Problems with 3d!Turbo
Greetings.
I have just laid my hands on an MSI FX-card, but I seem to have som problems with the software. When I first installed 3dTurbo I installed it on a fresh WXP-installation upon which I had only installed the mobo-drivers. That first time I launched it, it worked, but not since. I keep getting the same error-message.
Invallid pNvuClockInit
I press okey and the program shuts down and Mr. Gates is asking for information about the problem.
The same thing happens when I select the properties of the desktop, MSI Clock. If I push any button there my screen immediately blurrs, the coloring messed up and rectangular fields apear, like som huge pixels or something. Looks kinda like when you run a graficscard to hot. After a second the computer hangs with a messed up picture and only a hard reboot will make it answer any calls...
PhanosP: That was why I turned to you in this community. I had reinstalled the drivers, I had rebooted the puter I had even uninstalled every program I could ever imagine could interfere with the card in any concievable way and was starting to fear a hardware-error. I had forgotten one program though. After uninstalling liveupdate and installed the new version of it, it worked.
Wonkanoby: I do as well feel that 3d!turbo is a tad tacky, to say the least, but as I am not an overclocker I have no better option downloaded, nor do I realy understand how to access those advanced properties you speak of. The reason I use 3d!turbo is for temp-monitoring. If the card runs considerably hotter without its active cooling, I will need to install another papst. My goal is 20db and with time and a few dollars more I will get there:)
Thanks for your help guys!
Similar Messages
-
Weird problems with kt7 turbo (6330), PLEASE HELP!!
I just this last week purchased an older kt7 turbo (6330) to upgrade my brother's computer. I am pairing this with an Athlon XP 1700 processor. After installing all the hardware and booting up the computer, I started getting various errors. Sometimes the screen would just flash all kinds of colors, sometimes it would say something about a bios check not detecting the a: drive followed by insistent beeping, sometimes it just wouldn't start at all. After much hassle, I finally got the newest bios installed from MSI that claimed to fix some stuff between this motherboard and an Athlon XP 1700. (I didn't at the time suspect this to be the true culprit) Finally on Sunday afternoon, after a cold start, it magically started up and I finally got Windows XP installed. I found some drivers on the reference CD that seemed to help some. But now, after about 5-10 minutes, depending on the software being used, the computer will just shut itself down after a 60 second warning message. When I try reseting it, I start getting all of those weird errors again. The only way to get the computer to start up normally again is to let it sit for about 10-15 minutes to cool down, and then cold start it. At which point it will work again for another 10-15 minutes and shut down again. I am getting SOOOOO tired of these MSI motherboards not working for me!! I think MSI has a personal problem with me. PLEASE help me!! By the way, I don't think it's power related, cause I just put in a brand new P4 certified 400Watt powersupply.
Sounds like your heatsink on your CPU may not be seated correctly. Try pulling it, cleaning, reapplying compound, and reseating it.
-
Genius needs to help! problems with my video card and system
Hey guys! I'm going to post my specs first so that you get a good idea of what I'm running on:
MSI Neo2 LS 865PE.....MAT=Slow
Pentium4 2.4C.....FSB=233=2.8C hyperthreading enabled ~>1.55V
Corsair TwinX 1gig PC3700.....memory on "AUTO" in BIOS with timings at 3,4,4,8 ~> 2.7V
Radeon 9700NP.....stock speeds ~>1.7V
AlienX case with 2 fan400 watt power supply and 6 case fans
Zalman Alum/Copper heatsink fan
1:I've had this motherboard for a few months now. I upgraded my video card from a nVidia Ti4200(128meg) to a Radeon 9800 a month ago, but I couldn't get it working at 8X AGP, no matter what voltages I threw at it. I returned it for a Radeon 9700NP hoping that it would work, but it still won't.
I'm using BIOS 1.9 and since there is no option to select your AGP speed, I could only try using ATI's drivers. Once booted into Windows, there is a slider you can move to select you AGP speed. On my machine It says that It has performed some tests and has concluded that AGP 4x is the best for my system....but my system supports AGP 8X!
I've moved the slider over to 8x (which requires a reboot) at least 5 times with each card but the slider refuses to move past 4xAGP after the reboot.
2: My second problem: I had an old stick of KingMax PC3200 and decided to buy 3 more sticks. Unfortunatly, the 3 I bought did not match the one I had, so I only put 2 of the new sticks I bought into my system. Immediatly, My system would crash, lock up, files were corrupt, and I got PLENTY of blue screens of death with a long message containing: 0x0000007 with all these other numbers and "0"s. I did a search online and found out I had a hardware incompatibility problem. I never got this with my old stick of ram.
I returned the 3 sticks of Ram and replaced them with the Corsair. Put my new Radeon 9700 in, formatted my hard drive....and within 24 hours, my system locked up 3 times, rebooted itself 5 times, and gave me the same BSOD as mentioned above with the same long message.
I didn't change anything except for the memory and the video card. I've been wanting to overclock, (thats why i bought the faster memory ) but I'm not sure what to do at this point.
I have my FSB at 233 but I'm scared to go any higher because of previous system instability at stock speeds. My RAM was running on 400 and MAT=Turbo with the most relaxed timings at 3,4,4,8.
I've given myself hours of sleepless nights formatting when my system wouldnt boot into windows; overclocking....etc. I NEED HELP. PLEASE. PLEASE. Anything could work at this point.
I'm trying to get more info on how to run my system at a 5:4 ratio, also.
If anyone has problems like me or knows what could be the problem with my system, please reply to this post, it would help me a lot. I've been trying to fix these problems for a few months now so anything is greatly appreciated.Thanks a lot to you guys that responded. I brought my computer home this past holiday and I want to let you know where I stand as of now. I guess this thread is like my blog for my computer. I want to clear some things before my first post makes everyone confused.
1- I have only 2 sticks of memory in my system: the Corsair PC3700 TwinX 512x2
I returned the 3 KingMax I bought, and still keep my old stick just in case.
2- I am using the 400 watt power supply that came with the case. I read some reviews of the case and I know the reviewer did not have problems with the power supply. In my BIOS, there are some voltages it is weak on. Lets say: it it should be 5.00+, my power supply will be feeding it 4.96v or something like that, but I dont know, or think, that is a major problem...
3- My computer will refuse to boot if memory speeds are set at anything below 400. SO....if I want to use a 5:4 ratio and have to set my memory speeds to "333" in BIOS, my system refuses to boot.
4- This morning, I did manage to overclock my FSB to 250. Specs are as follow:
Memory Timing @3,4,4,8,4.....speed set at "AUTO".....MAT at "SLOW"
MY 2.4C's FSB was raised to 250 = 3.0gig
AGP/PCI frequency: 67.xx/3x.xx (cant go any lower)
CPU voltage: 1.5500
Memory voltage: 2.75
Video Card voltage: 1.7
Everything was fine for the whole day until I heard something click in my computer around midnight, and then seconds later, my computer froze and made a continuous beeeeeeeeeeeeeeeeeep. (you can imagine)
This "click" and system crash has been plaguing me for months now. I dont know whay it happens. I was just using AIM when I heard the click and my heart stopped.
My memory speeds have been set to "AUTO" even at the FSB of 250. But I don't know if this still means my system is at a 1:1 ratio. I know the BIOS then adjusts the memory to work at 500 if my FSB is 250...so I assume it is? I love 3gig, but somehow I feel that 2.8 is faster, since the FSB=233 running parallel to my memory, also at 233
A FSB of 250 is good enough for me, that's what I've been waiting 6 months for. If anyone knows how to set other ratios to achieve a FSB of 250+, please let me know, but as I said, my memory won't boot if its set at "333" -
[Solved] Problem with upgrading polkit or filesystem
Ok so first off they do "upgrade" but the problem has me worried that something is wrong.
A week or so ago after converting to systemd I tried getting rid of ConsoleKit and installing polkit 0.107 from the [testing] repo but it caused pacman to get stuck at "(1/1) upgrading polkit" So I tried that a couple of times but I could never get pacman to finish and get past that. I had to control + c to get out of that then type exit in the console (no text was visible that I typed however but typing exit + enter worked for closing it). So I then opened a new terminal and downgraded polkit back to 0.105 and waited for polkit to get pushed from testing to see if it would fix my issue. Fast forward to today and I go to upgrade my system. Among the 83 updates or so was polkit and filesystem. What do you know it gets stuck at "(15/83) upgrading polkit". Fuck so I control + c, open new terminal and then do the upgrade again and it continues to update but this time it gets stuck doing the same thing for filesystem. I control + c, open new terminal and continue the upgrade until it finishes, which it does this time, and I reboot.
I tried re-installing polkit again and filesystem again but they continue to get stuck. I cannot "complete" the upgrade even though they show the appropriate version when I check.
Terminal
[507] shauder@arch-desktop [~] $ sudo pacman -S polkit
warning: polkit-0.107-4 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): polkit-0.107-4
Total Installed Size: 1.77 MiB
Net Upgrade Size: 0.00 MiB
Proceed with installation? [Y/n]
(1/1) checking package integrity [########################################################] 100%
(1/1) loading package files [########################################################] 100%
(1/1) checking for file conflicts [########################################################] 100%
(1/1) checking available disk space [########################################################] 100%
(1/1) upgrading polkit
/var/log/pacman.log
[2012-07-18 18:27] installed filesystem (2012.6-4)
[2012-07-18 18:27] installed findutils (4.4.2-4)
[2012-07-18 18:27] installed gawk (4.0.1-1)
[2012-07-18 18:27] installed gettext (0.18.1.1-4)
[2012-07-18 18:27] installed grep (2.13-2)
[2012-07-18 18:27] installed sed (4.2.1-4)
[2012-07-18 18:27] installed grub (0.97-21)
[2012-07-18 18:27] installed gzip (1.5-1)
[2012-07-18 18:27] installed gdbm (1.10-1)
[2012-07-18 18:27] installed perl (5.16.0-2)
[2012-07-18 18:27] installed openssl (1.0.1.c-1)
[2012-07-18 18:27] installed libsasl (2.1.23-9)
[2012-07-18 18:27] installed libldap (2.4.31-4)
[2012-07-18 18:27] installed keyutils (1.5.5-3)
[2012-07-18 18:27] installed krb5 (1.10.2-2)
[2012-07-18 18:27] installed heirloom-mailx (12.5-3)
[2012-07-18 18:27] installed inetutils (1.9.1-2)
[2012-07-18 18:27] installed iproute2 (3.4.0-2)
[2012-07-18 18:27] installed sysvinit (2.88-6)
[2012-07-18 18:27] installed initscripts (2012.06.3-2)
[2012-07-18 18:27] installed sysfsutils (2.1.0-8)
[2012-07-18 18:27] >> Traceroute is now provided by core/traceroute
[2012-07-18 18:27] installed iputils (20101006-4)
[2012-07-18 18:27] installed jfsutils (1.1.15-3)
[2012-07-18 18:27] installed less (444-3)
[2012-07-18 18:27] installed licenses (2.9-1)
[2012-07-18 18:27] installed linux-firmware (20120625-1)
[2012-07-18 18:27] installed mkinitcpio-busybox (1.20.1-1)
[2012-07-18 18:27] installed expat (2.1.0-1)
[2012-07-18 18:27] installed libarchive (3.0.4-1)
[2012-07-18 18:27] installed mkinitcpio (0.9.2-2)
[2012-07-18 18:27] >>> Updating module dependencies. Please wait ...
[2012-07-18 18:27] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-07-18 18:27] ==> Building image from preset: 'default'
[2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
[2012-07-18 18:27] -> Running build hook: [base]
[2012-07-18 18:27] -> Running build hook: [udev]
[2012-07-18 18:27] -> Running build hook: [autodetect]
[2012-07-18 18:27] -> Running build hook: [pata]
[2012-07-18 18:27] -> Running build hook: [scsi]
[2012-07-18 18:27] -> Running build hook: [sata]
[2012-07-18 18:27] -> Running build hook: [filesystems]
[2012-07-18 18:27] -> Running build hook: [usbinput]
[2012-07-18 18:27] -> Running build hook: [fsck]
[2012-07-18 18:27] ==> Generating module dependencies
[2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-07-18 18:27] bsdcpio: Failed to set default locale
[2012-07-18 18:27] ==> Image generation successful
[2012-07-18 18:27] ==> Building image from preset: 'fallback'
[2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
[2012-07-18 18:27] -> Running build hook: [base]
[2012-07-18 18:27] -> Running build hook: [udev]
[2012-07-18 18:27] -> Running build hook: [pata]
[2012-07-18 18:27] -> Running build hook: [scsi]
[2012-07-18 18:27] -> Running build hook: [sata]
[2012-07-18 18:27] -> Running build hook: [filesystems]
[2012-07-18 18:27] -> Running build hook: [usbinput]
[2012-07-18 18:27] -> Running build hook: [fsck]
[2012-07-18 18:27] ==> Generating module dependencies
[2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-07-18 18:27] bsdcpio: Failed to set default locale
[2012-07-18 18:27] ==> Image generation successful
[2012-07-18 18:27] installed linux (3.4.5-1)
[2012-07-18 18:27] installed logrotate (3.8.1-2)
[2012-07-18 18:27] installed lvm2 (2.02.96-3)
[2012-07-18 18:27] installed texinfo (4.13a-7)
[2012-07-18 18:27] installed groff (1.21-2)
[2012-07-18 18:27] installed libpipeline (1.2.1-1)
[2012-07-18 18:27] it's recommended to create an initial
[2012-07-18 18:27] database running as root:
[2012-07-18 18:27] "/usr/bin/mandb --quiet"
[2012-07-18 18:27] installed man-db (2.6.2-1)
[2012-07-18 18:27] installed man-pages (3.41-1)
[2012-07-18 18:27] installed mdadm (3.2.5-2)
[2012-07-18 18:27] installed nano (2.2.6-2)
[2012-07-18 18:27] installed ca-certificates (20120623-1)
[2012-07-18 18:27] installed libssh2 (1.4.2-1)
[2012-07-18 18:27] installed curl (7.26.0-1)
[2012-07-18 18:27] installed pth (2.0.7-4)
[2012-07-18 18:27] installed libksba (1.2.0-2)
[2012-07-18 18:27] installed libassuan (2.0.3-1)
[2012-07-18 18:27] installed pinentry (0.8.1-4)
[2012-07-18 18:27] installed dirmngr (1.1.0-4)
[2012-07-18 18:27] installed gnupg (2.0.19-2)
[2012-07-18 18:27] installed gpgme (1.3.1-4)
[2012-07-18 18:27] installed pacman-mirrorlist (20120626-1)
[2012-07-18 18:27] installed archlinux-keyring (20120622-1)
[2012-07-18 18:27] >>> Run `pacman-key --init; pacman-key --populate archlinux`
[2012-07-18 18:27] >>> to import the data required by pacman for package verification.
[2012-07-18 18:27] >>> See: https://www.archlinux.org/news/having-pacman-verify-packages
[2012-07-18 18:27] installed pacman (4.0.3-3)
[2012-07-18 18:27] installed pciutils (3.1.10-1)
[2012-07-18 18:27] installed pcmciautils (018-4)
[2012-07-18 18:27] installed libnl (3.2.11-1)
[2012-07-18 18:27] installed libusbx (1.0.12-2)
[2012-07-18 18:27] installed libpcap (1.3.0-1)
[2012-07-18 18:27] installed ppp (2.4.5-3)
[2012-07-18 18:27] installed procps-ng (3.3.3-3)
[2012-07-18 18:27] installed psmisc (22.19-1)
[2012-07-18 18:27] installed reiserfsprogs (3.6.21-4)
[2012-07-18 18:27] installed shadow (4.1.5.1-1)
[2012-07-18 18:27] installed eventlog (0.2.12-3)
[2012-07-18 18:27] installed syslog-ng (3.3.5-2)
[2012-07-18 18:27] installed tar (1.26-2)
[2012-07-18 18:27] installed usbutils (006-1)
[2012-07-18 18:27] installed vi (1:050325-2)
[2012-07-18 18:27] installed wget (1.13.4-1)
[2012-07-18 18:27] installed which (2.20-5)
[2012-07-18 18:27] installed dbus-core (1.6.2-2)
[2012-07-18 18:27] installed wpa_supplicant (1.0-1)
[2012-07-18 18:27] installed xfsprogs (3.1.8-2)
[2012-07-18 18:27] installed m4 (1.4.16-2)
[2012-07-18 18:27] installed autoconf (2.69-1)
[2012-07-18 18:27] installed automake (1.12.2-1)
[2012-07-18 18:27] installed binutils (2.22-9)
[2012-07-18 18:27] installed bison (2.5.1-1)
[2012-07-18 18:27] installed fakeroot (1.18.4-1)
[2012-07-18 18:27] installed flex (2.5.35-5)
[2012-07-18 18:27] installed mpfr (3.1.1-1)
[2012-07-18 18:27] installed libmpc (0.9-2)
[2012-07-18 18:27] installed isl (0.10-1)
[2012-07-18 18:27] installed cloog (0.17.0-2)
[2012-07-18 18:27] installed ppl (1.0-1)
[2012-07-18 18:27] installed gcc (4.7.1-4)
[2012-07-18 18:27] installed libltdl (2.4.2-6)
[2012-07-18 18:27] installed libtool (2.4.2-6)
[2012-07-18 18:27] installed make (3.82-4)
[2012-07-18 18:27] installed patch (2.6.1-3)
[2012-07-18 18:27] installed pkg-config (0.27-1)
[2012-07-18 18:37] Running 'pacman -Syy'
[2012-07-18 18:37] synchronizing package lists
[2012-07-18 18:38] Running 'pacman -Syy'
[2012-07-18 18:38] synchronizing package lists
[2012-07-18 18:39] Running 'pacman -S sudo'
[2012-07-18 18:43] Running 'pacman -S sudo'
[2012-07-18 18:44] Running 'pacman -S sudo'
[2012-07-18 18:44] installed sudo (1.8.5.p2-1)
[2012-07-18 18:45] Running 'pacman -S alsa-utils'
[2012-07-18 18:46] installed alsa-lib (1.0.25-1)
[2012-07-18 18:46] installed dialog (1.1_20120706-1)
[2012-07-18 18:46] installed libogg (1.3.0-1)
[2012-07-18 18:46] installed flac (1.2.1-3)
[2012-07-18 18:46] installed libvorbis (1.3.3-1)
[2012-07-18 18:46] installed libsndfile (1.0.25-2)
[2012-07-18 18:46] installed libsamplerate (0.1.8-1)
[2012-07-18 18:46] installed alsa-utils (1.0.25-3)
[2012-07-18 18:46] Running 'pacman -S alsa-plugins'
[2012-07-18 18:46] installed alsa-plugins (1.0.25-2)
[2012-07-18 18:48] Running 'pacman -S xorg-server xorg-xinit xorg-server-utils'
[2012-07-18 18:48] installed xproto (7.0.23-1)
[2012-07-18 18:48] installed libxdmcp (1.1.1-1)
[2012-07-18 18:48] installed freetype2 (2.4.10-1)
[2012-07-18 18:48] installed libfontenc (1.1.1-1)
[2012-07-18 18:48] installed fontsproto (2.1.2-1)
[2012-07-18 18:48] installed libxfont (1.4.5-1)
[2012-07-18 18:48] installed libpciaccess (0.13.1-1)
[2012-07-18 18:48] installed libdrm (2.4.37-1)
[2012-07-18 18:48] installed pixman (0.26.2-1)
[2012-07-18 18:48] installed libxau (1.0.7-1)
[2012-07-18 18:48] installed xcb-proto (1.7.1-1)
[2012-07-18 18:48] installed libxcb (1.8.1-1)
[2012-07-18 18:48] installed kbproto (1.0.6-1)
[2012-07-18 18:48] installed libx11 (1.5.0-1)
[2012-07-18 18:48] installed libxkbfile (1.0.8-1)
[2012-07-18 18:48] installed xorg-xkbcomp (1.2.4-1)
[2012-07-18 18:48] installed xkeyboard-config (2.6-1)
[2012-07-18 18:48] installed xorg-setxkbmap (1.3.0-1)
[2012-07-18 18:48] installed xorg-fonts-encodings (1.0.4-3)
[2012-07-18 18:48] installed xorg-fonts-alias (1.0.2-2)
[2012-07-18 18:48] installed xorg-bdftopcf (1.0.3-2)
[2012-07-18 18:48] installed xorg-mkfontscale (1.1.0-1)
[2012-07-18 18:48] installed xorg-mkfontdir (1.0.7-1)
[2012-07-18 18:48] installed xorg-font-util (1.3.0-1)
[2012-07-18 18:48] installed xorg-font-utils (7.6-3)
[2012-07-18 18:48] updating font cache... done.
[2012-07-18 18:48] installed fontconfig (2.8.0-2)
[2012-07-18 18:49] Updating font cache... done.
[2012-07-18 18:49] installed xorg-fonts-misc (1.0.1-2)
[2012-07-18 18:49] installed xorg-server-common (1.12.3-1)
[2012-07-18 18:49] installed xf86-input-evdev (2.7.0-2)
[2012-07-18 18:49] installed xorg-server (1.12.3-1)
[2012-07-18 18:49] installed xextproto (7.2.1-1)
[2012-07-18 18:49] installed libxext (1.3.1-1)
[2012-07-18 18:49] installed libice (1.0.8-1)
[2012-07-18 18:49] installed libsm (1.2.1-1)
[2012-07-18 18:49] installed libxt (1.1.3-1)
[2012-07-18 18:49] installed libxmu (1.1.1-1)
[2012-07-18 18:49] installed xorg-xauth (1.0.7-1)
[2012-07-18 18:49] installed xorg-xinit (1.3.2-1)
[2012-07-18 18:49] installed xorg-iceauth (1.0.5-1)
[2012-07-18 18:49] installed xorg-sessreg (1.0.7-1)
[2012-07-18 18:49] installed xorg-xcmsdb (1.0.4-1)
[2012-07-18 18:49] installed renderproto (0.11.1-2)
[2012-07-18 18:49] installed libxrender (0.9.7-1)
[2012-07-18 18:49] installed randrproto (1.3.2-2)
[2012-07-18 18:49] installed libxrandr (1.3.2-2)
[2012-07-18 18:49] installed xorg-xbacklight (1.1.2-3)
[2012-07-18 18:49] installed xf86vidmodeproto (2.3.1-2)
[2012-07-18 18:49] installed libxxf86vm (1.1.2-1)
[2012-07-18 18:49] installed xorg-xgamma (1.0.5-1)
[2012-07-18 18:49] installed xorg-xhost (1.0.5-1)
[2012-07-18 18:49] installed xorg-xrandr (1.3.5-1)
[2012-07-18 18:49] installed inputproto (2.2-1)
[2012-07-18 18:49] installed libxi (1.6.1-1)
[2012-07-18 18:49] installed xineramaproto (1.2.1-2)
[2012-07-18 18:49] installed libxinerama (1.1.2-1)
[2012-07-18 18:49] installed xorg-xinput (1.6.0-1)
[2012-07-18 18:49] installed xorg-xmodmap (1.0.7-1)
[2012-07-18 18:49] installed mcpp (2.7.2-4)
[2012-07-18 18:49] installed xorg-xrdb (1.0.9-2)
[2012-07-18 18:49] installed xorg-xrefresh (1.0.4-3)
[2012-07-18 18:49] installed xorg-xset (1.2.2-1)
[2012-07-18 18:49] installed fixesproto (5.0-2)
[2012-07-18 18:49] installed libxfixes (5.0-2)
[2012-07-18 18:49] installed libxcursor (1.1.13-1)
[2012-07-18 18:49] installed xorg-xsetroot (1.1.0-3)
[2012-07-18 18:49] installed xorg-server-utils (7.6-3)
[2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils'
[2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils lib32-nvidia-utils'
[2012-07-18 18:51] installed videoproto (2.3.1-2)
[2012-07-18 18:51] installed libxv (1.0.7-1)
[2012-07-18 18:51] installed libxvmc (1.0.7-1)
[2012-07-18 18:51] installed nvidia-utils (302.17-1)
[2012-07-18 18:51] In order to use nvidia module, reboot the system.
[2012-07-18 18:51] installed nvidia (302.17-3)
[2012-07-18 18:51] installed lib32-glibc (2.16.0-2)
[2012-07-18 18:51] installed lib32-libxdmcp (1.1.1-1)
[2012-07-18 18:51] installed lib32-libxau (1.0.7-1)
[2012-07-18 18:51] installed lib32-libxcb (1.8.1-2)
[2012-07-18 18:51] installed lib32-libx11 (1.5.0-1)
[2012-07-18 18:51] installed lib32-libxext (1.3.1-1)
[2012-07-18 18:51] installed lib32-libxv (1.0.7-1)
[2012-07-18 18:51] installed lib32-libxvmc (1.0.7-1)
[2012-07-18 18:51] installed lib32-zlib (1.2.7-1)
[2012-07-18 18:51] installed lib32-gcc-libs (4.7.1-4.1)
[2012-07-18 18:51] installed lib32-nvidia-utils (302.17-1)
[2012-07-18 18:55] Running 'pacman -S xorg-twm xorg-xclock xterm'
[2012-07-18 18:55] installed xorg-twm (1.0.7-1)
[2012-07-18 18:55] installed libxpm (3.5.10-1)
[2012-07-18 18:55] installed libxaw (1.0.11-1)
[2012-07-18 18:55] installed libxft (2.3.1-1)
[2012-07-18 18:55] installed xorg-xclock (1.0.6-1)
[2012-07-18 18:55] installed xorg-luit (1.1.1-1)
[2012-07-18 18:55] installed xbitmaps (1.1.1-2)
[2012-07-18 18:55] installed xterm (281-1)
[2012-07-18 18:55] Running 'pacman -S dbus'
[2012-07-18 18:55] installed dbus (1.6.2-1)
[2012-07-18 18:56] Running 'pacman -S ttf-dejavu'
[2012-07-18 18:56] installed ttf-dejavu (2.33-3)
[2012-07-18 18:57] Running 'pacman -S awesome'
[2012-07-18 18:57] installed libpng (1.5.11-1)
[2012-07-18 18:57] installed cairo (1.12.2-2)
[2012-07-18 18:57] installed libjpeg-turbo (1.2.1-1)
[2012-07-18 18:57] installed libtiff (4.0.2-1)
[2012-07-18 18:57] installed giflib (4.1.6-5)
[2012-07-18 18:57] installed libid3tag (0.15.1b-7)
[2012-07-18 18:57] installed imlib2 (1.4.5-2)
[2012-07-18 18:57] installed libev (4.11-1)
[2012-07-18 18:57] installed libxdg-basedir (1.2.0-1)
[2012-07-18 18:57] installed lua (5.1.5-2)
[2012-07-18 18:57] installed libdatrie (0.2.5-1)
[2012-07-18 18:57] installed libthai (0.1.17-1)
[2012-07-18 18:57] installed pango (1.30.1-1)
[2012-07-18 18:57] installed xcb-util (0.3.9-1)
[2012-07-18 18:57] installed startup-notification (0.12-3)
[2012-07-18 18:57] installed xcb-util-image (0.3.9-1)
[2012-07-18 18:57] installed xcb-util-keysyms (0.3.9-1)
[2012-07-18 18:57] installed xcb-util-wm (0.3.9-1)
[2012-07-18 18:57] installed xorg-xmessage (1.0.3-2)
[2012-07-18 18:57] installed awesome (3.4.13-1)
[2012-07-18 18:58] Running 'pacman -S rlwrap feh'
[2012-07-18 18:58] installed rlwrap (0.37-2)
[2012-07-18 18:58] installed giblib (1.2.4-5)
[2012-07-18 18:58] installed libexif (0.6.20-2)
[2012-07-18 18:58] installed feh (2.5-1)
[2012-07-18 18:59] Running 'pacman -S packer'
[2012-07-18 18:59] Running 'pacman -S lightdm'
[2012-07-18 19:01] Running 'pacman -S fakeroot'
[2012-07-18 19:01] upgraded fakeroot (1.18.4-1 -> 1.18.4-1)
[2012-07-18 19:08] Running 'pacman -S git'
[2012-07-18 19:08] installed perl-error (0.17018-1)
[2012-07-18 19:08] installed git (1.7.11.2-1)
[2012-07-18 19:08] Running 'pacman -S jshon'
[2012-07-18 19:08] installed jansson (2.3-1)
[2012-07-18 19:08] installed jshon (20111222-1)
[2012-07-18 19:08] Running 'pacman -U packer-20120718-1-any.pkg.tar.xz'
[2012-07-18 19:08] installed packer (20120718-1)
[2012-07-18 19:10] Running 'pacman --noconfirm --asdeps -S -- accountsservice dbus-glib gobject-introspection intltool itstool libxklavier'
[2012-07-18 19:10] installed polkit (0.105-1)
[2012-07-18 19:10] installed accountsservice (0.6.22-1)
[2012-07-18 19:10] installed dbus-glib (0.100-1)
[2012-07-18 19:10] installed sqlite (3.7.13-1)
[2012-07-18 19:10] installed python2 (2.7.3-2)
[2012-07-18 19:10] installed gobject-introspection (1.32.1-2)
[2012-07-18 19:10] installed perl-xml-parser (2.41-3)
[2012-07-18 19:10] installed intltool (0.50.2-1)
[2012-07-18 19:10] installed libxml2 (2.7.8-2)
[2012-07-18 19:10] installed itstool (1.1.2-1)
[2012-07-18 19:10] installed iso-codes (3.34-1)
[2012-07-18 19:10] installed libxklavier (5.2.1-2)
[2012-07-18 19:13] Running 'pacman -U lightdm-1.3.1-4-x86_64.pkg.tar.xz'
[2012-07-18 19:14] You need to install lightdm-gtk-greeter to run the default and most stable greeter
[2012-07-18 19:14] installed lightdm (1.3.1-4)
[2012-07-18 19:14] Running 'pacman --noconfirm --asdeps -S -- archlinux-wallpaper bzr gnome-common gnome-doc-utils gtk-doc gtk-engines libwebkit vala'
[2012-07-18 19:15] ==> Wallpapers have been installed to /usr/share/archlinux/wallpaper
[2012-07-18 19:15] installed archlinux-wallpaper (1.4-1)
[2012-07-18 19:15] installed bzr (2.5.1-1)
[2012-07-18 19:15] installed gnome-common (3.4.0.1-2)
[2012-07-18 19:15] installed libxslt (1.1.26-3)
[2012-07-18 19:15] installed docbook-xml (4.5-5)
[2012-07-18 19:15] installed rarian (0.8.1-2)
[2012-07-18 19:15] installed gnome-doc-utils (0.20.10-1)
[2012-07-18 19:15] installed docbook-xsl (1.77.1-2)
[2012-07-18 19:15] installed gtk-doc (1.18-1)
[2012-07-18 19:15] installed atk (2.4.0-1)
[2012-07-18 19:15] installed compositeproto (0.4.2-2)
[2012-07-18 19:15] installed libxcomposite (0.4.3-2)
[2012-07-18 19:15] installed damageproto (1.2.1-2)
[2012-07-18 19:15] installed libxdamage (1.1.3-2)
[2012-07-18 19:15] installed shared-mime-info (1.0-1)
[2012-07-18 19:15] installed libtasn1 (2.13-1)
[2012-07-18 19:15] installed nettle (2.5-1)
[2012-07-18 19:15] installed p11-kit (0.12-1)
[2012-07-18 19:15] installed gnutls (3.0.21-1)
[2012-07-18 19:15] installed libdaemon (0.14-2)
[2012-07-18 19:15] ==> The following daemons may be added to DAEMONS in /etc/rc.conf:
[2012-07-18 19:15] ==> avahi-daemon: the mdns responder, you probably want this.
[2012-07-18 19:15] ==> dbus needs to be running when you start it.
[2012-07-18 19:15] ==> avahi-dnsconfd: daemon used for peer-to-peer automatic dns
[2012-07-18 19:15] ==> configuration on dhcp-less networks.
[2012-07-18 19:15]
[2012-07-18 19:15] ==> To use some of the client applications you will have to install python.
[2012-07-18 19:15] ==> In addition, pygtk is required for the graphical ones and
[2012-07-18 19:15] ==> twisted for avahi-bookmarks.
[2012-07-18 19:15] installed avahi (0.6.31-3)
[2012-07-18 19:15] installed libcups (1.5.3-5)
[2012-07-18 19:15] installed gdk-pixbuf2 (2.26.1-1)
[2012-07-18 19:15] installed gtk-update-icon-cache (2.24.10-3)
[2012-07-18 19:15] installed gtk2 (2.24.10-3)
[2012-07-18 19:15] installed gtk-engines (2.21.0-1)
[2012-07-18 19:15] installed icu (49.1.2-1)
[2012-07-18 19:15] installed gstreamer0.10 (0.10.36-1)
[2012-07-18 19:15] installed orc (0.4.16-1)
[2012-07-18 19:15] installed gstreamer0.10-base (0.10.36-1)
[2012-07-18 19:15] installed libproxy (0.4.7-2)
[2012-07-18 19:15] installed gsettings-desktop-schemas (3.4.2-1)
[2012-07-18 19:15] installed glib-networking (2.32.3-1)
[2012-07-18 19:15] installed libsoup (2.38.1-1)
[2012-07-18 19:15] ==> aspell comes with no default dictionary
[2012-07-18 19:15] installed aspell (0.60.6.1-1)
[2012-07-18 19:15] installed hunspell (1.3.2-1)
[2012-07-18 19:15] installed hspell (1.1-2)
[2012-07-18 19:15] installed enchant (1.6.0-4)
[2012-07-18 19:15] installed geoclue (0.12.0-5)
[2012-07-18 19:15] installed libwebkit (1.8.1-1)
[2012-07-18 19:15] installed vala (0.16.1-1)
[2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-bzr-13-3-x86_64.pkg.tar.xz'
[2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-0.1.2-3-x86_64.pkg.tar.xz'
[2012-07-18 19:16] installed lightdm-webkit-greeter (0.1.2-3)
[2012-07-18 19:47] Running 'pacman -R lightdm'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice dbus-glib libxklavier'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice enchant geoclue dbus-glib libxklavier'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkite enchant geoclue dbus-glib libxklavier'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkit enchant geoclue dbus-glib libxklavier'
[2012-07-18 19:49] removed lightdm-webkit-greeter (0.1.2-3)
[2012-07-18 19:49] removed libwebkit (1.8.1-1)
[2012-07-18 19:49] removed geoclue (0.12.0-5)
[2012-07-18 19:49] removed enchant (1.6.0-4)
[2012-07-18 19:49] userdel: user lightdm is currently used by process 657
[2012-07-18 19:49] groupdel: cannot remove the primary group of user 'lightdm'
[2012-07-18 19:49] removed lightdm (1.3.1-4)
[2012-07-18 19:49] removed libxklavier (5.2.1-2)
[2012-07-18 19:49] removed dbus-glib (0.100-1)
[2012-07-18 19:49] removed accountsservice (0.6.22-1)
[2012-07-18 19:50] Running 'pacman -S chromium'
[2012-07-18 19:50] installed dbus-glib (0.100-1)
[2012-07-18 19:50] installed nspr (4.9.1-1)
[2012-07-18 19:50] installed nss (3.13.5-1)
[2012-07-18 19:50] installed xdg-utils (1.1.0-2.20120520)
[2012-07-18 19:50] installed libevent (2.0.19-1)
[2012-07-18 19:50] installed scrnsaverproto (1.2.2-1)
[2012-07-18 19:50] installed libxss (1.2.2-1)
[2012-07-18 19:50] installed desktop-file-utils (0.20-1)
[2012-07-18 19:50] installed hicolor-icon-theme (0.12-2)
[2012-07-18 19:50] installed chromium (20.0.1132.57-1)
[2012-07-18 19:50] Running 'pacman -Sy abs'
[2012-07-18 19:50] synchronizing package lists
[2012-07-18 19:51] installed rsync (3.0.9-3)
[2012-07-18 19:51] installed abs (2.4.3-2)
[2012-07-18 19:52] Running 'pacman -S openjdk6 perl git gnupg flex bison gperf zip unzip wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline'
[2012-07-18 19:53] installed ca-certificates-java (20120608-1)
[2012-07-18 19:53] installed recordproto (1.14.2-1)
[2012-07-18 19:53] installed libxtst (1.2.1-1)
[2012-07-18 19:53] upgraded zlib (1.2.7-1 -> 1.2.7-1)
[2012-07-18 19:53] upgraded libpng (1.5.11-1 -> 1.5.11-1)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem (No such file or directory)
[2012-07-18 19:53] done.
[2012-07-18 19:53] when you use a non-reparenting window manager
[2012-07-18 19:53] set _JAVA_AWT_WM_NONREPARENTING=1 in
[2012-07-18 19:53] /etc/profile.d/openjdk6.sh
[2012-07-18 19:53] installed openjdk6 (6.b24_1.11.3-1)
[2012-07-18 19:53] upgraded perl (5.16.0-2 -> 5.16.0-2)
[2012-07-18 19:53] upgraded git (1.7.11.2-1 -> 1.7.11.2-1)
[2012-07-18 19:53] upgraded ncurses (5.9-3 -> 5.9-3)
[2012-07-18 19:53] upgraded readline (6.2.003-2 -> 6.2.003-2)
[2012-07-18 19:53] upgraded gnupg (2.0.19-2 -> 2.0.19-2)
[2012-07-18 19:53] upgraded flex (2.5.35-5 -> 2.5.35-5)
[2012-07-18 19:53] upgraded bison (2.5.1-1 -> 2.5.1-1)
[2012-07-18 19:53] installed gperf (3.0.4-4)
[2012-07-18 19:53] installed zip (3.0-3)
[2012-07-18 19:53] installed unzip (6.0-6)
[2012-07-18 19:53] installed wxgtk (2.8.12.1-3)
[2012-07-18 19:53] installed lzo2 (2.06-1)
[2012-07-18 19:53] installed squashfs-tools (4.2-2)
[2012-07-18 19:53] upgraded libusbx (1.0.12-2 -> 1.0.12-2)
[2012-07-18 19:53] installed libusb-compat (0.1.4-2)
[2012-07-18 19:53] Running 'pacman -S -- esdl schedtool'
[2012-07-18 19:54] installed erlang (R15B01-1)
[2012-07-18 19:54] installed sdl (1.2.15-1)
[2012-07-18 19:54] installed dri2proto (2.6-1)
[2012-07-18 19:54] installed glproto (1.4.15-1)
[2012-07-18 19:54] installed mesa (8.0.4-1)
[2012-07-18 19:54] installed esdl (2:1.2-1)
[2012-07-18 19:54] installed schedtool (1.3.0-2)
[2012-07-18 19:55] Running 'pacman -U pngcrush-1.7.31-1-x86_64.pkg.tar.xz'
[2012-07-18 19:55] installed pngcrush (1.7.31-1)
[2012-07-18 19:55] Running 'pacman -U repo-1.17-1-x86_64.pkg.tar.xz'
[2012-07-18 19:55] installed repo (1.17-1)
[2012-07-18 19:59] Running 'pacman -S terminator'
[2012-07-18 19:59] installed vte-common (0.32.2-1)
[2012-07-18 19:59] installed vte (0.28.2-3)
[2012-07-18 19:59] installed libglade (2.6.4-3)
[2012-07-18 19:59] installed python2-cairo (1.10.0-1)
[2012-07-18 19:59] installed pygobject2-devel (2.28.6-6)
[2012-07-18 19:59] installed python2-gobject2 (2.28.6-6)
[2012-07-18 19:59] installed pygtk (2.24.0-3)
[2012-07-18 19:59] installed terminator (0.96-1)
[2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
[2012-07-18 20:00] synchronizing package lists
[2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
[2012-07-18 20:00] synchronizing package lists
[2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
[2012-07-18 20:00] synchronizing package lists
[2012-07-18 20:01] removed gcc-libs (4.7.1-4)
[2012-07-18 20:01] removed binutils (2.22-9)
[2012-07-18 20:01] removed gcc (4.7.1-4)
[2012-07-18 20:01] removed libtool (2.4.2-6)
[2012-07-18 20:01] installed gcc-libs-multilib (4.7.1-4.1)
[2012-07-18 20:01] installed binutils-multilib (2.22-8)
[2012-07-18 20:01] installed gcc-multilib (4.7.1-4.1)
[2012-07-18 20:01] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
[2012-07-18 20:01] installed lib32-libltdl (2.4.2-6)
[2012-07-18 20:01] installed libtool-multilib (2.4.2-6)
[2012-07-18 20:01] installed lib32-ncurses (5.9-1)
[2012-07-18 20:01] installed lib32-readline (6.2.003-1)
[2012-07-18 20:01] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
[2012-07-18 20:07] Running 'pacman -S ssh'
[2012-07-18 20:10] Running 'pacman -S ssh-keygen'
[2012-07-18 20:10] Running 'pacman -S openssh'
[2012-07-18 20:10] installed libedit (20120311_3.0-1)
[2012-07-18 20:10] installed dnssec-anchors (20120422-1)
[2012-07-18 20:10] installed ldns (1.6.13-1)
[2012-07-18 20:10] installed openssh (6.0p1-3)
[2012-07-18 20:11] Running 'pacman -S pbcopy'
[2012-07-18 20:11] Running 'pacman -S copy'
[2012-07-18 20:13] Running 'pacman -S gedit'
[2012-07-18 20:13] installed lcms2 (2.3-2)
[2012-07-18 20:13] installed libgusb (0.1.3-1)
[2012-07-18 20:13] installed gd (2.0.36RC1-5)
[2012-07-18 20:13] installed libgphoto2 (2.4.14-1)
[2012-07-18 20:13] installed libieee1284 (0.2.11-4)
[2012-07-18 20:13] installed v4l-utils (0.8.8-1)
[2012-07-18 20:13] installed net-snmp (5.7.1-3)
[2012-07-18 20:13] NOTE
[2012-07-18 20:13] ----
[2012-07-18 20:13] Add your user to group 'scanner' to use scanner devices.
[2012-07-18 20:13] installed sane (1.0.22-9)
[2012-07-18 20:13] installed shared-color-profiles (0.1.5-1)
[2012-07-18 20:13] installed colord (0.1.21-2)
[2012-07-18 20:13] installed gtk3 (3.4.3-1)
[2012-07-18 20:13] installed gtksourceview3 (3.4.2-1)
[2012-07-18 20:13] installed libpeas (1.4.0-2)
[2012-07-18 20:13] installed enchant (1.6.0-4)
[2012-07-18 20:13] installed pygobject-devel (3.2.2-1)
[2012-07-18 20:13] installed python2-gobject (3.2.2-1)
[2012-07-18 20:13] installed dconf (0.12.1-2)
[2012-07-18 20:13] installed gedit (3.4.2-1)
[2012-07-18 20:15] Running 'pacman -S python'
[2012-07-18 20:16] installed python (3.2.3-3)
[2012-07-18 20:26] Running 'pacman -S xclip'
[2012-07-18 20:26] installed xclip (0.12-3)
[2012-07-18 20:37] Running 'pacman --noconfirm --asdeps -S -- lib32-alsa-lib lib32-libstdc++5 lib32-openal lib32-sdl swt'
[2012-07-18 20:37] installed lib32-alsa-lib (1.0.25-1)
[2012-07-18 20:37] installed lib32-libstdc++5 (3.3.6-6)
[2012-07-18 20:37] installed openal (1.14-1)
[2012-07-18 20:37] installed lib32-openal (1.14-1)
[2012-07-18 20:37] installed lib32-libxrender (0.9.7-1)
[2012-07-18 20:37] installed lib32-sdl (1.2.15-2)
[2012-07-18 20:37] installed swt (3.7.2-1)
[2012-07-18 20:45] Running 'pacman --asdeps -U android-sdk-r20-2-x86_64.pkg.tar.xz'
[2012-07-18 20:50] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
[2012-07-18 20:50] The android group has been removed, install android packages as root.
[2012-07-18 20:50] installed android-sdk (r20-2)
[2012-07-18 20:51] Running 'pacman -U android-sdk-r20-2-x86_64.pkg.tar.xz'
[2012-07-18 20:54] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
[2012-07-18 20:54] The android group has been removed, install android packages as root.
[2012-07-18 20:54] upgraded android-sdk (r20-2 -> r20-2)
[2012-07-18 20:59] Running 'pacman -U android-sdk-platform-tools-r12-1-any.pkg.tar.xz'
[2012-07-18 20:59] installed android-sdk-platform-tools (r12-1)
[2012-07-18 21:10] Running 'pacman -S perl-switch'
[2012-07-18 21:10] installed perl-switch (2.16-1)
[2012-07-21 03:29] Running 'pacman -S flashplugin'
[2012-07-21 03:29] relogin or source /etc/profile.d/mozilla-common.sh
[2012-07-21 03:29] installed mozilla-common (1.4-3)
[2012-07-21 03:29] >>
[2012-07-21 03:29] >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
[2012-07-21 03:29] >> uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.
[2012-07-21 03:29] >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
[2012-07-21 03:29] >>
[2012-07-21 03:29] installed flashplugin (11.2.202.236-1)
[2012-07-21 03:32] Running 'pacman -S libvdpau'
[2012-07-21 03:32] installed libvdpau (0.4.1-2)
[2012-07-21 14:53] Running 'pacman -S gedit-common'
[2012-07-21 14:55] Running 'pacman -S gtk-theme-switch2'
[2012-07-21 14:56] installed gtk-theme-switch2 (2.1.0-2)
[2012-07-21 15:00] Running 'pacman -S gtk-icons'
[2012-07-21 15:04] Running 'pacman -R gtk-theme-switch2 gedit dconf desktop-file-utils enchant gsettings-desktop-schemas gtksourceview3 iso-codes libpeas libsm python2-gobject'
[2012-07-21 15:06] Running 'pacman -R gtk-theme-switch2 gedit dconf enchant gtksourceview3 iso-codes libpeas python2-gobject'
[2012-07-21 15:06] removed gedit (3.4.2-1)
[2012-07-21 15:06] removed python2-gobject (3.2.2-1)
[2012-07-21 15:06] removed libpeas (1.4.0-2)
[2012-07-21 15:06] removed iso-codes (3.34-1)
[2012-07-21 15:06] removed gtksourceview3 (3.4.2-1)
[2012-07-21 15:06] removed enchant (1.6.0-4)
[2012-07-21 15:06] removed dconf (0.12.1-2)
[2012-07-21 15:06] removed gtk-theme-switch2 (2.1.0-2)
[2012-07-21 15:06] Running 'pacman -R glib-networking gsettings-desktop-schemas'
[2012-07-21 15:06] Running 'pacman -R libsoup glib-networking gsettings-desktop-schemas'
[2012-07-21 15:06] removed libsoup (2.38.1-1)
[2012-07-21 15:06] removed glib-networking (2.32.3-1)
[2012-07-21 15:06] removed gsettings-desktop-schemas (3.4.2-1)
[2012-07-21 15:07] Running 'pacman -R wxgtk'
[2012-07-21 15:07] removed wxgtk (2.8.12.1-3)
[2012-07-21 15:07] Running 'pacman -R libxt libsm'
[2012-07-21 15:11] Running 'pacman -S ranger'
[2012-07-21 15:11] installed ranger (1.5.4-1)
[2012-07-21 15:32] Running 'pacman -S irssi'
[2012-07-21 15:32] installed irssi (0.8.15-6)
[2012-07-24 20:20] Running 'pacman -U sublime-text-2.0.1-1-x86_64.pkg.tar.xz'
[2012-07-24 20:20] installed sublime-text (2.0.1-1)
[2012-07-24 23:41] Running 'pacman -U dropbox-1.4.11-1-x86_64.pkg.tar.xz'
[2012-07-24 23:41] installed dropbox (1.4.11-1)
[2012-07-24 23:41] Running 'pacman -U dropbox-daemon-0.8-8-any.pkg.tar.xz'
[2012-07-24 23:41] >> Configure the Dropbox daemon script by editing /etc/conf.d/dropboxd.conf
[2012-07-24 23:41] installed dropbox-daemon (0.8-8)
[2012-07-24 23:48] Running 'pacman -U dropbox-cli-1-12-x86_64.pkg.tar.xz'
[2012-07-24 23:48] installed dropbox-cli (1-12)
[2012-07-24 23:49] Running 'pacman -S nautilus'
[2012-07-24 23:56] Running 'pacman -S ranger'
[2012-07-24 23:57] upgraded ranger (1.5.4-1 -> 1.5.4-1)
[2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
[2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
[2012-07-25 00:23] Running 'pacman -Sy'
[2012-07-25 00:23] synchronizing package lists
[2012-07-25 00:24] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
[2012-07-25 00:25] installed gconf (3.2.5-2)
[2012-07-25 00:25] installed libmng (1.0.10-4)
[2012-07-25 00:25] installed qt (4.8.2-3)
[2012-07-25 00:25] installed qtwebkit (2.2.2-1)
[2012-07-25 00:27] Running 'pacman --asdeps -U openssl098-0.9.8.x-1-x86_64.pkg.tar.xz'
[2012-07-25 00:27] installed openssl098 (0.9.8.x-1)
[2012-07-25 00:28] Running 'pacman --asdeps -U libpng12-1.2.49-1-x86_64.pkg.tar.xz'
[2012-07-25 00:28] installed libpng12 (1.2.49-1)
[2012-07-25 00:30] Running 'pacman -U spotify-0.8.4.103-1-x86_64.pkg.tar.xz'
[2012-07-25 00:31] installed spotify (0.8.4.103-1)
[2012-07-29 16:57] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
[2012-07-29 16:58] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
[2012-07-29 16:58] Running 'pacman -Syy'
[2012-07-29 16:58] synchronizing package lists
[2012-07-29 17:00] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
[2012-07-29 17:00] installed gsm (1.0.13-7)
[2012-07-29 17:00] installed lame (3.99.5-1)
[2012-07-29 17:00] installed libasyncns (0.8-4)
[2012-07-29 17:00] installed json-c (0.9-1)
[2012-07-29 17:00] installed libpulse (2.1-1)
[2012-07-29 17:00] installed libtheora (1.1.1-2)
[2012-07-29 17:00] installed libglapi (8.0.4-2)
[2012-07-29 17:00] installed khrplatform-devel (8.0.4-2)
[2012-07-29 17:00] installed libegl (8.0.4-2)
[2012-07-29 17:00] installed libva (1.1.0-1)
[2012-07-29 17:00] installed libvpx (1.1.0-1)
[2012-07-29 17:00] installed opencore-amr (0.1.3-1)
[2012-07-29 17:00] installed openjpeg (1.5.0-1)
[2012-07-29 17:00] installed rtmpdump (2.4-1)
[2012-07-29 17:00] installed schroedinger (1.0.11-1)
[2012-07-29 17:00] installed speex (1.2rc1-2)
[2012-07-29 17:00] installed x264 (20120705-1)
[2012-07-29 17:00] installed xvidcore (1.3.2-1)
[2012-07-29 17:00] installed ffmpeg (1:0.11.1-1)
[2012-07-29 17:00] installed libmms (0.6.2-1)
[2012-07-29 17:00] installed libzen (0.4.26-1)
[2012-07-29 17:00] installed libmediainfo (0.7.58-1)
[2012-07-29 17:00] installed recode (3.6-7)
[2012-07-29 17:00] installed enca (1.13-2)
[2012-07-29 17:00] installed a52dec (0.7.4-6)
[2012-07-29 17:00] installed libdca (0.0.5-3)
[2012-07-29 17:00] installed talloc (2.0.7-1)
[2012-07-29 17:00] installed libwbclient (3.6.6-1)
[2012-07-29 17:00] installed libcap-ng (0.6.6-1)
[2012-07-29 17:00] installed cifs-utils (5.5-1)
[2012-07-29 17:00] installed tdb (1.2.9-2)
[2012-07-29 17:00] installed smbclient (3.6.6-1)
[2012-07-29 17:00] installed libmad (0.15.1b-6)
[2012-07-29 17:00] installed fribidi (0.19.2-2)
[2012-07-29 17:00] installed libmp4v2 (2.0.0-2)
[2012-07-29 17:00] installed faac (1.28-4)
[2012-07-29 17:00] installed faad2 (2.7-3)
[2012-07-29 17:00] installed mpg123 (1.14.4-1)
[2012-07-29 17:00] installed libass (0.10.0-3)
[2012-07-29 17:00] installed libbluray (0.2.2-1)
[2012-07-29 17:00] installed libcddb (1.3.2-3)
[2012-07-29 17:00] installed libcdio (0.83-1)
[2012-07-29 17:00] installed mencoder (35014-1)
[2012-07-29 17:00] installed libftdi (0.20-1)
[2012-07-29 17:00] installed libirman (0.4.5-3)
[2012-07-29 17:00] installed lirc-utils (1:0.9.0-22)
[2012-07-29 17:00] installed gpm (1.20.6-10)
[2012-07-29 17:00] installed aalib (1.4rc5-9)
[2012-07-29 17:00] installed jack (0.121.3-6)
[2012-07-29 17:00] installed libcaca (0.99.beta18-1)
[2012-07-29 17:00] installed xf86dgaproto (2.1-2)
[2012-07-29 17:00] installed libxxf86dga (1.1.3-1)
[2012-07-29 17:00] installed mplayer (35014-1)
[2012-07-29 17:00] Running 'pacman -U pms-1.60.0-1-x86_64.pkg.tar.xz'
[2012-07-29 17:00] installed pms (1.60.0-1)
[2012-07-29 17:20] Running 'pacman -S netstat'
[2012-07-29 17:31] Running 'pacman -S ntfs-3g'
[2012-07-29 17:31] installed fuse (2.9.0-1)
[2012-07-29 17:31] installed ntfs-3g (2012.1.15-3)
[2012-07-29 17:45] Running 'pacman -S tsmuxer'
[2012-07-29 17:45] Running 'pacman -S tsMuxeR'
[2012-07-29 17:45] Running 'pacman --noconfirm --asdeps -S -- lib32-freetype2'
[2012-07-29 17:45] installed lib32-bzip2 (1.0.6-1)
[2012-07-29 17:45] installed lib32-freetype2 (2.4.10-1)
[2012-07-29 17:48] Running 'pacman -U tsmuxer-1.10.6-12-x86_64.pkg.tar.xz'
[2012-07-29 17:48] The tsmuxer package is licensed software.
[2012-07-29 17:48] You MUST read and agree to the license stored in
[2012-07-29 17:48] /opt/tsmuxer/LICENSE before using it.
[2012-07-29 17:48] installed tsmuxer (1.10.6-12)
[2012-07-29 18:23] Running 'pacman -S icedtea-web-java7'
[2012-07-29 18:23] Running 'pacman -S icedtea-web-java6'
[2012-07-29 18:24] Running 'pacman -S openjre'
[2012-07-29 18:25] Running 'pacman -S jre'
[2012-07-29 18:25] Running 'pacman -S icetea-plugin'
[2012-07-29 18:27] Running 'pacman -S icedtea-web'
[2012-07-29 18:27] installed icedtea-web (1.2-1)
[2012-07-29 18:35] Running 'pacman -S ccache'
[2012-07-29 18:35] installed ccache (3.1.7-1)
[2012-07-29 18:50] Running 'pacman -S rtorrent'
[2012-07-29 18:50] installed libsigc++ (2.2.10-2)
[2012-07-29 18:50] installed libtorrent (0.13.2-2)
[2012-07-29 18:50] installed xmlrpc-c (1:1.31.02-2)
[2012-07-29 18:50] installed rtorrent (0.9.2-2)
[2012-07-29 18:52] Running 'pacman -S rutorrent'
[2012-07-29 18:52] Running 'pacman --noconfirm --asdeps -S -- php'
[2012-07-29 18:52] installed php (5.4.5-1)
[2012-07-29 18:52] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
[2012-07-29 18:53] installed rutorrent (3.4-2)
[2012-07-29 18:53] Running 'pacman -R rtorrent'
[2012-07-29 18:53] removed rtorrent (0.9.2-2)
[2012-07-29 18:53] Running 'pacman -S rtorrent-svn'
[2012-07-29 18:54] Running 'pacman -S rtorrent'
[2012-07-29 18:54] installed rtorrent (0.9.2-2)
[2012-07-29 18:54] Running 'pacman -S apache php-apache php-cgi mod-scgi php-xsl rutorrent-plugins php-geoip screen'
[2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl rutorrent-plugins php-geoip screen'
[2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl php-geoip screen'
[2012-07-29 18:55] installed apr (1.4.6-1)
[2012-07-29 18:55] installed unixodbc (2.3.1-1)
[2012-07-29 18:55] installed apr-util (1.4.1-1)
[2012-07-29 18:55] installed apache (2.2.22-4)
[2012-07-29 18:55] installed php-apache (5.4.5-1)
[2012-07-29 18:55] installed php-cgi (5.4.5-1)
[2012-07-29 18:55] installed php-xsl (5.4.5-1)
[2012-07-29 18:55] installed geoip-database (20120706-1)
[2012-07-29 18:55] installed geoip (1.4.8-2)
[2012-07-29 18:55] installed php-geoip (1.0.8-2)
[2012-07-29 18:55] installed screen (4.0.3-13)
[2012-07-29 19:03] Running 'pacman -U mod_scgi-1.14-1-x86_64.pkg.tar.xz'
[2012-07-29 19:03] installed mod_scgi (1.14-1)
[2012-07-29 19:03] Running 'pacman -U rutorrent-plugins-3.4-2-any.pkg.tar.xz'
[2012-07-29 19:03] installed rutorrent-plugins (3.4-2)
[2012-07-29 19:04] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
[2012-07-29 19:04] upgraded rutorrent (3.4-2 -> 3.4-2)
[2012-07-29 19:46] Running 'pacman -S unrar unzip'
[2012-07-29 19:46] installed unrar (4.2.4-1)
[2012-07-29 19:46] upgraded unzip (6.0-6 -> 6.0-6)
[2012-07-29 20:00] Running 'pacman -S php-apache mysql'
[2012-07-29 20:02] upgraded php-apache (5.4.5-1 -> 5.4.5-1)
[2012-07-29 20:02] installed libmysqlclient (5.5.25.a-1)
[2012-07-29 20:02] installed mysql-clients (5.5.25.a-1)
[2012-07-29 20:02] Installing MySQL system tables...
[2012-07-29 20:02] OK
[2012-07-29 20:02] Filling help tables...
[2012-07-29 20:02] OK
[2012-07-29 20:02]
[2012-07-29 20:02] To start mysqld at boot time you have to copy
[2012-07-29 20:02] support-files/mysql.server to the right place for your system
[2012-07-29 20:02]
[2012-07-29 20:02] PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
[2012-07-29 20:02] To do so, start the server, then issue the following commands:
[2012-07-29 20:02]
[2012-07-29 20:02] /usr/bin/mysqladmin -u root password 'new-password'
[2012-07-29 20:02] /usr/bin/mysqladmin -u root -h arch-shauder password 'new-password'
[2012-07-29 20:02]
[2012-07-29 20:02] Alternatively you can run:
[2012-07-29 20:02] /usr/bin/mysql_secure_installation
[2012-07-29 20:02]
[2012-07-29 20:02] which will also give you the option of removing the test
[2012-07-29 20:02] databases and anonymous user created by default. This is
[2012-07-29 20:02] strongly recommended for production servers.
[2012-07-29 20:02]
[2012-07-29 20:02] See the manual for more instructions.
[2012-07-29 20:02]
[2012-07-29 20:02] You can start the MySQL daemon with:
[2012-07-29 20:02] cd /usr ; /usr/bin/mysqld_safe &
[2012-07-29 20:02]
[2012-07-29 20:02] You can test the MySQL daemon with mysql-test-run.pl
[2012-07-29 20:02] cd /usr/mysql-test ; perl mysql-test-run.pl
[2012-07-29 20:02]
[2012-07-29 20:02] Please report any problems with the /usr/scripts/mysqlbug script!
[2012-07-29 20:02]
[2012-07-29 20:02] installed mysql (5.5.25.a-1)
[2012-07-29 20:49] Running 'pacman -Syyu'
[2012-07-29 20:49] synchronizing package lists
[2012-07-29 20:50] starting full system upgrade
[2012-07-29 20:52] upgraded readline (6.2.003-2 -> 6.2.004-1)
[2012-07-29 20:52] upgraded bash (4.2.036-1 -> 4.2.037-1)
[2012-07-29 20:52] upgraded bison (2.5.1-1 -> 2.6-1)
[2012-07-29 20:52] upgraded lib32-gcc-libs (4.7.1-4.1 -> 4.7.1-5)
[2012-07-29 20:52] upgraded gcc-libs-multilib (4.7.1-4.1 -> 4.7.1-5)
[2012-07-29 20:52] upgraded gnutls (3.0.21-1 -> 3.0.21-2)
[2012-07-29 20:52] upgraded libpng (1.5.11-1 -> 1.5.12-1)
[2012-07-29 20:52] upgraded libcups (1.5.3-5 -> 1.5.4-1)
[2012-07-29 20:52] upgraded gtk-update-icon-cache (2.24.10-3 -> 2.24.11-2)
[2012-07-29 20:52] upgraded gtk2 (2.24.10-3 -> 2.24.11-2)
[2012-07-29 20:52] upgraded chromium (20.0.1132.57-1 -> 20.0.1132.57-2)
[2012-07-29 20:52] warning: /etc/protocols installed as /etc/protocols.pacnew
[2012-07-29 20:52] warning: /etc/services installed as /etc/services.pacnew
[2012-07-29 20:52] upgraded iana-etc (2.30-2 -> 2.30-3)
[2012-07-29 20:52] upgraded filesystem (2012.6-4 -> 2012.7-1)
[2012-07-29 20:52] upgraded libsystemd (186-2 -> 187-2)
[2012-07-29 20:52] upgraded glib2 (2.32.3-1 -> 2.32.4-1)
[2012-07-29 20:52] upgraded systemd-tools (186-2 -> 187-2)
[2012-07-29 20:52] upgraded dbus-core (1.6.2-2 -> 1.6.4-1)
[2012-07-29 20:52] upgraded dbus (1.6.2-1 -> 1.6.4-1)
[2012-07-29 20:52] upgraded flex (2.5.35-5 -> 2.5.36-1)
[2012-07-29 20:52] upgraded gcc-multilib (4.7.1-4.1 -> 4.7.1-5)
[2012-07-29 20:52] upgraded git (1.7.11.2-1 -> 1.7.11.3-1)
[2012-07-29 20:52] upgraded glproto (1.4.15-1 -> 1.4.16-1)
[2012-07-29 20:52] upgraded gtk3 (3.4.3-1 -> 3.4.4-1)
[2012-07-29 20:52] upgraded icu (49.1.2-1 -> 49.1.2-2)
[2012-07-29 20:52] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2012-07-29 20:52] upgraded initscripts (2012.06.3-2 -> 2012.07.5-1)
[2012-07-29 20:52] upgraded lib32-readline (6.2.003-1 -> 6.2.004-1)
[2012-07-29 20:52] >>> Updating module dependencies. Please wait ...
[2012-07-29 20:52] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-07-29 20:52] ==> Building image from preset: 'default'
[2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
[2012-07-29 20:52] -> Running build hook: [base]
[2012-07-29 20:52] -> Running build hook: [udev]
[2012-07-29 20:52] -> Running build hook: [autodetect]
[2012-07-29 20:52] -> Running build hook: [pata]
[2012-07-29 20:52] -> Running build hook: [scsi]
[2012-07-29 20:52] -> Running build hook: [sata]
[2012-07-29 20:52] -> Running build hook: [filesystems]
[2012-07-29 20:52] -> Running build hook: [usbinput]
[2012-07-29 20:52] -> Running build hook: [fsck]
[2012-07-29 20:52] ==> Generating module dependencies
[2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-07-29 20:52] ==> Image generation successful
[2012-07-29 20:52] ==> Building image from preset: 'fallback'
[2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
[2012-07-29 20:52] -> Running build hook: [base]
[2012-07-29 20:52] -> Running build hook: [udev]
[2012-07-29 20:52] -> Running build hook: [pata]
[2012-07-29 20:52] -> Running build hook: [scsi]
[2012-07-29 20:52] -> Running build hook: [sata]
[2012-07-29 20:52] -> Running build hook: [filesystems]
[2012-07-29 20:52] -> Running build hook: [usbinput]
[2012-07-29 20:52] -> Running build hook: [fsck]
[2012-07-29 20:52] ==> Generating module dependencies
[2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-07-29 20:52] ==> Image generation successful
[2012-07-29 20:52] upgraded linux (3.4.5-1 -> 3.4.6-1)
[2012-07-29 20:52] upgraded linux-api-headers (3.4.4-1 -> 3.4.6-1)
[2012-07-29 20:52] upgraded mesa (8.0.4-1 -> 8.0.4-2)
[2012-07-29 20:52] upgraded nvidia (302.17-3 -> 302.17-4)
[2012-07-29 20:52] upgraded tzdata (2012c-1 -> 2012d-1)
[2012-07-29 20:52] upgraded xf86-input-evdev (2.7.0-2 -> 2.7.1-1)
[2012-08-03 12:40] Running 'pacman -S filezilla'
[2012-08-03 12:40] installed wxgtk (2.8.12.1-3)
[2012-08-03 12:40] installed libidn (1.25-1)
[2012-08-03 12:40] installed filezilla (3.5.3-1)
[2012-08-06 13:55] Running 'pacman -R openjdk'
[2012-08-06 13:55] Running 'pacman -R openjdk6'
[2012-08-06 13:55] Running 'pacman -R icedtea-web'
[2012-08-06 13:55] removed icedtea-web (1.2-1)
[2012-08-06 13:56] Running 'pacman -S jdk'
[2012-08-06 13:57] Running 'pacman --asdeps -U jre-7.5-2-x86_64.pkg.tar.xz'
[2012-08-06 13:58] removed openjdk6 (6.b24_1.11.3-1)
[2012-08-06 13:58]
[2012-08-06 13:58] The jre package is licensed software.
[2012-08-06 13:58] You MUST read and agree to the license stored in
[2012-08-06 13:58] /usr/share/licenses/jre/LICENSE before using it.
[2012-08-06 13:58] Please relogin to include jre in your PATH.
[2012-08-06 13:58]
[2012-08-06 13:58] installed jre (7.5-2)
[2012-08-06 14:01] Running 'pacman -U jdk-7.5-2-x86_64.pkg.tar.xz'
[2012-08-06 14:01]
[2012-08-06 14:01] The jdk package is licensed software.
[2012-08-06 14:01] You MUST read and agree to the license stored in
[2012-08-06 14:01] /usr/share/licenses/jdk/LICENSE before using it.
[2012-08-06 14:01] Please relogin to include jdk in your PATH.
[2012-08-06 14:01]
[2012-08-06 14:01] installed jdk (7.5-2)
[2012-08-06 14:14] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:15] Running 'pacman -R jdk jre'
[2012-08-06 14:16] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:17] Running 'pacman -Rdd jdk jre'
[2012-08-06 14:17] removed jdk (7.5-2)
[2012-08-06 14:17] removed jre (7.5-2)
[2012-08-06 14:19] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:19] The jre package is licensed software.
[2012-08-06 14:19] You MUST read and agree to the license stored in
[2012-08-06 14:19] /opt/java/jre/LICENSE before using it.
[2012-08-06 14:19] Please relogin to include jre in your PATH.
[2012-08-06 14:19] installed jre6 (6u33-b04)
[2012-08-06 14:21] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:21] The jdk package is licensed software.
[2012-08-06 14:21] You MUST read and agree to the license stored in
[2012-08-06 14:21] /opt/java/LICENSE before using it.
[2012-08-06 14:21] Please relogin to include jdk in your PATH
[2012-08-06 14:21] installed jdk6 (6u33-b04)
[2012-08-06 14:23] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:54] upgraded jre6 (6u33-b04 -> 6u33-b04)
[2012-08-06 17:23] Running 'pacman -S gimp'
[2012-08-06 17:23] installed lcms (1.19-2)
[2012-08-06 17:23] Updating font cache... done.
[2012-08-06 17:23] installed gsfonts (1.0.7pre44-3)
[2012-08-06 17:23] installed libwmf (0.2.8.4-9)
[2012-08-06 17:23] installed libcroco (0.6.5-1)
[2012-08-06 17:23] installed librsvg (2.36.1-1)
[2012-08-06 17:23] installed babl (0.1.10-1)
[2012-08-06 17:23] installed gegl (0.2.0-2)
[2012-08-06 17:23] installed freeglut (2.8.0-1)
[2012-08-06 17:23] installed jasper (1.900.1-7)
[2012-08-06 17:23] installed gimp (2.8.0-2)
[2012-08-06 18:25] Running 'pacman -Sy'
[2012-08-06 18:25] synchronizing package lists
[2012-08-06 18:25] Running 'pacman -S yaourt'
[2012-08-06 18:28] Running 'pacman -Sy'
[2012-08-06 18:28] synchronizing package lists
[2012-08-06 18:28] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
[2012-08-06 18:29] Running 'pacman -Sy'
[2012-08-06 18:29] synchronizing package lists
[2012-08-06 18:29] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
[2012-08-06 18:32] Running 'pacman --noconfirm --asdeps -S -- yajl'
[2012-08-06 21:50] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 21:51] Running 'pacman -Rdd jdk6 jre6'
[2012-08-06 21:51] removed jdk6 (6u33-b04)
[2012-08-06 21:51] removed jre6 (6u33-b04)
[2012-08-06 21:54] Running 'pacman -U sun-java6-6u32-1-x86_64.pkg.tar.xz'
[2012-08-06 21:54] The sun-java6 package is licensed software.
[2012-08-06 21:54] You MUST read and agree to the license stored in
[2012-08-06 21:54] /opt/sun-java6/LICENSE before using it.
[2012-08-06 21:54]
[2012-08-06 21:54] Use '. /opt/sun-java6/envsetup.sh' to setup environment.
[2012-08-06 21:54] installed sun-java6 (6u32-1)
[2012-08-06 21:59] Running 'pacman -Syu'
[2012-08-06 21:59] synchronizing package lists
[2012-08-06 21:59] starting full system upgrade
[2012-08-06 22:00] Running 'pacman -Sy'
[2012-08-06 22:00] synchronizing package lists
[2012-08-06 22:00] Running 'pacman -S yaourt'
[2012-08-06 22:00] installed yajl (2.0.4-1)
[2012-08-06 22:00] installed package-query (1.0.1-1)
[2012-08-06 22:00] installed yaourt (1.1-1)
[2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
[2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
[2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
[2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
[2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
[2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
[2012-08-06 22:00] Running 'pacman -S --asdeps --needed extra/jdk7-openjdk'
[2012-08-06 22:01] installed java-rhino (1.7R3-3)
[2012-08-06 22:01] installed jre7-openjdk-headless (7.u5_2.2.1-1)
[2012-08-06 22:01] when you use a non-reparenting window manager
[2012-08-06 22:01] set _JAVA_AWT_WM_NONREPARENTING=1 in
[2012-08-06 22:01] /etc/profile.d/jre.sh
[2012-08-06 22:01] installed jre7-openjdk (7.u5_2.2.1-1)
[2012-08-06 22:01] installed jdk7-openjdk (7.u5_2.2.1-1)
[2012-08-06 22:02] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.kJz/android-apktool-1.4.9-1-x86_64.pkg.tar.xz'
[2012-08-06 22:02] installed android-apktool (1.4.9-1)
[2012-08-06 22:04] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ubB/android-sdk-r20.0.1-1-x86_64.pkg.tar.xz'
[2012-08-06 22:05] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
[2012-08-06 22:05] The android group has been removed, install android packages as root.
[2012-08-06 22:05] upgraded android-sdk (r20-2 -> r20.0.1-1)
[2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.g9s/android-sdk-platform-tools-r14-1-any.pkg.tar.xz'
[2012-08-06 22:08] upgraded android-sdk-platform-tools (r12-1 -> r14-1)
[2012-08-06 22:08] Running 'pacman -S --asdeps --needed extra/libmtp'
[2012-08-06 22:08] installed libmtp (1.1.3-1)
[2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.0Uc/android-udev-1.3-4-any.pkg.tar.xz'
[2012-08-06 22:08] ===> In order to use adb, you have to be in the 'adbusers' group
[2012-08-06 22:08] ===> For that, use: gpasswd -a USERNAME adbusers
[2012-08-06 22:08] installed android-udev (1.3-4)
[2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.n8w/fastboot-20110628-2-any.pkg.tar.xz'
[2012-08-06 22:08] installed fastboot (20110628-2)
[2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.aCT/pngcrush-1.7.35-1-x86_64.pkg.tar.xz'
[2012-08-06 22:09] upgraded pngcrush (1.7.31-1 -> 1.7.35-1)
[2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ZNg/repo-git-20120806-1-x86_64.pkg.tar.xz'
[2012-08-06 22:10] Running 'pacman -S abs base-devel perl git gnupg flex bison gperf zip unzip sdl wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline alsa-lib openal'
[2012-08-06 22:11] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
[2012-08-06 22:11] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
[2012-08-06 22:11] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
[2012-08-06 22:11] upgraded lib32-libxdmcp (1.1.1-1 -> 1.1.1-1)
[2012-08-06 22:11] upgraded lib32-libxau (1.0.7-1 -> 1.0.7-1)
[2012-08-06 22:11] upgraded lib32-libxcb (1.8.1-2 -> 1.8.1-2)
[2012-08-06 22:11] upgraded lib32-libx11 (1.5.0-1 -> 1.5.0-1)
[2012-08-06 22:11] upgraded lib32-libxext (1.3.1-1 -> 1.3.1-1)
[2012-08-06 22:11] upgraded lib32-libxrender (0.9.7-1 -> 0.9.7-1)
[2012-08-06 22:11] upgraded lib32-alsa-lib (1.0.25-1 -> 1.0.25-1)
[2012-08-06 22:11] upgraded lib32-libstdc++5 (3.3.6-6 -> 3.3.6-6)
[2012-08-06 22:11] upgraded lib32-libxv (1.0.7-1 -> 1.0.7-1)
[2012-08-06 22:11] upgraded lib32-ncurses (5.9-1 -> 5.9-1)
[2012-08-06 22:11] upgraded lib32-openal (1.14-1 -> 1.14-1)
[2012-08-06 22:11] upgraded lib32-sdl (1.2.15-2 -> 1.2.15-2)
[2012-08-06 22:11] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
[2012-08-06 22:11] upgraded swt (3.7.2-1 -> 3.7.2-1)
[2012-08-06 22:11] Running 'pacman -S gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
[2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.u2K/lib32-libusb-1.0.9-1-x86_64.pkg.tar.xz'
[2012-08-06 22:12] installed lib32-libusb (1.0.9-1)
[2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ENc/lib32-libusb-compat-0.1.4-2-x86_64.pkg.tar.xz'
[2012-08-06 22:12] installed lib32-libusb-compat (0.1.4-2)
[2012-08-06 22:16] Running 'pacman -S ps3mediaserver'
[2012-08-06 22:17] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.WIi/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-06 22:17] upgraded pms (1.60.0-1 -> 1.60.0-2)
[2012-08-06 22:18] Running 'pacman -Syu'
[2012-08-06 22:18] synchronizing package lists
[2012-08-06 22:18] starting full system upgrade
[2012-08-06 22:18] Running 'pacman -Syu'
[2012-08-06 22:18] synchronizing package lists
[2012-08-06 22:18] starting full system upgrade
[2012-08-06 22:20] upgraded bison (2.6-1 -> 2.6.2-1)
[2012-08-06 22:20] upgraded chromium (20.0.1132.57-2 -> 21.0.1180.57-1)
[2012-08-06 22:20] upgraded libldap (2.4.31-4 -> 2.4.32-1)
[2012-08-06 22:20] upgraded krb5 (1.10.2-2 -> 1.10.2-3)
[2012-08-06 22:20] upgraded cifs-utils (5.5-1 -> 5.6-2)
[2012-08-06 22:20] upgraded cryptsetup (1.4.3-1 -> 1.5.0-1)
[2012-08-06 22:20] upgraded curl (7.26.0-1 -> 7.27.0-1)
[2012-08-06 22:20] upgraded flex (2.5.36-1 -> 2.5.37-1)
[2012-08-06 22:20] upgraded fuse (2.9.0-1 -> 2.9.1-1)
[2012-08-06 22:20] upgraded git (1.7.11.3-1 -> 1.7.11.4-1)
[2012-08-06 22:20] upgraded gnutls (3.0.21-2 -> 3.0.22-1)
[2012-08-06 22:20] upgraded hwids (20120711-1 -> 20120730-1)
[2012-08-06 22:20] upgraded nvidia-utils (302.17-1 -> 304.32-1)
[2012-08-06 22:20] upgraded lib32-nvidia-utils (302.17-1 -> 304.32-1)
[2012-08-06 22:20] upgraded libcups (1.5.4-1 -> 1.6.1-2)
[2012-08-06 22:20] upgraded libmysqlclient (5.5.25.a-1 -> 5.5.27-1)
[2012-08-06 22:20] upgraded libsystemd (187-2 -> 187-4)
[2012-08-06 22:20] upgraded libthai (0.1.17-1 -> 0.1.18-1)
[2012-08-06 22:20] upgraded systemd-tools (187-2 -> 187-4)
[2012-08-06 22:20] upgraded mkinitcpio (0.9.2-2 -> 0.10-1)
[2012-08-06 22:20] >>> Updating module dependencies. Please wait ...
[2012-08-06 22:20] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-08-06 22:20] ==> Building image from preset: 'default'
[2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
[2012-08-06 22:20] -> Running build hook: [base]
[2012-08-06 22:20] -> Running build hook: [udev]
[2012-08-06 22:20] -> Running build hook: [autodetect]
[2012-08-06 22:20] -> Running build hook: [pata]
[2012-08-06 22:20] -> Running build hook: [scsi]
[2012-08-06 22:20] -> Running build hook: [sata]
[2012-08-06 22:20] -> Running build hook: [filesystems]
[2012-08-06 22:20] -> Running build hook: [usbinput]
[2012-08-06 22:20] -> Running build hook: [fsck]
[2012-08-06 22:20] ==> Generating module dependencies
[2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-08-06 22:20] ==> Image generation successful
[2012-08-06 22:20] ==> Building image from preset: 'fallback'
[2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
[2012-08-06 22:20] -> Running build hook: [base]
[2012-08-06 22:20] -> Running build hook: [udev]
[2012-08-06 22:20] -> Running build hook: [pata]
[2012-08-06 22:20] -> Running build hook: [scsi]
[2012-08-06 22:20] -> Running build hook: [sata]
[2012-08-06 22:20] -> Running build hook: [filesystems]
[2012-08-06 22:20] -> Running build hook: [usbinput]
[2012-08-06 22:20] -> Running build hook: [fsck]
[2012-08-06 22:20] ==> Generating module dependencies
[2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-08-06 22:20] ==> Image generation successful
[2012-08-06 22:20] upgraded linux (3.4.6-1 -> 3.4.7-1)
[2012-08-06 22:20] upgraded mysql-clients (5.5.25.a-1 -> 5.5.27-1)
[2012-08-06 22:20] upgraded mysql (5.5.25.a-1 -> 5.5.27-1)
[2012-08-06 22:20] upgraded nspr (4.9.1-1 -> 4.9.2-1)
[2012-08-06 22:20] upgraded nvidia (302.17-4 -> 304.32-1)
[2012-08-06 22:20] upgraded tzdata (2012d-1 -> 2012e-1)
[2012-08-06 22:20] upgraded xf86-input-evdev (2.7.1-1 -> 2.7.2-1)
[2012-08-06 22:23] Running 'pacman -S openjdk'
[2012-08-06 22:23] Running 'pacman -S jdk7-openjdk'
[2012-08-06 22:24] upgraded jdk7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
[2012-08-06 22:24] Running 'pacman -S jre7-openjdk'
[2012-08-06 22:24] upgraded jre7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
[2012-08-06 22:25] Running 'pacman -R pms'
[2012-08-06 22:25] warning: /opt/pms/PMS.conf saved as /opt/pms/PMS.conf.pacsave
[2012-08-06 22:25] removed pms (1.60.0-2)
[2012-08-06 22:26] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.QTF/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-06 22:26] installed pms (1.60.0-2)
[2012-08-06 22:26] Running 'pacman -S vlc'
[2012-08-06 22:26] installed libdvbpsi (0.2.2-1)
[2012-08-06 22:26] installed sdl_image (1.2.12-2)
[2012-08-06 22:26] installed libdvdread (4.2.0-1)
[2012-08-06 22:26] installed libdvdnav (4.2.0-2)
[2012-08-06 22:26] installed libkate (0.4.1-3)
[2012-08-06 22:26] installed libtiger (0.3.4-3)
[2012-08-06 22:26] installed libebml (1.2.2-2)
[2012-08-06 22:26] installed libmatroska (1.3.0-2)
[2012-08-06 22:26] installed zvbi (0.2.33-4)
[2012-08-06 22:26] installed taglib (1.7.2-2)
[2012-08-06 22:26] installed libmpcdec (1.2.6-3)
[2012-08-06 22:26] installed libupnp (1.6.17-1)
[2012-08-06 22:26] installed libshout (1:2.3.0-1)
[2012-08-06 22:26] installed libmpeg2 (0.5.1-3)
[2012-08-06 22:26] installed libmodplug (0.8.8.4-1)
[2012-08-06 22:26] installed ttf-freefont (20120503-1)
[2012-08-06 22:26] installed vlc (2.0.3-2)
[2012-08-06 22:26] Running 'pacman -S lib32-gcc-libs lib32-glibc'
[2012-08-06 22:26] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
[2012-08-06 22:26] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
[2012-08-07 11:44] Running 'pacman --noconfirm --asdeps -S -- pacman-color'
[2012-08-07 11:44] installed pacman-color (4.0.3-1)
[2012-08-07 11:44] Running 'pacman -U packer-color-20120807-1-any.pkg.tar.xz'
[2012-08-07 11:44] installed packer-color (20120807-1)
[2012-08-07 11:50] Running 'pacman-color -S packer'
[2012-08-07 15:50] Running 'pacman -Syyu'
[2012-08-07 15:50] synchronizing package lists
[2012-08-07 15:50] starting full system upgrade
[2012-08-07 15:50] upgraded libwbclient (3.6.6-1 -> 3.6.7-1)
[2012-08-07 15:51] upgraded smbclient (3.6.6-1 -> 3.6.7-1)
[2012-08-07 15:51] Running 'pacman -Sy'
[2012-08-07 15:51] synchronizing package lists
[2012-08-07 15:51] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.77j/rutorrent-plugins-3.4-3-any.pkg.tar.xz'
[2012-08-07 15:51] upgraded rutorrent-plugins (3.4-2 -> 3.4-3)
[2012-08-07 15:51] Running 'pacman -Sy'
[2012-08-07 15:51] synchronizing package lists
[2012-08-07 16:02] Running 'pacman-color -S crontab'
[2012-08-07 16:02] Running 'pacman-color -S cronjob'
[2012-08-07 16:02] Running 'pacman-color -S cron'
[2012-08-07 16:02] upgraded cronie (1.4.8-2 -> 1.4.8-2)
[2012-08-07 16:04] Running 'pacman-color -S cronie'
[2012-08-07 16:05] Running 'pacman-color -S esmtp procmail'
[2012-08-07 16:05] installed libesmtp (1.0.6-2)
[2012-08-07 16:05] installed esmtp (1.2-4)
[2012-08-07 16:05] installed procmail (3.22-5)
[2012-08-08 12:10] Running 'pacman -Sy'
[2012-08-08 12:10] synchronizing package lists
[2012-08-08 12:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.82R/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-08 12:12] upgraded pms (1.60.0-2 -> 1.60.0-2)
[2012-08-08 18:02] Running 'pacman -R pms'
[2012-08-08 18:02] removed pms (1.60.0-2)
[2012-08-08 18:02] Running 'pacman -Sy'
[2012-08-08 18:02] synchronizing package lists
[2012-08-08 18:03] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.BkP/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-08 18:03] installed pms (1.60.0-2)
[2012-08-08 18:17] Running 'pacman -S extra/icedtea-web'
[2012-08-08 18:17] Running 'pacman -S extra/icedtea-web-java7'
[2012-08-08 18:18] installed icedtea-web-java7 (1.2.1-2)
[2012-08-08 18:36] Running 'pacman -R pms'
[2012-08-08 1shadowlurker wrote:
It's problem in pam configuration files. You need to create files useradd, userdel, groupadd and groupdel in /etc/pam.d/ directory with following content:
auth sufficient pam_rootok.so
auth required pam_unix.so
account required pam_unix.so
session required pam_unix.so
password required pam_permit.so
You da man! I also had to add grpconv and chage to get filesystem working but all seems well now thanks!
Doug piston had me try something that I think will help anyone else who has this problem. Try re-installing pambase and shadow. It generated back most of any I was missing.
Last edited by shauder (2012-11-03 00:55:19) -
Problem with MSI X58 Platinum SLI - IOH temperature !
Hi guys.
I have this PC configuration:
- MSI X58 Platinum SLI ( Bios Version 3.8 - http://img822.imageshack.us/img822/6707/161020101249.jpg )
- Intel Core i7 930 2.80 GHz box ( with Intel Turbo Boost running sometimes at 3.06 Ghz )
- MSI GeForce GT240 1GB DDR5 128-bit HDMI
- Corsair 6GB DDR3 1333MHz CL9 XMS3 Triple Channel Kit ( sets to AUTO and running at 1066 Mhz )
- Corsair CMPSU-750TXEU
- Ordinary case ( http://img828.imageshack.us/img828/4200/161020101246.jpg & http://img29.imageshack.us/img29/8480/161020101247.jpg ).
- Windows 7 Ultimate 64 bit.
I bought my PC components 2 months ago, so they are new.
Now, guys I think that is a problem with my motherboard. When I turn on the computer in Bios I have this temps: CPU – 30 C (86 F); IOH – 71 C (159 F); System 30 C (86 F) - http://img687.imageshack.us/img687/394/161020101242.jpg. After 2 minutes the temperatures are: CPU – 34 C (93 F); IOH – 82 C (179 F); System 41 C (105 F) and 2 more minutes later the temperatures are: CPU – 34 C (93 F); IOH – 84 C (183 F); System 43 C (109 F). After 30 minutes of doing nothing I have this temps: CPU – 35 C (95 F); IOH – 85 C (185 F); System 42 C (107 F) -
Guys it is normal with IOH temperature ? I am a little worried about it ( to be honest I am more than “a little” … I am worried a lot ).
Ok, I know I don’t have a good case but in 3 weeks I should receive this Thermaltake Spedo Advance Case (http://www.thermaltakeusa.com/Product.aspx?C=1121&ID=1829) and I will buy a new CPU cooler ( I don’t know yet wich one – maybe Corsair CWCH70 or Noctua NH-D14 but I have to see the case first … to be sure there is a plenty of space for those coolers ).
Pls help me with that IOH temperature. It is normal ? What if I intend to make a little OC ( lets say CPU to 3652 Mhz and RAM to 1333 Mhz … but also I will ask for your support ! ) my motherboard will burn ?
If it is necessary I will contact my retailer and send him back the motherboard but … I like MSI a lot.
Thx guys for your support !Hey guys,
Here is a nice cheap alternative.
Here is my story about the same issue. I found it after looking at why my computer freezes sometimes. Not very often but enough for me to do some investigation. I noticed my IOH temp was a whopping 117 degrees Celsius. lol. Surprised my mobo didn't burn out by now. I wanted to evaluate the situation with the heat sink and decided to take it off. After taking it off I found extremely crusty purple compound on board the chipset and the heatsink. I took me FOREVER to scrape it off. it was almost like a cement which I found odd. After scraping and cleaning the surfaces with alcohol, I placed some silver compound on and proceeded to put it back on.
Well, upon hooking everything back up I was still at 95 to 103 degs. Now I started to really look at the options to replace this. I had SLI config which means I had to do something clever with the southbridge as well. A nice thermaltake chipset solution w/fan and a low profile copper southbridge with shipping was about 45 bucks. Hmm ... This is a sure fix from the threads I have read and its really kid of expensive to fix a simple defect. the problem is not necessarily with the heatsink not being sufficient. Its the combo of the compound used vs the amount of pressure applied between the heatsink and chipset. It was completely unacceptable. I knew this right away when I was watching the temp and then I would press on the top of the IOH heatsink and I would watch it drop another 15 degrees in less then 10 seconds. The springs are extremely weak and not effective at all in transferring the heat from the NB.
Here if my fix. Cost me less than a dollar at the hardware store and it works ideal thus far. Do this at your own risk. Doing this will probably void any warranty too. All my problems are solved and I am running at 57 degrees, YES, 57 degrees with the stock heatsink and no additional cooling.
For one scrape all that old crap off like I did. Apply your new compound. But when you go to replace your heatsink, use the following method. The trick is to use metal screws with a mobo washer, original springs from the plastic studs and a nylon locknut. Use screws that are the same diameter and length (maybe a tad bit longer) as the plastic retainer studs. Also grab a few of those red nylon mobo washers too, were gonna need them as well.
After scraping and applying compound, reassemble as follows. Screw with washer inserted into the back of the mobo so the threads are out front. The plastic/nylon washer is betweeen the screwhead and the back of the mobo as a insulator. Put the heatsink on. With the threads thru the heatsink already, put the springs on and start spinning on the locknut. I torqued the nut down on the spring until the spring almost became fully compressed. The purpose of the spring here is really to prevent you breaking something and at the same time using the max force of the spring since it weak to begin with. Thats why we need to compress it down pretty much all the way. There will be little to no room in the spring at this point. The heatsink at this point should be pretty solid to the board as well. I noticed with the plastic studs before the heatsink would wobble if you gave it a little rocking back and forth before. Not this time. Shouldn't move much if at all. Remember not to torque down too much. You don't want to go beyond the springs compression. Even if you did by accident, its better then not using a spring at all. If you feel that it starts to feel tight when torquing, you torqued too far. Stop an backup a 1/4 turn or so. It is also very important to make sure both torques are equal on both sides as well. Alternate sides when torquing down. I could tell by how much thread I had left on both sides and by looking for any uneven sides.
To summarize, the compound is a problem no doubt. After you resolve the compound issue, its all about the adequate pressure between the heatsink and the IOH. Much like the amount of pressure needed between your CPU and your heatsink give or take. And the pressure that would be as an aftermarket solution like the thermaltake chipset cooler. You dont see cheesy springs on that. Wake up MSI. Simpy using a more effective spring could save MSI some cash in the long run. I envision a leafsprin design like the thermaltake chipset one. The heatsink design could be better, sure, but the design itself is not the problem. Replace the heatsinks if you would like to, if your overclocking and stuff. Funny, this board I have is a refurb too and only had it for a few weeks. Figured they would have done something about it.
Sorry the pics are not the best. Here is about as close as I could get to the finished product -
Problem with standby and Vista
Hi!
I've a problem with my X61 with the Turbo Memory and Vista x64: When I install the driver for Turbo Memory, I cannot resume from standby. The notebook does only a "normal" reboot.
Can anybody help me with this problem?
scwwell after a lengthy talk with many microsoft reps i found something. I was an updated version of this "WUDfrd.sys" file. But the problem was that i could not see a download link. but after a little while i convinced microsoft to give it to me. at first it looked like it had potential but after i restarted, every went down the plug hole. here is the link that i was talking about.
http://support.microsoft.com/kb/933607/en-us
problem still not solved and not looking to be solved for a long time by the looks of things.... NOT HAPPY JAN!!! -
Is there a software problem with Airport Extremes?
I recently bought a new 802.11ac next generation AE to replace my old generation AE mainly for the increased wifi speeds. I have been having trouble though getting my proper wired speed using the router though. I didn't have problems with the previous version in the past. But now using the new one I get low speeds at times, but its not constant. I have comcast and get 60 mbps speeds when hooked up straight to my PC. Using the AE, at times I get the same speeds, but usually now it drops all the way to like 12 mbps. I don't understand what it is, and thought about returning the AE but I have past my purchase time to return. The other night I used speedtest.net and I got 12 mbps. So I unplugged the comcast modem and restarted everything and it went back up to 60 mbps. But it seems to drop down to 12 constantly. I tried the same process last night, and it did not return to 60 mbps, it stayed at 12. So I still have my old AE, and hooked that up figuring I would not have the same issue. Yet I totally did. 12 mbps again. So is this some sort of software issue that is making this happen, I don't understand it. I see people having trouble with WiFi speeds on here, but this is a wired connection. I also thought I would test the wifi for the heck of it while I was getting 12 mbps wired through my AE. So I used my phone connected to wifi and ran speedtest, and I got 23. So how can my wifi speed get higher returns than my wired connection? Can anyone help?
Thanks,
EddieI'm having a similar issue. I have TWC turbo cable in Manhattan. I get 20Mbps download speed when I connect a Mac directly to the modem via ethernet. When I use the current gen AirPort Extreme, my internet speed gradually decreases to unusable. Less than 1Mbps. Websites timeout before loading. My LAN still works, but internet crawls. Doesn't matter if a device is wired directly to Airport or wirelessly connected - internet crawls, if I'm lucky.
This is after weeks of things running perfectly with this airport. Over the past few days, I'm dying.
I spent time with TWC to make sure it wasn't on their end. Reset the modem. Ran signal tests. Rebooted everything. It's not an issue on their end. As soon as I plug directly into their arris modem, I'm golden. 20Mbps download again.
I hard reset my AirPort Extreme, and set it up as if it was brand new. But internet speeds still drop to slow to unusable when I'm going through AirPort Extreme.
Had some luck getting speeds up to usable by specifying DNS servers from TWC in airport, but this was false hope. Overnight, internet speeds were back down to less than 1Mbps.
Again, if I connect a mac directly to the modem, I'm getting 20Mbps speeds again, as I should. -
How to solve a serious problem with the Battary of my T500 laptop ?
Hi Forum,
My personal laptop is Lenovo THINKPAD T500 2055, and its main specifications are as follows:
- 39T6651 SBB 9 CELL LI-ION BATTERY
- Intel Core 2 Duo processor T9400 (2.53GHz 1066MHz 6MBL2)
- 8 GB DDR3 SDRAM Memory Module 4 GB (2 x 4 GB) 1066MHz DDR31066/PC38500 DDR3 SDRAM SoDIMM Kingston.
- 2 GB Intel Turbo Memory hard drive cache.
- ATI Mobility Radeon 3650 with 256MB.
- 160 GB Hard Disk Drive, 7200rpm.
- Windows 7 Ultimate with the latest Service Pack (x64).
My problem precisely and concisely is the Battary. I have been using my laptop with the same battary since 01.01.2009 (Almost 3.5 Years), and the battary has been working quite OK.
Most of the time my laptop is plugged in and working with the electricity. However, A very few times I used the laptop while it is running on battery, Nevertheless, I have the habit to empty the batter once in a while i.e. Every 3 weeks, I unplug the charger and keep using the laptop till I see the warning orange sign (5%), then, I plug it in again.
Thankfully, I never had any problems with the battary nor the laptop, and when I charge the laptop usually it shows full sign (100%).
Three days ago, All of a sudden my laptop starts flashing the orange battary sign constantly while charge indicates 100%. When I try running on the battery by unplugging the AC adapter, the laptop loses power immediately and shuts down right away.
What do you think should I do? Could you please provide me any useful tips to resolve this problem?
I would greatly and sincerely appreciate all your inputs !
Thanks for your consideration of my request, and I very much look forward to hearing from you at your earliest convenience !
Solved!
Go to Solution.In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine -
Workstation specs -- Any problems with this system quote?
Here are the specs I have been quoted. I'm not terribly knowledgeable about hardware, does anyone see any problems with this system? I have recently started shooting and editing weddings, engagements and corporate videos. I think it may be bit more than I need, but I would much prefer that to less than I need. Any input from the more tech savvy users would be much appreciated.
Darren Breckles
65539
ASUS Sabertooth X79 ATX LGA2011 DDR3 3PCI-E16 2PCI-E SATA3 USB3.0 SLI CrossFireX Audio Motherboard [Sabertooth X79]
72374
Mushkin Enhanced Blackline Frostbyte 32GB 4X8GB PC3-12800 DDR3-1600 CL10 Quad Channel Memory Kit [994055]
64540
Noctua NH-D14 SE2011 LGA2011 Heatpipe Cooler w/ NF-P14 140mm & NF-P12 120mm PWM Fans [NH-D14 SE2011] [Reg. $89.99]
67678
Intel 520 Series 240GB 2.5in SSD MLC 25nm SATA3 Solid State Disk Flash Drive OEM [SSDSC2CW240A310] [Reg. $279.99]
4729477
8 port internal via 2X SFF-8087, LSI2208 1GB cache, 6Gb/s, RAID 0/1/10/5/50/6/60 [RS25DB080]
1
84358
MSI GeForce GTX 770 OC Twin Frozr IV 1098/1150MHZ 2GB 7GHZ GDDR5 2xDVI HDMI DP PCI-E 3.0 Video Card [N770 TF 2GD5/OC] [Reg. $429.99]
62678
ASUS BW-12B1ST Blu-Ray Writer 12X BD-R 16X DVD+R SATA Black Retail [BW-12B1ST/BLK/G/AS][Reg. $89.98]
Environmental Fee $0.75 Per Item
45275
Microsoft Windows 7 Professional Edition 64Bit DVD SP1 OEM [FQC-04649] [Reg. $153.98]
75044
Fractal Design Define R4 ATX Tower Case Black Pearl 2X5.25 8X3.5INT No PSU Front 2XUSB3.0 Audio [FD-CA-DEF-R4-BL] [Reg. $119.99]
77641
Corsair AX860 860W ATX 12V V2.31 80 Plus Platinum Modular Power Supply Active PFC 120mm Fa *IR-$10* [CP-9020044-NA] [Reg. $189.89]
49665
nMedia ZE-C118 3.5in Multi Function Panel Flash Card Reader W/USB2.0 eSATA SDHC2.0 Win 7 Black [ZE-C118 ] [Reg. $19.99]
58276
StarTech.com 3.5in Hard Drive to 5.25in Front Bay Bracket Adapter [BRACKETFDBK]
78186
Noctua NF-A14 FLX 140mm Ultra Quiet Cooling Fan 900-1200RPM 115.5M3/H 19.2DBA 3-PIN [NF-A14 FLX] [Reg. $22.99]
4
22823
Premium PC Assembly and Testing With 1 Year Limited NCIX Warranty (PRE-CONFIG WIN. OS If Purchased)
Environmental Fee $3.00 Per Item
Note: Includes extra attention to cabling, lighting installation and extra burn-in period. Recommended for windowed cases. Assembly requires an additional 4-5* business days to ship once all parts are in stock. *typical lead time (currently 2-5 business days)
1
$3.00
73920-1
NCIX 3 Year On-Site Care Coverage for PC $3000.00 - $3999.99 (22823)
89510
Intel Core i7 4930K 6 Core 3.4GHZ (3.9GHZ Turbo) 12MB Hyperthreading LGA2011 Processor No HSF [BX80633i74930K] [Reg. $649.99]
81958
Western Digital RE 2TB SATA3 7200RPM 64MB Cache 3.5in Internal Hard Drive [WD2000FYYZ] [Reg. $213.57]
Environmental Fee $0.75 Per Item
4Very nice build list Darren!
I would have selected the Samsung 840 Pro 256GB SSD over the Intel 520, and Areca's ARC-1882i over the Intel SAS controller you list, but those are preferences not essential changes.
Regards,
Jim -
Hello
I build new PC with:
i5-760
Noctua NH-D14
MSI P55-GD65
G.Skill 2x2GB CL7 ECO
Antec TruePower New 750W TP-750
TwinTech GF 9600GT
I have problem with CPU voltage as even when I set it for example to 1.201v in bios, under load it overshot to 1.256-1268. The best is when I oc`ed cpu to 4GHZ and set voltage in bios for 1.30v it overshot for 1.45v+! Not to mention that temps are skyhigh from that. It doesn`t matter if I try to put BIOS Vcore on 1.1v on stock because under load it still rise to 1.16. I turned off all eist, c-state, turbo boost, phase led and switch phase, set vdrop to low and still something is wrong here. I updated the bios under dos from USB stick to newest 1.9 version in order to update CPU micro code without error and it not helped. I want to know is that even possible to fix or should I RMA MB or CPU.
Minor problem is with sysfans as they power on for a second and turn off instantly to start working again when I see list on devices in post. After rebot when my monitor is switched off it takes something like 5 sec to power monitor on and another 5 to show bios, is that normal?I have similar issues, it's hard to tell which measurement is the most accurate, there are 2 different measurements in the control center that don't match up with the figures set in the bios. The only way to be sure would be to get an expensive accurate multimeter but If you're only interested in running a stable overclocked computer without knowing the exact figures then get the computer running stable and lower the voltages until it starts to become unstable with prime95,
Or you could work the other way round, set the voltages so it boots but doesn't run prime95 for long, then raise the vcore and vtt one at a time until your happy with the length of time prime95 runs without errors. I'd be happy with 24 hours, I seem to remember errors creeping in at around the 9 hour mark on the setting below what I have it set to now. -
Problem with repaired neo fis2r
I am experiencing performance problems with my neo tha t I am not sure where to begin trouble shooting. I had an video card falure(delaminated pin on agp ) which resulted in damage to the agp slot I rma 'd my neo and it returned marked repaired with a grey agp slot , bios 1.4 ( had 1.6 installed) and the same serial #. I reinstalled all components. noted the retrograde bios and flashed to 1.8. then I attempted to return all settings to theyre original state only to find that I can't overclock! previously I got 250mhz clock with perf mode set to ultra turbo and ram set to 333mhz . now I can't get past perf mode fast and 205mhz no matter what. I see references to bios 1.8 as being not very overclockable.this may be the problem but the waters have been muddied by the multitude of events. I am not an expert and do not know where to start. I was so thrilled with the performance of my neo and now I am at a loss . Is the bios responsible for this abysmal performance or is my system still compromised? I don't know what to do to determine its state. my system is as follows:-
neo fis2r( of course)
2.4c p4 with zalman alcu 7000
ati 8500dv
512mb samsung 400mhz ram
seagate barracuda sata 150 raid 0
pci modem card
thermaltake xaser2 case
any suggestions would be greatly appreciated
kevessentially I am not just concerned about it's current inability to overclock. but more in the fact that b4 the repiar of the board I was able to overclock with no difficulty and no special considerations. in fact when I look at my little log of bios settings the agp clock was set at 66.6/33.3 after all the overclocking. and now with EXACTLY the same components( ati card repalced but physically identical) none of those same settings work. did the failure damage other components whose failure is not yet critical path or has the bios upgrade caused instability?
-
Hey peeps
Got this board recently, thought i'd give the KT600 chipset a go as i had to go nForce2 way, when the KT400 has so many problems with the Radeon9700 pro. Anyhow, board arrived, new XP3200 arrived too. i also have Samsung PC3200 ddr... sweet. One problem...
If i leave the bios settings on default with the ram in, i get three beeps (ram fault).
I set the ram speed in the bios, put the ram in, starts first time. put the FSB to 200, and mobo reports its an AthlonXP3200+. Sweet. Except after about 5 seconds through the boot, the PC switches off?!!?
It wont turn back on again without pulling the power cable and putting the cable back in. If i lower the FSB to 166, the mobo reports its an xp2500+, at 1.82ghz...
Anyone got any idea's? to me it seems like it might be over heating... but i have the cooler master aero 7, on full blast, and the heatsink is STONE COLD all the time.... havent tried dissabling the Shut down on over heat yet... bit catious over that!!
Anyone else with similar probs?
The CPU has been RMA'd cause of faulty first one, but this one def works. as does the ram and mobo (each have been tested independently on diferent machines)Could be memory related or both psu and memory related If I load "high speed xxx" preset there is no 200fsb at all. If I enable the last setting, fast2xxx something all is fine except 3D crash to desktop. Set memory voltage to 2.7 and go experimental on timing page in bios. The top system preset really seem to make biggest difference, Fast is so so but should work for all mankind, Turbo very good/aggressive, Ultra dont work for me at 200 and is actually slower at 166
VIA still have old problem with agp/pci speed so 195 might be too high for ATI card and hds. But lower fsb could be best setup if you have problems with aggressive bios timings at 200. I know 187 with Turbo give best 3dmark for me (only works with 1x512, not 2x but cant have it all...). Almost certain any fsb that allows lowest latency and most chipset/memory controller tweaks will give best overall performance. A few more fsb dont matter in comparison. With lower fsb you will have to change multiplier to get enough mhz out of that overpriced product you use In case you doubt KT600 will work with XP3200 I can tell you that is how a XP2500 is being seen at 11x200. 12.5 is highest multi? 12.5x176 give 2200mhz so start from there and work your way up. Wont help that much if psu is to blaim tho. -
Problem with System Control Manager on MSI GX660
HI.
I am new
I have problem with my MSI GX660.
Since yesterday SCM didn't work for me.
When windows starts, SCM have appcrash error and FN, and touchpad(eco,turbo,wifi) didn't work.
I installed the newest version of SCm but still didn't work.
I have Windows 7 x64
Sory for my English-I am from PolishQuote from: Bas on 03-March-11, 02:24:11
Did you install SP1 yesterday?
I don't know did SP1 but I install some new updates yesterday.
This is the problem? -
SOLUTION for my problems with MSI Z77A-GD65 + MSI N670 PE 2GD5/OC
Lately I had problems with my GTX 670 video card (MSI N670 PE 2GD5/OC) under Windows 7 Pro x64.
I got a lot of "Display driver stopped responding and has recovered" errors.
I had these errors once or twice a day, so I didn't really bother looking for an answer, also I couldn't reproduce the error.
Most games just worked fine, but not always... so I tried if I could reproduce the error.
I tried to stress test with MSI Kombustor and voila no windows error... noo... but the core voltage went to 0 mV within a minute and everything (screen / windows / kombustor) stuttered and I had to restart the system.
The strange thing was that the voltage went to 0 mV, but the GPU load went from 96% - 60% and back to 96%... why and how is this possible??
Now I could reproduce my problem... yes!
First I thought it was a driver problem, because I updated it to the newest version (310.70), so I tried to re-install an older driver and also the original MSI driver... no luck.
Maybe it could be a mainboard driver or some settings in windows, so I installed Windows 8... no luck.
Re-installed Windows 7 Pro x64 (basically because Windows 8 s*cks)... no luck.
I tried to put my video card in another system and there was no problem... so I thought my video card is not broken...
Maybe it's my my power supply... new power supply... no luck again... grrrr...
My solution was downgrading / flashing my mainboard (MSI Z77A-GD65) bios back to 1.5 instead of 1.7, because yes... live update had updated my bios... that was the problem.
I wanted to post this, because I couldn't really find the answer for my problem and maybe I can help a few people with the same configuration and problems.
Live well and... well you get the ideaQuote from: flobelix on 21-August-13, 04:12:05
Don't use TF II/TF III parts as they won't fit. Arctic Accelero Twin Turbo II or Accelero Mono PLUS are good value for money aftermarket solutions.
Thank you for the information and advice. As I was looking into those two, I noticed that Accelero's website claimed the Accelero Xtreme III would also fit, and NewEgg had it on sale, so that is what I wound up purchasing. It works quite well and is MUCH quieter than the Twin Frozr IV, even before the grinding noise started.
For anyone else considering this, please be aware that the Xtreme III is monstrously huge (it adds several inches to the length of the MSI N670 PE). Make sure you have plenty of room in your case for it. -
After 10.8.5 update my late 2012 Imac takes twice as long to boot. After it finally does boot I have no mouse or keyboard input for about 4 minutes. I can't boot into safe mode since I have no keyboard input to enter my password. I can get my mouse and keyboard input back if I use the power button to put the computer to sleep and then wake it. I have removed all third party utilities ( I think ), same problem. I had the same problem with 10.8.4. HELP!!!
9/20/13 1:58:51.243 PM loginwindow[41]: DEAD_PROCESS: 41 console
9/20/13 1:59:09.000 PM bootlog[0]: BOOT_TIME 1379699949 0
9/20/13 1:59:33.000 PM kernel[0]: PMAP: PCID enabled
9/20/13 1:59:33.000 PM kernel[0]: PMAP: Supervisor Mode Execute Protection enabled
9/20/13 1:59:33.000 PM kernel[0]: Darwin Kernel Version 12.5.0: Mon Jul 29 16:33:49 PDT 2013; root:xnu-2050.48.11~1/RELEASE_X86_64
9/20/13 1:59:33.000 PM kernel[0]: vm_page_bootstrap: 1950177 free pages and 130591 wired pages
9/20/13 1:59:33.000 PM kernel[0]: kext submap [0xffffff7f80742000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000742000]
9/20/13 1:59:33.000 PM kernel[0]: zone leak detection enabled
9/20/13 1:59:33.000 PM kernel[0]: standard timeslicing quantum is 10000 us
9/20/13 1:59:33.000 PM kernel[0]: standard background quantum is 2500 us
9/20/13 1:59:33.000 PM kernel[0]: mig_table_max_displ = 74
9/20/13 1:59:33.000 PM kernel[0]: TSC Deadline Timer supported and enabled
9/20/13 1:59:33.000 PM kernel[0]: corecrypto kext started!
9/20/13 1:59:33.000 PM kernel[0]: Running kernel space in FIPS MODE
9/20/13 1:59:33.000 PM kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
9/20/13 1:59:33.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
9/20/13 1:59:33.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
9/20/13 1:59:33.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
9/20/13 1:59:33.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
9/20/13 1:59:33.000 PM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
9/20/13 1:59:33.000 PM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
9/20/13 1:59:33.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
9/20/13 1:59:33.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
9/20/13 1:59:33.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
9/20/13 1:59:33.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
9/20/13 1:59:33.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
9/20/13 1:59:33.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
9/20/13 1:59:33.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
9/20/13 1:59:33.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
9/20/13 1:59:33.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
9/20/13 1:59:33.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
9/20/13 1:59:33.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
9/20/13 1:59:33.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
9/20/13 1:59:33.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
9/20/13 1:59:33.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
9/20/13 1:59:33.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
9/20/13 1:59:33.000 PM kernel[0]: calling mpo_policy_init for Sandbox
9/20/13 1:59:33.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
9/20/13 1:59:33.000 PM kernel[0]: calling mpo_policy_init for Quarantine
9/20/13 1:59:33.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
9/20/13 1:59:33.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
9/20/13 1:59:33.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
9/20/13 1:59:33.000 PM kernel[0]: MAC Framework successfully initialized
9/20/13 1:59:33.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
9/20/13 1:59:33.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
9/20/13 1:59:33.000 PM kernel[0]: ACPI: sleep states S3 S4 S5
9/20/13 1:59:33.000 PM kernel[0]: pci build Aug 29 2013 20:19:31, flags 0x23008, pfm64 (36 cpu) 0xf80000000, 0x80000000
9/20/13 1:59:33.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 3455
9/20/13 1:59:33.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 16:43:02 Jul 29 2013) initialization complete
9/20/13 1:59:33.000 PM kernel[0]: [ PCI configuration begin ]
9/20/13 1:59:33.000 PM kernel[0]: console relocated to 0xf80020000
9/20/13 1:59:33.000 PM kernel[0]: [ PCI configuration end, bridges 15, devices 17 ]
9/20/13 1:59:33.000 PM kernel[0]: AppleThunderboltNHIType2::setupPowerSavings - GPE based runtime power management
9/20/13 1:59:33.000 PM kernel[0]: FireWire runtime power conservation disabled. (3)
9/20/13 1:59:33.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 PCI now active, GUID 000a2702004676ec; max speed s800.
9/20/13 1:59:33.000 PM kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
9/20/13 1:59:33.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
9/20/13 1:59:33.000 PM kernel[0]: rooting via boot-uuid from /chosen: 81D2A50D-EFB8-362B-A5D7-365ADCFF4BBA
9/20/13 1:59:33.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
9/20/13 1:59:33.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
9/20/13 1:59:33.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
9/20/13 1:59:33.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
9/20/13 1:59:33.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
9/20/13 1:59:33.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
9/20/13 1:59:33.000 PM kernel[0]: BTCOEXIST off
9/20/13 1:59:33.000 PM kernel[0]: BRCM tunables:
9/20/13 1:59:33.000 PM kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
9/20/13 1:59:33.000 PM kernel[0]: USBMSC Identifier (non-unique): KUSC5T70217 0x5ac 0x1500 0x202, 2
9/20/13 1:59:33.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP05@1C,4/IOPCI2PCIBridg e/UPSB@0/IOPCI2PCIBridge/DSB1@3/IOPCI2PCIBridge/UPS0@0/IOPCI2PCIBridge/pci-bridg e@0/IOPCI2PCIBridge/pci11c1,5901@0/AppleFWOHCI/IOFireWireController/IOFireWireDe vice@d04b930f05b1aa/IOFireWireUnit/IOFireWireSBP2Target/IOFireWireSBP2LUN/com_ap ple_driver_Oxford_Semi_FW934_DSB/IOSCSIPeripheralDeviceNub/IOSCSIPeripheralDevic eType00/IOBlockStorageServices/IOBlockStorageDriver/LaCie d2 quadra Media/IOGUIDPartitionScheme/Super Duper@2
9/20/13 1:59:33.000 PM kernel[0]: BSD root: disk1s2, major 1, minor 7
9/20/13 1:59:33.000 PM kernel[0]: Kernel is LP64
9/20/13 1:59:13.041 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
9/20/13 1:59:33.000 PM kernel[0]: Waiting for DSMOS...
9/20/13 1:59:13.041 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
9/20/13 1:59:33.000 PM kernel[0]: macx_swapon SUCCESS
9/20/13 1:59:26.297 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
9/20/13 1:59:32.146 PM hidd[45]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
9/20/13 1:59:33.557 PM hidd[45]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
9/20/13 1:59:34.000 PM kernel[0]: BCM5701Enet: Ethernet address a8:20:66:3b:5a:ce
9/20/13 1:59:34.000 PM kernel[0]: AirPort_Brcm4331: Ethernet address 8c:2d:aa:36:58:9f
9/20/13 1:59:34.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
9/20/13 1:59:34.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished():
9/20/13 1:59:34.142 PM mDNSResponder[38]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
9/20/13 1:59:34.146 PM appleeventsd[51]: main: Starting up
9/20/13 1:59:34.187 PM coreservicesd[62]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
9/20/13 1:59:34.387 PM airportd[86]: _processDLILEvent: en1 attached (down)
9/20/13 1:59:34.907 PM com.apple.kextd[12]: Can't load /System/Library/Extensions/G13Joystick.kext - no code for running kernel's architecture.
9/20/13 1:59:34.908 PM com.apple.kextd[12]: Load com.driver.LogJoystick failed; removing personalities from kernel.
9/20/13 1:59:35.000 PM kernel[0]: createVirtIf(): ifRole = 1
9/20/13 1:59:35.000 PM kernel[0]: in func createVirtualInterface ifRole = 1
9/20/13 1:59:35.000 PM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff80246b3000
9/20/13 1:59:35.000 PM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
9/20/13 1:59:35.000 PM kernel[0]: Created virtif 0xffffff80246b3000 p2p0
9/20/13 1:59:35.000 PM kernel[0]: Previous Shutdown Cause: 5
9/20/13 1:59:35.000 PM kernel[0]: IOBluetoothUSBDFU::probe
9/20/13 1:59:35.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x828B FirmwareVersion - 0x0066
9/20/13 1:59:35.000 PM kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- this = 0xffffff8024898800 ****
9/20/13 1:59:35.000 PM kernel[0]: NVDAStartup: Official
9/20/13 1:59:35.000 PM kernel[0]: NVDAGK100HAL loaded and registered
9/20/13 1:59:35.000 PM kernel[0]: DSMOS has arrived
9/20/13 1:59:35.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- controller = 0xffffff8024898800
9/20/13 1:59:35.000 PM kernel[0]: [IOBluetoothHCIController][start] -- completed
9/20/13 1:59:35.000 PM kernel[0]: IOPPF: AppleIntelCPUPowerManagement mode
9/20/13 1:59:35.000 PM kernel[0]: [AGPM Controller] build GPUDict by Vendor10deDevice11a3
9/20/13 1:59:35.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
9/20/13 1:59:35.000 PM kernel[0]: NTFS driver 3.10 [Flags: R/W].
9/20/13 1:59:35.000 PM kernel[0]: NTFS volume name BOOTCAMP, version 3.1.
9/20/13 1:59:36.607 PM com.apple.SecurityServer[15]: Session 100000 created
9/20/13 1:59:40.486 PM mds[37]: (Normal) FMW: FMW 0 0
9/20/13 1:59:40.520 PM WindowServer[93]: Server is starting up
9/20/13 1:59:41.000 PM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
9/20/13 1:59:41.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
9/20/13 1:59:41.238 PM configd[17]: network changed.
9/20/13 1:59:41.238 PM configd[17]: setting hostname to "Macintosh.local"
9/20/13 1:59:43.000 PM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [796d,2301,0de1,0300,41e1,0000]
9/20/13 1:59:43.949 PM blued[54]: Read the UHE Info
9/20/13 1:59:43.949 PM blued[54]: Read version 2 info. Number of devices:3
9/20/13 1:59:43.949 PM blued[54]: Class of device: 0x2580
9/20/13 1:59:43.949 PM blued[54]: Device name: 'Richard Miller’s Mouse' length:25
9/20/13 1:59:43.949 PM blued[54]: Finished reading the HID data
9/20/13 1:59:43.949 PM blued[54]: Found a device with PID:0x030d VID:0x05ac
9/20/13 1:59:43.950 PM blued[54]: Class of device: 0x2540
9/20/13 1:59:43.950 PM blued[54]: Device name: 'Apple Wireless Keyboard' length:24
9/20/13 1:59:43.950 PM blued[54]: Finished reading the HID data
9/20/13 1:59:43.950 PM blued[54]: Found a device with PID:0x0255 VID:0x05ac
9/20/13 1:59:43.950 PM blued[54]: Class of device: 0x2594
9/20/13 1:59:43.950 PM blued[54]: Device name: 'Richard Miller’s Trackpad' length:28
9/20/13 1:59:43.950 PM blued[54]: Finished reading the HID data
9/20/13 1:59:43.951 PM blued[54]: Found a device with PID:0x030e VID:0x05ac
9/20/13 1:59:44.135 PM stackshot[27]: Timed out waiting for IOKit to finish matching.
9/20/13 1:59:44.354 PM com.apple.SecurityServer[15]: Entering service
9/20/13 1:59:44.375 PM systemkeychain[72]: done file: /var/run/systemkeychaincheck.done
9/20/13 1:59:44.382 PM configd[17]: network changed: DNS*
9/20/13 1:59:44.384 PM mDNSResponder[38]: D2D_IPC: Loaded
9/20/13 1:59:44.384 PM mDNSResponder[38]: D2DInitialize succeeded
9/20/13 1:59:44.423 PM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
9/20/13 1:59:44.434 PM awacsd[55]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
9/20/13 1:59:44.436 PM awacsd[55]: InnerStore CopyAllZones: no info in Dynamic Store
9/20/13 1:59:44.436 PM netbiosd[94]: Unable to start NetBIOS name service:
9/20/13 1:59:45.489 PM loginwindow[41]: Login Window Application Started
9/20/13 1:59:45.617 PM locationd[42]: NOTICE,Location icon should now be in state 0
9/20/13 1:59:45.658 PM digest-service[114]: label: default
9/20/13 1:59:45.658 PM digest-service[114]: dbname: od:/Local/Default
9/20/13 1:59:45.658 PM digest-service[114]: mkey_file: /var/db/krb5kdc/m-key
9/20/13 1:59:45.658 PM digest-service[114]: acl_file: /var/db/krb5kdc/kadmind.acl
9/20/13 1:59:45.659 PM digest-service[114]: digest-request: uid=0
9/20/13 1:59:45.678 PM rpcsvchost[118]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
9/20/13 1:59:45.681 PM digest-service[114]: digest-request: init request
9/20/13 1:59:45.684 PM digest-service[114]: digest-request: init return domain: BUILTIN server: MACINTOSH
9/20/13 1:59:45.704 PM com.apple.usbmuxd[24]: usbmuxd-323 on Jul 29 2013 at 23:21:29, running 64 bit
9/20/13 1:59:45.742 PM apsd[57]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
9/20/13 1:59:45.743 PM apsd[57]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
9/20/13 1:59:46.000 PM kernel[0]: en1: 802.11d country code set to 'US'.
9/20/13 1:59:46.000 PM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
9/20/13 1:59:46.000 PM kernel[0]: MacAuthEvent en1 Auth result for: 00:24:56:c4:1d:21 MAC AUTH succeeded
9/20/13 1:59:46.000 PM kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
9/20/13 1:59:46.000 PM kernel[0]: AirPort: Link Up on en1
9/20/13 1:59:46.000 PM kernel[0]: en1: BSSID changed to 00:24:56:c4:1d:21
9/20/13 1:59:46.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
9/20/13 1:59:46.000 PM kernel[0]: AirPort: RSN handshake complete on en1
9/20/13 1:59:46.790 PM configd[17]: network changed: v4(en0+:192.168.1.70) DNS+ Proxy+ SMB
9/20/13 1:59:46.799 PM configd[17]: setting hostname to "unknowna820663b5ace"
9/20/13 1:59:47.299 PM ntpd[109]: proto: precision = 1.000 usec
9/20/13 1:59:47.436 PM airportd[86]: _doAutoJoin: Already associated to “2WIRE871”. Bailing on auto-join.
9/20/13 1:59:47.442 PM airportd[86]: _doAutoJoin: Already associated to “2WIRE871”. Bailing on auto-join.
9/20/13 1:59:47.447 PM airportd[86]: _doAutoJoin: Already associated to “2WIRE871”. Bailing on auto-join.
9/20/13 1:59:49.151 PM configd[17]: network changed: v4(en0:192.168.1.70, en1+:192.168.1.71) DNS* Proxy SMB
9/20/13 1:59:49.160 PM UserEventAgent[11]: Captive: en1: Not probing '2WIRE871' (protected network)
9/20/13 1:59:49.163 PM configd[17]: network changed: v4(en1!:192.168.1.71, en0) DNS! Proxy! SMB
9/20/13 1:59:49.174 PM configd[17]: setting hostname to "unknown8c2daa36589f"
9/20/13 1:59:56.116 PM apsd[57]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
9/20/13 1:59:59.812 PM awacsd[55]: Exiting
9/20/13 2:00:33.967 PM configd[17]: InterfaceNamer: timed out waiting for IOKit to quiesce
9/20/13 2:00:33.967 PM configd[17]: Busy services :
9/20/13 2:00:33.967 PM configd[17]: iMac13,2 [1, 85121 ms]
9/20/13 2:00:33.967 PM configd[17]: iMac13,2/AppleACPIPlatformExpert [1, 85105 ms]
9/20/13 2:00:33.967 PM configd[17]: iMac13,2/AppleACPIPlatformExpert/PCI0@0 [1, 85082 ms]
9/20/13 2:00:33.967 PM configd[17]: iMac13,2/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI [1, 85064 ms]
9/20/13 2:00:33.967 PM configd[17]: iMac13,2/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP03@1C,2 [1, 85063 ms]
9/20/13 2:00:33.967 PM configd[17]: iMac13,2/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP03@1C,2/IOPCI2PCIBridge [1, 85058 ms]
9/20/13 2:00:33.967 PM configd[17]: iMac13,2/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP03@1C,2/IOPCI2PCIBridge/ SDXC@0,1 [!matched, 1, 85056 ms]
9/20/13 2:00:40.916 PM WindowServer[93]: Set a breakpoint at CGSLogError to catch errors as they are logged.
9/20/13 2:00:40.916 PM WindowServer[93]: IOKitWaitQuiet: (iokit/common) I/O Timeout
9/20/13 2:00:40.918 PM WindowServer[93]: Session 256 retained (2 references)
9/20/13 2:00:40.919 PM WindowServer[93]: Session 256 released (1 references)
9/20/13 2:00:40.924 PM WindowServer[93]: Session 256 retained (2 references)
9/20/13 2:00:40.925 PM WindowServer[93]: init_page_flip: page flip mode is on
9/20/13 2:00:41.511 PM WindowServer[93]: mux_initialize: Couldn't find any matches
9/20/13 2:00:41.523 PM WindowServer[93]: GLCompositor enabled for tile size [256 x 256]
9/20/13 2:00:41.523 PM WindowServer[93]: CGXGLInitMipMap: mip map mode is on
9/20/13 2:00:41.587 PM WindowServer[93]: WSMachineUsesNewStyleMirroring: true
9/20/13 2:00:41.587 PM WindowServer[93]: Display 0x042c0140: GL mask 0x1; bounds (0, 0)[2560 x 1440], 42 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model b005, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000b00500000000042c0140
9/20/13 2:00:41.588 PM WindowServer[93]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
9/20/13 2:00:41.588 PM WindowServer[93]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
9/20/13 2:00:41.593 PM WindowServer[93]: Created shield window 0x5 for display 0x042c0140
9/20/13 2:00:41.593 PM WindowServer[93]: Created shield window 0x6 for display 0x003f003e
9/20/13 2:00:41.593 PM WindowServer[93]: Created shield window 0x7 for display 0x003f003d
9/20/13 2:00:41.594 PM WindowServer[93]: Display 0x042c0140: GL mask 0x1; bounds (0, 0)[2560 x 1440], 42 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model b005, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000b00500000000042c0140
9/20/13 2:00:41.595 PM WindowServer[93]: Display 0x003f003e: GL mask 0x4; bounds (3584, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
9/20/13 2:00:41.595 PM WindowServer[93]: Display 0x003f003d: GL mask 0x2; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
9/20/13 2:00:41.595 PM WindowServer[93]: CGXPerformInitialDisplayConfiguration
9/20/13 2:00:41.595 PM WindowServer[93]: Display 0x042c0140: MappedDisplay Unit 0; Vendor 0x610 Model 0xb005 S/N 0 Dimensions 23.50 x 13.23; online enabled built-in, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1
9/20/13 2:00:41.595 PM WindowServer[93]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1
9/20/13 2:00:41.595 PM WindowServer[93]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1
9/20/13 2:00:41.649 PM WindowServer[93]: GLCompositor: GL renderer id 0x01022644, GL mask 0x00000007, accelerator 0x0000409b, unit 0, caps QEX|QGL|MIPMAP, vram 2048 MB
9/20/13 2:00:41.655 PM WindowServer[93]: GLCompositor: GL renderer id 0x01022644, GL mask 0x00000007, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
9/20/13 2:00:41.657 PM loginwindow[41]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
9/20/13 2:00:41.681 PM WindowServer[93]: Created shield window 0x8 for display 0x042c0140
9/20/13 2:00:41.681 PM WindowServer[93]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
9/20/13 2:00:41.695 PM launchctl[133]: com.apple.findmymacmessenger: Already loaded
9/20/13 2:00:41.712 PM com.apple.SecurityServer[15]: Session 100006 created
9/20/13 2:00:41.736 PM airportd[140]: _doAutoJoin: Already associated to “2WIRE871”. Bailing on auto-join.
9/20/13 2:00:41.748 PM hidd[45]: CGSShutdownServerConnections: Detaching application from window server
9/20/13 2:00:41.748 PM hidd[45]: CGSDisplayServerShutdown: Detaching display subsystem from window server
9/20/13 2:00:41.764 PM loginwindow[41]: Login Window Started Security Agent
9/20/13 2:00:41.781 PM locationd[141]: NOTICE,Location icon should now be in state 0
9/20/13 2:00:41.787 PM UserEventAgent[135]: cannot find useragent 1102
9/20/13 2:00:41.831 PM SecurityAgent[143]: This is the first run
9/20/13 2:00:41.831 PM SecurityAgent[143]: MacBuddy was run = 0
9/20/13 2:00:41.841 PM WindowServer[93]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042c0140 device: 0x10afbe110 isBackBuffered: 1 numComp: 3 numDisp: 3
9/20/13 2:00:41.866 PM SecurityAgent[143]: User info context values set for richard
9/20/13 2:00:42.081 PM loginwindow[41]: Login Window - Returned from Security Agent
9/20/13 2:00:42.083 PM loginwindow[41]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
9/20/13 2:00:42.102 PM loginwindow[41]: USER_PROCESS: 41 console
9/20/13 2:00:42.112 PM airportd[140]: _doAutoJoin: Already associated to “2WIRE871”. Bailing on auto-join.
9/20/13 2:00:42.148 PM com.apple.launchd.peruser.501[146]: (com.apple.gamed) Ignored this key: UserName
9/20/13 2:00:42.148 PM com.apple.launchd.peruser.501[146]: (com.apple.gamed) Ignored this key: GroupName
9/20/13 2:00:42.149 PM com.apple.launchd.peruser.501[146]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
9/20/13 2:00:42.152 PM loginwindow[41]: Connection with distnoted server was invalidated
9/20/13 2:00:42.156 PM distnoted[150]: # distnote server agent absolute time: 93.407915730 civil time: Fri Sep 20 14:00:42 2013 pid: 150 uid: 501 root: no
9/20/13 2:00:42.237 PM WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
9/20/13 2:00:42.257 PM WindowServer[93]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
9/20/13 2:00:42.382 PM coreaudiod[163]: Enabled automatic stack shots because audio IO is inactive
9/20/13 2:00:42.451 PM com.apple.launchd.peruser.501[146]: (com.apple.afpstat-qfa[181]) Exited with code: 2
9/20/13 2:00:42.451 PM com.apple.launchd.peruser.501[146]: (com.plexapp.helper[188]) Exited with code: 2
9/20/13 2:00:42.452 PM com.apple.launchd.peruser.501[146]: (com.plexapp.mediaserver[187]) Exited with code: 2
9/20/13 2:00:42.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=184[GoogleSoftwareUp] clearing CS_VALID
9/20/13 2:00:42.963 PM NetworkBrowserAgent[201]: Starting NetworkBrowserAgent
9/20/13 2:00:42.982 PM 1PasswordAgent[186]: Starting 1PasswordAgent 3.8.21 #32009 built Apr 24 2013 16:09:31
9/20/13 2:00:43.219 PM 1PasswordAgent[186]: Trying to load Localizable.strings [English] from the main bundle
9/20/13 2:00:43.222 PM 1PasswordAgent[186]: Cannot find English version, using English localization for Localizable.strings
9/20/13 2:00:43.314 PM com.apple.launchd.peruser.501[146]: (com.apple.mrt.uiagent[171]) Exited with code: 255
9/20/13 2:00:43.487 PM 1PasswordAgent[186]: reloadAllObjects
9/20/13 2:00:43.510 PM 1PasswordAgent[186]: Database (AGHtmlDatabase:file://localhost/Users/richard/Library/Application%20Support/1P assword/1Password.agilekeychain/) load time [Cache]: 0.014+0.001 (168 objects)
9/20/13 2:00:43.594 PM WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
9/20/13 2:00:43.777 PM WindowServer[93]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
9/20/13 2:00:43.805 PM WindowServer[93]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
9/20/13 2:00:52.292 PM locationd[213]: NOTICE,Location icon should now be in state 0
9/20/13 2:00:53.475 PM com.apple.time[149]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
9/20/13 2:00:53.481 PM UserEventAgent[149]: rcdevent.plugin : IOHIDManagerOpen returned an error but continuing anyway.
9/20/13 2:00:53.965 PM com.apple.SecurityServer[15]: Session 100003 created
9/20/13 2:00:54.910 PM com.apple.time[149]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
9/20/13 2:00:55.441 PM timezoned[221]: bootstrap_look_up failed (44e)
9/20/13 2:00:55.448 PM timezoned[221]: bootstrap_look_up failed (44e)
9/20/13 2:00:58.800 PM Finder[162]: Persistent UI failed to open file file://localhost/Users/richard/Library/Saved%20Application%20State/com.apple.fi nder.savedState/window_1.data: No such file or directory (2)
9/20/13 2:01:02.147 PM com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[139]) Exit timeout elapsed (20 seconds). Killing
9/20/13 2:01:10.453 PM com.apple.SecurityServer[15]: Session 100002 created
9/20/13 2:04:41.788 PM hidd[45]: Timeout waiting for IOKit to be quiet
Maybe you are looking for
-
Trouble returning String from JNI method
I'm a JNI newbie who is going through the SUN online book on JNI and have put together the 2nd program example (right after "helloworld"), but it is not working right. It is supposed to prompt you for a string, then returns the string that you type i
-
Increase performance of Application
Hi Expert team, I am new in Apps field, Can you please tell me which are the files that purge on weekly / monthly basis to improve performance. waiting for reply. Thnaks Abdul
-
Error 3259, incomplete television episodes
I was downloading multiple episodes of South Park, and they all started stopping, with the error 3259 appearing (maybe 3252, I don't remember). I paused all downloads and then resumed a couple. Anyways, now in iTunes, for one of my episodes that was
-
GRC_DM_CC_SOD_PRM not populated
Hi, we have GRC 5.3 sp14 and all jobs have been scheduled correctly (risk analysis at permission level on roles and users + data mart). No errors on logs!!! If we look into data mart tables, GRC_DM_CC_SOD_ACT (actions) is filled but GRC_DM_CC_SOD_PRM
-
Hi I am doing export document fo this i done pricing procedure determintion as sales area, cust.pri., doc.pric., pricing. pro.,pricing ( 1000 02 11 O 1 ZEXP PR00 ) BUT hile ceating sales oder getting eror that no ricing proc. determ. & in note asking