Problems with a Canon eos T2i
I used my Canon T2i without problems for over a year and I am very pleased with it, but try taking days ago a video after have been taking pictures in program mode and the camera will lock and no picture could be taken, only appeared one minute later a pattern with vertical lines ... try removing the battery to see if it unlocked and nothing happened, every time I tried to take a photo red light indicates that the camera is processing, (acces lamp), remained continuously lit and not seen any photos. If anyone can help me solve this problem would be very grateful.
forgive me my bad english
i have this problem and a canon service centre took a look at it. They informed me that is would be a mainboard error. It needs to be replaced. Would cost me 250 euro's.
I took the camera home to think about it. After a few weeks i tried again and....it works fine. I could take pictures again. But when i tried movie it freezes again with the typical distortion on the lcd. Needs to reset by taking out the battery. After a few weeks it got the error again with taking pictures. Nothing helps. Tried to put it away 2 weeks but that did not resolve the problem.
i tried everything. Firmware, ML, other sd card's, lenses, and then i saw this possible solution for an error 70. Not my error but you never know.
--power down camera and remove battery
--power down HDMI device or powered adapter
--unplug the HDMI from the body, then plug it back in
--power up HDMI device or powered adapter
--insert battery and power up camera
and gues what. It works perfectly. NOT the video function. It's still freezes. But taking pictures is working for months now.
Before it would give the error when i stressed the camera with continuesly shooting at sports or something. Then it became slower en suddenly it would stop and give error 80. And now i can do what i want. It keeps working.
It's worth i try?!
Similar Messages
-
Problems with Viewing Canon EOS Rebel t1i Raw Files in Adobe PS and Bridge CS 4
I am unable to preview the thumnails of my raw files from my Canon EOS Rebel T1i camera in Adobe Photoshop or Bridge (CS4)? I've looked everywhere for a plugin? Am I unable to view these files in these programs. Please help. Thanks!
You prolly need to update the installed Camera Raw plug-in...See the Camera Raw product page for more info on downloading and installing an update.
-
How to handle an unsupported RAW format (Canon EOS T2i/550D)
I just got the Canon EOS T2i Digital Rebel today. I wasn't expecting Aperture to support its RAW files yet and it doesn't. My plan is to shoot RAW + JPEG until RAW support arrives. I've noticed some strange things happening during import. At first only a few files showed up in the import window. Checking/unchecking the import duplicates box did nothing. Eventually somehow all the photos showed up. I couldn't tell you what I did that made any difference.
The camera writes separate CR2 and JPG files to the card. The first time I imported I set the RAW + JPEG Pairs setting to "Both (JPEG as Master)". For some reason only the CR2 was imported and as expected it showed the unsupported icon. I couldn't see any JPEGs. I did the import again and now all the files are there but the CR2 and JPEGs are not linked in any way. I guess I don't understand how this should work.
Does anyone have any experience with RAW+JPEG shooting?On a retry, the import seems to be working correctly with RAW + JPEG pairs. The first time I tried this I was using an SD card formatted and used (with images on it) from a Canon EOS T1i. Maybe that was confusing Aperture.
I formatted the card with the T2i, reshot some images and re-imported with the setting of Both (JPEG as Master). The imported images have the "J" badge which means RAW + JPEG pairs with JPEG as master. If there was an "R" badge it means the RAW file is the master. When you right click the images there's a new menu entry for "Set RAW as master". Selecting that menu item shows the RAW file with the unsupported image icon.
Once Apple delivers RAW support for the T2i I can just select the "Set RAW as master" menu item to start using the RAW file. -
How do I import RAW images from my Canon EOS T2i camera into Aperture and have them show up as RAW images and not jpeg images?
See the list of supported raw formats:
http://www.apple.com/aperture/specs/raw.html
The footnote ** for the cameras EOS Rebel T2i EF-S / 550D / Kiss X4** says, that the raw format is only supported with Aperture 3. So you will have to upgrade to Aperture 3, to be able to import the raw from from your camera.
Regards
Léonie -
When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?
Crop to the print size before pringing
LN -
Hi I have a question about shooting in Raw with my Canon EOS 6d.
I'm in the process of learning photography and my goal was to start shooting in raw.
I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
HeatherIn researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost.
It all depends on your preferred workflow and your budget.
Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
Camera raw, DNG | Adobe Photoshop CC
Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
Creative Suite 6
Or join the Cloud and pay the monthly fee
Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR -
Is anyone else having problems with the Canon Online Store?
In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store. They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
Is anyone else having problems with the Canon Online Store?
Why does Canon not care to track reported problems with the storefront part of their web-site?
I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far. Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not. In trying to register that lens, I looked up on the Canon web site where to find the serial number. Since my new lens did not have any numbers there, I was concerned I had been sold a fake. But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was.
Is Canon like that with other problems, as well? Or is their "batting" average better than my very limited experience?
I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral": EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)!
Regards and Thanks,
Calen
As an old friend used to always say,
"Keep Looking Up!"
CalenHi Danny. Thanks for replying.
I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years. And, yes, it is the latest version. Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT? WHEN did Canon STOP SUPPORTING Firefox?
I've been told that there are 2 pending orders in my account. Yet, I NEVER placed those orders! WHY CAN'T CANON SEE THAT THIS IS A PROBLEM???
Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place! But, maybe that's a bit too grown up of an answer for you!
"Award-winning" support??? And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS??? The OSTRICH?
Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
Thank you for your "prompt" attention to this matter!
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen -
is the camera connector kit compatible with the Canon EOS 350D digital camera, as I can get it to work
Check what you've got 'Communications' set to on the camera's settings - it needs to be 'Print/PTP', not 'Normal' 'Normal' to 'PTP' :
-
I have done a course in photography with my canon eos 1000D and have taught me to handle the raw camera , but not to install and funciione with .cr2 photos. I downloaded the trial version of photoshop cs2 and installed the latest camera raw ( 8.7) and even so will not let me open it. I tried to update photoshop with updates and has not served .
Unfortunately your software pre-dates the camera. But it is possible to download and install the free DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of Photoshop. DNG is just like CR2 with no loss of quality. (keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.7.1
Mac download (.dmg file) click here DNG Converter 8.7.1
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial -
Canon Flash 430EX 11 to go with my Canon EOS 70D camera with an 18-135mm lens.
I purchased a Canon Flash 430EX 11 to go with my Canon EOS 70D camera with an 18-135mm lens. The flash displays the icon confirming auto zoom only intermittenly and when it doesn't, twisting the camera zoom does not display on the flash screen. All batteries are charged and the flash is locked on to the camera.
Solved!
Go to Solution.I'm not entirely certain I understand your question. The 430EX II has can be put in a mode where it automatically follows the camera zoom (within limits... 24mm to 105mm) but you can ALSO put it into a mode where you manually control the flash zoom. If it's in the manual control mode then it will not automatically zoom.
It is important that the "wide" panel NOT be in-use (if you pull out and flip down the wide-panel then the flash will go to wide angle and will not zoom EVEN if it was in auto mode.)
Press the Zoom button, then use the - / + buttons to change the zoom.
When under manual control there's a black "M" icon which will appear next the word "Zoom". If the "M" is not present then it's in auto zoom mode.
Lastly... when you change the zoom on the camera lens, typically nothing will happen on the flash UNTIL you wake the system by doing a half-press of the shutter button. When the camera wakes up to meter and focus... that's when it adjusts the zoom on the flash head.
Tim Campbell
5D II, 5D III, 60Da -
I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"...... I then decided to try and reload the Canon printer drivers and for some silly reason I deleted the existing Canon printer drive. Now I cannot load them from the CD provided with the printer or from downloads through the Apple store. If anyone out there could help me I would be greatly appreciated......
These Canon printer/scanner drivers from Apple - http://support.apple.com/kb/DL899 - should work. The MP250 is listed on the support page. Try downloading and installing them.
Good luck,
Clinton -
Problem with my canon ir c3170i
when i print a letter type sheet with my canon ir c3170i printer in the office in landscape for both sides, it prints one side in one way and in the other side in the opposite way. i want to be able to print for both sides in the same direction, what cold be happening?
I FINALLY SOLVED THE PROBLEM. YOU CAN PRINT IN BOTH SIDES IN THE SAME DIRECTION IN LANDSCAPE IF YOU PUT IN THE Binding Location OPTION Short Edge (Left).
THANKS ANYWAY -
Trying to download my pictures to IPhoto with my new Nikon S6300 camera keep getting the message the file could not be imported as the file is unreconizable format. I had no problem with my old Canon camera. Please help
I am having the same problem which has happened very infrequently before. Generally it's one photo and happened when my battery died.
However today I tried to download six photos.
None would download including several others for a total of 21 that would not download.
Since I had just installed a new powered hub and added three new external 4T hard drives, I got concerned that it was the hub. Then got really worried that I'd have problems with the data I have been backing up.
However following this sequence of events, I've determined it's not the hub, but still don't know what is causing the problem.
(1) Put a fresh battery in the camera - same results
(1.5) Used a different port in the new hub - same results
(2) Put the card in the card slot in the back of my iMac - no problems except that one image I knew about last week. The six new images imported.
(3) Tried again using the cable - still same error
(4) Changed cables - my husband has the same camera - still same error
(4) Put the card in his camera with his cable - still same error
(5) Put the card in a card reader and used the same slot in the new hub - no problems - same one wouldn't import but message that there are no new photos to import.
(6) Moved the offending one image to the Trash while the card was in the card reader
(7) Put the card back into my camera and used my cable. iPhoto had no error and displayed the message there are no new photos.
Conclusion:
Not the camera
Not the cable
Not the hub
Must remove bad photo from the card
However, I have not had to do that before. I went through several imports on vacation when there was one bad image and just ignored it each time.
Any idea why this is happening now?
Thank you -
Problems with some Canon Raw files
I'm having a very frustrating problem and would be interested in seeing if anyone else has seen this.
I have images shot in raw with a Canon 1D Mk II. Some of the files cannot be rendered in Aperture - they show a gray thumbnail and the red "unsupported file format" display in Viewer. If I open the Library package and navigate to these files, I can view them fine in every other browser/converter - ACR, Capture One, DPP, iView Media Pro, Bridge.
Preview is also unable to view the image as I'd expect with the same error as Aperture.
I do know about the Photo Mechanic problem, but I don't use that app. It's not a firmware issue since I have images taken on the same day - some display some don't. I've tried importing multiple ways, making sure there is no metadata assigned, everything I can think of but no luck.
Even though most of my hair is already gray, I'd like to keep it if possible, but this has me ready to pull it out.
Any ideas?
Thanks much,
Jon CanfieldI shoot with a 1Ds and 5D and previously with a 1d and 20 . I have also seen this problem with 1D files and 1Ds files and I think it has to do with if the file had been opened in another raw converter and left with the raw adjustments in embeded. I say this because the files it gives me in grey are ones that I opened but didn't edit. I will try opening and saving in another software and then to bring back into Apeture, though the more I have to use PS CS, Bridge, DPP, or other package the less I think Aperture is going to provide a complete solution for me.
-
Problems with using Canon LiDE 210 and OSX 10.7.4
I am getting nowhere with installing the Canon LiDE 210 scanner software on my 2010 MBP. All I get when I try to scan is "insufficient memory". I can scan using Image Capture and with the trial VueScan software so the problem looks as if it is something to do with the Canon software or the way that it installs on the MBP. Has anyone else had a similar problem or can anyone suggest a fix? Many thanks
Hellooo, I realise this thread is a year old and yet I'm having some real difficulty, hopefully this will fall on someones ears...
Firstly I have a mac mini bought recently and running on Mountain Lion 10.8.3 I tried downloading what is apparently the most up to date drvier and mp navigator for use with the CanoScan LiDE 210 meaning, that both the driver and mp navigator are compatible with Mountain Lion. Here is the following link I used that was forwarded to me by Canon:
http://support-asia.canon-asia.com/contents/ASIA/EN/0100434402.html
http://support-asia.canon-asia.com/contents/ASIA/EN/0200153502.html
I install both of the downloads, plug in the scanner, and nothing... no noise, no beep nothing to say that it is on. I try and open the scanner through system preferences-printer/scanner-canoscan icon yet I am then presented with the message; "failed to open a session on this device"
Strange, I call canon back and they do not know what else to suggest apart from all the usual trouble shooting, the type that is very patronising and annoying... did you click the icon and press scan, did you click the install button after downloading the software... the sort of thing that might otherwise result in the beating, of ones own face with the phone
At the end of this call, and after forwarding me a couple more useless links to unworkable downloads they say that it must be the product, and that I should contact the seller for a replacement.
So I do, I contact Amazon, I get my replacement and voila, exactly the same problem.
I even try getting it going using my mbp which is on snow leopard, which means I can use the installation disc that it is packed with it, it makes a noise, it sounds like its turning on but then when I click "open scanner" ... nothing, no option to scan, no acknowledgement of the device other than the icon itself in system preferences.
Does anyone have any experience of this issue, does anyone know how I might resolve it?
Many thanks,
Jeff
Maybe you are looking for
-
I had my settings on Pacific time and should have been Central time. Now I've lost a lot of my yellow notes when it was changed to Central. I'm trying to go back in and retrieve the notes to no avail and have tried changing the settings on my Iphon
-
I called 888 442 4551 and when the recording told me to press any number its not working,
I called 888 442 4551 and when the recording ask me to press any number on dial pad its not working, means I can not make any choices,,,
-
Hello Sap gurus, Actualy our transaction goes from sales order to returns ie, ZSP- ZRE. now we have a reuirement we have to do the reverse process that is from ZRE- ZSP. How to do it Points will be rewarded Thanks Edie
-
Can't get to rescue and recovery
Okay I have been making some progress. I received this lenovo W500 wtih win7 pro 64 bit on a 320 GB SATA drive. I wanted to put an 256 GB SSD drive in so I created a rescue disk then backed up the partitions to my NAS. Then pulled the drive and t
-
I want to install an older version of OSX
I bought a used Mac Mini (Mid 2010) that has Mountain Lion installed. I want to erase the drive and reinstall Snow Leopard. How do I go about installing an older version of OSX?