Problems while roaming since last update of an iPhone 5

Since last update the phone loses signal intermittently while a regular phone in the same network/account has a steady, strong signal. I've reset network settings and since it didn't work I did a hard reset, erasing and restoring the phone. The problem persists

Hey Manuel Flores-Arce,
Thanks for the question. Based on what you stated, it seems like the iPhone is having a service issue while roaming. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
iPhone and iPad: Using cellular networks while in another country - Apple Support
iPhone cellular data connection issues - Apple Support
If you see No Service in the status bar of your iPhone or iPad - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario

Similar Messages

Blank DVD is being scratched while recording since last update

Help me troubleshoot. On 09/29/09 I did an update on Microsoft update. Since then my Microsoft Office 2007 Word will shut down unexpectedly. The iDVD has recently done the same since that update. (It's an automated update that Apple sends, so whatever was the recent one sent is the one I did) Before the update, I had made a few DVDs with the iDVD application. However, I tried to burn a new dvd with the iDVD app. It did not read my blank DVD, although it's the dvds are from the same pack I used before. It also left scratch marks on them. I went through 4 DVDs to confirm that the disk went in clean and came out with a scratches. There have been other "buggy" things since my update. I have never used a wireless mouse, but every time I restart the computer after a shut down, it searches for a mouse. My mouse is still attached to the keyboard, but will be undiscoverable. I hope someone can help.

Hi Miss Chelle, and a warm welcome to the forums!
I see 3 totally different problems here, but knowing which exact Mac you have would help, try the Apple Icon>About this Mac, report what that says at least.
It did not read my blank DVD, although it's the dvds are from the same pack I used before. It also left scratch marks on them. I went through 4 DVDs to confirm that the disk went in clean and came out with a scratches.
The Drive has gone bad or has some foreign matter in it.
Since then my Microsoft Office 2007 Word will shut down unexpectedly.
"Try Disk Utility
1. Insert the Tiger Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions before & after re-install, then reboot again each time.
If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
I have never used a wireless mouse, but every time I restart the computer after a shut down, it searches for a mouse.
OPen System Preferences>Bluetooth, then remove any devive there or see if there's an OFF box.

Problems using Itunes since last update (10.3.1.55)

Hi
I am experiencing problems trying to use itunes since it last updated and installed the latest version (10.3.1.55), a version which seems to be be really faulty if you look at the level of discussions it is generating.
My problems concern my library:
I used to be able to just click on a song to start it: now it won't. I have to either right click and select play 'x' or attempt the 'controls' button several times before its menu is willing to drop for me to select play
I used to be able to also move from one song to another also by clicking on it. Now I can't
I was also listening to a language programme and could not go back or even stop the listening function
the cover 'flow' (view mode) certainly does not flow any more. It is very judery and seems to have a life of its own!
Basically most functions perform poorly or not at all...
I have not attempted to sync with my Ipod as I am not sure whether there is a danger its content might "disappear"!
Either it is a case of someone out there has a brillant idea how to resolve this or Apple gets its act together and releases a better version pronto!
Many thanks
PS: I use Vista home premium 32 bit.

Due to the number of problems with "upgrading" to this OS level, I suggest you try the very clean and very forceful AutoLoader OS Reload:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

[solved] Problem with HPLip since last update

Hi,
since last system update my printer (HP LaserJet M1212nf) which is shared via network does not work any longer. Scanning via xsane works only printing is affected.
Everytime if I want to print any document all I'll get is something like this:
http://privatepaste.com/download/c84615c35d
There isn't any error message or similar. Printing starts as expected, but the result would look like above
hplip 3.12.4-1 and also the required plugin is installed correctly.
kernel 3.3.7-1-ARCH
cups 1.5.3-3
Can anyone help me?
regards,
gnux
Last edited by gnux83 (2012-06-02 21:50:10)

I have no clue what happened between updates but it seems that my printing is borked.
First off, details:
HP Deskjet F4140, using the hpijs ppd file that comes with hplip. I've tried printing in LibreOffice and vim. Both produce this strange page:
http://imgur.com/G6Ex6
I'm at a complete loss for what to do. I've tried removing all the printers from CUPS, unplugging and replugging the printer, hp-setup, etc. I even tested the "device" tab under Printer Options and tried to make it use Postscript instead of PDF. I think there's something wrong in the configuration and I don't know where to look or what to search for on the net. I tried searching for various phrases here on the forum and the CUPS wiki page had nothing on this subject...
Help?

Problem playing game since last update

Right after the last software update from Apple, I stopped being able to open Myst V. The game won't start at all. It took a long time to get the game installed on an intel Mac in the first place, because the Ubisoft patch has a bug and the directions for fixing it by hand were not easy to find. So I'm frustrated that now it stopped working again! I tried reinstalling the game (with the repaired patch), with no luck. Is anyone else having this problem? Any tips?

For starters, Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them.
Then Repair Permissions.
 DALE

Problems with Wireless since last update of NetworkManager

Hello Everyone,
Yesterday I updated NetworkManager (and also, wpa_supplicant if I remember right, and kdeplasma-applets-networkmanagement). The problem now is that I connect to my Wireless and then after a few seconds (maybe 1minute max), I can't use my internet connection anymore, but the applet says that it is still connected. To make it work again I need to disconnect and then re-connect again.
Here are the information I can give :
lspci
03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network
Kernel.log
Sep 10 19:10:02 localhost kernel: [ 1324.198049] wlan0: authenticate with 2c:b0:5d:b8:76:b2
Sep 10 19:10:02 localhost kernel: [ 1324.210490] wlan0: send auth to 2c:b0:5d:b8:76:b2 (try 1/3)
Sep 10 19:10:02 localhost kernel: [ 1324.212868] wlan0: authenticated
Sep 10 19:10:02 localhost kernel: [ 1324.219892] wlan0: associate with 2c:b0:5d:b8:76:b2 (try 1/3)
Sep 10 19:10:02 localhost kernel: [ 1324.223747] wlan0: RX AssocResp from 2c:b0:5d:b8:76:b2 (capab=0x411 status=0 aid=1)
Sep 10 19:10:02 localhost kernel: [ 1324.223829] wlan0: associated
Errors.log
Sep 10 18:48:09 localhost /usr/sbin/crond[435]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Sep 10 18:48:10 localhost NetworkManager[401]: <error> [1347299290.630837] [wifi-utils-nl80211.c:669] nl80211_wiphy_info_handler(): Don't know the meaning of NL80211_ATTR_CIPHER_SUITES 0x000fac06.
Sep 10 18:48:19 localhost kdm_greet[563]: Cannot load /usr/share/apps/kdm/faces/.default.face: No such file or directory
Sep 10 18:48:45 localhost dhclient: can't create /var/lib/dhclient/dhclient-510854b1-14d2-4151-beb1-051d264b184d-wlan0.lease: No such file or directory
Sep 10 18:48:46 localhost dhclient: can't create /var/lib/dhclient/dhclient-510854b1-14d2-4151-beb1-051d264b184d-wlan0.lease: No such file or directory
Sep 10 18:54:24 localhost kernel: [ 385.834000] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 10 18:54:24 localhost kernel: [ 385.834011] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 10 18:54:27 localhost dhclient: can't create /var/lib/dhclient/dhclient-510854b1-14d2-4151-beb1-051d264b184d-wlan0.lease: No such file or directory
Sep 10 18:54:36 localhost dhclient: can't create /var/lib/dhclient/dhclient-510854b1-14d2-4151-beb1-051d264b184d-wlan0.lease: No such file or directory
Sep 10 18:56:06 localhost kernel: [ 487.895676] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 10 18:56:06 localhost kernel: [ 487.895686] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 10 19:00:20 localhost kernel: [ 741.590311] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 10 19:00:20 localhost kernel: [ 741.590324] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 10 19:00:20 localhost kernel: [ 741.590329] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 10 19:00:43 localhost kernel: [ 765.332093] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 10 19:04:52 localhost kernel: [ 1014.346686] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 10 19:04:52 localhost kernel: [ 1014.346696] ath: phy0: TX while HW is in FULL_SLEEP mode
[maria@Maria-PC ~]$ iwconfig wlan0
wlan0 IEEE 802.11bgn ESSID:"CABOVISAO-EA70"
Mode:Managed Frequency:2.412 GHz Access Point: 2C:B0:5D:B8:76:B2
Bit Rate=39 Mb/s Tx-Power=16 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=44/70 Signal level=-66 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:4 Missed beacon:0
Thanks in Advance,
Luis Da Costa

Similar symptoms here. However, my problem was not solved by downgrading networkmanager (tried to networkmanager-0.9.4.0-6, same issue here).
nm-applet correctly lists available interfaces and tries to authenticate to my AP, gets an IP right away but straight after I lose it and then it looks like it's trying to reconnect for a long time. Sometimes it seems like I connected after a while and get an IP, but can't really do anything except ping my own IP.
lspci:
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
rfkill list:
0: asus-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
1: asus-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
3: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
errors.log:
Sep 11 10:45:13 localhost NetworkManager[1770]: <error> [1347353113.507334] [wifi-utils-nl80211.c:669] nl80211_wiphy_info_handler(): Don't know the meaning of NL80211_ATTR_CIPHER_SUITES 0x000fac06.
Sep 11 10:45:13 localhost dhcpcd[1775]: eth0: sendmsg: Cannot assign requested address
Sep 11 10:45:14 localhost kernel: [ 926.006420] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:15 localhost dhcpcd[1816]: wlan0: sendmsg: Cannot assign requested address
Sep 11 10:45:25 localhost kernel: [ 937.115320] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:25 localhost kernel: [ 937.115335] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:25 localhost kernel: [ 937.115340] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:25 localhost kernel: [ 937.124019] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:25 localhost kernel: [ 937.124534] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:37 localhost kernel: [ 949.224720] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:37 localhost kernel: [ 949.227004] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:40 localhost kernel: [ 951.331039] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:40 localhost kernel: [ 951.331753] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:41 localhost NetworkManager[1770]: get_secret_flags: assertion `is_secret_prop (setting, secret_name, error)' failed
Sep 11 10:45:52 localhost kernel: [ 964.248318] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:52 localhost kernel: [ 964.248936] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:46:04 localhost kernel: [ 975.841375] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:46:04 localhost kernel: [ 975.841916] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:46:08 localhost kernel: [ 980.055647] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:46:08 localhost kernel: [ 980.056881] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:46:10 localhost NetworkManager[1770]: get_secret_flags: assertion `is_secret_prop (setting, secret_name, error)' failed
Sep 11 10:46:24 localhost kernel: [ 996.151206] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:46:24 localhost kernel: [ 996.152140] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:46:36 localhost kernel: [ 1008.052517] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:46:36 localhost kernel: [ 1008.053539] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:46:41 localhost NetworkManager[1770]: get_secret_flags: assertion `is_secret_prop (setting, secret_name, error)' failed
Sep 11 10:46:52 localhost kernel: [ 1024.155202] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:46:52 localhost kernel: [ 1024.155824] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:47:04 localhost kernel: [ 1035.752317] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:47:04 localhost kernel: [ 1035.753108] ath: phy0: TX while HW is in FULL_SLEEP mode
kernel.log:
Sep 11 10:45:13 localhost kernel: [ 924.885910] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep 11 10:45:14 localhost kernel: [ 925.939685] wlan0: authenticate with 00:16:a6:12:e0:b0
Sep 11 10:45:14 localhost kernel: [ 925.952192] wlan0: send auth to 00:16:a6:12:e0:b0 (try 1/3)
Sep 11 10:45:14 localhost kernel: [ 925.954290] wlan0: authenticated
Sep 11 10:45:14 localhost kernel: [ 925.961756] wlan0: associate with 00:16:a6:12:e0:b0 (try 1/3)
Sep 11 10:45:14 localhost kernel: [ 925.966830] wlan0: RX AssocResp from 00:16:a6:12:e0:b0 (capab=0x411 status=0 aid=3)
Sep 11 10:45:14 localhost kernel: [ 925.968369] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sep 11 10:45:14 localhost kernel: [ 925.968430] wlan0: associated
Sep 11 10:45:14 localhost kernel: [ 925.976822] wlan0: disassociating from 00:16:a6:12:e0:b0 by local choice (reason=3)
Sep 11 10:45:14 localhost kernel: [ 926.005689] cfg80211: Calling CRDA to update world regulatory domain
Sep 11 10:45:14 localhost kernel: [ 926.006412] wlan0: deauthenticating from 00:16:a6:12:e0:b0 by local choice (reason=3)
Sep 11 10:45:14 localhost kernel: [ 926.006420] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:15 localhost kernel: [ 927.055728] wlan0: authenticate with 00:16:a6:12:e0:b0
Sep 11 10:45:15 localhost kernel: [ 927.068456] wlan0: send auth to 00:16:a6:12:e0:b0 (try 1/3)
Sep 11 10:45:15 localhost kernel: [ 927.071092] wlan0: authenticated
Sep 11 10:45:15 localhost kernel: [ 927.081434] wlan0: associate with 00:16:a6:12:e0:b0 (try 1/3)
Sep 11 10:45:15 localhost kernel: [ 927.086812] wlan0: RX AssocResp from 00:16:a6:12:e0:b0 (capab=0x411 status=0 aid=3)
Sep 11 10:45:15 localhost kernel: [ 927.087724] wlan0: associated
Sep 11 10:45:25 localhost kernel: [ 937.086690] wlan0: disassociating from 00:16:a6:12:e0:b0 by local choice (reason=3)
Sep 11 10:45:25 localhost kernel: [ 937.115320] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:25 localhost kernel: [ 937.115335] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:25 localhost kernel: [ 937.115340] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:25 localhost kernel: [ 937.122145] cfg80211: Calling CRDA to update world regulatory domain
Sep 11 10:45:25 localhost kernel: [ 937.123996] wlan0: deauthenticating from 00:16:a6:12:e0:b0 by local choice (reason=3)
Sep 11 10:45:25 localhost kernel: [ 937.124019] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:25 localhost kernel: [ 937.124517] wlan0: deauthenticating from 00:16:a6:12:e0:b0 by local choice (reason=3)
Sep 11 10:45:25 localhost kernel: [ 937.124534] ath: phy0: TX while HW is in FULL_SLEEP mode
Sep 11 10:45:27 localhost kernel: [ 939.175379] wlan0: authenticate with 00:16:a6:12:e0:b0
Sep 11 10:45:27 localhost kernel: [ 939.187967] wlan0: send auth to 00:16:a6:12:e0:b0 (try 1/3)
Sep 11 10:45:27 localhost kernel: [ 939.190312] wlan0: authenticated
Sep 11 10:45:27 localhost kernel: [ 939.197572] wlan0: associate with 00:16:a6:12:e0:b0 (try 1/3)
Sep 11 10:45:27 localhost kernel: [ 939.201946] wlan0: RX AssocResp from 00:16:a6:12:e0:b0 (capab=0x411 status=0 aid=3)
Sep 11 10:45:27 localhost kernel: [ 939.203598] wlan0: associated
All with latest network-manager. I might add that it was some months since I actually used wireless on this computer.

My iphone 4g wont charge since last update

my iphone 4g wont charge since last update
help please

What iPhone model do you have?
The iPhone 4 can only go to iOS 7.1.2 which was released quite some time ago.
The iPhone 4s can be updated to iOS 8.2 (latest iOS). Is this what you did?
What are you using to charge? Check cable and charger for correct function.

Address Book repetitive crashes since last updates ?

Hello,
I do apologize for the length of this post but I don't know how to shorten it without removing some details useful to understand the problem encountered.
My sister has got an intel iMac with Tiger 10.4.10 and since last updates (10.4.9 and/or 10.4.10) she cannot use AB more than some seconds. It crashes consistently everytime it is open, even if no other action is done. There are also problems with iChat, iCal, Safari and Mail (but less than with AB).
When I visited her recently, I had a look to the console (even though I'm far from being an expert myself but I tried to find a track before asking here).
I noticed that for both crashes (Safari and AB), there was this mention :
quote
+CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:+
+ /Users/nnnnn/Library/Caches/com.apple.AddressBook/MetaData/.info+
+ The parser will retry as in 10.2, but the problem should be corrected in the plist.+
+Error in createMutableDictionaryValue:1012 for property 'URLs' 'XML parser error:+
+ Unexpected character = at line 1+
+Old-style plist parser error:+
+ Unexpected character '0x3d' at line 1+
+Aug 23 19:03:07 Ordinateur-2-nnnnn crashdump[465]: Exited process crashed+
+Aug 23 19:03:07 Ordinateur-2-nnnnn crashdump[465]: crash report written to: /Library/Logs/CrashReporter/Exited process.crash.log+
unquote
because of the "+not proper UTF8+" I tried to change it in AB preferences/vCard/encodage in "+proper UTF8+" and because of "+Old-style plist parser: error Unexpected character+" I tried to check and validate fonts of Fontbook. Unsuccessfully.
Back home, I searched on the web and read somewhere that there could be a problem with the "catalog" that could only be repaired by DiskUtility from the install disk. That was done today but the "*hard disk seems to be OK*" and AB crashed as usual when open.
there were two crash reports, one for AB and one for ABsync (? curious since she has no .mac account and does not sync her mobile phone).
The AB crashlog(1) finishes so :
quote
+Thread 3 Crashed:+
+0 <<00000000>> 0xffff0b54 __memcpy + 948 (cpu_capabilities.h:228)+
+1 ...apple.AddressBook.framework 0x9478a9f7 c4_Column::FetchBytes(long, int, c4_Bytes+
unquote
and the ABSync crashlog(2) :
quote
+Thread 0 Crashed:+
+0 <<00000000>> 0xffff0af6 __memcpy + 854 (cpu_capabilities.h:228)+
+1 ...apple.AddressBook.framework 0x9478a9f7 c4_Column::FetchBytes(long, int, c4_Bytes+
unquote
and finally when I asked her for a screenshot of her ~/Library/Application Support/AddressBook, I was surprised (comparing with my folder) to find she has three ABPerson.skIndexInverted files (I have only one) the second file is ABPerson.skIndexInverted.218 and the third ABPerson.skIndexInverted.286.
I suppose two are toomuch but which ones have to be delete ...
Sorry for this (too) long post and hope the light will come from some reader better educated in hard and softwares than us.
(1) (2) I have a longer version of these crashlogs but this post is already very long and I'll post them only on request (if needed)!

Hello Josy.
After fixing the filesystem issues, which you say you’ve already done, try re-creating the Address Book files that may have become corrupt, one at a time, as follows — or restore them from a backup if you have one:
1. Quit Address Book, Mail, and any other applications that might use Address Book for something. Or just quit all applications to be on the safe side.
2. In the Finder, go to ~/Library/Application Support/AddressBook/. Make a backup copy of this folder, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your contacts are stored.
3. Go to ~/Library/Preferences/. Move com.apple.AddressBook.plist and com.apple.AddressBook.abd.plist (if it exists) out of there (e.g. to the Desktop). Check whether the problem is fixed.
4. If Address Book keeps crashing, go to ~/Library/Caches/ and move the Address Book and com.apple.AddressBook folders to the Trash (there is no need to empty the Trash yet). Check whether the problem is fixed.
5. If Address Book keeps crashing, go to ~/Library/Application Support/AddressBook/ and trash any ABPerson.skIndex files you may see there. Check whether the problem is fixed.
6. If Address Book keeps crashing, try again trashing both AddressBook.data and any ABPerson.skIndex files that may have been re-created, then rename AddressBook.data.previous to AddressBook.data.
7. If Address Book keeps crashing, try moving the entire AddressBook folder out of ~/Library/Application Support/.
The above procedure may introduce synchronization issues if you use .Mac or iSync to synchronize your Address Book with other computers or devices, so be sure to back up your Address Book data now if the problem is fixed.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

Unable to check mark whole playlists to play since last update. ONly allows me to check one at a time. How do I fix?

While in MY MUSIC on itunes, all my music is unchecked. I can not check whole playlists by using the top checkmark to select all. I went to all my playlists, same thing. I can only press them ONE at a time, which will take about a day to check all of them.
any ideas? anyone have same problem? This just happened since last update.

I exactly have the same problem as this "Unable to check mark whole playlists to play since last update. ONly allows me to check one at a time. How do I fix?" I have a windows7. Please help.

Since last update of Pages, my Pages app in iPad anda iPhone doesn't open, it closes suddenly. I already deleted it and reinstalled, but still not works.

Since last update of Pages, my Pages app in iPad anda iPhone doesn't open, it closes suddenly. I already deleted it and reinstalled, but still not works.
Can someone help? Do I need to wait for another update?
Thanks

This is my problem that has to originate from the update. So glad that I did not purchase a MacBook! Apple products/apps are appearing to be not different from Windows products.
I have deleted and reinstalled from the device and desktop, resets, etc. When I uninstalled and reinstalled while connected to my desktop, the older version of pages was installed. I was able to see all of my files that were saved to the cloud. I was forced to update again to access any of the saved files. Once updated again, I could no longer open pages. It began, to open and abruptly shut down.

IMAC mirroring is not working with my IMAC and Apple TV since last update

Hi friends,
since last update I am facing problems with my IMAC and airplay via apple tv to my HD TV screen. It is not working. Only audio but not video. I believe it has something to do with IMAC mirroring, which is not possible to select only expanded desktop. Airply on my TV is working with my IPAD, so it should be a problem with my IMAC only.
Did someone of You make the same experience or know what to do?
Thanx in advance

Hello, H1Daisensei.
Thank you for visiting Apple Support Communities.
Here is an article that you may find helpful when experiencing this issue.
About AirPlay Mirroring in OS X
http://support.apple.com/kb/ht5404
Cheers,
Jason H.

Since last update 25/03/12, bank transactions difficulty

I bank on line with no problems in the pat. Since last update on my iMac 25/03/12, I have been unable to carry out transfer transactions between my accounts. With the following System Error notice: " Missin Plan ID in Transfer Details Construct" Pleaseclick BACK then use the browser refresh button to continue. Which did notwork. Bank rep tells me it is probably as a result of the up dates and I should contact Safari or use internet explorer instead. They say they do not support Safari! Can any one advise please what I should do?

Sorry I meant last update performed on 15/03/12!
I am running MAC OS X Version 10.6.8 and Safari Version 5.1.4 (6534.54.16).
The lady at IF bank customer service implied that the problem must be due to the latest update. She would not put me through to their IT deparment for help as she said they do not provide support for Safari. Intead she suggested go to Safari or Apple for help or we try using Internet Explorer or Firefox to resolve the problem.
We have been using Safari to do our online banking with IF for years without any difficulty until apparently since the last up date on 15/03/12. Since the bank does not appear to want to help. Surely the bank IT department and Apple/ Safari are in a better position to resove my difficulty with the updates than asking us novices to to change our browser? I did not even know that is noInternet Explore for Mac.
May I have some guidance on the best way to proceed please?

Since last update I do not have a "delete" button showing on a toolbar. Therefore, I cannot delete emails without opening them. Please help.

Since last update I do not have a "delete" button showing on a toolbar. Therefore, I cannot delete emails without opening them. Please help.

Ask Apple to re-enable it. I had an unauthorized purchase last October. They disabled my account until the problem was solved. However, I asked them to reopen it, and they just asked me to provide some security information (billing address, a recent purchase you made, etc.), and then they re-enabled it.

Wifi dropping constantly since last update

My wifi has been dropping off every five minutes since last update. My current system version is Mac OS X 10.6.8 (10K549).
Second me if anyone experienced the same problem.
p.s. I've been to the system log.
Here is the latest log on the dropping off.
Mon Oct 17 15:05:58: <configd[13]> _SC_callback: Changed keys = { 'State:/Network/Service/6D1F04B5-545F-4D4A-A5BD-7EB81C15EF4D/DHCP' }
Mon Oct 17 15:05:58: <airportd[296]> _APXMIGwakeupAirPortdServer: received 'SC callback'
Mon Oct 17 15:05:58: <airportd[296]> process_sc_callback: Processing 'State:/Network/Service/6D1F04B5-545F-4D4A-A5BD-7EB81C15EF4D/DHCP'
Mon Oct 17 15:05:58: <airportd[296]> process_dhcp_changes: State:/Network/Service/6D1F04B5-545F-4D4A-A5BD-7EB81C15EF4D/DHCP
Mon Oct 17 15:05:58: <airportd[296]> process_dhcp_changes: DHCP airport_changed = 1
Mon Oct 17 15:05:58: <airportd[296]> setDHCPMessage: dhcpInfoKey "State:/Network/Interface/en1/AirPort/DHCP Message" = (null)
Mon Oct 17 15:06:16: <kernel> IO80211ScanManager::scanDone: Scheduling cache purge timer in 30 seconds.
Mon Oct 17 15:06:16: <configd[13]> _bsd_80211_event_callback: LINK_CHANGED (en1)
Mon Oct 17 15:06:16: <airportd[296]> _APXMIGwakeupAirPortdServer: received 'Driver callback'
Mon Oct 17 15:06:16: <airportd[296]> process_driver_callback: link changed
Mon Oct 17 15:06:16: <configd[13]> _bsd_80211_event_callback: SSID_CHANGED (en1)
Mon Oct 17 15:06:16: <airportd[296]> _APXMIGwakeupAirPortdServer: received 'Driver callback'
Mon Oct 17 15:06:16: <airportd[296]> process_driver_callback: SSID changed
Mon Oct 17 15:06:16: <configd[13]> _bsd_80211_event_callback: BSSID_CHANGED (en1)
Mon Oct 17 15:06:16: <airportd[296]> _APXMIGwakeupAirPortdServer: received 'Driver callback'
Mon Oct 17 15:06:16: <airportd[296]> process_driver_callback: BSSID changed
Mon Oct 17 15:06:16: <configd[13]> _btUpdateCoexMode: <Mac-F2268AC8><MacBookPro5,5> Clamshell state off, Bluetooth Bandwidth Utilization is <0>, LWM <5>, HWM <25>
Mon Oct 17 15:06:16:
Mon Oct 17 15:06:16: <kernel> en1: Received EAPOL packet (length = 135)
Mon Oct 17 15:06:16: <kernel> inputEAPOLFrame: 0 extra bytes present in EAPOL frame.
Mon Oct 17 15:06:16: <kernel> inputEAPOLFrame: Received message 1 of 4
Mon Oct 17 15:06:16: <kernel> FULL RSN IE FOUND:
Mon Oct 17 15:06:16: [00000000] 30 14 01 00 00 0F AC 04 01 00 00 0F AC 04 01 00 00 0F AC 02 00 00
Mon Oct 17 15:06:16: <kernel> storeFullRSNIE: getAP_IE_LIST returned 0
Mon Oct 17 15:06:16: <kernel> PMK:
Mon Oct 17 15:06:16: [00000000] 5C A1 63 99 69 5C ED FC 4F A5 E2 F9 E3 4A 89 F3 B4 92 96 EF F0 59 B5 3E 14 41 0A 5C 29 BA
Mon Oct 17 15:06:16: [0000001E] 06 9D
Mon Oct 17 15:06:16: <kernel> TPTK:
Mon Oct 17 15:06:16: [00000000] 43 B0 AE DA 97 44 08 C2 61 0C B8 87 D2 1F 70 4D 5F 27 B3 69 66 81 94 F0 94 BE 17 5A 32 47
Mon Oct 17 15:06:16: [0000001E] 1D 1B 72 AE 46 51 D0 1B 78 BB E6 10 EF 39 7A 1C A4 AF 30 5C 85 80 5D 9A A2 AC B3 4D E8 E4
Mon Oct 17 15:06:16: [0000003C] 6C 53 15 84
Mon Oct 17 15:06:16: <kernel> KEY MIC:
Mon Oct 17 15:06:16: [00000000] 15 A4 7B F8 BE 64 0E 0F BD 5F 5B D4 6C CB 05 3D
Mon Oct 17 15:06:16: <kernel> process1of4: sending replyPacket 135 bytes
Mon Oct 17 15:06:16: <kernel> en1: Received EAPOL packet (length = 169)
Mon Oct 17 15:06:16: <kernel> inputEAPOLFrame: 0 extra bytes present in EAPOL frame.
Mon Oct 17 15:06:16: <kernel> inputEAPOLFrame: decrypting key data
Mon Oct 17 15:06:16: <kernel> inputEAPOLFrame: Received message 3 of 4
Mon Oct 17 15:06:16: <kernel> process3of4: Performing IE check.
Mon Oct 17 15:06:16: <kernel> process3of4: sending replyPacket ( len = 113 ).
Mon Oct 17 15:06:16: <kernel> process3of4: received pairwise GTK
Mon Oct 17 15:06:16: <kernel> ptkThread: Sleeping!
Mon Oct 17 15:06:16: <kernel> ptkThread: Sleeping!
Mon Oct 17 15:06:16: <kernel> ptkThread: Installing PTK!
Mon Oct 17 15:06:16: <kernel> PTK:
Mon Oct 17 15:06:16: [00000000] 72 AE 46 51 D0 1B 78 BB E6 10 EF 39 7A 1C A4 AF
Mon Oct 17 15:06:16: <kernel> ptkThread: Installing GTK!
Mon Oct 17 15:06:16: <kernel> installGTK: setting cipher key (flags = 0x0)
Mon Oct 17 15:06:16: <kernel> RSC:
Mon Oct 17 15:06:16: [00000000] 00 00 00 00 00 00
Mon Oct 17 15:06:16: <kernel> GTK:
Mon Oct 17 15:06:16: [00000000] 91 79 A7 59 85 4A 61 28 11 A7 96 51 E0 CD F7 1D
Mon Oct 17 15:06:16: <configd[13]> _bsd_80211_event_callback: BSSID_CHANGED (en1)
Mon Oct 17 15:06:16: <airportd[296]> _APXMIGwakeupAirPortdServer: received 'Driver callback'
Mon Oct 17 15:06:16: <airportd[296]> process_driver_callback: BSSID changed
Mon Oct 17 15:06:16: <configd[13]> _btUpdateCoexMode: <Mac-F2268AC8><MacBookPro5,5> Clamshell state off, Bluetooth Bandwidth Utilization is <0>, LWM <5>, HWM <25>
Mon Oct 17 15:06:16:
Mon Oct 17 15:06:16: <configd[13]> _bsd_80211_event_callback: LINK_QUALITY (en1)
Mon Oct 17 15:06:17: <configd[13]> _SC_callback: Changed keys = { 'State:/Network/Service/6D1F04B5-545F-4D4A-A5BD-7EB81C15EF4D/DHCP' }
Mon Oct 17 15:06:17: <airportd[296]> _APXMIGwakeupAirPortdServer: received 'SC callback'
Mon Oct 17 15:06:17: <airportd[296]> process_sc_callback: Processing 'State:/Network/Service/6D1F04B5-545F-4D4A-A5BD-7EB81C15EF4D/DHCP'
Mon Oct 17 15:06:17: <airportd[296]> process_dhcp_changes: State:/Network/Service/6D1F04B5-545F-4D4A-A5BD-7EB81C15EF4D/DHCP
Mon Oct 17 15:06:17: <airportd[296]> process_dhcp_changes: DHCP airport_changed = 1
Mon Oct 17 15:06:17: <airportd[296]> setDHCPMessage: dhcpInfoKey "State:/Network/Interface/en1/AirPort/DHCP Message" = (null)
Mon Oct 17 15:06:18: <configd[13]> _SC_callback: Changed keys = { 'State:/Network/Service/6D1F04B5-545F-4D4A-A5BD-7EB81C15EF4D/DHCP' }
Mon Oct 17 15:06:18: <airportd[296]> _APXMIGwakeupAirPortdServer: received 'SC callback'
Mon Oct 17 15:06:18: <airportd[296]> process_sc_callback: Processing 'State:/Network/Service/6D1F04B5-545F-4D4A-A5BD-7EB81C15EF4D/DHCP'
Mon Oct 17 15:06:18: <airportd[296]> process_dhcp_changes: State:/Network/Service/6D1F04B5-545F-4D4A-A5BD-7EB81C15EF4D/DHCP
Mon Oct 17 15:06:18: <airportd[296]> process_dhcp_changes: DHCP airport_changed = 1
Mon Oct 17 15:06:18: <airportd[296]> setDHCPMessage: dhcpInfoKey "State:/Network/Interface/en1/AirPort/DHCP Message" = (null)
Mon Oct 17 15:06:21: <configd[13]> _bsd_80211_event_callback: LINK_QUALITY (en1)
Mon Oct 17 15:06:26: <configd[13]> _bsd_80211_event_callback: LINK_QUALITY (en1)

It's likely that the update included new definitions or profiles for wifi that your routers are having trouble with. This doesn't indicate that anything is broke, just that iPhones on the newest software are going to have issues with that configuration of wifi. If you have access to your router's settings, try connecting on a different chanel or disabling the security to see if the phone connects that way. http://support.apple.com/kb/HT4199 has some recomended settings, but you may find that changing the name of your network or the security that you are using will fix this issue.

Since last update , I can't see any thing any more

Since last update , I can't see any thing any more, but I can hear sound and music, and I can see my mouse change to the arrow in order to clic. Windows 7, explorer 9, flash player 11.6, I follow your prost it in order to fix it with out go result. What to do? I try to find a previous update for try, but I can't find it.
Thank for reading

fadesone28 wrote:
i did the last update 2 days ago with the whole removing older versions of flash and what not, now my whole internet looks different and i cant sign into latest version of yahoo home page for my mail or anything , any help or can i un-update?
You can always revert your system to how it was 2 days ago by reinstalling from your Time Machine Backup. Otherwise I would be having a read through the Yahoo Troubleshooting forums for people who may have a similar problem.
Pete

Problems while roaming since last update of an iPhone 5

Similar Messages

Maybe you are looking for