Problems while installing = Ipod does not update

I recently tried upgrading my version of itunes but while it was downloading the program froze and I had to close it. After I unplugged my Nano I realized that all the songs on my ipod were erased, but still in my library. The simple solution seems to plug in the ipod and let it update again.
The problem I encounter here is that the computer doesn't read the ipod or something and I cannot update.
I have tried going to file->update ipod but it cannot be clicked on.
I have also tried updating a new version of itunes but the program starts to download and then tells me that I already have a version of itunes on the computer, and the install fails.
Help!! Is there a way for me to fix this problem without completely restoring my itunes and losing all my music files??

I recently tried upgrading my version of itunes but while it was downloading the program froze and I had to close it. After I unplugged my Nano I realized that all the songs on my ipod were erased
You should never update/upgrade iTUnes while the ipod is connected to it.
Go here and follow all steps for removing iTUnes http://docs.info.apple.com/article.html?artnum=93976

Similar Messages

My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.

My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPod does not update purchased music properly

We have been having an ongoing problem with music that is purchased on ITunes. After downloading the music from the Itunes music store, we try to upload it to the Ipod. It does not upload and I end up having to completely reinstall both ITunes and Ipod software as well as do a complete restore to make it work again. I would like to avoid this. Does anyone have any suggestions? It is possible that I have two IDs floating around out there as a result of the reinstalls that make that make the Itunes music and the Ipod unable to sync with each other? That's only a thought and I don't know where I would check this..

Here are the reasons that some files in your iTunes library may not be sent to your iPod:
Software needs to be updated
Download the latest version of the iPod Updater and then update the iPod.
After the update is complete, download and install the latest version of iTunes.
iPod can't play the type of file
If you're not sure what file types iPod can play, click here.
Media file can't be found
Double-click the song in your library and show iTunes where it is.
Media file not authorized to play on your computer
Double-click the media file in your library and enter your account name and password.
Too many accounts
There is already content from five other iTunes Music Store accounts on the iPod.
The latest version of iTunes explains most of the reasons why some files aren't sent to the iPod. Get the latest version of iTunes here.
If you are getting no message explaining why specific content is not being sent to your iPod, you may need to reset warnings on your iPod.

IPod does not update Podcasts

I have a 4th generation iPod that supports podcasts, but whenever I update my iPod, the podcasts go into my music library and not the podcast directory. How could I fix this? Also, I deleted a podcast totally off my computer, and it still remains on my iPod even when I updated. The podcast refuses to remove itself from my iPod. Is there any way I could solve these problems?

Please? This issue is really annoying me.

My iPod does not update Podcasts correctly

I have a 4th generation iPod that supports podcasts, but whenever I update my iPod, the podcasts go into my music library and not the podcast directory. How could I fix this? Also, I deleted a podcast totally off my computer, and it still remains on my iPod even when I updated. The podcast refuses to remove itself from my iPod. Is there any way I could solve these problems? (I know I also have another post on this, but nobody has answered my other post. It's also been a couple days since it went up)

Yay. Thank you King Cole. You brought a problem to my attention which I just fixed, and it helped me fix another problem too. Here's my procedure for what I did -
1) I opened the iPod Updater.
2)I got an internal manager error.
3)Updated my iTunes 6.00.18 software to the new 6.1.3
4)Reinstalled iTunes Updater Software 10-12-05
5)Reset iPod to factory settings
6)Reloaded iPod
Not only did the Manager error get corrected, but my podcasts were placed in the correct directory and the Fox Broadcasting podcast that I had deleted a long time ago has been removed from my iPod.

My ipod does not update from version 4.1.2 to 5.0 as I do? mine ipod is 3g

because my ipod third generation did not upgrade from 4.2 to 5.0? says that version 4.2 is the most updated!

I suspect you really have a 2G iPod. Those can only go to iOS 4.2.1 If yours is an 8 or 16 GB one it is a 2G since Apple only made 32 and 64 GB 3G iPod. A 32 GB one can be either. To identify yours:
Identifying iPod models
Enter SN here:
Apple - Support - Check Your Service and Support Coverage

Ipod will not update even though itunes shows that copying is complete

Good morning all,
Today I purchased an album from itunes and tried to copy it to my ipod. I have the manual set up where the ipod does not update automatically. Today as soon as I connected the ipod to the pc and itunes opened I saw in the display "ipod is updating do not disconnect". This was not supposed to happen since my settings are to manually update the ipod. Then I manually copied the new album, I saw that it was copying and checked the ipod and saw the music there. But as soon as I disconnected the ipod the music had not copied. any feedback will be appreciated.
m9268ll Windows 2000

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset, and ipod does not appear on itunes when I plug it into the computer. This happened after I agreed to a failed software update.

My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

ILife 06 update now iPod does not sync

Folks,
agter upgrading to iLife 06 the update of my iPod does not work. I get the message that iTunes cannot write or read to this disk.
I had iTunes 6.02 before the update and everything worked fine.
IPod is an 60GB photo with newesr firmware.
Thanks
Oliver

You may have an Ownership & Permissions problem on your iPod.
Select your iPod on the desktop and Get Info (command-I).
Set the permissions to 'You can Read & Write'. Expand 'Details:' and click 'Apply to enclosed items...'.
Tick the checkbox 'Ignore ownership on this volume'.
If your iPod does not show up on the desktop, you have to 'Enable disk use' in Prefernces>iPod (iTunes preferences)
Hope this helps.
M

Java does not update older version when installing from MSI file

I'm using an MSI file of Java because it's easier for deploying through SCCM. Anyway when I do everything works fine except it does not update older versions of Java. So for instance if I have Java 7 update 7 and install Java 7 update 21 using the MSI file I'll then have two versions of Java installed on my computer. Anybody know a way to install using the MSI file where it updates older versions of Java (as long as it's the same major revision) like the exe would?

Yes same problem here. I had a successful rollout with the MSI package and version 1.7 Update 17 on 1500 computers!
I packaged the Update 21 and on my first test-clients the control panel crashes when I try to open it. But the setup ends successful without any error code all eventviewer entries are successful and it seems that the environment is running. Firefox plugintest was successful.
Why doesn't offer Orcale the MSI files?! Since last year Java cost me o lot of time deploying Java. There is no update which you can release quickly because there are always bugs to deploy them.

My iPod touch 5th generation battery indicator does not update when being charged (Updated to iOS 8)

Note that the iPod touch 5th generation was updated to iOS 8. When I connect my charger to my iPod touch, for the first time, the battery indicator does not update when connected to a power source. Instead of being charged, it says that the battery is being depleted. Please fix this issue. Thank you!

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

ITunes Last Played does not update when syncing from iPod

When I synch any of my Ipods, the last played field does not update in Itunes.
If I play the song from Itunes. (11.1.5) Last Played works fine.
I tried the crossfade solution, but that did not work. My crossfade was already not selected.
Any other thoughts?
Thanks

As if by magic it is now working. I went away from the mac for a couple of hours, came back and it started to work. This is scary as I would expect this kind of action on a Mickysoft machine but not a Mac. Ho Hum - at least the problem has been sorted even if I don't know how.
Chris

The Firefox 4.0 cookies window does not update while open

While visiting different websites, the Firefox 4.0 cookies window does not update while open.

See also related problems:
Firefox 4.0 reopens the last webpage visited if the cookies window is open.
https://support.mozilla.com/en-US/questions/801533
Firefox 4 doesn't open in a homepage, but rather opens the last page I visited, which I HATE!!!!!!!!!!!!!!!!!!
http://support.mozilla.com/en-US/questions/789325

How can I update cluster items from inside a while loop that does not contain the cluster?

I have a VI that contains front panel clusters and two while loops. The main cluster contains items such as a doubles "distance" and "stepsize" and boolean "step" (a whole buch of this type stuff). The first loop contains an event structure to detect front panel changes and the second contains code and sub VIs to perform operations based on detected events.
The operator can enter data into either double or click the boolean. If distance is changed the second loop does what is required to process the change. The same happens with stepsize. If step is clicked the ±stepsize value is added to distance and the result is processed. In each case the front panel should track the result of the input and subsequent processing.
Because the clusters are outside the while loop, they are not updated unless I click 'highlight execution' which seems to allow updating each time the execution highlight is updated. There are other issues if I move the clusters into one of the loops.
I've tried referencing the clusters and using local variables and nothing works. It looks like overkill to use shared variables for this.
Any ideas would be greatly appreciated.
Thanks,
Frank

Hi Ben,
Thank you for the response. I followed the link and tried reading everything you posted on AEs but I'm afraid that I didn't understand it all. It seems that each AE example had a single input and a single output (e.g. a double). Is this the case?
What I have is a couple of front panel clusters containing (approximately) 18 control doubles, 8 indicator doubles, 5 boolean radio button constructs and 26 boolean control discretes. I clusterized it to make it readable. In addition I'll eventually have a cluster of task references for hardware handles.
All I want to do is update the front panel values like I would do in a C, VB or any other language. I've tried referencing the cluster and using the reference from inside the loops. I've tied using local variables. Neither works. I'm experimenting with globals but it seems that I have to construct the front panel in the gloabal and then I wouldn't know how to repoduce that on the front panel of the main VI. Sometimes it seems that more time is spent getting around Labview constructs than benefitting from them.
I hope the 'Add Attachment' function actuals puts a copy of the VI here and not a link to it.
Thanks again for the suggestion,
Frank
Attachments:
Front Panel Reference.vi ‏33 KB

I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

Problems while installing = Ipod does not update

Similar Messages

Maybe you are looking for