Problems wit the portal in ias release 2

Hi.
My NEW ias release2 installation seems to be working fine but I can't make my portal work. I can log into Login Server, but when I click on my portal link I get a WWC-00000 error. My httpd.conf file has my machine name in lower case, so there shouldn't be any problem there.
The strange thing is:
SQL> select count(*) from WWSEC_ENABLER_CONFIG_INFO$;
COUNT(*)
0
Can this have anything to do with it? How can I solve this???????
Thanx a lot, Mere.

Hi,
I am assuming that you have installed 9iAS v2 (from information give by you). To solve this problem, you need to
run opca ( you can find it in $ORACLE_HOME/portal/plsql/admin directory). Run the opca in SSOPARTNERCONFIG
mode. You might need to run it in MIDTIER mode also if the problem doesn't go away.
To see the examples to run opca in different modes, execute opca without any parameters.
Hope it helps.
Ved

Similar Messages

How to remove 1797 emails. stuck in inbox. but not showing anymore - and i have the same problem wit the sent. please help

how to remove 1797 emails. stuck in inbox. but not showing anymore - and i have the same problem wit the sent. please help

This is a user supported frum, so making threats really doesn't help, besides which it's not like any of us can really make a dent in Toshiba's bottom line despite how many people we think we can influence. Unless those people were standing in line to buy a Toshiba product cash in hand, and you pulled them out, it really doesn't add up for them.
At this point it would probably be better for you to use the 800 number. Have all your e-mails ready to forward, if needed, to whoever you end up talking to. Don;t let them off the hook. An hour on the phone is much better than weeks passing e-mails through a support site. Also contest the charge with your bank or credit card.

Translation problem in the portal screen

Hi Experts,
We are facing problem in the portal screen where some texts are displaying in-correct languages.
Basically all the text should come in Chinese if we login in Chinese language, but it is coming in English
For e.g. In Follow on Documents screen u2013 Value (filed label) is coming in English instead of Chinese,
Similarly some Chinese text is wrongly translated.
Help us how to do the translation or should we need to apply any OSS notes for this?
Should we need to use translation SOTR_EDIT to do the translation?if then how to do it?
Regards
Paul

Hi,
What is the SRM version ? Please also check the language setting in your browser.
For wrong translation, you can correct it in the translation tools like SE63.
Regards,
Masa

Display problem in the portal: Interesting!

Hi,
I am facing an interesting problem in my portal.
In the content area, when an iview is getting displayed, sometimes I dont find the blue background and proper arrangements of the tabs present in the iview.It becomes plane white and the texts and tabs that are to appear in the content area are seen in a random fashion.
This problem it doesnt occur always. Sometimes it works fine and sometimes it gives this problem. Please get me a solution.
Regards,
Pawan.

Hi,
There may be some problem in installation itself. Not sure. May be u can try updating the latest patch and see if the probelm gets resolved.
Regards,
Harini S

Can MDAC installation cause navigation problems within the portal?

Hello,
I have a client who having problems loading page links in our second level navigation. Evertime time she clicks on node to expand the tree of links, she gets a "loading" message. I see this all the time but this message doesn't go away. She also gets a javascript error on the page stating it cannot find the specify module. She notice the problem around the time of her MDAC file installation. Do anyone know if this can cause a problem for navigation on the portal?
Thank you,
Francis

You made this bed by over complicating your site. Simple solution, take your pages out of sub-folders. Nobody but you cares about the .html extensions. IMO, it's a very poor reason for using sub-folders.
About linking & navigation:
http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7c44a.h tml
Presently, you must be using document relative link paths. Either switch to Site Root Relative links which will likely work on your remote server but fail to test locally. Or use absolute URLs (http://). The downside with this is that DW won't be able to manage links for you.
Nancy O.

Problem into the portal content Studio

Dear Expert.
Thanks for helping me.
When i enter to the Portal Content Studio as administrator
All the options are enabled sucha as: Create JCO Destination, Maint JCO Destinations, Start assigned SLD buttons.
Thanks everyone.
Edited by: jtovar77 on Oct 14, 2011 7:07 PM

Hi jtovar77,
this forum is about SAP NetWeaver Gateway problems (which is an ABAP based solution).
I assume that one of the forums listed on the follwoing page [SAP NetWeaverPortal in SDN|http://www.sdn.sap.com/irj/sdn/nw-portalandcollaboration] is better suited for your problem.
Best Regards,
Andre

Bandwith problems within the Portal

Hi SAP Experts,
I have the following problem:
We have Portal users which go online with the modem and we have users which access the internet through a dial-up connection. I would like to have the "modem users" to work on a standard framework page and the "dial-up users" to work on a light framework page.
I would like to integrate this within the Master Rule Collection. It should sound like the following:
If the user has a high bandwith => go with the standard framwork page
If the user has a low bandwith => go with the light framework page.
Do you guys know if this is possible? If yes, how does the Portal know if the user has high- or low bandwith?
Thanks in advance and best regards
I will give u good points because I have really troubles solving that problem.
Alex

Hi,
Please check these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2fhelp%2fsdn_help_nw04s%2fsaphelp_nw04s%2fhelpdata%2fen%2fed%2ff794f201654cc8bdd6968e350800d9%2fcontent.htm
MastHead Change & Portal Desktop
Master Rule Collection
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8d9d9c90-0201-0010-e9a4-ed82031e1908
Hope it helps.
Regards,
Mona

Problems wit the bpel engine

Hi!
I have two problems concerning the bpel engine
1. After I'va successfully installed esb, I can see the bpel engine in the components section in the esb administrator console, but it is not installed.
When I try to install it manually, I get the following error:
Main Message:(FAILURE) The Component com.sun.bpelse-1.0-2 could not be installed. Instance Messages: Instance : domain1@stgn0023 Message:(FAILURE) Installation of Engine com.sun.bpelse-1.0-2 failed. The bootstrap init() method threw a java.lang.UnsupportedClassVersionError exception. The exception message is: com/sun/jbi/configuration/ConfigPersistence (Unsupported major.minor version 49.0) The bootstrap cleanUp() method threw a javax.jbi.JBIException exception. The exception message is: caught exception while creating Installatoin Configuration MBean, failed to init bpelse component
What's wrong here? What do I have to do?
2. This concerns the examples for the bpel engine: How do I build the service assembly as suggested in the description for running the sample?
Thanks for your help
Bye

What version of the JVM are you using? You need JDK 1.5 to run the BPEL engine; it sounds like you are using JDK/JRE 1.4

Problem with the portal on 64bit computer(s)

None of the replies fixed the issue but after doing more troubleshooting I am starting to narrow the issue down. I am going to start a new post with my new findings.
Hello
Wondering if this is a known issue or not. I am having troubles with windows 7 x64 machines getting a blank page when getting to the portal.
I can get to it just fine on my 32bit machine but when I login on a 64bit machine the silver light part does not load. I have tried adding the site to both trusted and/or local intranet zones with no change.
If this a known issue is there a work around?

You would need Silverlight for the 64bit browser, which I am not sure even exists. You probably have Silverlight for 32bit browser installed and working fine.
Cheers,
Anders Spælling
Senior Consultant
Blog:
Twitter: LinkedIn:
Please remember to 'Propose as answer' if you find a reply helpful

Problem Starting the Portal

Hi All,
We have installed EP7 sneak preview verson. It was running fine but today when we started it its not getting started ....
Status of J2EE server is "Some Process Running" .. in SAPMMC ...
Logviewer is giving error "Principal not found!" ...
Can anybody help regarding this ...
Regards,
Amit

Hi Umair,
Thanks a lot for your reply . We have installed it 2 weeks back.
I tried manually restarting it several times .. it didn't work .
We haven't installed anything other than EP7 on this machine.
Is there any other way ? Or do I need to reinstall it ..
Thanks & Regards,
Amit

Problem wit the speed of Adobe Media Encoder

Dear Sirs, my computer has two Xeon e5-2687w each 8 core processors. Why is Adobe Media Encoder running to only 20% CPU?
Thanks,
Jiri Stepanek

Dear Sirs, my computer has two Xeon e5-2687w each 8 core processors. Why is Adobe Media Encoder running to only 20% CPU?
Thanks,
Jiri Stepanek

Problem connect to Portal with SLD

Hi , i have problem connect the portal (7.0) whit SLD server
The SLD server is configured in the Solution Manager.
SLD: ctsi386nt02.ctsnx.com:sapgw00
the check connect SLD failure. show messages.
[Thr 4724] * ERROR       partner 'ctsi386nt02.ctsnx.com:sapgw00' not reached
[Thr 4724] *
TIME        Tue May 03 14:15:29 2011
[Thr 4724] * RELEASE     700
[Thr 4724] * COMPONENT   NI (network interface)
[Thr 4724] * VERSION     38
[Thr 4724] * RC          -10
[Thr 4724] * MODULE      nixxi.cpp
[Thr 4724] * LINE        2823
[Thr 4724] * DETAIL      NiPConnect2
[Thr 4724] * SYSTEM CALL connect
[Thr 4724] * ERRNO       10061
[Thr 4724] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 4724] * COUNTER     25
[Thr 4724] *
[Thr 4724] *****************************************************************************
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION

Hi,
User SLD - doesn't matter on name belogns to system where SLD is configured and running. SO I guess you have SLD on Solman.
In case you didn't configured SLD on portal you have to set up on portal on visual admin choose Cluster > Server >Services > SLD Data Supplier > tab Runtime > HTTP Settings and add data of your Solman's SLD hostname port and user (SLDDUSER)
In case of you have SLD also on portal, go to SLD page e.g. http://<hostname>:5<system_number>00/sld
On the SLD initial page, choose Administration and in the section Server > Data Suppliers.
add data of your Solman SLD
Check web http://help.sap.com/saphelp_nw70/helpdata/en/ee/74b3407e73c57fe10000000a1550b0/frameset.htm
Best regards,
Peter

How do I configure the portal to allow both anonymous and LDAP or Membership Logins?

I want my portal's content to be publically accessable, to allow anonymous users to browse the content without the ability to modify layouts, content, etc. <br><br> But I can't figure out how to make the portal completely skip the login menu page. If I enable any modules besides the Anonymous module, I get the login menu. If I disable all modules but anonymous, I get a login module denied error message when I post to the login servlet from one of my pages.
What do I need to do? My frustration with the lack of decent documentation of most of the features of this product is growing by the second.

When opening up the administrative console
(http://localhost:8080/console?func=frameset) and looking at the source
it shows the following:
<HTML>
<HEAD>
<TITLE>iPlanet Portal Server 3.0 Administration Console</TITLE>
</HEAD>
<FRAMESET FRAMEBORDER="no" COLS="*" ROWS="110,*" BORDER=0>
<FRAME BORDER=0 SCROLLING="no" MARGINHEIGHT=10 SRC="/admin/top.html">
     <FRAMESET COLS="250,*" BORDER=0>
     <FRAME SRC="/console?func=directNav" NAME="navigatorFrame">
     <FRAME SRC="/console?func=frameAdmin" NAME="adminFrame">
     </FRAMESET>
</FRAMESET>
</HTML>
Where are the html files located that the console servlet is including?
The problem that I am encountering is this:
I need to set the "Primary Document Directory" in the iPlanet webserver
to something other than - <ipsbase>/public_html which seems to be the
default configuration. When I switched the doc root to /foo/bar/ I
noticed no problems with the portal server until I tried to enter the
admin console. My browser reported back file not found errors for each
of the frame pages that are included in the HTML snippet above. I
understand that by changing the document root that the servlet no longer
has a context of /admin/top.html but does anyone have thoughts as to
what is going on and how to resolve this?
thanks
-matt

Problem With the Web Template in the QA when moved from DEV

Hi SAP gurus,
I am Working in BI 7.0 SP16 . Actually I had Designed and Published a web template which generates graphs in the Portal.
In WAD
In the chart options, for X-axis, for the text direction i have changed to Diagonal UP and font for the text is "Arial" and style is "bold".
when I execute the Web template in Development System all the queries , graph and font is working fyn.....but when I transported to the QA system
the problem is:
When I executed the Web template in QA , the graph is generating fyn and the queries r running fyn but the font changed to "Times New Roman " , the direction of the text is "Horizontal" and the style is "Normal"
and when i checked the chart options in QA i can see all the options are right i.e what i had given in the development system the text direction " Diagonal UP" and font for the text is "Arial" and style is "bold".
this was the frst graph that i was generated in the WAD in DEV moved to QA.......so wat could be the problem.....Is there any problem vith the configuration issue in the portal side in QA or any connection problem in the portal?
can any one help me to solve this issue?
Thanks ,
Aravind

Hi sriman,
when u want to edit the chart-> rgt click on the chart and select the edit option
-> it vill take to the other window
-> at the bottom of the chart there is a button refine.click that button.it vill take to the others options for the chart.
->click the category axis(X-axis) or to the right of the chart, u can c the chart options,go to the category axis ,expand the categoryaxis option.
-> under the category option, there vill be four options Line, Grid line,Title and Unit.
-> Select the Line option,at the bottom of that window, u can c the option for the Line.
-> go to the text properties, u can change the text wat u want.
regards,
Aravind.

How to check the code source of some function in the portal.

hi all.
i have some problem in the portal.
i use the ESS in the portal, and now some people can not check their salary.
i want to check the code source, but i do not know it uses which program.
can some one tell me the way to check the program.
best regards.

If you want to access the source code of any ESS component, you will need access to NWDI. NWDI NWDI = NetWeaver Development Infrastructure, it provide the tools and process to build new / modify existing applications built using NWDS. There are plenty of threads discussing how to set up NWDI, you may search for the same.
However if the payslip problem is only for some users, it could also be a pdf issue, have you tried running the payslip for those select users within ECC?
Thanks,
GLM

Problems wit the portal in ias release 2

Similar Messages

Maybe you are looking for