Problems with 10.7.X - need some help please
Where to begin???
New mac mini with 10.7.x
Double clicking the top of the window won't collapse window like in previous versions.
Double clicking on a folder that is on the desktop opens behind the hard drive window.
When restarting or logging back in, all my icons are in a different place (scattered) than where they were when logging out or shutting down. This is in reference to my hard drive window. I have everything there on icon view. All other sub folders are list view, no problems with those. How do I get 10.7.x to remember the window view?
I imported all my mail and mailboxes and sorted them where I wanted them from a mac mini running 10.4.11 and at the next restart they were all back where they were before I sorted them. I even threw out mailboxes that I didn't need anymore and they reappeared.
I am so confused. I almost feel like a bought a pc with a MS operating system.
And God forbid I need to reinstall the system, there is no way to do that because there is no dvd, let alone a dvd drive. And no I didn't sign up for icloud.
I know I sound kind of pi$$y, but I am frustrated and don't have a lot of time to devote to getting this straightened out.
I would really appreciate some assistance.
dnorth12 wrote:
And God forbid I need to reinstall the system, there is no way to do that because there is no dvd, let alone a dvd drive.
But there is a Recovery HD for just that purpose.
For some other things you may stumble over, see: Changes in Lion from Snow Leopard.
Similar Messages
-
Welcome to the Apple Community.
Unfortunately you can only enable Find my Phone while you have the device, I'm afraid there isn't anything you can do now. -
Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now. -
Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.
Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player. It may supply the codec it needs.
Not sure why you wouldn't be able to play straight avi files though in quicktime. -
My airport problem has returned big time --Need some Help!!
Aloha once again:
I though that this was fixed by simply changing channels on my airport router, but that fix only lasted for a few days, but now it's back and even worse. Let me give you some background on this problem. Here's my original message concerning the problem:
I have my Airport Router connected to the Internet via DSLcable. I then tie my two computers into the internet via their airport cards. For about 6 months this system has been working just fine. Recently my desktop computer quit listening to the router and can no longer connect to the internet. It shows no signal strength and the name of the network on the Airport is not seen in the "connect to internet" panel. The same Airport works just fine on my LapTop and I am using it right now to get this message off to the internet.
I have fixed permissions, removed the airport card and cleaned the connector, the antenna plug and removed the system configuration folder from library preferences all to no avail!
This problem has been hounding me, intermittently, for over a year now What can I do to remedy this??? HELP!!!!
Dan Page
Maui, Hawaii
The suggestion to change channels, that came from this original request, worked but just for a very short time. Now I have to shut down my computer overnight to get connected and then it only lasts for several hours and the connection quits.
I thought maybe heat was a problem, but the last time it happened I opened the computer and played a large fan right on the card. This did not help. I shut it down for the night and it was fine the next morning for about 2 hours.
One new data point; if I turn off just the airport on my laptop computer overnight, that will fix the problem for a short time also.
Still need some help!!!
DanFirst, power off both the Time Capsule and AirPort Express.
Wait a few minutes, then power up the Time Capsule first, and let it run for a few minutes.
Temporarily, move the AirPort Express to the same room or close proximity to the AirPort Express and power it up.
If the Express powers up correctly, power it off again and move it approximately half the distance between the Time Capsule and the general area that needs more wireless coverage. Try to minimize obstructions like walls, ceiling, heavy furniture, etc as much as possible.
Please report on your results. -
Ok i got my iPod from my brothers friend and my IPod says "iPod is disabled connect to iTunes" then my computer says cannot get onto iPod because I need the iPod passcode and of course I cannot put it in so I need some help please
Try placing in DFU mode and then restoreing.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Problems with my eMac. NEED YOUR HELP!
Hai,
I'm new right here, and i'm not very good at english, but I have problems with my eMac so I hope that someone can help me!
When I boot my Emac there's a screen that says:'
'to continye booting, type 'mac-boot' and press return.'
When I typed mac-boot I pressed enter(because I don't know the return-button) and then I get this screen:
'panic(cpu0): Unable to find driver for this platform: PowerMac6,4'
and other text with a lot of numbers.
Also in that screen stands:
'you need to restart your computer. hold the power button for several seconds or press the restart button'
I hold the power butten for several seconds and I put the computer on again, but than I'm getting the same texts&things.
So, can anyone help me, or do I have to go to the Macstore?(Does anybody know how much that costs?)
Thanks for reading& maybe helping!
Kisses from Amsterdam!There are so many unknowns here it is hard to know the right advice to give.
+I didn't get any disks with it. Do you know if I can buy them somewhere?+
You may be able to get 10.4 Tiger disks from an Apple store, but that depends on where you live. Apple usually only sells their latest OS which is currently 10.5 Leopard, but I would think your eMac would be best with 10.4 Tiger. If you can get them from an Apple store, ask if they give a student discount if you are eligible as that can be a saving.
Normally every Mac, _new or used has its own disks,_ including an Apple Hardware Test CD. These disks are useful if you want to reinstall your operating system, but also useful for diagnostics and and some software repairs. The thing is, you could get hold of some disks and still find your machine has something broken in the hardware, and you will have spent money on the disks for nothing.
It would be better to determine if the computer is fixable before you purchased any OS disks.
Do you know anyone with an Apple computer who has some disks you could borrow? Or do you know someone who has an iBook which you could use in
FireWire target disk mode to connect the two together , and use the Disk utility in the iBook to run a test on your hard drive.
Even without a disk, you could still try starting up your computer in single user mode and perform some of the steps in this article.
http://support.apple.com/kb/TS1411?viewlocale=en_US
which assumes you have 10.3.9 which you may have seeing as it is an old computer. -
I'm not that good with computers and I need some help....
I downloaded Adobe Reader 9.3.3 for windows 7 so I could print out sheet music (pdf file). When I try to open it using Adobe Reader, this pops up:
"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association for this program in the Default Programs control panel"
and I need to know what to do, to fix it. It might be a small problem, but I have no idea what to do. so could someone tell me in detail, how I'm supposed to fix this? thanks,Felix2000 wrote:
Actually, when I open Adobe Reader (just by itself) the same message appears, and if I close the pop-up, adobe reader closes.
That is very unusual - it appears that the Reader is not installed correctly. Can you open Control Panel, then Add/Remove Programs, and uninstall Adobe Reader. Then reinstall it from http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3.3/enu/AdbeRdr933_en_US.exe -
The mail application on my I-Mac dates all emails, in or out, as 5th (of whatever month it is). It seems to get the time right.
The computer clock is fine. I have no problem with my MacBook - just with the I-Mac. Any ideas, please?OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544 -
I am the biggest "Newb" on this site, and I really need some help please..
Ok, the short of it.... I started training on Database programming about 2 weeks ago. I still don't really know a thing, or even understand the concepts. Now, my boss wants me to fix a bug in Oracle, and I haven't a clue. The ONLY help I've gotten was a link to this forum, and a speech about how I need to help myself. I told him I have the same chance of fixing anything, as monkeys typing hamlet. Anyone up for a challenge?
When I go to Application System, then Application Entry and enter the password a dialog box appears.... "FRM-40039: Cannot attatch library Empower while opening from APPUSRAPP."
That's what I have to fix. I have no clue. I don't even really know how to click around in this program. Please help, someone.
UPDATE: I've been told that everyone's pretty much going to be a jerk to me for asking this, and I'm currently searching old threads and can't find a way to delete this one I posted. So, you could just ignore the post, or jump in and be the internet tough-guy and tell me what I already know.... I'm a newb.
Edited by: user11033020 on Apr 14, 2009 11:41 AMAs this appears to be a Forms error (the error begins with FRM) you might get a better response by posting this in the Forms forum:
Forms
The Community Feedback forum isn't meant for product-related questions (as it says in the title).
Still, you should consider searching Metalink as well. If you've paid for support, you have every right to use it. -
2100 WLC 1130 APs - need some help please
It's been about 5 years since I took my CCNA course and could use some help on a wireless set up for church.
We have a Catalyst 3550 that is running fine, just a few VLANs, including 30 for public wireless. I've then got a 2100 WLC and (3) 1130 AP's. After much head banging, I've got the WLC set up correctly (i believe)
VLAN 30 is a 10.0.3.x segment
switch is 10.0.3.1
WLC mgmt interface is 10.0.3.20 - connected to the switch on port 1
WLC ap mgmt interface is 10.0.3.21
APs pull 10.0.3.30, 31,32. - they are plugged directly into the switch
I can obviously see the APs while in the WLC GUI.
The AP's SSID don't show up wirelessly. The AP's circle is red/orange
The detail on the AP in the WLC shows them operationally down.
What additional information can I provide?
Much thanks.flashfs[0]: 28 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6973952
flashfs[0]: Bytes available: 9025024
flashfs[0]: flashfs fsck took 28 seconds.
Base ethernet MAC Address: 00:0a:b8:12:30:3c
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
Loading "flash:/c1130-k9w8-mx.124-23c.JA4/c1130-k9w8-mx.124-23c.JA4"...#########
File "flash:/c1130-k9w8-mx.124-23c.JA4/c1130-k9w8-mx.124-23c.JA4" uncompressed a
nd installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(23c)JA4, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Fri 27-Jan-12 19:52 by prod_rel_team
Proceeding with system init
Proceeding to unmask interrupts
Initializing flashfs...
flashfs[1]: 28 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15740928
flashfs[1]: Bytes used: 6973952
flashfs[1]: Bytes available: 8766976
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
Radio0 present A506 7100 E8000000 A0000000 80000000 3
Radio1 present A506 6700 E8000100 A0040000 80010000 2
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-LAP1131AG-A-K9 (PowerPCElvis) processor (revision A0) with 27638K/51
20K bytes of memory.
Processor board ID FTX1027T1S2
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 7.0.230.0
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0A:B8:12:30:3C
Part Number : 73-8962-09
PCA Assembly Number : 800-24818-08
PCA Revision Number : A0
PCB Serial Number : FOC102618H2
Top Assembly Part Number : 800-25544-06
Top Assembly Serial Number : FTX1027T1S2
Top Revision Number : A0
Product/Model Number : AIR-LAP1131AG-A-K9
% Please define a domain-name first.
Press RETURN to get started!
*Mar 1 00:00:05.580: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self t
est passed
*Mar 1 00:00:07.185: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self
test passed on interface Dot11Radio 0
*Mar 1 00:00:08.783: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self
test passed on interface Dot11Radio 1
*Mar 1 00:00:08.860: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log
(contains, 135 messages)
*Mar 1 00:00:08.889: status of voice_diag_test from WLC is false
*Mar 1 00:00:10.995: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
up
*Mar 1 00:00:11.052: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(23c)JA4, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Fri 27-Jan-12 19:52 by prod_rel_team
*Mar 1 00:00:11.053: %SNMP-5-COLDSTART: SNMP agent on host CenterHall is underg
oing a cold start
*Mar 1 00:00:11.133: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:00:11.312: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:11.312: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:11.312: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:11.552: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to r
eset
*Mar 1 00:00:11.552: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
eset
*Mar 1 00:00:11.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to up
*Mar 1 00:00:12.316: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to down
*Mar 1 00:00:12.316: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
1, changed state to down
*Mar 1 00:00:19.436: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D
HCP address 10.0.3.30, mask 255.255.255.0, hostname CenterHall
*Mar 1 00:00:29.995: status of voice_diag_test from WLC is false
*Mar 1 00:00:30.070: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:00:30.123: %CDP_PD-2-POWER_LOW: All radios disabled - HIGH_POWER_CLAS
SIC_NOT_CONFIGURED WS-C3550-12T (000a.8a97.f785)
*Mar 1 00:00:31.123: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.
255 started - CLI initiated
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (8.8.8.8)
Translating "CISCO-LWAPP-CONTROLLER"...domain server (8.8.8.8)
*Feb 11 15:46:42.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
p: 10.0.3.21 peer_port: 5246
*Feb 11 15:46:43.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
wmmAC status is FALSE
*Feb 11 15:46:44.672: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
peer_ip: 10.0.3.21 peer_port: 5246
*Feb 11 15:46:44.674: %CAPWAP-5-SENDJOIN: sending Join Request to 10.0.3.21
*Feb 11 15:46:44.674: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Feb 11 15:46:45.449: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Feb 11 15:46:45.718: %CAPWAP-5-CHANGED: CAPWAP changed state to UP
*Feb 11 15:46:45.767: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller grace
wireless
*Feb 11 15:46:45.815: %LWAPP-3-CLIENTEVENTLOG: SSID GUMC_Guest added to the slot
[0]
*Feb 11 15:46:45.818: %LWAPP-3-CLIENTEVENTLOG: SSID GUMC_Guest added to the slot
[1]
*Feb 11 15:46:45.834: %WIDS-5-ENABLED: IDS Signature is loaded and enabled
User Access Verification
Username: Cisco
Password:
CenterHall> -
Really really need some help please.
lost all my audio. nothing plays anymore. cant even hear the trash empty any more. no itunes, nothing. no dvd audio. also noticed itunes wont play songs anymore, progress bar just sits there. also movies on youtube dont play anymore. when i try to turn up audio i get a zero symbol with a slash thru it. im stumped. help please. thanks
Whatever has happened, I've assumed it just happened and is systemic.
To start: Go to Applications/Utilities and run Disk Utility, select your startup drive, and click on the Repair Permissions button at the bottom of the window.
If that works, you're done, if not, pull out your Tiger startup DVD, insert it, select the Installer, and Restart your Mac from the DVD. When you get to the installer screen, go to the menus at the top of the screen and select Disk Utility, and this time click on the Repair Disk button. This will check your file system integrity and repair it.
When you've done that, post back.
If those don't work, you may need to do an Archive & Install, from this same DVD. This will preserve your accounts/apps/data, but will require you to repeatedly run Software Update to bring everything current again.
Good Luck... -
Problems with actionListeners on CardLayout...Help Please
I'm having a problem with my clear button on card2 in my code. When pressed it will not clear the data, and I don't see anything wrong with the code. Am I overlooking something? Please take a look at the long code I have posted and let me know what is going on with this if you could.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.text.*;
public class BankGUI implements ItemListener
JPanel cards;
final String main = "Main menu";
final String addCust = "Add a new customer";
final String upCust = "Change a current customer's information";
final String addAcct = "Add a new account";
final String withdrawl = "Withdrawl monies from an account";
final String deposit = "Deposit monies into an account";
final String report = "Run report to show all accounts";
JComboBox cb;
JRadioButton savings, checking;
JCheckBox yes, no;
JLabel firstNameLabel, lastNameLabel, addressLabel, cityLabel, stateLabel,
phoneLabel, customerNumbLabel, accountNumbLabel, depositLabel,
accountTypeLabel, savingsProLabel, balanceLabel, withdrawlLabel;
JTextField firstNameField, lastNameField, addressField, cityField,
stateField, phoneField, customerNumbField, accountNumbField,
depositField, accountTypeField, balanceField, withdrawlField;
JButton submit1, submit3, submit4, submit5, submit6, clear, logoff, run, find,
delete, update, runReport;
JFrame f;
String firstName;
String lastName;
String address;
String city;
String state;
String phoneNumber;
String customerNumber;
Controller cont;
Customer cust;
public void addComponent(Container pane)
JPanel comboBoxPane = new JPanel();
String comboBoxItems[] = {main, addCust, upCust, addAcct,
withdrawl, deposit, report};
JComboBox cb = new JComboBox(comboBoxItems);
cb.setEditable(false);
cb.addItemListener(this);
comboBoxPane.add(cb);
JPanel card1 = new JPanel(); //main menu
logoff = new JButton("Logoff");
logoff.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent l)
cont = new Controller();
cont.wrapUp();
card1.add(logoff); //end main menu
JPanel card2 = new JPanel(new GridLayout(0,4,1,1)); //add customer
firstNameLabel = new JLabel("First Name:", SwingConstants.RIGHT);
card2.add(firstNameLabel);
firstNameField = new JTextField("", 10);
card2.add(firstNameField);
lastNameLabel = new JLabel("Last Name:", SwingConstants.RIGHT);
card2.add(lastNameLabel);
lastNameField = new JTextField("", 10);
card2.add(lastNameField);
addressLabel = new JLabel("Address:", SwingConstants.RIGHT);
card2.add(addressLabel);
addressField = new JTextField("", 10);
card2.add(addressField);
cityLabel = new JLabel("City:", SwingConstants.RIGHT);
card2.add(cityLabel);
cityField = new JTextField("", 10);
card2.add(cityField);
stateLabel = new JLabel("State:", SwingConstants.RIGHT);
card2.add(stateLabel);
stateField = new JTextField("", 10);
card2.add(stateField);
phoneLabel = new JLabel("Phone Number:", SwingConstants.RIGHT);
card2.add(phoneLabel);
phoneField = new JTextField("", 10);
card2.add(phoneField);
customerNumbLabel = new JLabel("Customer Number (SSN):", SwingConstants.RIGHT);
card2.add(customerNumbLabel);
customerNumbField = new JTextField("", 10);
card2.add(customerNumbField);
card2.add(new JLabel(""));
card2.add(new JLabel(""));
card2.add(new JLabel(""));
submit1 = new JButton("Submit");
/*submit1.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent s1)
firstName = firstNameField.getText();
lastName = lastNameField.getText();
address = addressField.getText();
city = cityField.getText();
state = stateField.getText();
phoneNumber = phoneField.getText();
customerNumber = customerNumbField.getText();
Customer cust = new Customer(firstName, lastName, address, city, state, phoneNumber, customerNumber);
System.out.println(cust.getFirstName());
card2.add(submit1);
clear = new JButton("Clear");
clear.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent c)
firstNameField.setText("");
lastNameField.setText("");
addressField.setText("");
cityField.setText("");
stateField.setText("");
phoneField.setText("");
customerNumbField.setText("");
firstNameField.requestFocus();
card2.add(clear); //end add customer
JPanel card3 = new JPanel(new GridLayout(0,4,1,1)); //update customer
card3.add(new JLabel(""));
customerNumbLabel = new JLabel("Customer Number (SSN):", SwingConstants.RIGHT);
card3.add(customerNumbLabel);
customerNumbField = new JTextField("", 10);
card3.add(customerNumbField);
card3.add(new JLabel(""));
card3.add(new JLabel(""));
card3.add(new JLabel(""));
find = new JButton("Find");
card3.add(find);
card3.add(new JLabel(""));
card3.add(new JLabel(""));
card3.add(new JLabel(""));
card3.add(new JLabel(""));
card3.add(new JLabel(""));
firstNameLabel = new JLabel("First Name:", SwingConstants.RIGHT);
card3.add(firstNameLabel);
firstNameField = new JTextField("", 10);
card3.add(firstNameField);
lastNameLabel = new JLabel("Last Name:", SwingConstants.RIGHT);
card3.add(lastNameLabel);
lastNameField = new JTextField("", 10);
card3.add(lastNameField);
addressLabel = new JLabel("Address:", SwingConstants.RIGHT);
card3.add(addressLabel);
addressField = new JTextField("", 10);
card3.add(addressField);
cityLabel = new JLabel("City:", SwingConstants.RIGHT);
card3.add(cityLabel);
cityField = new JTextField("", 10);
card3.add(cityField);
stateLabel = new JLabel("State:", SwingConstants.RIGHT);
card3.add(stateLabel);
stateField = new JTextField("", 10);
card3.add(stateField);
phoneLabel = new JLabel("Phone Number:", SwingConstants.RIGHT);
card3.add(phoneLabel);
phoneField = new JTextField("", 10);
card3.add(phoneField);
card3.add(new JLabel(""));
submit3 = new JButton("Save Changes");
card3.add(submit3); //end update customer
JPanel card4 = new JPanel(new GridLayout(0,4,1,1)); //add account
customerNumbLabel = new JLabel("Customer Number (SSN):", SwingConstants.RIGHT);
card4.add(customerNumbLabel);
customerNumbField = new JTextField("", 10);
card4.add(customerNumbField);
card4.add(new JLabel(""));
card4.add(new JLabel(""));
accountNumbLabel = new JLabel("Account Number:", SwingConstants.RIGHT);
card4.add(accountNumbLabel);
accountNumbField = new JTextField("", 10);
card4.add(accountNumbField);
card4.add(new JLabel(""));
card4.add(new JLabel(""));
accountTypeLabel = new JLabel("Account Type:", SwingConstants.RIGHT);
card4.add(accountTypeLabel);
savings = new JRadioButton("Savings");
card4.add(savings);
checking = new JRadioButton("Checking");
card4.add(checking);
card4.add(new JLabel(""));
depositLabel = new JLabel("Deposit Amount:", SwingConstants.RIGHT);
card4.add(depositLabel);
depositField = new JTextField("", 10);
card4.add(depositField);
card4.add(new JLabel(""));
card4.add(new JLabel(""));
submit4 = new JButton("Submit");
card4.add(submit4);//end add account
JPanel card5 = new JPanel(new GridLayout(0,4,1,1)); //withdrawl
accountNumbLabel = new JLabel("Account Number:", SwingConstants.RIGHT);
card5.add(accountNumbLabel);
accountNumbField = new JTextField("", 10);
card5.add(accountNumbField);
card5.add(new JLabel(""));
card5.add(new JLabel(""));
withdrawlLabel = new JLabel("Withdrawl Amount:", SwingConstants.RIGHT);
card5.add(withdrawlLabel);
withdrawlField = new JTextField("", 10);
card5.add(withdrawlField);
card5.add(new JLabel(""));
card5.add(new JLabel(""));
submit5 = new JButton("Submit");
card5.add(submit5);//end withdrawl
JPanel card6 = new JPanel(new GridLayout(0,4,1,1)); //deposit
accountNumbLabel = new JLabel("Account Number:", SwingConstants.RIGHT);
card6.add(accountNumbLabel);
accountNumbField = new JTextField("", 10);
card6.add(accountNumbField);
card6.add(new JLabel(""));
card6.add(new JLabel(""));
depositLabel = new JLabel("Deposit Amount:", SwingConstants.RIGHT);
card6.add(depositLabel);
depositField = new JTextField("", 10);
card6.add(depositField);
card6.add(new JLabel(""));
card6.add(new JLabel(""));
submit6 = new JButton("Submit");
card6.add(submit6);//end deposit
JPanel card7 = new JPanel(); //run report
card7.add(new JLabel(""));
runReport = new JButton("Run Report");
card7.add(runReport);//end report
cards = new JPanel(new CardLayout());
cards.add(card1, main);
cards.add(card2, addCust);
cards.add(card3, upCust);
cards.add(card4, addAcct);
cards.add(card5, withdrawl);
cards.add(card6, deposit);
cards.add(card7, report);
pane.add(comboBoxPane, BorderLayout.PAGE_START);
pane.add(cards);
public void itemStateChanged(ItemEvent evt)
CardLayout cl = (CardLayout)(cards.getLayout());
cl.show(cards, (String)evt.getItem());
public void createGUI()
f = new JFrame("Bank of Sean");
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
BankGUI bankGUI = new BankGUI();
bankGUI.addComponent(f.getContentPane());
f.pack();
f.setVisible(true);
public static void main(String[] args)
javax.swing.SwingUtilities.invokeLater(new Runnable()
public void run()
BankGUI bankGUI = new BankGUI();
bankGUI.createGUI();
}You have a generic problem that is illustrated by looking at your 'firstNameField'. You define just one 'firstNameField' variable and then allocated a value several times so that the content of 'firstNameField' add to card2 using
card2.add(firstNameField);
does not refer to the same object as is used in your action listener
firstNameField.setText("");
because in your card3 section you overwrite the original content ot the reference.
You can fix this by sharing a Document e.g.
Document doc = firstNameField.getDocument();
firstNameField = new JTextField(doc, "", 10);
card3.add(firstNameField);
for each time a new field is reqired. -
DVI to TV problem. I need some help please
OK, Im running a MAcbook pro latest OSX all updates etc... In the past i have been able to plug in the adapter to the DVI and run on end of an RCA cable out of it to the RCA video in on any tv. I would normally just hit f7 and the display would be seen on the tv. The problem is now I can get a picture on the tv what so ever. I have tried the detect display feature and no luck. I have tried multiple tvs and cables..no luck....
No when i connect to an external computer monitor using the other DVI adapter everything is fine on the external monitor.
I believe the problem started when I hooked up the external computer monitor. It seems some setting has changed that will only recognize the the computer monitor.
I don't think its the DVI to to tv adapter having a problem as it's newer..never been abused or anything like that... Im very confused and frustrated any help would be appreciated
thanks
pspThis means that the phone was previously unlocked by unauthorized methods and becomes re-locked whenever you update or restore the iOS.
Only the original carrier can unlock your phone by authorized means that will be permanent. Many carriers do not offer unlocking, particularly if you don't have an account with them. -
Bit of a problem need some help please
import java.io.*;
class IO
public static void main(String args[])
String sOutString = "";
int iRecordLength = 0;
int iWork=0;
int[] array = new int[21];
try
// creat input file, buffer.
FileInputStream fis = new FileInputStream("myInFile.txt");
BufferedInputStream bis = new BufferedInputStream(fis);
DataInputStream dis = new DataInputStream(bis);
// Create an output
String fileName = "myOutFile.txt";
File myOutFile = new File(fileName);
FileOutputStream outStream = new FileOutputStream(myOutFile);
PrintWriter out = new PrintWriter(outStream);
out.println ("This is the header record");
String record = null;
while ( (record=dis.readLine() ) != null )
String sTest = "";
sTest = record;
if (iWork==0)
iRecordLength = sTest.length();
sOutString = sTest.substring(0, iRecordLength);
System.out.println(sOutString);
out.println (sOutString);
System.out.println(sTest.substring(0, 5));
out.close();
// System.out.print ("\n");
catch (IOException e)
System.err.println("File Error; " + e);
System.out.println("");
System.out.println("Ended");
System.exit(0);
// use get chars w substring
Ok theres my code what im trying to do is substring my in file so that it will take a section of it out and put the rest in
an out file. The problem is that my in file has a few lines and i do not know how to dubstrin g different linec can anyone help me?Well,
I took the liberty of rewriting your code to make it readable, and expurgated most of the carp... what you've got there boils down to a really complicated-azzed implementation of cat.
package forums;
import java.io.BufferedReader;
import java.io.FileReader;
import java.io.PrintWriter;
import java.io.BufferedWriter;
import java.io.FileWriter;
import java.io.IOException;
class FileCatterator {
public static void main(String args[]) {
BufferedReader input = null;
PrintWriter output = null;
try {
input = new BufferedReader(new FileReader("FileCatterator.java"));
output = new PrintWriter(new BufferedWriter(new FileWriter("FileCatterator.txt")));
String line = null;
while ( (line=input.readLine()) != null ) {
int len = line.length();
String substring = line.substring(0, len);
System.out.println(substring);
output.println(substring);
} catch (Exception e) {
e.printStackTrace();
} finally {
if(input!=null)try{input.close();}catch(IOException e){e.printStackTrace();}
if(output!=null)output.close();
}The substring doesn't do anything.
Now, What did you need it to do? Print the first so-many characters of each line or something?
Maybe you are looking for
-
One of my work computers is running Acrobat 7 pro and has all the current updates. Whenever I attempt to view an .AVI that is imbedded in a PDF file the program crashes. I can view the .AVI files in windows media player, however once the clips are in
-
Hello, I got some problems with Windows and Bootcamp, and now I want to manual backup my Macintosh HD hard drive. My question: What exactly files should I copy/paste for these fonctions: 1.Safari bookmarks 2.Stickies That's it, I hope I am not forget
-
I have created a multiprovider with three ODS . In two of them I have loaded data through flat file and the other from SAP R3 . In one field loaded from flat file is of Decimal type of length 9 but in R3 it is floating point with length 16. Another o
-
hi guys. gota 2010 mac mini but want to upgrade so i can stream from mac mini to apple tv. but some herd some bad reviews about os x moutain lion. any of it true?
-
Hi, I have a question concerning the sync time. Our current application uses 5 (developed) SyncBOs, each sync we have all in all about 500 records that are moved splitted on these syncbos. Currently a sync action takes about 1min which seems quite lo