Problems wiht b/b connection

taken from my router log file and pasted below this sort of thing happens several times a day and every time i loose connection it reports that its waiting for the line to become free, i take it that just like the last time this happened it measn the line card in the exchange i'm connected to has too many customers for the avilable ports, this in turn is locking my line profile down from 7.5 meg (which it maintained for most of the last 2 years) to below 4meg and due to the constant stream of problems which are either cabinet or exchange based (i tried the quiet line test and theres nothing there) i've had my internal wireing tested and still am having all thease problems which i dont understand, the only thing connected to the test socket is the adsl filter which is in turn connected ot the phone and the router, i tried useing 2 different routers with the same results last time this happened, and now i'm stuck wiht a broken connection which the call center in india are worse than useless at sorting out (i tried them 3 times in the last week, there "best solution" was " unplug your routerfor 20 minutes and then swithc it back on" it achieved the square root of sweet FA and its the answer they came up with all 3 times like its a new script option there trying out.
Sep 26 08:23:37 syslog -- MARK --
Sep 26 09:23:37 syslog -- MARK --
Sep 26 09:43:57 user kernel: Line 0: ADSL link down
Sep 26 09:43:57 user syslog: tc qdisc del dev ppp_0_0_38_1 root 2>/dev/null
Sep 26 09:43:59 user kernel: Line 0: xDSL G.994 training
Sep 26 09:44:00 daemon pppd[388]: Terminating connection due to link down.
Sep 26 09:44:08 user kernel: Line 0: ADSL G.992 started
Sep 26 09:44:12 user kernel: Line 0: ADSL G.992 channel analysis
Sep 26 09:44:19 user kernel: Line 0: ADSL link down
Sep 26 09:44:24 user kernel: Line 0: xDSL G.994 training
Sep 26 09:44:33 user kernel: Line 0: ADSL G.992 started
Sep 26 09:44:37 user kernel: Line 0: ADSL G.992 channel analysis
Sep 26 09:44:44 user kernel: Line 0: ADSL link up, Path 0, us=783, ds=3995
Sep 26 09:44:45 daemon pppd[388]: Clear IP addresses. Connection DOWN.
Sep 26 09:44:45 daemon pppd[388]: Clear IP addresses.
Sep 26 09:44:45 daemon pppd[388]: Couldn't increase MTU to 1500.
Sep 26 09:44:51 daemon pppd[388]: Connection terminated.
Sep 26 09:44:51 daemon pppd[388]: Connect time 5383.1 minutes.
Sep 26 09:44:51 daemon pppd[388]: Sent 518305249 bytes, received 803617461 bytes.
Sep 26 09:44:51 user kernel: dev_shutdown, dec ppp device refcnt, dev->refcnt=3
Sep 26 09:44:51 user kernel: unregister_netdevice: waiting for ppp_0_0_38_1 to become free. Usage count = -1
Sep 26 09:44:51 user kernel: dev->name = ppp_0_0_38_1, dev->refcnt=-1
Sep 26 09:44:51 user kernel: after reset to 0, dev->refcnt=0
Sep 26 09:44:51 daemon pppd[388]: PPP: Start to connect ...
Sep 26 09:44:53 daemon pppd[388]: Using interface ppp0_0_38_1
Sep 26 09:44:53 daemon pppd[388]: Connect: ppp_0_0_38_1 <-->
Sep 26 09:44:53 daemon pppd[388]: Couldn't increase MTU to 1500.
Sep 26 09:44:53 daemon pppd[388]: PPP LCP UP.
Sep 26 09:44:54 daemon pppd[388]: Remote message: CHAP authentication success, unit 23731
Sep 26 09:44:54 daemon pppd[388]: local IP address 109.145.231.179
Sep 26 09:44:54 daemon pppd[388]: remote IP address 217.32.147.104
Sep 26 09:44:54 daemon pppd[388]: primary DNS address 213.120.234.58
Sep 26 09:44:54 daemon pppd[388]: secondary DNS address 213.120.234.26
Sep 26 09:44:54 daemon dnsmasq[64]: using nameserver 213.120.234.26#53
Sep 26 09:44:54 daemon dnsmasq[64]: using nameserver 213.120.234.58#53
Sep 26 09:44:54 daemon pppd[388]: Received valid IP address from server. Connection UP.
Sep 26 09:44:54 user syslog: begin: interface: ppp_0_0_38_1 go to up
Sep 26 09:44:55 daemon dnsmasq[64]: using nameserver 213.120.234.26#53
Sep 26 09:44:55 daemon dnsmasq[64]: using nameserver 213.120.234.58#53
Sep 26 09:44:55 daemon UPNPD[4235]: uuidvalue=uuid:0004ed9f-54de-0004-ed9f-54de0000000
Sep 26 09:44:55 daemon UPNPD[4235]: Unable to open pidfile for writing /var/run/miniupnpd.pid: File exists
Sep 26 09:44:55 daemon UPNPD[4235]: HTTP listening on port 2800
Sep 26 09:44:56 user syslog: start Tr069
Sep 26 09:44:58 daemon user: Could not load verify locations
Sep 26 09:44:59 user syslog: end: interface: ppp_0_0_38_1 go to up
Sep 26 09:44:59 daemon user: tr69c: Unable to retrieve attributes in scratch PAD
Sep 26 09:44:59 daemon user: Stored Parameter Attribute data is corrupt or missing
Sep 26 09:47:27 user kernel: do_page_fault() #2: sending SIGSEGV to miniupnpd for invalid read access from
Sep 26 09:47:27 user kernel: 7fff8000 (epc == 0040c780, ra == 0040c7f8)
Sep 26 10:14:01 user kernel: Line 0: ADSL link down
Sep 26 10:14:01 user syslog: tc qdisc del dev ppp_0_0_38_1 root 2>/dev/null
Sep 26 10:14:03 user kernel: Line 0: xDSL G.994 training
Sep 26 10:14:03 daemon pppd[388]: Terminating connection due to link down.
Sep 26 10:14:12 user kernel: Line 0: ADSL G.992 started
Sep 26 10:14:16 user kernel: Line 0: ADSL G.992 channel analysis
Sep 26 10:14:22 user kernel: Line 0: ADSL G.992 message exchange
Sep 26 10:14:23 user kernel: Line 0: ADSL link down
Sep 26 10:14:28 user kernel: Line 0: xDSL G.994 training
Sep 26 10:14:37 user kernel: Line 0: ADSL G.992 started
Sep 26 10:14:41 user kernel: Line 0: ADSL G.992 channel analysis
Sep 26 10:14:47 user kernel: Line 0: ADSL link up, Path 0, us=775, ds=3975
Sep 26 10:14:49 daemon pppd[388]: Clear IP addresses. Connection DOWN.
Sep 26 10:14:49 daemon pppd[388]: Clear IP addresses.
Sep 26 10:14:49 daemon pppd[388]: Couldn't increase MTU to 1500.
Sep 26 10:14:55 daemon pppd[388]: Connection terminated.
Sep 26 10:14:55 daemon pppd[388]: Connect time 30.0 minutes.
Sep 26 10:14:55 daemon pppd[388]: Sent 4989135 bytes, received 6403434 bytes.
Sep 26 10:14:55 user kernel: dev_shutdown, dec ppp device refcnt, dev->refcnt=3
Sep 26 10:14:55 user kernel: unregister_netdevice: waiting for ppp_0_0_38_1 to become free. Usage count = -1
Sep 26 10:14:55 user kernel: dev->name = ppp_0_0_38_1, dev->refcnt=-1
Sep 26 10:14:55 user kernel: after reset to 0, dev->refcnt=0
Sep 26 10:14:55 daemon pppd[388]: PPP: Start to connect ...
Sep 26 10:14:57 daemon pppd[388]: Using interface ppp0_0_38_1
Sep 26 10:14:57 daemon pppd[388]: Connect: ppp_0_0_38_1 <-->
Sep 26 10:14:57 daemon pppd[388]: Couldn't increase MTU to 1500.
Sep 26 10:14:57 daemon pppd[388]: PPP LCP UP.
Sep 26 10:14:57 daemon pppd[388]: Remote message: CHAP authentication success, unit 10632
Sep 26 10:14:58 daemon pppd[388]: local IP address 31.52.3.74
Sep 26 10:14:58 daemon pppd[388]: remote IP address 217.32.147.104
Sep 26 10:14:58 daemon pppd[388]: primary DNS address 213.120.234.58
Sep 26 10:14:58 daemon pppd[388]: secondary DNS address 213.120.234.26
Sep 26 10:14:58 daemon dnsmasq[64]: using nameserver 213.120.234.26#53
Sep 26 10:14:58 daemon dnsmasq[64]: using nameserver 213.120.234.58#53
Sep 26 10:14:58 daemon pppd[388]: Received valid IP address from server. Connection UP.
Sep 26 10:14:58 user syslog: begin: interface: ppp_0_0_38_1 go to up
Sep 26 10:14:58 daemon dnsmasq[64]: using nameserver 213.120.234.26#53
Sep 26 10:14:58 daemon dnsmasq[64]: using nameserver 213.120.234.58#53
Sep 26 10:14:58 daemon UPNPD[5010]: uuidvalue=uuid:0004ed9f-54de-0004-ed9f-54de0000000
Sep 26 10:14:58 daemon UPNPD[5010]: Unable to open pidfile for writing /var/run/miniupnpd.pid: File exists
Sep 26 10:14:58 daemon UPNPD[5010]: HTTP listening on port 2800
Sep 26 10:15:00 user syslog: start Tr069
Sep 26 10:15:02 daemon user: Could not load verify locations
Sep 26 10:15:03 user syslog: end: interface: ppp_0_0_38_1 go to up
Sep 26 10:15:03 daemon user: tr69c: Unable to retrieve attributes in scratch PAD
Sep 26 10:15:03 daemon user: Stored Parameter Attribute data is corrupt or missing
Sep 26 10:17:42 user kernel: do_page_fault() #2: sending SIGSEGV to miniupnpd for invalid read access from
Sep 26 10:17:42 user kernel: 7fff8000 (epc == 0040c780, ra == 0040c7f8)
Sep 26 10:23:37 syslog -- MARK --
i'd be interested ot here what a mod has to say on the matter, as i already am pretty sure of whats causing the problem (the exchange having too many lines plugged into the card, which is exactly what happened a year ago for 2 weeks) because the exchange is fitted wiht cards that have *10 extra line slots* than there capable of connecting at the same time (because they were cheaper for bt to bulk buy and install than the ones that line matched the DSLAM's the exchange is fitted with) but hey that shouldnt be causeing me problems

and yet again and no doubt several more times during the night i will get this problem as well as a lot more again tomorrow untill bt stop putting too many lines onto the cards, or upgrade the DSLAM's so there able to cope with the line's (probably not going to happen)
Sep 26 22:23:37 syslog -- MARK --
Sep 26 22:52:59 user kernel: Line 0: ADSL link down
Sep 26 22:52:59 user syslog: tc qdisc del dev ppp_0_0_38_1 root 2>/dev/null
Sep 26 22:53:01 daemon pppd[388]: Terminating connection due to link down.
Sep 26 22:53:01 user kernel: Line 0: xDSL G.994 training
Sep 26 22:53:09 user kernel: Line 0: ADSL G.992 started
Sep 26 22:53:14 user kernel: Line 0: ADSL G.992 channel analysis
Sep 26 22:53:20 user kernel: Line 0: ADSL G.992 message exchange
Sep 26 22:53:21 user kernel: Line 0: ADSL link down
Sep 26 22:53:24 user syslog: web: 192.168.1.101 login
Sep 26 22:53:26 user kernel: Line 0: xDSL G.994 training
Sep 26 22:53:35 user kernel: Line 0: ADSL G.992 started
Sep 26 22:53:39 user kernel: Line 0: ADSL G.992 channel analysis
Sep 26 22:53:46 user kernel: Line 0: ADSL link up, Path 0, us=799, ds=3915
Sep 26 22:53:48 daemon pppd[388]: Clear IP addresses. Connection DOWN.
Sep 26 22:53:48 daemon pppd[388]: Clear IP addresses.
Sep 26 22:53:48 daemon pppd[388]: Couldn't increase MTU to 1500.
Sep 26 22:53:54 daemon pppd[388]: Connection terminated.
Sep 26 22:53:54 daemon pppd[388]: Connect time 758.9 minutes.
Sep 26 22:53:54 daemon pppd[388]: Sent 91666850 bytes, received 262633189 bytes.
Sep 26 22:53:54 user kernel: dev_shutdown, dec ppp device refcnt, dev->refcnt=3
Sep 26 22:53:54 user kernel: unregister_netdevice: waiting for ppp_0_0_38_1 to become free. Usage count = -1
Sep 26 22:53:54 user kernel: dev->name = ppp_0_0_38_1, dev->refcnt=-1
Sep 26 22:53:54 user kernel: after reset to 0, dev->refcnt=0
Sep 26 22:53:54 daemon pppd[388]: PPP: Start to connect ...
Sep 26 22:53:56 daemon pppd[388]: Using interface ppp0_0_38_1
Sep 26 22:53:56 daemon pppd[388]: Connect: ppp_0_0_38_1 <-->
Sep 26 22:53:56 daemon pppd[388]: Couldn't increase MTU to 1500.
Sep 26 22:53:56 daemon pppd[388]: PPP LCP UP.
Sep 26 22:53:57 daemon pppd[388]: Remote message: CHAP authentication success, unit 12405
Sep 26 22:53:57 daemon pppd[388]: local IP address 86.169.113.140
Sep 26 22:53:57 daemon pppd[388]: remote IP address 217.32.147.104
Sep 26 22:53:57 daemon pppd[388]: primary DNS address 213.120.234.58
Sep 26 22:53:57 daemon pppd[388]: secondary DNS address 213.120.234.26
Sep 26 22:53:57 daemon dnsmasq[64]: using nameserver 213.120.234.26#53
Sep 26 22:53:57 daemon dnsmasq[64]: using nameserver 213.120.234.58#53
Sep 26 22:53:57 daemon pppd[388]: Received valid IP address from server. Connection UP.
Sep 26 22:53:57 user syslog: begin: interface: ppp_0_0_38_1 go to up
Sep 26 22:53:57 daemon dnsmasq[64]: using nameserver 213.120.234.26#53
Sep 26 22:53:57 daemon dnsmasq[64]: using nameserver 213.120.234.58#53
Sep 26 22:53:57 daemon UPNPD[5787]: uuidvalue=uuid:0004ed9f-54de-0004-ed9f-54de0000000
Sep 26 22:53:57 daemon UPNPD[5787]: Unable to open pidfile for writing /var/run/miniupnpd.pid: File exists
Sep 26 22:53:57 daemon UPNPD[5787]: HTTP listening on port 2800
Sep 26 22:53:59 user syslog: start Tr069
Sep 26 22:54:01 daemon user: Could not load verify locations
Sep 26 22:54:02 user syslog: end: interface: ppp_0_0_38_1 go to up
Sep 26 22:54:02 daemon user: tr69c: Unable to retrieve attributes in scratch PAD
Sep 26 22:54:02 daemon user: Stored Parameter Attribute data is corrupt or missing
Sep 26 22:54:56 user kernel: do_page_fault() #2: sending SIGSEGV to miniupnpd for invalid read access from
Sep 26 22:54:56 user kernel: 7fff8000 (epc == 0040c780, ra == 0040c7f8)
of course i just love the fact this problem is making my internet slower and slower, i cant even use it when my kids are doing homework, becuse the contention ratios are so bad locally at those "peak periods" guess i'm just lucky heh

Similar Messages

Problems with n97 apps connecting to network (Voda...

Problems with n97 apps connecting to network (Vodafone UK – 3G)
Recently a number of my apps which used to connect automatically to the internet (which ever was available – known wi-fi or 3g) have stopped doing this. They now only connect to one known wi-fi.
I’ve tried uninstalling and reinstalling each app, but this hasn’t solved the problem. I’ve checked for software updates and do not believe any have been applied or are available. All apps have been downloaded via Ovi on the phone. I still am able to access the internet by the web browser which was installed on the phone and via google maps (which also still manages GPS position, search, etc).
The apps which I notice causing a problem are:
Sainsbury’s/nectar
Tesco
Map my tracks
Snaptu
Opera Mini
Any one got any ideas???

I have the same problem since i updated my mac to 10.5.6.
Each time I have to do a diagnostic and retype the WEP password to have the internet connection.

Problem with transacted JMS connection factory and transaction timeouts

          We encountered an interesting problem using transacted JMS connection factories.
          An EJB starts a container managed transaction and tries to validate a credit card
          before creating some information to a database for the user, in case of success
          an SMS is sent to the user via the transacted JMS queue. If the credit card authentications
          duration is about the same as the transactions timeout (in this case the default
          30 seconds) sometimes the database inserts is committed but the JMS insert is
          rollbacked. How can this be?
          If the authorization duration is much longer than 30 seconds everything works
          fine (both database and JMS inserts rollbacked), the same is true if a rollback
          is insured by calling EJBContext.setRollbackOnly(). The problem thus occurs only
          if the duration is approximately the same as the transaction timeout, it appears
          that the database insert is not timeouted but the JMS insert is. How can this
          be if they are both participating in the same transaction.
          The JMSConnectionFactory used is a Connection factory with XA-enabled. The result
          is the same also with the default "javax.jms.QueueConnectionFactory" and if we
          configure our own factory with user transactions enabled.
          Any help appreciated!


Tomas Granö wrote:
          > We encountered an interesting problem using transacted JMS connection factories.
          > An EJB starts a container managed transaction and tries to validate a credit card
          > before creating some information to a database for the user, in case of success
          > an SMS is sent to the user via the transacted JMS queue. If the credit card authentications
          > duration is about the same as the transactions timeout (in this case the default
          > 30 seconds) sometimes the database inserts is committed but the JMS insert is
          > rollbacked. How can this be?
          It should not be.
          >
          > If the authorization duration is much longer than 30 seconds everything works
          > fine (both database and JMS inserts rollbacked), the same is true if a rollback
          > is insured by calling EJBContext.setRollbackOnly(). The problem thus occurs only
          > if the duration is approximately the same as the transaction timeout, it appears
          > that the database insert is not timeouted but the JMS insert is. How can this
          > be if they are both participating in the same transaction.
          >
          > The JMSConnectionFactory used is a Connection factory with XA-enabled. The result
          > is the same also with the default "javax.jms.QueueConnectionFactory" and if we
          > configure our own factory with user transactions enabled.
          >
          > Any help appreciated!
          Make sure that your session is not "transacted". In other words,
          the first parameter to createSession() must be false. There is an
          unfortunate name re-use here. If a session is "transacted", it
          maintains an independent "inner transaction" independent of the
          outer transaction. From the above description, it seems unlikely
          that your application has this wrong, as you say that
          "setRollbackOnly" works - but please check anyway.
          Make sure that you are using a true XA capable driver and database
          (XA "emulation" may not suffice)
          Beyond the above, I do not see what can be going wrong. You
          may want to try posting to the transactions and jdbc newsgroups. Note
          that JMS is appears to be exhibiting the correct behavior, but the
          JDBC operation is not. The JDBC operation appears to have
          its timeout independent of the transaction monitor's timeout.
          Tom

Does it create a problem if I only connect the backup external drive every few days for use with Time Machine? Should I have purchased Time Capsule instead?

After a near miss with my 4-year old MacBook, I finally wised up and purchased a WD My Passport for Mac to back up my hard drive. I connected the Passport today and have performed the first full backup. However, I do not wish to keep it permanently connected to the laptop. Does this create a problem if I only connect the drive every few days? Should I have purchased Time Capsule instead?

Hello,
I don't think it'll cause a problem, but I'd disable/turn off Time Machine before disconnecting, then turn it back on after you connect it again.

I am having problems with the wifi connection on my ipad 4th generation only 3 weeks old. Have left it back to the shop i bought it in and they said they have to send it away now i am left with no ipad. What after sales support do you give really?

Does anyone else have problems with the wifi connection on their 4th generation Mine keeps going off line and its only 3 weeks old.I had the ipad mini and this problem never existed. I brought it back to the shop where i bought it Expert Laois last week and they said they couldnt find a problem but had to take it back today as it keeps disconneting from wifi still, anyway they are sending it back for repair and it am left with no ipad. After spending in excess of 700e i feel that this is really bad after sales service. I bought something that i want to use now and cant so what a waste of money it is .

Thankyou, but the shop said that they spoken to apple and that they have now changed their policy and that they do not give a replacement. So are you telling me that their information is false. Also what should they have done. This problem has existed since i bought it.????? What should i do?????

Trying to connect my replacement Iphone 3GS to my windows 7 laptop but it is not recognised at all, my ipod can connect no problem, my iphone can connect to my windows vista computer no problem. Any ideas?

Trying to connect my replacement Iphone 3GS to my windows 7 laptop but it is not recognised at all, my ipod can connect no problem, my iphone can connect to my windows vista computer no problem. Any ideas?

More info,
I have bootcamp with Windows 7 installed, do I need to run some "Driver compatibility checker" after the Windows 7install?
if so what is the name of it?
thanks

I am still having problems with wi fi connectivity after I upgraded my computer to os x 10.9.4.

I updated my laptop to 10.9.4, and now my laptop won't continually stay connected to the internet. I will get it to open a page initially, then when I try another page, the browser acts like it's going to load a page, but then just hangs there. When it does connect, it is fast, but more often then not as I'm trying to connect to different websites the page doesn't load at all. I've restarted the router, I've restarted the modem, I've deleted and re-added my network, I've restarted my computer, and I tried to restart in 'safe-mode'.
I had the same problem after the last update, but figured it was the same issue everyone else was having of the computer not reconnecting after sleep. I found a fix, and it seemed to help (although the problem never completely went away), but I can no longer find that solution.
My internet provider stated that all was good on their end, and indeed, I have no problems using wi-fi on my iphone. But, my computer just doesn't want to stay connected enough to surf various sites on the internet.
HELP!!

Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About
Also try turning off Bluetooth

Both xp and windows 7 have video problems with my VGA connection using TV

both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Language problem with my jdbc connection

Hello,
i'm having a problem with my jdbc connection.
the problem is that i'm connecting to MS- Access db the have arabic tables, and columns, it was working fine on a windows XP environment prepared for arabic language, but when i had to move to windows vista it did not work and it gave me an exception.
i'm using netbeans 6.1 IDE, and the exception is
java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver]COUNT field incorrect
at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(JdbcOdbc.java:3110)
at sun.jdbc.odbc.JdbcOdbcStatement.execute(JdbcOdbcStatement.java:338)
when i printed the select statement and the exception it gave me:
SELECT [??? ???????], [??? ??????], [??? ?????], [??? ?????], [????? ???????????] FROM EDU_DIVISION; [Microsoft][ODBC Microsoft Access Driver]COUNT field incorrect.
the question marks are very weird to appear!!!!!!
here is the code:
public void edu_branch() {
        sucpy = 0;
        eflag = 0;
        asql = "SELECT [\u0643\u0648\u062F \u0627\u0644\u062C\u0627\u0645\u0639\u0629], [\u0643\u0648\u062F \u0627\u0644\u0643\u0644\u064A\u0629], [\u0643\u0648\u062F \u0627\u0644\u0642\u0633\u0645], [\u0643\u0648\u062F \u0627\u0644\u0634\u0639\u0628\u0629], [\u0627\u0633\u0645 \u0627\u0644\u0634\u0639\u0628\u0629], [\u0627\u0633\u0645 \u0627\u0644\u0634\u0639\u0628\u0629 \u0628\u0627\u0644\u0627\u0646\u062C\u0644\u064A\u0632\u064A\u0629], [\u0627\u0644\u0643\u0648\u062F \u0627\u0644\u0645\u062E\u062A\u0635\u0631] FROM EDU_BRANCH;";
        Connection connection;
        Statement statement;
        try {
            Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
            connection = DriverManager.getConnection("jdbc:odbc:info");
            System.out.println("Connection to Access file is created...");
            statement = connection.createStatement();
            statement.execute(asql);
            System.out.println("Executing query : " + asql);
            aset = statement.getResultSet();
            if (aset != null) {
//------------------------------Oracle operations--------------------------------------------------------------------
                while (aset.next()) {
    can you help me please

arabic language
SELECT [??? ???????], [??? ??????], [??? ?????], [??? ?????], [????? ???????????] FROM EDU_DIVISION; >[Microsoft][ODBC Microsoft Access Driver]COUNT field incorrect.
the question marks are very weird to appear!!!!!!It failed to understand your unicode sql.
it was working fine on a windows XP environment prepared for arabic language, but when i had to move to windows vista it did not workStrange. Maybe you need to compare the differences of some system properties on both hosts, for instance, sun.io.unicode.encoding, file.encoding, user.region, and so on.

Has Apple fixed the problem with 4G cellular connection?

Has Apple fixed the problem with 4G cellular connection on the iPad 3?

Cellular connection problem was for US connection in Houston, Texas. Have an iPad 2 which functions perfectely on Wi-Fi or 3G. Bought an iPad 3 strictly to get the increased speed from the 4G LTE connection. Purchased on with the AT &T cellular. Wi-Fi functions fine, but 4G LTE connection is terrible when it connects at all. Went to AT&T and they said no problems with service in my area, but never get over 2 bars and most times, Web pages load very slow or will hang and not load at all. Went to the Apple store and they said it was AT&T network problem and went to AT&T and they said no problems with their service. Went to the Apple communities forum here and discovered that many people were having the same problems with the 4G LTE cellular connection on their iPad 3's. Didn't seem to matter if it was AT&T or Verizon. So I decided that I would just return the unit and wait for Apple to fix the problem. Hence my question.
Appreciate very much your time in responding to my question.

I am having trouble with the initial connection. I have isolated the problem to the cable/ connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

I am having trouble with the initial connection of the apple tv. I have isolated the problem to the cable/connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

There are only two types of HDMI cables (standard and high speed - listen to all 1.2, 1.3 etc etc nonsense they will try to tell in the store) both types will work with the Apple TV.
The cable may be faulty though, have you got another to try, what exactly is happening.

Problem while creating JCA connection to MDM server

Hi All,
I have restarted my mdm connector(com.sap.mdm.tech.connector) along with the applications related to Enrichment Controller. All applications restarted successfully. After that I tried accessing the URL
http://MDMSERVER:50000/MDM_EnrichmentController/WorkflowPolling?process=Monitor
but I am getting following exception in this page
Polling Repository
    name=Vijaybabu_Repo_on_MDMSERVER, status=No repository connection, error description=com.sap.mdm.net.ConnectionException: Problem while creating JCA connection to MDM server MDMSERVER
        Enrichment Request Threads
Could somebody help me pointing if something I have missed..
Thanks and Regards,
Manoj

hi Swarna,
I have verified the repository and found 0 fatal errors, 0 non-fatal erros and 0 warnings. I also checked the MDM Factory and Connector service is running fine.
The detailed exception is
Sep 2, 2008 12:49:40 PM com.sap.mdm.logging.MdmLogger error
SEVERE: Problem while creating JCA connection to MDM server 'KOLAPON'
com.sap.mdm.net.ConnectionException: Can not resolve JCA connection
     at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnection(JcaConnectionUtil.java:119)
     at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnectionAccessor(JcaConnectionUtil.java:62)
     at com.sap.mdm.internal.session.JcaConnectionAccessor.reserveConnection(JcaConnectionAccessor.java:70)
     at com.sap.mdm.internal.session.JcaConnectionAccessor.reserveConnection(JcaConnectionAccessor.java:59)
     at com.sap.mdm.repository.commands.GetRepositoryStatusCommand.execute(GetRepositoryStatusCommand.java:67)
     at com.sap.mdm.enrichment.common.ECAdminUtils.getRepositoryStatus(ECAdminUtils.java:125)
     at com.sap.mdm.enrichment.common.EnrichmentUtils.validateRepostiryConfiguration(EnrichmentUtils.java:889)
     at com.sap.mdm.enrichment.common.EnrichmentUtils.getCatalogManager(EnrichmentUtils.java:144)
     at com.sap.mdm.enrichment.workflowpolling.PollingThread.getCatalogManager(PollingThread.java:166)
     at com.sap.mdm.enrichment.workflowpolling.PollingThread.run(PollingThread.java:102)
Caused by: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: "ConnectionManager" is closed. Possible reasons: 1) connector "MDM Factory" is stopped or not started, 2) Connector service is stopped or has not been started.
     at com.sap.mdm.connector.connection.MdmConnectionFactory.getConnectionEx(MdmConnectionFactory.java:223)
     at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnection(JcaConnectionUtil.java:108)
     ... 9 more
Caused by: com.sap.engine.services.connector.exceptions.BaseResourceException: "ConnectionManager" is closed. Possible reasons: 1) connector "MDM Factory" is stopped or not started, 2) Connector service is stopped or has not been started.
     at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:122)
     at com.sap.mdm.connector.connection.MdmConnectionFactory.getConnectionEx(MdmConnectionFactory.java:213)
     ... 10 more
Regards,
Manoj
Edited by: Manoj Kumar Nanda on Sep 2, 2008 9:21 AM

Is there any problem about 10I oracle connect to 9I oracle in BW

we want to know about
creating a new source system on BW in AIX pointing to an Oracle
database, bw oracle use 10i database , connect to
9idatabase(Windows) to get data for BW,
can you tell me how 10I oracle connect to 9I oracle ??
is there any problem about 10I oracle connect to 9I oracle ??If
there exit problem ,how to deal with it ??
Thank you
ALLEN ZHOU

Hi
You may face some problem in BASIS side especially if one version is Open SQL and other in Old SQL
Regards
N Ganesh

I m updated my phone but some problems occured, so i connect it to itunes and it said "your iphone is detected in recovery mode" so i tried restore it but was unsuccessful and it shows different unknown errors such as 14, 2009,1611. Please help

i m updated my phone but some problems occured, so i connect it to itunes and it said "your iphone is detected in recovery mode" so i tried restore it but was unsuccessful and it shows different unknown errors such as 14, 2009,1611. Please help

Hello Mubashir surf google and try pressing power and home button at the same time untill apple sign shows up and then leave it .
Otherwise surf google you mite have to edit you host file in windows , system32
Let me know if it works

Problems wiht b/b connection

Similar Messages

Maybe you are looking for