Problems with 16:9 export

I add .mpg files to the Sequence with following parameters:
Image Size: 720 x 576
Pixel Depth: 720
Frame Rate: 25,00
Total Duration: 00:01:26:10
Average Data Rate: 957 KB / second
Pixel Aspect Ratio: 1,422 (1,422)
Then I add fiel to timeline and try to export it to a movie with following settings:
File Type: Microsoft DV AVI
Compressor: DV AVI
Frame Size: 720x576 16:9
Frame Rate: 25,00 fps
Pixel Aspet Ratio: D1/DV PAL Widescreen 16:9 (1.422)
In result I get an .avi file which is in fatc is 4:3 and the picture is streched vertically....
I tried to make it render in 16:9 but with no luck...
Please help me to make Premiere CS3 export the sequence to a movie in .avi but in 16:9...
Thank you.

See this thread in the Windows forum:
http://www.adobeforums.com/webx/.59b5a948/5

Similar Messages

  • Help me, I have a problem with font when export report to PDF?

    Hi everyone! Help me
    I have a problem with font when export report to PDF
    My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
    when desige template no problem, error only happen when view report by PDF.
    Edited by: user10236405 on Oct 15, 2008 11:23 PM

    give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

  • Problem with Import and Export Data Wizard

    Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
    to use.
    After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
    and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
    displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
    I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
    How can I correct this problem?

    First can you please post all log file errors
    >> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
    1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
    If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
    2. You can try reinstall from start (In this case you have to make sure that you un-install all)
    [Personal Site] [Blog] [Facebook]

  • Problem with image after exporting from Lightroom 5

    Good day. Please can someone help me? I have Lightroom 5, and I have a problem in exporting edited images. At issue, do all the necessary settings and retreat noise and sharpness adjustment by brush adjustment tool, however, to export the image, noise and some minor adjustments are lost. Because in Lightroom visualize the way you wish, but after export, is not it the same? How do I get a different result? Thank you all!

    I have the same problem!
    Something got broken with my Lightroom 5.6 (Windows 7Pro)  two days ago and I don't see any adjustments made with brush after exporting photos!
    It's not a problem of library or RAW files - the same, work fine on other computers (iMac).
    I tried to clean the computer with CC Cleaner Tool, and install everything again, but it didn't help.
    I already lost 2 days trying to fix it, and I don't want to format the drive and install Windows again
    Can anyone help?

  • Problem with displaying images exported to PS

    This is slightly different than the post about TIFF files not displaying properly.
    In Aperture 1.2, when I exported an image to PS and did extensive work on it, and then saved back to Aperture, it would appear in Aperture just as it looked in PS when I saved it.
    However, in 1.5, that does not happen. After I save the image, and then go back to Aperture, all of the changes I made in PS don't appear! However, if I again open the image in PS a second time, it will change to the PS version even before the image gets to PS (I can see it change right when I click "open with external editor").
    Is this a difference with how 1.2 and 1.5 handle the files? I'm guessing it has something to do with image previews, because I chose not to have Aperture generate previews when I installed 1.5 due to the slow-down issues I saw reported here.
    I'm starting to wonder what the point of upgrading to 1.5 was for me... if I can't take advantage of previews (accessing my Aperture library from other apps like Keynote, etc) and if the PS files I work on don't display properly, I'd rather go back to 1.2. This is a major problem in my workflow, since I often spend a lot of time working on images in PS, and I need to be able to see them that way when I return to Aperture.
    I'm hoping there's some setting somewhere I can use to fix this. Is there?

    David,
    I really appreciate your offer to help. However, I have the problem with all images in my library in all projects, so I'm not sure how useful it would be for you to work with a single image I upload to a server.
    I'm having the same problem on my MacBook too, though for some unknown reason there are certain projects on my MacBook that the process works fine with. I cannot tell any difference between those projects (that work) and those that don't.
    What's even more strange... if I quit Aperture, and re-open it, and then go through the process (open a file in PS2, save, return to Aperture) - it works fine! But ONLY ONE TIME. If I try the same process again, on that same image, or any other image in my library, it will not work. It only works the FIRST TIME I do it after opening Aperture. I tested this several times and got the same result.
    I am completely stumped here. I've tried generating previews for a project and turning all of the preview options on, but that doesn't solve the problem either.
    Anyone out there have a clue what might be happening? This is more than a minor inconvenience... if my image management system can't display the image as it should appear, it's unusable.
    Chris

  • Problems with audio when exporting to movies

    Hi All,
    I teach sequencing and one of the projects is to score a short piece of music to film.  Logic Pro 9 is great for this (though beat mapping isn't the most friendly of functions) and my students (most only 16-18 years old) have made some great projects.
    Right the question is what are the best settings to use when exporting the audio to movie?  Some students don't get any sound when bounced or some are getting the oprginal with the new audio (doubled).
    To assess and store student work we use vimeo for video projects and the wierdest thing is that when uploaded these bounces (the ones that worked) have no sound at all.
    Never had these issues with Logic 8 and just wondering if anyone has any ideas on how I can resolve this?
    Thanks and happy new year.

    I've used flip4mac for about a year and have had no problems with it. I mostly use it to export preview versions for windoze people. The quality is very good, though it takes significantly longer to export than a similar-quality quicktime movie.

  • Sound Problem with Imovie09 after export to idvd

    Hi !
    When I export my project to IDVD, I've got problem with the soundtrack of my project,the original sound of my videos disappear, I can hear "ghost" sounds (like wind) of my videos but at wrong place in the project. It doesn't appear in the timeline of imovie.
    Can someone help me ?

    Hi, Paul,
    iMovie 'renders' slo-mo in a way that you don't really want--as you discovered. So, get your movie into iDVD without letting iMovie render it. Try doing it this way:
    Instead of sending your iMovie to iDVD from within iMovie, close iMovie.
    Open iDVD, and create a new project. Click on the 'custom' button, and navigate to the 'Media' tab. Select 'Movies' and find your iMovie in the little window. Drag it onto the iDVD screen. Be sure not to put it into a drop zone. Then, make the titles and buttons the way you wish.
    Save the DVD as disk image. You can play that after it is finished to see if the sound is what you want. If so, go ahead and burn your DVD.
    Hope this helps!!

  • Is there a problem with Indesign effects exporting to PDF?

    Hi All... Since updating to the latest version of Indesign, I can't seem to get my effects to work when I export into a PDF? Am I doing something wrong or is there a problem with the new version of Indesign? I have a job that I'm urgently trying to get out but can't get the drop shadow or bevel emboss to transfer to the PDF that needs to go to my client? Can anyone help me with this ASAP pleeeeease???

    RAZ! wrote:
    It looks OK in the Indesign overprint preview and I usually have my Acrobat set to view overprint as well so I turned it off & on just in case there was something happening there, but no luck!
    I am using a spot colour in the background behind the graphic but not on the graphic itself, but I don't think that should effect it as I'm sure I've done this many times (But I am starting to doubt myself now... lol)?
    It looks OK in the Indesign overprint preview
    I am using a spot colour in the background behind the graphic but not on the graphic itself…
    That is reason, why it looks like it looks. But what happens if you replace the spot to a process color?

  • Problems with the report export in PDF format

    Hi All,
    I am new to this forum.
    I'm developing a web application that uses Java Reporting Component (JRC) to display crystal reports.
    I have three problem:
    1) I want, after entering the filters in a jsp, to print a report in PDF format (WORD) without opening it
    with Adobe Reader (Microsoft Word). The class of API JRC used for export is ReportExportControl.
    2) I want to print multiple reports one after the other to reduce the time (possibly joining two or more reports into a single PDF)
    3) I want to insert, in the jsp page filters, the number of pages to print from the same report (without
    opening it with Adobe Reader (Microsoft Word))
    Can anyone help me? or can give a simple java code to do the same.
    Thanks in advance.

    Hi, this works for me in 4.6B:
      CALL FUNCTION 'GUI_DOWNLOAD'
           EXPORTING
            BIN_FILESIZE            =
               filename                = i_pfad
               filetype                = 'BIN'
       IMPORTING
            FILELENGTH              =
          TABLES
                data_tab                = i_att_cont
          EXCEPTIONS
               file_write_error        = 1
               no_batch                = 2
               gui_refuse_filetransfer = 3
               invalid_type            = 4
               OTHERS                  = 5.
      IF sy-subrc <> 0.
        MESSAGE i000(zv) WITH 'Problem mit PDF Darstellung'.
      ENDIF.
      CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
           EXPORTING
                spoolid = spoolnr.
      CALL FUNCTION 'WS_EXECUTE'
           EXPORTING
                document           = ' '
                commandline        = i_pfad
                program            = 'AcroRd32.exe'
           EXCEPTIONS
                frontend_error     = 1
                no_batch           = 2
                prog_not_found     = 3
                illegal_option     = 4
                gui_refuse_execute = 5
                OTHERS             = 6.
      IF sy-subrc <> 0.
        MESSAGE i000(zv) WITH 'Acrobat Reader nicht gefunden!'.
      ENDIF.

  • Problem with InDesign CC exported epub for upload to IngramSpark

    I am completely frustrated with IngramSpark.  I have an epub file exported directly from InDesign and it repeatedly is being rejected by Ingram with the following message:
    Adobe Format Rejected - Invalid Metadata or Content File
    04/10/2014 12:05:48
    Conversion Error: An error has occurred during the packaging process: E_PACK_ERROR http://localhost:8085/packaging/Package File%20already%20encrypted%20or%20unexcpected%20font%20mangling%20algorithm:%20http://www.idpf.org/2008/embedding Request XML was: &lt;package xmlns=&quot;http://ns.adobe.com/adept"> &lt;location&gt;ftp://LIGHTNINGSOURCE\autoftp:s3tpwd@localhost/GBTargets/9780985849405.enc</location> &lt;src&gt;http://ebook.lightningsource.com/TitleDownload/LSCFD.dll?hdlr=ADEPT&
    Ingram claims the E_PACK_ERROR is the problem and that it originates on my end.  We (the author and I) have tried numerous times via Verizon and AT&T servers to upload the file.  I have vetted the file for anything extraneous, even replacing an ornamental font with just the one font family, Adobe Caslon Pro.  I do not encrypt any files on my computer.
    I do not know what else I can do to avoid the E_PACK_ERROR.  Any suggestions would be of great assistance. This file passes muster with no errors when run through any of several different epub "validators", and the book performs flawlessly on Android phones and tablets, iPhones, and Windows and Mac PCs using several different ebook readers.

    If the support staff at Ingram Spark is not helpful, maybe you'll just have to deal with the eBook sellers yourself. If the file passes IDPF validation, and if it view correctly on the eBooks you want it on, then the problem is at their end, not yours.

  • Problem with symbols while exporting a gif in flash cs4

    I am using flash cs4 to export a simple animated gif for a button on my website. However, when I export the gif the movie symbols will not play, what am I doing wrong here?

    Well, for some reason, I've managed to be okay with the idea that all software relying on links is prone to crushing at any given moment during execution of a project, Yes this includes After effects, Illustrator, Indesign_name it. However, one thing I cannot understand or even come to terms with the idea that Flash CS4 cannot export a project of 162mb. My library is organised, My scenes are in perfect order,  I do not even use 3rd party componets in my projects..... but for some reason, I cannot export let alone publish an application file from FLASH CS4.
    My first thought was maybe some thing was wrong with the "flash.ocx" extension, so I took a walk and visited the Adobe site to get an update, but still after re-installing it nothing seems to put a smile on my face_( I've spent sleepless nights on this animation and all I need is to just export/ publish it, however flash exports it halfway and out of a blue the export dialog and the incomplete file vanish) Some times I  even wonder wether there is a vortex on my desktop.
    Another problem in this category am finding is with flash player in my browsers, if it runs in exlporer, then it won't run in firefox, and when I check in the control panel after installing on both browsers, I am so suprised to find 4plugins of flash player, which is not the case with my friends laptops which use 1plugin and an activeX control for the web browsers.
    Any help is very welcome, Am using Dell studio-xps Laptop running a 64bit  Windows Vista OS, 4bg Ram, 1 Terabyte HDD and yes Intel Graphics media card with dedicated memory of 1gb. (Of what use are they if I cannot export a small file of 162mb, am even ashamed to mention it, heeeeeelp  )

  • Problems with superscript when exporting to PDF

    If one writes in a table cell for example "100m3 tank" with 3 as a superscript, then exports the document to PDF, the
    "3 tank" disappears, likewise if one just writes "100m3", the 3 disappears. However, if you just write "m3", the three in superscript remains. Any fixes for this bug? How can I report it to Apple?

    I just came across this same problem -- similar but not exactly the same.
    Text in a table does not print properly when text is superscripted.
    This is a problem since we have a French invoice that has a fair bit of superscript. I tried to work around by decreasing the font size and increasing the baseline, but this did not work.
    I'm using Pages 5.1 and Mavericks.
    Anyone have any ideas????

  • Problems with EXIF when exporting portrait style pictures.

    So, I just recently upgraded 09 with the intention of using it to organize my photography work. I didn't work much with 08 and didn't have any photos in it so I don't know if this has always been a problem or not. When I import photos that have been shot vertically, in portrait mode, something is being done to the EXIF data, other than it being rotated. My camera has auto-rotate on and they were originally transfered with the software Canon gives you. Anyways, when I export these photos, whether by dragging tot he desktop or File >> Export, and then open it in another program, such as preview, and attempt to view the EXIF data, it's nonexistent. I should mention that these photos were not edited in any way in iPhoto, just imported and then exported. Also, the EXIF data can be viewed in iPhoto, just not anywhere else apparently.
    I've sort of solved the problem just by trial and error but I still don't know what causes it. When I select these photos and use "Revert to Original", they export perfectly and have all the EXIF data. Also, if I edit the photo somehow, enhance, etc., the EXIF seems to come back when I export. This only seems to affect the photos shot in portrait so I can only imagine it has something to do with how iPhoto deals with the autorotate function on already rotated photos. I decided I would try to import directly to iPhoto rather than import from camera with the Canon software and then import into iPhoto to see if it was the Canon software but the same issue occurs. So, my options at this point are to just select all my photos that I import and revert to original or turn off autorotate on my camera and sift through my photos and manually rotate them. The former isn't a huge deal but it would be a lot more convenient if all my EXIF didn't get erased every time I take a portrait shot in and out of iPhoto. Other than that, I don't seem to see any option to change how photos are imported but maybe I'm missing something obvious.
    I was wondering if anyone else has this issue, or if it was a problem in iPhoto '08. If it matters, my camera is a Rebel XT.

    When iPhoto rotates the auto rotated photos from your Canon the modified file that gets creates loses much of the EXIF data. To get the EXIF data included in the file you have to export the file to the desktop via File->Export->File Export and select the option to include the title and keywords.
    Another way is to turn off the auto-rotate in the camera, upload to the desktop first where you can losslessly rotate those files with PhotoTool CM orXee. Then import into iPhoto. That way no modified file is created and if you drag the photo to the desktop you'll be getting the original file which contains the EXIF data.

  • Problem with diacritics when export in Acrobat(PDF)

    Hello,
    I use reporting service from Sql Server 2008 R2 and I have a problem when I export in Acrobat(PDF) format. All the 'ș' and 'ț' are after export in pdf just a square.
    Can you please help me. Thanks.

    Hi Alin-g,
    SQL Server 2008 R2 Reporting Services supports Adobe Acrobat 6 or later. So, please make sure your current Acrobat version meets the requirement.
    Besides, the font in the PDF format may be different with that in the HTML rendering extension because GDI font substitution in those formats behaves differently. If there is a font missing on the client, you might see characters replaced with boxes (□).
    For more information, please see:
    Exporting to a PDF File (Report Builder 3.0 and SSRS)
    Regards,
    Mike Yin
    TechNet Community Support

  • Problem with running database export

    i try to run my database export which i normally do everyday and it works fine but of recent i started receiving this error
    Exp00008:Oracle error 4063 encountered
    Ora04063:package body dmsys.dbms_om_util has errors.
    Ora 06508 :pl/sql could not find program unit being called.
    Ora 06512: at "DMSYS.DBMS_DM_MODEL_EXP"line 89
    "DMSYS.DBMS_DM_MODEL_EXP"line 763
    Ora06512 : at line 1
    Exp00083:The previous problem occured when calling DMSYS.DBMS_DM_MODEL_EXP.schema_info.exp.
    export was terminated successfully with errors.
    pls i need solutions immediately

    Hello Ajani Abd-Rahman,
    Maybe you should try to re-install the export catalog and then recompile all procs?
    @?/rdbms/admin/catexp7.sql
    @?/rdbms/admin/utlrp.sqlOr check on Metalink for a bug.
    HTH,
    Yoann.

  • Weird audio problems with Motion when exporting quicktime videos

    I have a Motion project with 2 video clips of people talking. When I create a RAM preview everything plays back fine. When I export a quicktime, the first second or so of each video clip (within the quicktime) have no audio. I've adjusted the in and out of each clip in Motion but I don't think that would make the audio disappear on export. Thinking it was just a bad export, I tried just exporting the audio and the same thing happens.
    Here's what i'm using:
    Mac Pro dual 3.0 Xeon
    10 gigs of RAM
    Motion 2.1.2

    hi,
    motion 2 had some odd audio problems that surfaced now and then. The only way round it was to bring the clip into FCP and edit the audio in there, and then export from fcp.
    Motion 3 might have fixed this. Not sure havent had the problem for some time, since I make sure all finnishing is done in FCP.
    hope this helps
    adam

Maybe you are looking for