' place - not the frame represented when it's stilled. This makes using trim mode nigh-on impossible since it's not actually showing you the frames you're cutting.
Are there any patches or workarounds to fix this issue? I can't find any fixes on forums/help sites or the FCP manual.
Tried trashing prefs, repairing disk permissions and all the usual maintenance stuff!
Exporting new Quicktimes of the merged clips and then re-importing them is not an option, as they need to be timecode accurate to be recaptured for the online and vfx work.
Any advice would be much appreciated - if no solutions exist we'll have to switch everything over to Avid, and that'd be a mammoth job.
Many thanks in advance!You may not be zoomed in enough in the Timeline window, the more you zoom in, the more detailed edit you can perform. Zoom out too much, and you won't have the sensitivity.
-
Syncing problems when using multiple iPods on the same computer?
I own three iPods. An 8GB nano, a 16GB touch, and a 64GB touch.
iTunes seems to have no problems with the nano, but it seems to have issues from time to time with the two touch iPods. "Syncing" sometimes becomes "screwing up" in the form of deleting content that I have purchased.
My latest attempt to transfer a purchase (Toy Story 3) from my 64GB touch resulted in a "sync" which has basically corrupted my media libraries. I can see on iTunes that the media is still on my iPod, and even play it within iTunes from my iPod; when I disconnect my iPod from my computer and attempt to access the same media on the iPod by itself, both my music and my video libraries are showing up blank.
Has anyone else had the same problem?
NOTE: My 64GB iPod touch is not the latest version; it doesn't have the HD camera, but it does have the mic input. My 16GB touch is even older, having neither the camera nor the mic. The 16GB touch is an even bigger mess, with app icons frequently appearing as big grey blocks instead of the pictures they're supposed to be.
I like my 3 iPods. I like iTunes. I like Apple.
I just don't like it when things stop working the way they're supposed to.
HELP!Welcome, Brandon, to the Apple Discussions!
The answer to your question should be found here:
http://docs.info.apple.com/article.html?artnum=300432
And if at some time in the future you decide you'd like to use an iPod on more than one computer, have a look at:
http://docs.info.apple.com/article.html?artnum=61675 -
Problem when use multiple c:import jstl on jsp on Tomcat 5.0
I have jsp that use multipe import jstl tag. I was able to run on the Tomcat 5.5.9. When I deploy it on Tomcat 5.0.28, it is not working.
For example:
<c:import url="/jsp/page1.jsp" />
<c:import url="/jsp/page2.jsp" />
I look at Tomcat cache directory and I only see page1.jsp compiled but not page2.jsp. I look at the catalina.out log file and the error message shows below. I thought JSTL is working for Tomcat 5.x up. Do anyone have any idea? Please help.
Thanks.
java.lang.ArrayIndexOutOfBoundsException: 204
at org.apache.jasper.compiler.JspReader.peekChar(JspReader.java:164)
at org.apache.jasper.compiler.JspReader.isSpace(JspReader.java:357)
at org.apache.jasper.compiler.JspReader.isDelimiter(JspReader.java:440)
at org.apache.jasper.compiler.JspReader.parseToken(JspReader.java:405)
at org.apache.jasper.compiler.Parser.parseCustomTag(Parser.java:1285)
at org.apache.jasper.compiler.Parser.parseElements(Parser.java:1560)
at org.apache.jasper.compiler.Parser.parse(Parser.java:126)
at org.apache.jasper.compiler.ParserController.doParse(ParserController.java:220)
at org.apache.jasper.compiler.ParserController.parse(ParserController.java:101)
at org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:203)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:470)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:704)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:590)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:510)
at org.apache.taglibs.standard.tag.common.core.ImportSupport.acquireString(Unknown Source)
at org.apache.taglibs.standard.tag.common.core.ImportSupport.doEndTag(Unknown Source)
at org.apache.jsp.jsp.offermgmt.ajax.ajaxPromotion_jsp._jspx_meth_c_import_1(ajaxPromotion_jsp.java:218)
at org.apache.jsp.jsp.offermgmt.ajax.ajaxPromotion_jsp._jspService(ajaxPromotion_jsp.java:70)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)Can you access page1 and page2.jsp correctly on their own?
ie could the problem be with page2.jsp rather than the import command? -
I upgraded to Lion and then all video clips on for instance Youtube freeze every tenth second to buffer more data. I have a MacBook Pro and never had any problems when using Snow Leopard. Has Lion problems with this?
Ulf, SwedenUse the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
Why is quicktime slower when using multiple mdat atoms
Hi,
I've been trying to generate a mov file and I noticed that the more mdat atoms I put in my mov file the more the file takes time to load on QuickTime, iTunes.
Even worst, on the iPhone the file takes more than 3 minutes to load.
If there are too many mdat atoms quicktime even says that the file is invalid ( error -2004 or -2002, I don't remember exactly).
Why is quicktime/iTunes slower when using multiple mdat atoms ?
Thanks,Yeah! Problem solved: It's a QT issue.
Cause: Mac Update Software downloaded a faulty QT.
Solution: Download QT from Apple's QT site.
Great to have the Video back -
Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks
search google for "iphone remove picture from contact"
-
ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate
ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate a form.
1) Created a FORM on EMP using the wizards. This creates an AUTOMATIC ROW FETCH
TABLE NAME - EMP
Item Containing PRIMARY KEY - P2099_EMPNO
Primary key column - EMPNO
By default the automatic fetch has a ‘Process Error Message’ of ‘Unable to fetch row.’
2) Created a HTML region. Within this region add
text item P2099_FIND_EMPNO
Button GET_EMP to submit
Branch Modified the conditional branch created during button creation to set P2099_EMPNO with &P2099_FIND_EMPNO.
If I then run the page, enter an existing employee number into P2099_EMPNO and press the GET_EMP button the form is populated correctly. But if I enter an employee that does not exist then I get the oracle error ORA-01403: no data found and no form displayed but a message at the top of the page ‘Action Processed’.I was expecting a blank form to be displayed with the message ‘Unable to fetch row.’
I can work around this by making the automated fetch conditional so that it checks the row exists first. Modify the Fetch row from EMP automated fetch so that it is conditional
EXIST (SQL query returns at least one row)
select 'x'
from EMP
where EMPNO = :P2099_EMPNO
But this means that when the employee exists I must be fetching from the DB twice, once for the condition and then again for the actual row fetch.
Rather than the above work around is there something I can change so I don’t get the Oracle error? I’m now wondering if the automatic row fetch is only supposed to be used when linking a report to a form and that I should be writing the fetch process manually. The reason I haven’t at the moment is I’m trying to stick with the automatic wizard generation as much as I can.
Any ideas?
Thanks PeteHi Mike,
I've tried doing that but it doesn't seem to make any difference. If I turn debug on it shows below.
0.05: Computation point: AFTER_HEADER
0.05: Processing point: AFTER_HEADER
0.05: ...Process "Fetch Row from EMP": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:EMP:P2099_EMPNO:EMPNO
0.05: Show ERROR page...
0.05: Performing rollback...
0.05: Processing point: AFTER_ERROR_HEADER
I don't really wan't the error page, either nothing with the form not being populated or a message at the top of the page.
Thanks Pete -
Problem when using About Operator in Contains Query
Hi,
I'm new to Oracle and this forums too. I have a problem when using about operator in contains query.
I create a table with some records and then create a context index on 'name' column.
CREATE TABLE my_items (
id NUMBER(10) NOT NULL,
name VARCHAR2(200) NOT NULL,
description VARCHAR2(4000) NOT NULL,
price NUMBER(7,2) NOT NULL
ALTER TABLE my_items ADD (
CONSTRAINT my_items_pk PRIMARY KEY (id)
CREATE SEQUENCE my_items_seq;
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Car', 'Car description', 1);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Train', 'Train description', 2);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Japan', 'Japan description', 3);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'China', 'China description', 4);
COMMIT;
EXEC ctx_ddl.create_preference('english_lexer','basic_lexer');
EXEC ctx_ddl.set_attribute('english_lexer','index_themes','yes');
EXEC ctx_ddl.set_attribute('english_lexer','theme_language','english');
CREATE INDEX my_items_name_idx ON my_items(name) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS('lexer english_lexer');
EXEC ctx_ddl.sync_index('my_items_name_idx');Then I perform contains query to retrieve record :
SELECT count(*) FROM my_items WHERE contains(name, 'Japan', 1) > 0;
COUNT(*)
1
SELECT count(*) FROM my_items WHERE contains(name, 'about(Japan)', 1) > 0;
COUNT(*)
1But the problem is when I using ABOUT operator like in Oracle's English Knowledge Base Category Hierarchy it return 0
SELECT count(*) FROM my_items WHERE contains(name, 'about(Asia)', 1) > 0;
COUNT(*)
0
SELECT count(*) FROM my_items WHERE contains(name, 'about(transportation)', 1) > 0;
COUNT(*)
0I can't figure out what 's wrong in my query or in my index.
Any help will be appreciated.
Thanks,
Hieu Nguyen
Edited by: user2944391 on Jul 10, 2009 3:25 AMHello (and welcome),
You'd be best asking this question in the Oracle Text forum, here:
Text
And by the way, it will help others to analyse if you put {noformat}{noformat} (lowercase code in curly brackets) before and after your code snippets.
Good luck! -
When using FireFox I often cannot view pictures in Hotmail emails, but I have no problem when using other browsers
Do you also have this issue if you temporarily switch to Private Browsing mode?
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Select: [X] "Always use private browsing mode"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/fix-login-issues-on-websites-requrie-passwords -
Coercion problem when using Shared Variable
I have a curious coercion problem when using Shared Variables. I want to share the state of a State Machine, which is an enum saved as a control (typedef) called TYPE State (see attached). I create a shared variable called State and define it as a Custom Control, using the just-mentioned typedef. So far, so good. I've attached three simple VIs -- the first one, Init State, simply wires a constant to the input of the Shared Variable to initialize it -- the wired constant is, of course, defined by the typedef. However, the Get State and Set State, meant to wire an indicator (for reading the state) or control (for setting it), develop coercion dots when wired into the Shared Variable. Why? How do I get rid of the dot? [I suppose I could abandon my typedef and custom control, but the beauty of typedefs and custom controls is that it "enforces" rules, lets you use enums for clarity, keeps the code "honest", etc. -- I'd hate to give that up just to get rid of a dot!].
On a related note, the code seems to work. This is much too simplistic to do anything, but if you open Set State and Get State, set the state to anything, run it (it immediately stops, of course), then run Get State, you'll see the chosen state appear in the indicator. So it does appear to work. The "error" (coercion dot) may, I suppose, be a "bug" in Labview because it can't figure out the mapping of the (very simple!) Custom Control, but if so, I hope it gets fixed quickly!
Bob Schor
Attachments:
Coercion Problem1.zip 38 KBHello Bob,
I am also seeing this behavior, I will escalate this question to our LabVIEW developers and post again here no later than next Tuesday, November 27th as National Instruments will be closed for the remainder of this week.
If this issue does turn into a product suggestion, I would suspect the workaround would to live with the coersion dot for the time being.
Enjoy the holiday
Regards,
Erik J.
Applications Engineer
National Instruments -
NLS support problems when using AL32UTF8 in dads.conf
Hello,
Following a post by Joel Kallman, in one of the forum threads, about the mandatory use of AL32UTF8 in dads.conf, when running HTML DB v2.0, I changed my PlsqlNLSLanguage parameter accordingly.
Prior to the change, I experienced some problems when using non-English characters some application items appeared as gibberish when contained non-English characters, and the LIKE operator didn't perform as expected. After the change, it all seems to work OK, but now I have a different problem.
All the non-English characters in my HTML page source code appears as gibberish. On screen, at run time, everything display correctly, but the source code seems to be corrupted. It is very difficult, and very annoying to debug the pages that way. Is there a way to enjoy both worlds Using AL32UTF8 in the dads.conf, as required, and still getting a coherent HTML source code, containing non-English characters?
Thanks,
Arie.Joel,
I use the following settings and they work fine for me:
Operating system:
LANG=de_DE
LANGVAR=de_DE.UTF-8
NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
daust:oracle[o1020]> uname -a
Linux daust.opal-consulting.de 2.4.21-37.EL #1 Wed Sep 7 13:35:21 EDT 2005 i686 i686 i386 GNU/Linux
daust:oracle[o1020]> cat /etc/redhat-release
Red Hat Enterprise Linux ES release 3 (Taroon Update 6)
daust:oracle[o1020]>
marvel.conf:
<Location /pls/htmldb>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlDatabaseConnectString localhost:1521:o1020
PlsqlNLSLanguage AMERICAN_AMERICA.WE8ISO8859P1
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDefaultPage htmldb
PlsqlDatabasePassword @BZvJYqadreElOqj5poCB5gE=
Allow from all
</Location>
Database:
daust:oracle[o1020]> sqlplus "/ as sysdba"
SQL> select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8ISO8859P1
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
PARAMETER VALUE
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 10.2.0.1.0####################
Using AL32UTF8 resulted in the same problem as described ( and fixed ) here: Re: Strange - HTML not written correctly
So, what is the proper configuration of the DAD, perhaps there are different ones for Unicode instances and non-Unicode instances.
~Dietmar. -
i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
does anyone have a sollution?Type '''about:support''' in the URL bar and hit Enter.
Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
If you do have that, click on '''user.js file''' in this sentence. <br />
''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
Does that "different homepage" appear in that user.js file? -
Performance problem when using CAPS LOCK piano input
Dear reader,
I'm very new to Logic and am running into a performance problem when using the CAPS LOCK-piano-keyboard for input of an instrument: when I'm not recording everything is fine and the program instantly responds on my keystrokes, but as soon as I go into record-mode there is sometimes a delay in the response-time (so I press a key and it takes up to half a second longer before the note is actually played).
Is there anything to do about this to improve performance (for example turning of certain features of the application), or should I never use the CAPS LOCK keyboard anyway and go straight for an external MIDI-keyboard?
Thanks and regards,
Tim MetzDoes your project have Audio tracks and just how heavy it is, how many tracks? Also, what kind of Software Instrument do you use?
Maybe you are looking for
-
Transfer voice memos from iPhone 5 to mac iTunes without replacing all music on iPhone
I have some new voice memos on my iPhone 5 as well as selected music from my iTunes. I want to transfer the new voice memos to iTunes on my mac but it appears that it will since my itunes library to my phone. The iPhone is connected to the mac. i am
-
Erasing All - Install Disc Uncooperative
I need to return my MacBook Pro to my previous employer and want to erase everything before doing so. Unfortunately, the install disc that came with it is allowing me to clean install. Every time I load the disc and hold down "c," it starts to boot,
-
Dear All, My company code currency is INR. We have defined a PO with condition types(currency EUR) and maintained the exch rate(different from OB08 rate). While doing GR, system is picking Spot rate (OB08) for Material line items and for condition ty
-
Itunes on windows vista.. lost download/purchases
HELP!! I recently purchase a itune album, the purchase went through ok and it proceeded to tell me it was processiimg the information, after 30/40mins it had completed three tracks .. i left it overnight as it was taking so long!! this morning it had
-
Dear Friends, Is it possible to have multiple Ship to Addresses for One single vendor. The vendors are service providers to whom Installation material needs to be despatched ( One vendor would be operating from Various states). No invoices are to be