Problems whit Time Machine in OSX 10.8.2.

Hello, i have randomly problems whit Time Machine in OSX 10.8.2. The drive is then read only. After a disconnect and a new connect the problem is solved. Peter

The drive is probably failing and should be replaced.

Similar Messages

HT1338 problems with time machine and parallels desktop, mac osx mountain lion 10.8

have a good day, i have been problems with time machine and parallels desktop, dont work in mac osx 10.8, i upgrate two mac´s (macbook air, imac), in the two machines shows problems, could you help me please.
two machines have good ram memory (macbook air 11.1 2010 early , imac 2009 late).
i am waiting for your help.
thanks.
Jesus.

Take a look here:
http://pondini.org/TM/Troubleshooting.html
Specifically, you'll probably want to try item #A5 on that page, but there's a lot of other info there that may be useful.

Problems using time machine.

Hello, I have problems using time machine.
When a backup takes too long to start. After a long time only been backed a few MB's.
My version is 10.9.1 Osx
someone can help me.

Hello ElGomo,
We've an article that provides a few useful tips that can help in just such a situation.
OS X Mavericks: If Time Machine is slow
http://support.apple.com/kb/PH14169
Cheers,
Allen

Problems with Time machine caused by removing PKCS11.log?

I haven't yet found a solution to my Time Machine no longer backing up: "while an error occurred while copying files to the backup disk"
I requested help before, but so far nobody could help me solve this problem!
I noticed that I removed, in a file clean up, a log file: PKCS11.log."
I still have this file in the Trash but can not restore this file from Trash to its original location because I don't know its original location. The command" restore", or "put back" does not figure in the menu of Trash.
It can be that the removal of this log file causes the back up problem in Time Machine?
As you will notice from the above, I know very little about software and subjects like this and hope that somebody can help me to get Time Machine backing up again.
Thanks on beforehand!
Harry

I am sorry that my message is presented in this "step-by-step way, but it can be that the following lessage from TM Buddy Widget is important?
Starting standard backup
Attempting to mount network destination using URL: afp://Harry%[email protected]/Data
Mounted network destination using URL: afp://Harry%[email protected]/Data
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Data/Harry Briels’s iMac.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
No pre-backup thinning needed: 8.22 GB requested (including padding), 464.29 GB available
Indexing a file failed. Returned 200 for: /Library/Application Support/Adobe/Adobe PCD/cache/cache.db, /Volumes/Time Machine Backups/Backups.backupdb/HarryBrielsiMac/2013-07-04-181224.inProgress/46F8E230- 1335-4D3C-BA4F-E6A4B2AB0C07/Macintosh HD/Library/Application Support/Adobe/Adobe PCD/cache/cache.db
Aborting backup because indexing a file failed.
Stopping backup.
Copied 86 files (266.0 MB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11
Ejected Time Machine disk image.
Ejected Time Machine network volume.
Harry

Problem using Time Machine with Seagate BackUp Plus Pls HELP!!

I have a late 2006 iMac (running OS 10.5.8) & am trying to back up using Time Machine with a new Seagate BackUp Plus drive. When I select the Seagate drive in Time Machine it tells me I msut first erase the (Seagate) disk. When I hit ERASE, I get a Time Machine error : COULD NOT UNMOUNT DISK. I see from various posts that 10,5 & 10,6 have issues with some external drives so want to upgrade to Mavericks (to get around this incompatibility issue): HOwever apparently my iMac is too old (by 1 year) to allow this. Can anyone give me any advice on how to get my iMac content backed up via Time Machine using the Seagate BackUP PLus drive I bought (becasue it is supposedly "compatible with PCs & Macs".
Thank you!!
Wendy

Your Seagate drive should work just fine. If it doesn't have any important data on it, try re-formatting it with Disk Utility to blank it out. Or run the Disk verify/repair and see if you can get it to fix any problems.
I have a Drobo FS too. You probably need a firmware update, they issued one a while back to fix problems with Time Machine. Use the Dashboard or download it from their support site, http://www.drobo.com/support/updates.php
Just curious how long you let it run after it "stalled". If it is a big file it could just be taking a while to copy over, do you see activity lights on the USB drive? The first time you use time machine let it run overnight, it's going to take a while, after that it will update quickly.
While you're at it, you might want to verify your start-up disk too with Disk Utility.

Problem with Time Machine/Finder not finding and (keeping) remote drive

I have a Mac Pro and hooked 2 Western Digital My Book 750GB drives via Firewire onto it to use as my time machine backup for the two MBP's in the house.
The problem I run into may be more network related than Time Machine related. I have the file sharing turned on in Mac OS 10.5.2. I am able to select Mac Pro in Finder on each MBP and then under that select my Time Machine drive. Then within Time Machine I can select the My Book as my Time Machine drive. At this point I have no problem using Time Machine.
Where the problem occurs is if I use Finder to browse other drives such as an Internal Drive I have in my MBP or my Mac Mini's drive it no longer can find the Time Machine drive. It just is like it loses sight of it somehow. All I need to do is once again go to Finder/Mac Pro and then select the specific Time Machine drive and then Time Machine is fine again.
How can I get around this? It seems i have to make some type of permanent logon or so to this drive.

1. try plugging in directly (think you did this already)
2. try a different cable - switch to the one you know works.
3. try a different port on the case.
4. does the faulty one power up at all? can you hear the drive spinning?
5. try switching to the good power adapter if you are not seeing action under #4.
there may also be a reset button on the board or case.
if these are not working, then the bridgeboard has died in the case. there is a board that the drive plugs into that gives you the firewire, usb connections, etc. the drive likely hasn't failed, you just need a new bridgeboard or case, as I doubt maxtor will sell you just that part. the drive can be pulled & put into another case.
check out macsales.com if you need a new case.

Problem with Time Machine Backup or Maybe Not Time Machine

The problem manifests after a Time Machine backup.
I have an iMac 24-inch, Early 2008. iMac 8,1
Intel Core 2 Duo, 4GB RAM.
Last week I purchased two 4-Terabyte G-technology G-Drives. Each drive is equip with FireWire 800 and USB 3.0/2.0. In general use they seem to work fine on the iMac.
I designated one drive as a Time Machine Volume. This is where the problem happens.
Time Machine will do the initial backup just fine. Then it runs once per hour with no problem. Intermittently however, Time Machine will fail and report :
“Time Machine couldn’t complete the backup to “hard disk name”.
Unable to complete backup. An error occurred while creating the backup folder.”
Interestingly enough if I try to open a folder on the Time Machine volume using the Finder I get:
“The operation can’t be completed. An unexpected error occurred (error code -50).
If I try to eject the volume I get the irksome “Cannot eject volume because it’s currently in use by one or more programs.”
To resolve this I’ve tried everything, from the banal verifying permissions, to swapping the two G-Drives around, swapping out all the cables, etc.. When the error occurs I go into the shell and check with lsof and always find no software apparently holding or using that volume.
Very frustrating
I can force eject the volume, then remount the volume and things are back to normal. Same with restarting.
This happened under OS X Mountain Lion and is now happening under a clean install of Mavericks.
I thought that even though I don’t see any MDS related processes using the drive, it might be spotlight, so I told spotlight not to index the volume. Problem still happens.
I’ve found that one person had almost this exact same problem at:
https://discussions.apple.com/thread/4756742
His solution turned out to be replacing the G-Drive with another brand new G-Drive.
Unfortunately, I cannot return the drives to the Apple store because the boxes were tossed out. I also don’t relish trying to explain that the drives work just fine until some glitch that occurs either just before or just after a Time Machine backup.
Does anyone have any suggestions?

You can also contact G-Drive while the drives are under warranty (one year I believe).
I have the same problem using Time Machine with the 2T G-Drive and my MacBook Pro. G-Tech emailed me a Firmware Update Utility app and, when that didn't solve the error message problem, they sent me a replacement drive and new cables, twice. The problem persisted; I get one or two backups each day and then the error message. I also can't copy anything to the drive and have to force eject it, so G-Tech suggested I see how well it worked with the USB cable.
Time Machine works flawlessly with the USB cable and the G-Drive, so G-Tech suggested it is a problem with my Firewire 800 port. I worked with Apple Care over the phone, doing all the tests suggested in Eric's post - testing with Disk Utility, Time Machines interface with my User Accounts, the Operating System, then resetting Time Machine, etc. and then I took it to the Genius Bar so they could run the tests themselves. All looked like it should be fine (but they were using a 1T G-Drive and all testing was done within 30 minutes)...when I got home, after two good backups, I got the error message again.
Apple Care finally suggested I make a Genius Bar appointment and sit at the store working with my MacBook, the G-Drive and Time Machine running until I got the error message, to prove the only thing left that could possibly be the cause of the problem, is the port. I did this last Wednesday.
It is 9 days later and I got my computer back this afternoon...the logic board was replaced because the Firewire 800 port is attached to it...I got my first Time Machine back up at 5:34pm...and the error message again at 7:34pm.
The only solution, it seems, is to use the USB cable instead of Firewire. USB and Thunderbolt seem to be the direction Apple is taking, which is why so many people have been posting about this problem, here and elsewhere, with no real solutions from Apple. See this article: http://www.infoworld.com/t/mac-laptop/how-cope-the-end-of-firewire-205957
I hope the USB works for you too.

Can't force quit applications problem during Time Machine backups

I've run into a frustrating problem with Time Machine. I'm using an external 750gb USB hard drive as a backup disk with my Mac Mini; the connection is visa the Firewire 400 port.
When I'm doing anything that's CPU-intensive while a Time Machine is backing up, it is a 50-50 chance that one or more applications will crash. It is impossible to Force Quit them, which means that it is impossible to log out or shut down. The user is faced with a choice: Kill the whole system, and risk corrupting the system hard drive, or yank out the Time Machine disk's connector, and risk corrupting the Time Machine backup. Of course the latter is preferred, and that's what I've done. Thus far, I haven't seen any corruption on the Time Machine drive, fortunately, but in order to work with my system, I have had to disable Time Machine backups while I am working. (I reconnect the Time Machine drive overnight.)
I know from some Google searching that others are experiencing this problem. My question is, has anyone figured out why this is happening, or developed a workaround?
Regards,
Bryan

In the process of restoring my MacBookPro from an external TM drive as we speak. I can say with almost 100% certainty that force restarting (holding the power-button down until the book shuts off) will corrupt your start up disk to some extent.
My problem is that I was away from my network when TM tried to do an update. I'm not sure if TM was actually able to connect to my server but none the less I was on a verizon wireless card and so even a minor backup would have been slow.
I needed to shut the computer down and leave. I have had TM hang when trying to shut down and tried to tell it to stop the back-up (which it tries to do for hours on end and have had to force quit before... had to run disk first aid that time) So this time I figured Id leave the computer on (though unplugged) while I drove home.
I did not close the case until the screen went dark. Unfortunately, it had just gone to sleep (a half hour later) instead of shutting off but I did not know that at the time so I shut the case then.
When I plugged it in in the AM it was dark but not black... I could just see the screen and could see it was frozen. Force restart completely screwed my startup disk. Luckily I have a BU from the night before.
Maybe TM should also be linked to the location, and or connection you are using. So, if I am away from my LAN it will automatically turn off. I also wish I could set it to back up every x hours instead of every hour.
Good idea... just needs some work on the routines. (only an hour left on my restore now)

Slow backup (and spotlight problems) after time machine restore

Hi All,
After having some shaky moments with my macbook pro's internal hard drive, I have now installed a new one. I am running the latest version of 10.6.8.
The machine is running fine after a restore from my Time machine backup, but there are a few problems:
1) Time machine is now making a new backup - it looks like it wants to do a complete backup, which is ok as I have the space. However, after about 30 mins it has completed 156k and is now running at about 1k a second (or less).
2) Spotlight is reindexing, but appears to be stuck on "Estimating indexing time".
3) I tried opening mail, and it said it had to convert my mailbox - it got part way through the number of messages and stopped. I force quite, I'll try that one again later.
Any ideas for 1) and 2) above? I can't see any odd looking messages in the console...
Cheers

So... thought I'd update this since it may help someone else later...
The time machine backup completed fine in the end - it looked like it wanted to do a complete backup but I think it just did a delta in the end.
The spotlight reindex ran for about another 6 hours, judging by the console messages.
However, now I'm trying to run mail - and it's stuck on importing the mailbox - it got to 14157 of 57904 and stopped there. The "time remaining" is increasing by about 5 minutes every minute....
I've seen the following message in the console, which I also saw while it was trying to do the spotlight index last night:
NSDataMessageStore: couldn't find body
Anyway, I'll let it run and see what happens...

Another problem with Time Machine

This is the second time I have experienced the following problem with Time Machine. After 2 months of backups it gets to a point where backups fail and I cannot enter time machine. In each instance I have only used 110GB of the 500GB space.
Is there a better solution to fixing this problem than deleting the sparsebundle? That seems to be the only way to get it to back up again.

backup is failing again:
Oct 28 08:39:58 MBA /System/Library/CoreServices/backupd[8307]: Starting standard backup
Oct 28 08:40:02 MBA /System/Library/CoreServices/backupd[8307]: FSMatchAliasBulk returned 0 while resolving alias to backup target
Oct 28 08:40:07 MBA /System/Library/CoreServices/backupd[8307]: Backup failed with error: 19
Oct 28 09:22:57 MBA /System/Library/CoreServices/backupd[8464]: Starting standard backup
Oct 28 09:22:58 MBA /System/Library/CoreServices/backupd[8464]: Network mountpoint /Volumes/MPTC not owned by backupd... remounting
Oct 28 09:22:59 MBA /System/Library/CoreServices/backupd[8464]: Network volume mounted at: /Volumes/MPTC-1
Oct 28 09:22:59 MBA /System/Library/CoreServices/backupd[8464]: Backup requested due to disk attach
Oct 28 09:23:28 MBA /System/Library/CoreServices/backupd[8464]: Disk image /Volumes/MPTC-1/MBA_001f5bd2c764.sparsebundle mounted at: /Volumes/Backup of MBA
Oct 28 09:23:32 MBA /System/Library/CoreServices/backupd[8464]: Backing up to: /Volumes/Backup of MBA/Backups.backupdb
Oct 28 09:23:32 MBA /System/Library/CoreServices/backupd[8464]: Backup requested due to disk attach
Oct 28 09:25:44 MBA /System/Library/CoreServices/backupd[8464]: No pre-backup thinning needed: 242.1 MB requested (including padding), 351.94 GB available
Oct 28 09:41:34 MBA /System/Library/CoreServices/backupd[8464]: Copied 990 files (72.4 MB) from volume MacBook Air HD.
Oct 28 09:41:35 MBA /System/Library/CoreServices/backupd[8464]: No pre-backup thinning needed: 159.6 MB requested (including padding), 351.94 GB available
Oct 28 09:44:09 MBA /System/Library/CoreServices/backupd[8464]: Bulk setting Spotlight attributes failed.
Oct 28 09:46:13 MBA /System/Library/CoreServices/backupd[8464]: Copied 879 files (2.2 MB) from volume MacBook Air HD.
Oct 28 09:47:18 MBA /System/Library/CoreServices/backupd[8464]: Starting post-backup thinning
Oct 28 09:49:15 MBA /System/Library/CoreServices/backupd[8464]: Deleted backup /Volumes/Backup of MBA/Backups.backupdb/MBA/2008-10-27-090710: 351.94 GB now available
Oct 28 09:50:46 MBA /System/Library/CoreServices/backupd[8464]: Deleted backup /Volumes/Backup of MBA/Backups.backupdb/MBA/2008-10-27-061332: 351.94 GB now available
Oct 28 09:52:53 MBA /System/Library/CoreServices/backupd[8464]: Deleted backup /Volumes/Backup of MBA/Backups.backupdb/MBA/2008-10-27-050805: 351.94 GB now available
Oct 28 09:52:53 MBA /System/Library/CoreServices/backupd[8464]: Post-back up thinning complete: 3 expired backups removed
Oct 28 09:52:53 MBA /System/Library/CoreServices/backupd[8464]: Backup completed successfully.
Oct 28 09:53:11 MBA /System/Library/CoreServices/backupd[8464]: Attempt to eject diskimage failed with status: -47, dissenting pid: 0
Oct 28 10:23:16 MBA /System/Library/CoreServices/backupd[8603]: Starting standard backup
Oct 28 10:23:19 MBA /System/Library/CoreServices/backupd[8603]: Network volume mounted at: /Volumes/MPTC-1
Oct 28 10:23:27 MBA /System/Library/CoreServices/backupd[8603]: Disk image /Volumes/MPTC-1/MBA_001f5bd2c764.sparsebundle mounted at: /Volumes/Backup of MBA
Oct 28 10:23:27 MBA /System/Library/CoreServices/backupd[8603]: Backing up to: /Volumes/Backup of MBA/Backups.backupdb
Oct 28 10:23:28 MBA /System/Library/CoreServices/backupd[8603]: Error: (-50) Creating directory 2008-10-28-102328.inProgress
Oct 28 10:23:28 MBA /System/Library/CoreServices/backupd[8603]: Failed to make snapshot container.
Oct 28 10:23:33 MBA /System/Library/CoreServices/backupd[8603]: Backup failed with error: 2
Oct 28 10:23:33 MBA /System/Library/CoreServices/backupd[8603]: Attempt to eject diskimage failed with status: -47, dissenting pid: 0
Oct 28 11:23:16 MBA /System/Library/CoreServices/backupd[8729]: Starting standard backup
Oct 28 11:23:16 MBA /System/Library/CoreServices/backupd[8729]: Network volume mounted at: /Volumes/MPTC-1
Oct 28 11:23:20 MBA /System/Library/CoreServices/backupd[8729]: Disk image /Volumes/MPTC-1/MBA_001f5bd2c764.sparsebundle mounted at: /Volumes/Backup of MBA
Oct 28 11:23:20 MBA /System/Library/CoreServices/backupd[8729]: Backing up to: /Volumes/Backup of MBA/Backups.backupdb
Oct 28 11:23:21 MBA /System/Library/CoreServices/backupd[8729]: Error: (-50) Creating directory 2008-10-28-112321.inProgress
Oct 28 11:23:21 MBA /System/Library/CoreServices/backupd[8729]: Failed to make snapshot container.
Oct 28 11:23:26 MBA /System/Library/CoreServices/backupd[8729]: Backup failed with error: 2
Oct 28 11:23:26 MBA /System/Library/CoreServices/backupd[8729]: Attempt to eject diskimage failed with status: -47, dissenting pid: 0
Oct 28 11:24:05 MBA /System/Library/CoreServices/backupd[8729]: Stopping backupd to allow ejection of backup destination disk!
Oct 28 11:24:11 MBA /System/Library/CoreServices/backupd[8747]: Backup requested by user
Oct 28 11:24:11 MBA /System/Library/CoreServices/backupd[8747]: Starting standard backup
Oct 28 11:24:11 MBA /System/Library/CoreServices/backupd[8747]: Network volume mounted at: /Volumes/MPTC-1
Oct 28 11:24:12 MBA /System/Library/CoreServices/backupd[8747]: Disk image /Volumes/MPTC-1/MBA_001f5bd2c764.sparsebundle mounted at: /Volumes/Backup of MBA
Oct 28 11:24:12 MBA /System/Library/CoreServices/backupd[8747]: Backing up to: /Volumes/Backup of MBA/Backups.backupdb
Oct 28 11:24:12 MBA /System/Library/CoreServices/backupd[8747]: Error: (-50) Creating directory 2008-10-28-112412.inProgress
Oct 28 11:24:12 MBA /System/Library/CoreServices/backupd[8747]: Failed to make snapshot container.
Oct 28 11:24:17 MBA /System/Library/CoreServices/backupd[8747]: Backup failed with error: 2
Oct 28 11:24:17 MBA /System/Library/CoreServices/backupd[8747]: Attempt to eject diskimage failed with status: -47, dissenting pid: 0

I am having problems with Time Machine and having enough space to finish my last back up.

I am having problems with Time Machine and having enough space to finish my last back up.

Take a look at this link, http://support.apple.com/kb/HT1427

Interesting problem with Time Machine and Spotlight

As I was searching for spotlight problems in time machine, I came across many discussions about the indexing and whether or not to include your external Time Machine back up drive. My drive has always been indexed and one day when I plugged it in, it ran a quick index which hadn't happened before. I put it in the Spotlight Privacy Tab in Preferences not really knowing what I was doing, and after that whenever I opened Time Machine I couldn't search for files on my external HD - it just wouldn't find them even though I could navigate backward without using spotlight and find the specific files myself.
Thinking all I needed to do was take my Time Machine drive out of the privacy tab, I did so but am still encountering the same problem. Although - it seems to be a little bit better. Say I have a file on my desktop labeled "First Draft" - I backup TM, delete the file from my main comp, then back up TM again to simulate a lost file over time. I search in spotlight "First Draft" click the back arrow and am easily taken to my missing file - exactly how TM should work.
However, I have a folder named "First Draft" that I backed up a while ago, deleted, and now replaced with a new folder with the same name but with different files in them, then Time Machine can only seem to find my current folder. I search "First Draft" in spotlight in TM and then click back, but it can't seem to find it - it just goes back to the first backup date with a blank window. I know it's there because when I take off the search words and navigate through a certain day, I can see the files. Does anyone else have this problem? It's such a detailed problem - sorry it took a long time to explain. I hope you understand my problem. Thanks for your time!

Nevermind - what's even stranger is that right after I posted this - it fixed itself. Wow I hate when that happens...

External Hard disk has space problem for Time Machine

Im not sure this is the right place to post this, but I've just got OSX.5 so Time Machine is new to me. I've got a 500Gb Firewire Lacie Drive which I now have, as far as I can see, about 110GB of stuff in. I have a bout 300Gb to back up. Currently my mac can only see 260GB free, which means theres about 150GB that isnt explained. I have run Disk Inventory, which shows the dot files on the drive. There seem to be hardly any. Is there anything else that could be taking up such a large amount of disk space? Theres one movie file of 28GB that I cannot move off the drive.

Tim Whelan2 wrote:
Im not sure this is the right place to post this, but I've just got OSX.5 so Time Machine is new to me. I've got a 500Gb Firewire Lacie Drive which I now have, as far as I can see, about 110GB of stuff in.
Let's see what Disk Utility (in your Applications/Utilities folder) says. When it starts, click the top line for your drive in the sidebar (should have size and make), then the Partition tab. Towards the bottom is a *Total Capacity* line, followed by two different numbers: one in GB, the other in bytes. The first will be about 465 GB, the second roughly 500 billion. This is the different way of counting: decimal vs. binary.
There's also a *Partition Map Scheme* line. This should be followed by GUID or +Apple Partition Map.+ If your drive isn't one of those, you're going to have a problem using it with Time Machine. Report back what this says.
In the center part of the display is a diagram showing all the partitions currently on the disk. Each is represented by a box, with a name in the center, and the amount used represented by light blue shading.
If there's only one partition, it's total size and amount available will be in the center, shown in GB.
If there are 2 or more, click each one in turn to see it's sizes. The Total of the sizes should be almost the same as the total at the bottom (the Partition Map takes a bit of space).
It sounds like you may have 2 partitions, one for TM backups, one for your "other stuff". If so, each partition is treated separately for most purposes: there should be two icons on your desktop and/or Finder sidebar, for example.
Report back what you find, and whether it makes sense to you or not. Then we can figure out what's going on and what you need to do.
But note this: This drive is a bit small to use with Time Machine. TM works best if it has 2-3 times the space of what it's backing-up, so it can keep a few months of your backups. See item #1 of the Frequently Asked Questions post at the top of this forum.
Even if you could use the entire 465 GB or so, that's less than twice the 300 gb you want to back up. That would work, for a while, but depending on how you use your Mac, TM may not be able to keep your backups for very long.

Problems with Time Machine backup for two machines to one external drive

I have a brand new WD 500GB USB My Book external drive plugged into my Intel Mac Mini running 10.5.1 to use as a TM backup drive (TM reformatted it to HFS+ journaled). The Mini's connected by ethernet to the Airport Extreme. It works great. I setup my wife's MacBook Pro 17" Dual Core 2 w. 10.5.1 for TM using the Mac Mini's TM backup drive and it works fine (a little slower at 811.n wi-fi speeds, but OK). I have the Mac Mini setup in Energy Saver to shut down at night and restart in the morning. The morning after I setup my wife's MacBook Pro for TM I found a big black & white message (in half a dozen languages) on the Mac Mini saying start up failed and I need to reboot using the power button. I did and everything was cool. Now comes the problem, it's done it three days in a row so it looks like there is a problem with the TM setup. It didn't do this before I setup my wife's computer for TM.
Any thoughts on what is causing this? We've had minimal problems with Leopard setup (short of a brief hunt for an Airport Extreme Drive and a couple of network printers during initial setup).

1 mistake @ a time wrote:
I works fine over a network if the TM drive is attached to another Mac running Leopard. It won't work with an Airport drive (Apple deep sixed that feature in the final release).
We have an Airport Extreme base station, and we plan to add an Airport Express to boost the power to reach the second floor. We are ordering 4 iMacs, 20", plus I have the Macbook 13" that I have had for a few months.
We thought we could connect one large external drive via firewire cable to one of the iMacs and use it to back up all five computers via Time Machine.
Is that possible, or does everybody need their own external drive?
Thanks!
susan

Problem with Time Machine back up

Hello all,
Grateful for anyone's help with this issue.
Firstly, a summary of specs:
Mac OS X 10.7.
Late 2007 Macbook 13inch
External hard drive - LaCie 1TB D2 Quaddra
Issue - When trying to back up my 2007 Macbook it fails! When I back up my 2011 MacBook Pro (to the same external hard disk) it works fine!
I have reviewed a whole load of advice on here, some I am able to understand others that I unable too! Sorry! Now stuck so thought I would post on here in the hope sometime might be able to give me some advice.
I have downloaded a widget which helped me view the error message details (found that advice on the excellent Pondini website).
The error message was:
Starting standard backup
Backing up to: /Volumes/Mike/Backups.backupdb
Backup content size: 136.3 GB excluded items size: 8.2 GB for volume Macintosh HD
153.65 GB required (including padding), 465.32 GB available
Waiting for index to be ready (101)
Stopping backup.
Error: (-47) SrcErr:NO Copying /Applications/Address Book.app/Contents/MacOS/Address Book to /Volumes/Mike/Backups.backupdb/Mike surname removed’s MacBook/2012-12-26-120325.inProgress/560DC4C6-DFCE-48AA-B430-457C461AEA0F/Macin tosh HD/Applications/Address Book.app/Contents/MacOS
Copied 9 files (774 KB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11
To be honest this is pretty much gooblygook to me! But I did try to locate the file that was causing the problem (Address Book) and excluded it from the Time Machine backup, I then received this error message:
Starting standard backup
Backing up to: /Volumes/Mike/Backups.backupdb
Backup content size: 136.3 GB excluded items size: 8.3 GB for volume Macintosh HD
153.62 GB required (including padding), 465.32 GB available
Waiting for index to be ready (101)
Stopping backup.
Error: (-47) SrcErr:NO Copying /Applications/adidas miCoach Manager.app/Contents/Frameworks/QtCore.framework/Versions/4/QtCore to /Volumes/Mike/Backups.backupdb/Mike surname removed’s MacBook/2012-12-26-120325.inProgress/65EE1FE8-D548-4CAD-AEC7-9B6A4C12FAD9/Macin tosh HD/Applications/adidas miCoach Manager.app/Contents/Frameworks/QtCore.framework/Versions/4
Copied 12 files (2.7 MB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11
So I then excluded miCoach, but it failed again! This time with this message:
Starting standard backup
Backing up to: /Volumes/Mike/Backups.backupdb
Backup content size: 136.3 GB excluded items size: 8.3 GB for volume Macintosh HD
153.59 GB required (including padding), 465.32 GB available
Waiting for index to be ready (101)
Stopping backup.
Error: (-47) SrcErr:NO Copying /Applications/Adobe Flash Player 9/Install Flash Player 9 UB.app/Contents/InstallerData/Installer.data to /Volumes/Mike/Backups.backupdb/Mike surname removed’s MacBook/2012-12-26-120325.inProgress/B7A9D12A-B391-4AD7-907D-01828917DF39/Macin tosh HD/Applications/Adobe Flash Player 9/Install Flash Player 9 UB.app/Contents/InstallerData
So I excluded Adobe Flash Player, and....failed again, this time blaming the Calculator
Starting standard backup
Backing up to: /Volumes/Mike/Backups.backupdb
Backup content size: 136.3 GB excluded items size: 8.3 GB for volume Macintosh HD
153.59 GB required (including padding), 465.32 GB available
Waiting for index to be ready (100)
Stopping backup.
Error: (-47) SrcErr:NO Copying /Applications/Calculator.app/Contents/Resources/Calculator.icns to /Volumes/Mike/Backups.backupdb/Mike surname removed’s MacBook/2012-12-26-120325.inProgress/60CC7EAA-FCE7-4FC3-B946-8B999E574797/Macin tosh HD/Applications/Calculator.app/Contents/Resources
Copied 2760 files (27.1 MB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11
The way this is going I will not have any information left to back up!!
Any advice warmly received.
Merry Christmas

miketangokilo wrote:
Error: (-47) SrcErr:NO Copying /Library/Application Support/GarageBand/Instrument Library/Sampler/Sampler Files/Steel String Acoustic Guitar/50B-1GA1-B2.aif to /Volumes/Mike/Backups.backupdb/Mike Surname removed’s MacBook/2012-12-26-120325.inProgress/8614198B-1C54-4CF1-8C24-DDD9692FB82C/Macin tosh HD/Library/Application Support/GarageBand/Instrument Library/Sampler/Sampler Files/Steel String Acoustic Guitar
We don't know exactly what error (-47) means. Apple used to publish lists of error code, many years ago, before OSX, but very few now. It's clearly something to do with the file named, but just what isn't clear.
But we do know that SrcErr:NO means the error is not on the "source" -- ie, your Mac. It seems to be a problem writing the file to the TM drive.
So first, if you haven't yet, run Repair Disk on that TM partition, just to be sure it's ok.
Also, be sure the disk has either the GUID (preferred) or APM partition map scheme. Click the top line in Disk Utility's sidebar, and that will be shown at the lower right. If it's MBR (Master Boot Record), that's a Windows setup, and sometimes doesn't work well with Time Machine, especially if there are multiple partitions.
Prior to OSX, error -47 meant the file was busy. If that's still true, something may be trying to access it while it's being written. If you're running any anti-virus apps on that Mac, or anything else that might be looking at the backup drive, exclude the TM drive from it, or, better, turn it off. Antivirus apps can interfere with TM backups -- some can even damage them.

Problems whit Time Machine in OSX 10.8.2.

Similar Messages

Maybe you are looking for