Problems whit the fixed green light

hi everyone,
i bought a Airport Express just to configure my printer and my stereo,
but i started to conigure the AE whit no Internet Conection, after a few tries i manage to configure and after the update i got a fixed green light, but when i try rescan at the Airport Utility i can't find my AE.
Any ideas to what happened?
thanks
Alan

Temporarily, try connecting an ethernet cable from your computer to the Express to see if that helps AirPort Utility find the Express.
It may also help to restart both the Express and your computer.

Similar Messages

I have lost the amber/green light indicator on AirPort Express. How canI get it back?

How can i get the amber/green light indicator on the AirPort Express. It has stopped working.

If I do a factory reset, will I have to reset the network configuration?
Yes, but based on what you are telling us, I doubt that the device will restart after you try this. You have tested with other AC wall jacks, correct?
I just purchased the unit in April this year, it would be very soon to have to replace it, especially since I don't think I kept the receipt...
Most stores keep a record of purchases. Otherwise, Apple support can look at the serial number and know approximately when the device was sold. You should have no problem getting a replacement, I would imagine.

Hi, in my asus memo pad hd 7 i have some problems whit the videos, they run but whit many stripes in image

hi, in my asus memo pad hd 7 i have some problems whit the videos, they run but whit many stripes in image.
what can a i do?
the firefox is apdated.
thank you

Thank you for the update, the fix will be in the release version of Firefox on 2015-02-24.
In the mean time if you want to continue using Firefox beta our Sync service may be helpful getting your Firefox release data into Firefox beta. https://support.mozilla.org/en-US/kb/how-do-i-set-up-firefox-sync

How do I select the AX green light to flash on data?

I am using Airport Utility 6.2 on a MBA in a network consisting of a 4th Gen AE extended by a 1st Gen AX and I cannot seem to find the option to change the AX green light to flasj on data. What am I missing?

AirPort Utility 6.2 does not provide this type of feature.
If you install AirPort Utility 5.6, you could use that version to set up the AirPorts to flash green on activity. AirPort Utility 5.6 was designed to run on the Lion operating system. You will need to use a workaround mentioned in the link below if you want to install AirPort Utility 5.6 on Mountain Lion, since Apple's installler will not allow you to do this.
This is not supported by Apple. It does work for me as well as others, but there is no way to predict whether it might work for you.
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

When enabled, the flashing green light. And the player does not play music. Also no sound, no voice control...

When enabled, the flashing green light. And the iPod does not play music. Also no sound. But iTunes see my device, and i can synchronize it. Can you halp me?

Have you tried resetting the Shuffle to see if that makes any difference?
Resetting iPod shuffle
Brock

HT4060 my i pad show the charging green light .it works properly .however it was 37% battery charged and i tried to charge it .but it refused to charge .pls help .i had the same problem a while ago and then suddenly it charged on its on .pls help

my i pad is not charging ,however it shows the green light and charging signs
.before i had this problem, then it started charging on its own . now i was abroad it was 37% charged .was going to charge it for the journey and it stopped charging again .but it works excellent except for the charging .it still works but i am not using it now .just left it on the charger .the green light and the battery sign shows its charging ,but the i pad now is 35% the battery power .pls help .i cant aford another pad .i am broke and i am so much used to it

It may just be giving you false battery info. Unless it actually dies prematurely, Its just a software error. I would recommend restoring. http://support.apple.com/kb/ht1414

My .5tb Time Capsule's orange light is flashing. The internet and everything utelse is working fine, and I'm all backed up, so howcome it doesn't show the solid green light? What should I do?

The orange light has been flashing for a couple days, and even if I unplug everything (Time Capsule & modem) and plug it all in again, still the flashing orange light. I'm sure it should be solid green. The internet connection seems to be working fine, so I'm wondering what's happening. What should I do?

I don't think Apple will want it.. you can sell it on ebay etc.. but it is not worth a lot.
Your TC needs a new power supply but it is now uneconomic to fix them. Apple do not supply any parts for their repair network.
If you want to repair it yourself you can ..
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair

Does anybody know if i buy a new one iphone 4g, it will have problems whit the "antennagate"?

i want to buy a new one iphone 4g, but i'm afraid that it cames whit the famous antennagate, does any body know if the problem is fixed?

The question scarcely needs a reply. Tens of millions of iPhones have been sold since that particular media frenzy. Just buy one. Or not. There is a return period and a 12 month warranty if you believe it is suffering from some currently popular malaise.

Ipod keeps giving me the flashing Green light when connected.

I think my first gen shuffle is dead. It's the long white one with the built in USB port. It connects via USB and when I plug it into the computer the computer doesn't recognize it at all. It completely ignores the ipod, the green light on the front of the ipod is flashing continuously. Any ideas? Itunes or Windows won't see the ipod. I'm stumped.

Nevermind people. I figured out what it was. I had got a new usb cable and I've been trying to plug the shuffle into it and it never would work. Well I tried plugging the shuffle into the usb port itself and it still didn't work. But just for **** and giggles I dug out my old usb cable and sure enough my computer and itunes will see the ipod. It's weird cause the new usb cable worked earlier today with my little cousin's ipod. I don't understand why it won't work with mine and I really don't care. I'll keep using the old one. Thanks away guys.

Cr52-A2 problem whit the new firmware(1.80D)

hello all
i having a problem whit my cd-rw
maybe one of you guys can help me cuse i'm breaking my had hear
i flashed the firmware from 1.60D to 1.80D
and my cd-rw stop working
the chiki boaster doesn't want me to open him also
i want the old version
give me back my 1.60D
p.s.
maybe ther's a way to reset the cd-rw
ha
what are you fox thinking

Hi
There is a note at the bottom of the page:
Note: You should not update your firmware unless you have
have flash experience with your optical drive.
But, I will try to download firmware from my girlsfriend's drive. That is the same type. And think that is 160D.
Tsibi

Problems whit the LookAndFeel

Hi, i'm creating a GUI using Netbeans (windows xp), I want to use the cross plataform look and feel, so i write this code:
public static void main(String args[]) {
        java.awt.EventQueue.invokeLater(new Runnable() {
            public void run() {
                try {
                   UIManager.setLookAndFeel(UIManager.getCrossPlatformLookAndFeelClassName());
                } catch(Exception e) {
                System.out.println("Couldn't use that look and feel.");
                setDefaultLookAndFeelDecorated(true);
                new NumeroCiclos().setVisible(true);
    }It work's OK, this is the picture of the window:
http://i55.photobucket.com/albums/g143/joserafa83/MetalLnF.jpg
But when i use the JOptionPane the look and feel is like the windows xp:
http://i55.photobucket.com/albums/g143/joserafa83/errorLnF.jpg
String time = jTextTime.getText();
        String freq = jTextFrequency.getText();
        double t = 0;
       try
            t = Double.parseDouble(time);
       catch(NumberFormatException e)
          JOptionPane.showMessageDialog(null,"cuidado","Error",JOptionPane.ERROR_MESSAGE);
           jTextTime.requestFocus();
       }        What can I do to fix this look and feel problem??
Thanks

When you change the look and feel I think you have to update the Component tree with
SwingUtilities.updateComponentTreeUI(Component c)or the component you changed the look and feel of will have the new look and feel, and some or all of its child components will retain their previous look and feel. I think as of either JDK 5 or 6, the default look and feel is the native one returned by
UIManager.getSystemLookAndFeelClassName()(I'm not completely sure about this) which means until you make the call above, some or all of the child components will have the native look and feel and the component itself will have the cross platform look and feel.
For more information about the Swing architecture, visit Sun's "A Swing Architecture Overview" at:
http://java.sun.com/products/jfc/tsc/articles/architecture/

Problem with the yellow flashing light on AirPort Extreme

I'm trying to use my AirPort Express and have a yellow flashing light. I contacted ISP and we tested the connection by plugging the modem into a PC directly, so there is a working connection. I tried the Airport utility and it identified an error, stating that no connection could be made
I'm not sure where to go with this, my understanding is that the AirPort Express should have no trouble communicating with modems, so it can't be an issue of hardware.
Any suggestions very welcome!

Whenever you change whatever device is connected to your modem, be sure to power down the modem first.
It will refuse to communicate with anything else, unless you do.

I got problem whit the detonator and windows XP (K7T Pro2 Ver:1.0)

I have windows XP, when i install the drivers for Geforce 2 MX 200 and reboot the machine for frist time I NEVER SEE MY WINDOWS ANYMORE!!!!
I have:
MSI K7T pro 2 ver: 1
512MB SDRAM PC 133
Sound Blaster PCI 128
Geforce 2 MX 200 (32MB)
Amd 1.2 GHz
Windows XP
PD: HELP!!!!

I had similar problems a while back.. the problem was that the refresh rate was to high and it wouldn't go into 60Hz even in safe mode.. I switched the monitor to a newer with PnP and then the driver lowered the refresh rate.. (I had hacked together a own .inf file for the first monitor and it has only BNC so no PNP)

What's the little green light next to the camera mean?

Sometimes it's on; other times its not. Also: it's on when I have Mission Control focused on a particular desktop -- or so it seems.

It means the camera is on and some program is using it.
Captfred
Facetime, Photobooth, ichat or messages, skype are a few that use it.

Problems with the Fixed Optical Disk Drive

I have a Tecra A4, DVD DOES NOT operate, does not read any DVD or CD-ROM and the computer display following error message indicating: Device is not accessible the request could not be performed because of an I/O device error. Any suggestions? lhidalgoa

Since Apple says that some copy protected DVD's will not function with Disk Sharing, you may need to "clone" the DVD, using the MBP, to a flash drive, and use the flash drive to perform the installation of the software.
Another alternative is to download and install the Trial version from the Microsoft Office For Mac website, and then use the activation code provided with the DVD to activate the full version install of the trial.

Problems whit the fixed green light

Similar Messages

Maybe you are looking for