Problems with 23'' Cinema (model 1082) and PC notebook

Hello folks,
I am trying to connect an A1082 23'' monitor to a PC notebook ( a sony TXn29N)model, but it doesn't seem to work.
Setting the notebook resolution to its maximum (1366 x 768 ), I only get 3/4 of the screen filled.
This notebook uses an Intel Graphics Media Accelerator 950.
I've tried everything: New video drivers, new video frequencies, etc...
please, Help!
best regards

I have a similar issue and found WinACD a windows driver for cinema displays on source forge. It recognizes the screen now and sets the correct resolution.
However my tablet pc which has the same integrated video card does not autodetect the ACD. Very annoying when you share the ACD with a Macbook pro using a Gefen switcher. I switch to the MBP and the screen automatically works, as it should, I switch to the PC and I have to tell my tablet the screen is there.
If anyone has found a way to autodetect an ACD on a notebook PC I would be in heaven.
But do try the WinACD driver, it at least made the screen usable.

Similar Messages

  • My host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

    my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

    There are several possible causes for this problem.
    1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
    2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
    3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
    4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
    5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
    6. See also this support article.
    Rename the computer in the Sharing preference pane.

  • Problem with Xsan 2.1.1 and Mac Os server 10.5.6

    Hi,
    We have a big problem with xsan 2.1.1 and Mac Os server 10.5.6.
    - We have one server, is a Open Directory Master, and also is a metadata controller of xsan2. The Volumes of xsan2 are shares via afp, and the clients (moreless 50) connect with server via afp.
    - We have some problems, one of them is:
    odm fsm [341]: XSAN FSS 'VolDocs [0] ' : Invalid inode lookup: 0x7f80000000007e0 markers 0x0/0x0 nextiel 0x0
    This message is always in the log. We stop the volume, and start cvfsck -wv, but dont have anything, how fix it??
    - Another problem is with AFP service, suddenly the service stop, and the error is :
    mds [58] (error) Server: Mach error queueing checkin to peer manager: (ipc /send) invalid port right.
    -What of the meaning of (ipc/send) invalid port right??.
    And the last error is:
    -com.appelAppleFileServer [347] MDSChannelPeerRequest: (ipc/rcv) timed out.
    Need Help please!.

    My configuration:
    - Master Directory:
    Hardware Configuration:
    Model: Xserve
    Processor: 2x2,8 Ghz Quad-Core Intel Xeon
    Memory 8 Gb
    Disk: 70,04 Tb
    Software:
    Kernel Version: 9.6.0
    System Version: Mac OS X Server 10.5.6
    Xsan 2.1.1
    Services: AFP, DNS, Open Directory RADIUS
    Status: connected Users: 37
    This server is the open directory Master and metadata controller of xsan2, but we have another server that is open directory replica and metadata controller of xsan2. The fisrt server have too many errors with afp, the service stop and the server is dead, and you must restart via terminal with the command sudo reboot. I dont know what happen, do you help me please?

  • I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

  • Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    This is a major problem with Lollipop, but yo said it started 2 months ago.   Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again.   You might want to clear your cache before reloading.  Not sure this is your problem, but worth a try.  Good Luck

  • Problems with creation of catalogue XPGrpwise and temporary

    Problems with creation of catalogue XPGrpwise and temporary files.
    I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
    Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
    Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

    Cvetaev,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • HT4009 Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I wan

    Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?

    Contact iTunes Store Support.

  • I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

    I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • Performance Problems with MS IE 6.0 and EP 7.0 (2004s)

    Hello,
    we have a problem with ie 6.0 webbrowser and EP 7.0 (2004s). When we open for example the theme editor in the ep-system-administration site we must wait with MS ie 6.0 webbrowser ~ 18s for the site opening. With firefox 2.0 we can open the theme editor with ~ 1s.
    Have/Had anybody the same problem? - Or is this a knowing problem with ie 6.0.
    We used for the network analyse the tool: httpwatch 3.2. We can see, that the ie 6.0 must wait into the all-time of 18sec. 13sec for opening the site: emptyhover.html.
    - Thanks in advance for a tip !
    Best Regards,
    Ralf

    Hello Ameya and hello Shao,
    we use the version SP12 NW 2004s. We have the this problems with a base application of portal: theme editor.
    We can see in the httpWatch 3.2 analysis tool, that the ie 6.0 load a much of cache files from the client webbrowser. Could it be this problem? - I red in this forum problems with the webbrowser-parameter: "Empty Temporary Internet Files folder when browser is closed"
    Thank you for your helping.
    Best Regards,
    Ralf

  • I have a problem with mail.  the spelling and grammer check box before sending the messege is no longer there.  I did everything but cannot get it back.  is ther anyone who knows how to get the box with spelling and grammer checks before sending

    i have a problem with mail.  the spelling and grammer check box before sending the messege is no longer there.  I did everything but cannot get it back.  is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
    Also the mail is acting very funny by not getting the rules work in a proper method.  Is ther a software to repair mail.

    i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check. 
    This problem just started for about 3 to 4 days now.  earlier it was working normally.

  • Problem with installing Photoshop elements 9 and adobe support advisor

    Hi, I've received a graphic tablet with 2 programs: the first has been downloaded and works perfectly while the second, PSE9, has been giving me problems for at least a week!
    I downloaded it and now I have a winzip file full of strange things (one of this is set up exe which tells me that I have to install adobe support advisor) and two files which said 3DF.tmp and PSEP9(1).zip.download and if I try to click them they tell me that I have to find on the Net the program to open them because I can't. And I don't know which program is required.
    I tried a lot of times to download the adobe support advisor, I have enough space on my disc and my farewall is deactivated, but when the program begins I saw this annoyant message
    cpsid_82829s5 Missing installation file bootstrapper error occured
    with this code for a support from adobe 00-67325-032018052012
    I unistalled it and retried, but nothing.
    Please, I just want to use my tablet with the programs which are comprised in the package, why it's so difficult to download this damn photoshop elements 9????????????
    Thank you

    In the error message it doesn't tell me
    "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again,"
    neither "Installer failed to initialize. File not found. Please download Adobe Support Advisor to detect the problem."
    and I have enough space and I have Windows xp then I should be able to install it. I tried to unistall and install again the support advisor but nothing. I'm desperate.
    Messaggio originale----
    Da: [email protected]
    Data: 18/05/2012 22.20
    A: "Questionlady"<[email protected]>
    Ogg: Problem with installing Photoshop elements 9 and adobe support advisor
    Re: Problem with installing Photoshop elements 9 and adobe support advisor created by Jeff A Wright in Trial Download &amp; Install FAQ - View the full discussion
    Did you try the steps listed in http://helpx.adobe.com/creative-suite/kb/troubleshoot-error-messages-b ootstrapper-cs5.html which was identified by the Adobe Support Advisor?  If so can you please list each step and the result of those steps.  This will allow us to best advise you on your next steps.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4420419#4420419
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4420419#4420419. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Trial Download &amp; Install FAQ by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Problem with QT 7.1.5 and Sorensen codec?

    Has anyone noticed a compatibility problem with Sorensen video 3 codec and Quicktime 7.1.5? This problem did not seem to exist in prior versions (hence have been asking how to reinstall previous version but seems impossible). Some of the earlier postings discuss software that may be designed with Sorensen codec... these may be the ones not functioning properly now (video no longer works). Does this sounds plausible?
    Mac Mac OS X (10.4.8)
    Mac Mac OS X (10.4.8)
    Mac   Mac OS X (10.4.8)  

    That may be true, Jack, but Edmund said that the movie played in QuickTime Player. So his problem is most likely not a bug in QuickTime, though I can't say for certain.
    And as I said above, I have no problem playing Sorenson-encoded content on my Intel-based Mac with QuickTime 7.1.5, so more details about your content and setup (including any third-party codecs you may have installed) so that people can determine what the difference might be between the content that plays and the content that does not, or what's different in the systems, would be helpful, I'm sure.

  • I have a problem with Safari: when it opens and I go on google, it opens a page that says: PLEASE UPDATE INTERNET EXPLORERE.   What should I do?

    I have a problem with Safari: when it opens and I go on google, it opens a page that says: please update internet explorer!
    What should I do?

    It's a scam. Have a look at this thread:
    https://discussions.apple.com/thread/6058094?tstart=0

  • I'm using mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts- I didn't have any problems with it before the upgrade and in safari I don't have this problem.

    Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...

    elly903 wrote:
    Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
    Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
    http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
    It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007.  If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
    http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
    Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
                                  [click on image to enlarge]
    Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
    This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC.  Mavericks is a free download.

  • Help me please : Serious problems with collection-mapping, list-mapping and map-mappi

    Hi everybody;
    I have serious problems with list-mapping, collection-mapping and map-mapping.
    Acording to specifications and requirements in a system I am working on it is needed to
    get a "list" of values or an indivudual value.I am working with ORACLE 9i Database,
    ORACLE 9i AS and ORACLE 9i JDEVELOPER.
    I tried to map a master-detail relationship in an entity-bean, using list-mapping.
    And this was very useful in order to get a "list" of details, ...but, when I wanted
    to get a single value I have some problems with persistence, something about "saving a state"
    despite I just want to get the value of a single detail.
    I decided to change it to map-mapping and the problem related with a single detail
    worked successfully, but I can get access to the whole bunch of details.
    May anyone of you help me with that?
    I am very confused I do not know what to do.
    Have any of you a solution for that problem?
    Thank you very much.

    Have you tried a restore in iTunes?

Maybe you are looking for