Problems with 1 way audio
So on and off maybe once or twice a year we have had one way audio issues pop up where incoming callers couldn't hear us but we could hear them. Reboot of the docsis modem for our pri service provider has always resolved this in the past. It started happening again intermittently a week ago (no config change on our part). I'm convinced my service provider has done something since nothing has changed with us but I'm having difficulties getting them to do anything. Attaching a log with a call we had issues with. Because its such an intermittent issue I cannot reliably replicate this issue. Heres a snippet. What caught my eye was the Bad protocol/sequence. What else would help to figure this out? Call number we had issue with 9406138231
047125: Aug 26 16:42:28.869: %ISDN-6-CONNECT: Interface Serial0/2/0:0 is now connected to 9406138231 N/A
047126: Aug 26 11:42:29.053: //15101/A6B0BF9186ED/DSPAPI/[0/3:1]/dsp_query_info:
Request ID=9, Reset Flag=FALSE Q:PO_Delay PO_Error TX RX Levels VQ
047127: Aug 26 11:42:29.057: //15101/A6B0BF9186ED/DSPAPI/[0/3:1]/dsp_tx_stats:
Request ID=9, Packets: Voice=1181, Signaling=0, ComfortNoise=0
TX duration=23630(ms): Voice=23630(ms), FAX=0(ms)
047128: Aug 26 11:42:29.057: //15101/A6B0BF9186ED/DSPAPI/[0/3:1]/dsp_rx_stats:
Request ID=9, Packets: Voice=879, Signalling=0, ComfortNoise=0
RX duration=23630(ms): Voice=17520(ms), FAX=0(ms)
Packets: Bad Sequence=2, Bad Protocol=3, Late=0, Early=0
047129: Aug 26 11:42:29.057: //15101/A6B0BF9186ED/DSPAPI/[0/3:1]/dsp_playout_delay_stats:
Request ID=9, Current=55(ms), MIN=55(ms), MAX=65(ms)
Clock offset=1990306130(ms), Inter arrival jitter=0(ms)
047130: Aug 26 11:42:29.057: //15101/A6B0BF9186ED/DSPAPI/[0/3:1]/dsp_playout_error_stats:
Request ID=9
Concealment: Predictive=140(ms), Interpolative=0(ms), Silence=20(ms)
Retro Memory update=2(ms), Buffer overflow=0(ms)
Talkspurt endpoint detection errors=2
047131: Aug 26 11:42:29.057: //15101/A6B0BF9186ED/DSPAPI/[0/3:1]/dsp_level_stats:
Request ID=9, TX: power=-76.3(dBm0), mean=-79.3(linear PCM), RX: power=-32.4(dBm0), mean=-23.1(linear PCM)
Background Noise=-61.9(dBm0), ERL level=45.0(dB)
ACOM level=45.0(dB), Current TX act=1, Current RX act=1
Reflector locations: 4(ms) 0(ms) 0(ms), MAX reflector=4(ms)
2 ECAN control words: 7C 1000, ECAN Version=9183.890
Hi there Leticia25,
You may find the troubleshooting steps in the article below helpful.
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
-Griff W.
Similar Messages
-
Itunes won't run because of some problem with my audio configuration? help!
it specifically says "itunes cannot run because it has detected a problem with your audio configuration". anybody know how to fix that. all i did was when my itunes was werking perfectly fine i was uploading some videos onto it but wen i did it was freezing so i did it again and it froze again so i deleted itunes and installed it again. thats when the problem happened. i tried installing quicktime again. that didn't work then i organized my music and video files but it still wouldn't work. my speakers work good. id on't know what the problem is. CAN ANYBODY HELP????!!!!
Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
Good luck.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards. -
Itunes cannot run because it detected a problem with your audio config.
I keep coming up with this message. I feel like I have tried everything. Uninstalling---reinstalling---installing earlier versions---even tried apple's help page regarding this error. Nothing seems to work. Anyone have any ideas?
I have exactly the same problem. Everytime I try to open itunes it shows the dialog "itunes has detected a problem with your audio config..." and then when it "opens"
has no background, so it's impossible to do something. I've tried to reinstall itunes and quicktime in different ways like both of them separately and following every instruction in Apple's Web site like article #304424. I've installed prior versions for those programs too and the problem persist, tried to clean up the registry, etc. I don't want to reinstall Windows to solve this issue 'cause it seems to be only way to get rid of this! =( HELP!!! -
Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?only $99, i thought it was closer to $175.
-
Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC
Hi B, thanks so much for helping me troubleshoot !!
Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
* Sound Playback Default Device = No Playback Devices.
* Sound Recording Default Device = No Playback Devices.
* MIDI Music Playback Default Device = No MIDI Playback Devices.
All text in this drop-down box were light grey, and therefore unable to be selected or altered.
I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
Thanks again,
Shell -
ITunes has detected a problem with my audio configuration...
When I downloaded the new update, iTunes 7.3, I am unable to open it or Quicktime. iTunes says it has a problem with my audio configuration, and Quicktime says "This application has requested the Runtime to terminate is an unusual way." What do I do to solve this?
The problem with your QuickTime is most likely causing the iTunes problem. (iTunes uses QuickTime for audio and video playback.)
The following troubleshooting document may be of some assistance:
iTunes 7 for Windows: iTunes has detected an audio configuration problem -
Problem with iTunes: iTunes has detected a problem with your audio...
"iTunes has detected a problem with your audio configuration. Audio/Video playback may not work properly."
Ever since I downloaded the latest version of iTunes I recieve this message every time I open iTunes and I can't play anything. I tried reinstalling but the same problem occurs. Any solutions? ThanksI have also received the same message. I tried removing itunes and quicktime. I even went as far as searching "my computer" for files and folders with these names to delete everything. No luck. Someone suggested downloading quicktime as a stand alone download. This I did, but then when I wanted to download itunes it came bundled with quicktime and overwrote the files. Is it even possible to download itunes without downloading quicktime along with it? Is an older version of itunes better? I had no problems prior to this version. Does my system need to be upgraded to be compatible? I'd rather just have the old version back. It worked! Is there a way to obtain an older version?
Presario R3000 Windows XP Pro -
Problem with Creative Audio Control Panel
) Heya, I just bought a SB X-Fi Xtreme Audio and I've encountered a problem with Creative Audio Control Panel. My OS is Win7 x64; I have installed the newest drivers for SB. The problem is that I can't set my setup for headphones. I mean I can do that and it's working untill I turn off the PC or restart the system. After that it always sets for 2/2. Speakers. Any ideas how to make this thing to remember my settings the way I want it's Thanks!
- The problem seems to be fixed Here's the solution for my card: <a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493" title="Linkification: http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493"]http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493[/url]
-
ITunes cannot run because it has detected a problem with the audio config.
I didn't make any audio changes, but since I startet up my laptop the last time there occures allways a warning pop up when I'm trying to open iTunes. The pop up contains the following message: "iTunes cannot run because it has detected a problem with your audio configuration".
And there is just the possibility to click the "close" button on the pop up.
So now uninstalled and re-installed the newest version of iTunes, but this didn't solve the problem. I allso searched through the audio settings in the control panel area. But I dind't find any false settings, or maybe I just don't know where the problem is.
Does someone know what the problem could be. Or did someone have similar problems and found a way tosolve it?
Could it be possible that another audio program such as winamp media player creates a problem for the startup of iTunes?
Thanxx a lot for any helpfull replies, cheers saltypically, that error message is caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
the following document may be of some assistance:
iTunes 7 for Windows: iTunes has detected an audio configuration problem -
Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.
I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,... -
Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
epThis forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards. -
When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(
Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy -
Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated
I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0) -
my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly" i have uninstalled it and reinstalled it twice and it stil lcomes up with that message every time I opentheiTunes icon I dont knowwhat to do
Hello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen -
ITunes Cannot Run It Has Detected a Problem With Your Audio Configuration
Well... I've just come back from christmas with my new green iPod nano (second gen), and I try to use iTunes. It has an "...unknown error (-200)." So I download the new iTunes. NOW it says "iTunes Cannot Because Run It Has Detected a Problem With Your Audio Configuration." I've tryed the support but it doesn't have any WORKING solution. If SOMEONE could PLEASE tell me whats going on, I'd be REALLY greatful.
I've been trying to figure this out for almost 3 days now and I'm hanging by a string here.
HP Pavillion Windows XP Windows Media EditionIt is your QuickTime application, actually. What you want to do is go into your Control Panel, and then Add/Remove Programs. Find QuickTime, click on it, and click on Remove, and then follow through the prompts to uninstall QuickTime.
Then, go here to reinstall it:
http://www.apple.com/quicktime/download/win.html
Make sure you choose the second option that says QuickTime for Windows (NOT the QuickTime with iTunes).
Go through the download and install, and whenever it completes, try to launch iTunes.
CG -
ITunes 7.3.1 cannot run as it has detected a problem with your audio..
Hey
I installed iTunes 7.3.1 last night, and when I click to open it, a message comes up saying 'iTunes 7.3.1 cannot run as it has detected a problem with your audio configeration'
Please help
ThanksHi,
I got this message on the older version (7.3) of iTunes and then I got an error to do with runtime as highlighted in another thread.
I used windows add/remove to uninstall iTunes and reinstalled the latest version.
You could try re-installing the latest version.
Cheers,
Cofnchtr.
Maybe you are looking for
-
I forgot the answer to one of my security questions!
I'd rather not call up Apple as I have anxiety and I hesitate while I am on the phone to anyone. I just want to know how I can reset my questions/answers.
-
How to plot an ellipse with the equation in Robert H. Bishop's book
Hi, I've been trying to plot the ellipse with the equation on Page 232, Q E7.3 of Dr. Robert H. Bishop's book. I am currently stuck as I am unable to find a solution for this. Below is the equation which is required to be used. r^2= A^2*B^2/(A^2*sin
-
Connecting ipod classic to new iPad (4th generation)?
Which adapter connects older ipod classic to new iPad (4th generation)?
-
Keynote ask the last update, but I have this version, the number 6.5.2. Help me, please
-
Query executing multiple times
All, This question has been come up quite often in the OTN forum and i have not managed to get the answer. The issue is when i enable the logs i can see query getting fired multiple times : <TracingViewObjectSqlQueryExecution> <logQueryStatementAndBi