Problems with a certain program for existing users
Hello,
We have problems with a third party software application. We have installed this software program on a terminal server (server 2003 32bit) and when we open this software with a existing user account the application crashes with the following entry in the
eventviewer:
Application Error 100
Faulting application ProTime.exe, version 4.1.0.9, faulting module msvbvm60.dll, version 6.0.97.82, fault address 0x000fd0d9.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
We have checked the eventlog on the server but the only error that we see is the application error 100 when we open the program. Also we checked the rights on the program's database and folders but that doesn't help either.
The last thing we did was;
- Installing the software on a brand new virtual server with server 2003 x86 (no other software installed)
- Installing the software on a new virtual machine with server 2008 r2 x64 (no other software installed)
The strange thing is when we change something in the compatibility mode setting for example run as windows xp then we can run the program just fine but when the user logs off and log on again it doesn't work until you change something at the compatibility
mode setting (doesn't mather which setting)
When we create a new domain user then the software works properly without any settings changed.
Any idea what could cause this problem?
Thanks
With kind regards,
Lars
Hi Jesper,
Sorry for the late response. We think so, atleast the software company says it is.
We should not use the compat. mode because the application is not working on server 2003 x86, server 2003 x64, server 2008 r2.
It is just really strange. Software company has no clue how to fix this problem and they say it is caused by the active directory because when we add a new user then the application starts properly. User accounts created a long time ago are not able to start
the application.
Similar Messages
-
Problem with downloading "Stanford Eclipse for Macintosh Users"
Hi, recently I tried to download Stanford Eclipse for Macintosh Users . The program downloaded but did not open. If you need any additional details, I would be happy to provide them. Thank you for the help!
Computer: Mac OS X 10.9.5
Stanford Eclipse Download: http://see.stanford.edu/see/materials/icspmcs106a/software.aspxThe link your professor provided only downloads, and does not install anything. Look for it in the Downloads folder. The folder they download is zipped, and it may un-zip automatically. They expect you to drag the unzipped 'Eclipse' folder to a location you find convenient.
The package it downloads is a fairly old 32-bit version for Mac OS X 10.5 or later. The link to the Eclipse developer site has newer versions including a 64-bit version if you have a Mac running 64-bit kernel or 10.8 or later.
AS Kappy suggests, executing eclipse.app should give you error messages that point out any deficiencies.
If you need java and are running 10.7.3 or later, oracle java is provided ONLY at this site:
http://java.com -
Problem with HP Buyback Program for buying Printer at special price
A HP Buyback Offer for printers is live till 31st October 2014 at this website:
h41201.www4.hp.com/AdLanding/in/en/89614
The issue is that the above link says : 'This offer is under review till 1st November 2014' and the link to register for the offer is not present.
How on earth can i possibly register for the offer and buy a new printer under exchange if they continue to review the offer after the offer itself expires??
This question was solved.
View Solution.I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Pb with populating newly added AD fields for existing users
Hello,
Let's say that we have version 10 of the AD process form pushed to production.
Then we decided to push version 11 of the AD process form, which now has 4 more fields, to prod.
For new users, we can see that the new fields are populated and the data flows down to AD.
But, how do things work for existing users with existing AD account?
How can we make the new fields appear in the process form of an existing user with old AD account that did not contain the new 4 fields.
Thanks
KhanhFVC or Form Version Control Utility is specifically designed for this purpose. Refer OIM documentation & also have a look at the following links:
http://download.oracle.com/docs/cd/E10391_01/doc.910/e10363/appc.htm
http://oim-iam.blogspot.com/2010/04/oim-fvc.html
Thanks
SRS -
How do you set default programs for all users when deploying Windows 8.1?
I have my Windows 8.1 image set up the way I want including the start screen, theme, etc. But how can I set the default programs for all users. Most of out computers are non-touch and I want the desktop apps (e.g. Windows Photo Viewer), not the store apps
to be the default for opening pictures, videos, etc. Can that be done?Great question, this has been bugging me too!
So, I did some research by using "Set Default Programs" app in Windows 8. Then I ran the super ProcMon.exe tool from Sysinternals.com <Thanks Mark!>
After filtering out the junk, I could see some *interesting* writes to the registry:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.jpg\UserChoice]
"Hash"="57y87/ogggU="
"ProgId"="PhotoViewer.FileAssoc.Jpeg"
But the "Hash" part had me concerned. I did some internet searching for the hash, and came across a post and a pointer to a blog with some answers. This is both good news and bad.
Background:
One of the problems with Windows XP is that any program can come in and party on the entire system. No, I don't want you to put a shortcut on the desktop, install a crappy IE Toolbar, and change the default file association for *.jpg files to your app, I
just wanted to play a stupid game. Since Windows 7, Microsoft has been attempting to block that functionality from the stupid applications, and give them back to the user. Take note of the last line in the ITaskbarList3 interface:
Applications cannot programmatically pin themselves to the taskbar. That functionality is reserved strictly for the user.
Of course that sucks for us IT Pros who may wish to create *default* working environments for corporate images, but there are some tricks we can do.
Solution:
This blog appears to have the answer:
http://blogs.technet.com/b/mrmlcgn/archive/2013/02/26/windows-8-associate-a-file-type-or-protocol-with-a-specific-app-using-a-gpo-e-g-default-mail-client-for-mailto-protocol.aspx
New for Windows 8 is a dism command: /Get-DefaultAppAssociations that allows you to export a control case from a known good computer. Microsoft the supports importing the exported xml file via GPO. For example, before I changed the file association, .AVI
was pointing to the Modern App, after the change the /export-DefaultAppAssociations shows change to the new app:
From:
<Association Identifier=".avi" ProgId="AppXhjhjmgrfm2d7rd026az898dy2p1pcsyt" ApplicationName="Video" />
To:
<Association Identifier=".avi" ProgId="VLC.avi" ApplicationName="VLC media player" />
I am still doing some investigation to see if a GPO is required, or if you can inject the association into a local user account. Also, if you do have some Modern Windows 8 Touch Tablets, it would recomend keeping most of the Modern App defaults in place,
perhaps seperate GPO's for Desktops/Laptops vs Tablets?
-k
Keith Garner - keithga.wordpress.com -
Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics. -
Problem with a wrapper program.
Hi all,
we are facing problem with a wrapper program,through which we are calling three different xml reports.
when we independently submit these xml reports thorugh front end .
All the three programs run successfully & gives the desired output.
but when we run this through wrapper program.
All ths three programs run successfully ,but don't give output,i.e. output file comes as blank.
when I 'VIEW DETAILS" on the SRS window, the only difference between the independent program & the report through wrapper program is the 'UPON COMPLETION..'part.
The 'UPON COMPLETION..'part. for the independent program shows the RTF Template Layout name ,while the program submitted through the wrapper program doesn't show the layout name.
i have registered all the three reports as XML REPORTS,while the wrapper program as "package_name.procedure_name" & 'TEXT' as an output format.
can anybody tell us , the problem??
thanks.Wow, that's a lot of work. This isn't any different than PL/SQL in the real Oracle world. Parameters are named or positional. Named input uses the assignment operator of =>. Positional takes them in order per the procedure/function signature. In SQL*Plus, do a desc on fnd_request (owned by apps) and tell us what the "default" column represents.
If you have been typing in all arguments, figure out how many times you've done that, how much time it took, multiply it by your hourly rate, and then tell your manager you owe your company that amount of money for having wasted so much time.
function submit_request (
application IN varchar2 default NULL,
program IN varchar2 default NULL,
description IN varchar2 default NULL,
start_time IN varchar2 default NULL,
sub_request IN boolean default FALSE,
argument1 IN varchar2 default CHR(0),
argument2 IN varchar2 default CHR(0),
argument3 IN varchar2 default CHR(0),
argument4 IN varchar2 default CHR(0),
argument5 IN varchar2 default CHR(0),
argument6 IN varchar2 default CHR(0),
argument7 IN varchar2 default CHR(0),
argument8 IN varchar2 default CHR(0),
argument9 IN varchar2 default CHR(0),
argument10 IN varchar2 default CHR(0),
argument11 IN varchar2 default CHR(0),
argument12 IN varchar2 default CHR(0),
argument13 IN varchar2 default CHR(0),
argument14 IN varchar2 default CHR(0),
argument15 IN varchar2 default CHR(0),
argument16 IN varchar2 default CHR(0),
argument17 IN varchar2 default CHR(0),
argument18 IN varchar2 default CHR(0),
argument19 IN varchar2 default CHR(0),
argument20 IN varchar2 default CHR(0),
argument21 IN varchar2 default CHR(0),
argument22 IN varchar2 default CHR(0),
argument23 IN varchar2 default CHR(0),
argument24 IN varchar2 default CHR(0),
argument25 IN varchar2 default CHR(0),
argument26 IN varchar2 default CHR(0),
argument27 IN varchar2 default CHR(0),
argument28 IN varchar2 default CHR(0),
argument29 IN varchar2 default CHR(0),
argument30 IN varchar2 default CHR(0),
argument31 IN varchar2 default CHR(0),
argument32 IN varchar2 default CHR(0),
argument33 IN varchar2 default CHR(0),
argument34 IN varchar2 default CHR(0),
argument35 IN varchar2 default CHR(0),
argument36 IN varchar2 default CHR(0),
argument37 IN varchar2 default CHR(0),
argument38 IN varchar2 default CHR(0),
argument39 IN varchar2 default CHR(0),
argument40 IN varchar2 default CHR(0),
argument41 IN varchar2 default CHR(0),
argument42 IN varchar2 default CHR(0),
argument43 IN varchar2 default CHR(0),
argument44 IN varchar2 default CHR(0),
argument45 IN varchar2 default CHR(0),
argument46 IN varchar2 default CHR(0),
argument47 IN varchar2 default CHR(0),
argument48 IN varchar2 default CHR(0),
argument49 IN varchar2 default CHR(0),
argument50 IN varchar2 default CHR(0),
argument51 IN varchar2 default CHR(0),
argument52 IN varchar2 default CHR(0),
argument53 IN varchar2 default CHR(0),
argument54 IN varchar2 default CHR(0),
argument55 IN varchar2 default CHR(0),
argument56 IN varchar2 default CHR(0),
argument57 IN varchar2 default CHR(0),
argument58 IN varchar2 default CHR(0),
argument59 IN varchar2 default CHR(0),
argument60 IN varchar2 default CHR(0),
argument61 IN varchar2 default CHR(0),
argument62 IN varchar2 default CHR(0),
argument63 IN varchar2 default CHR(0),
argument64 IN varchar2 default CHR(0),
argument65 IN varchar2 default CHR(0),
argument66 IN varchar2 default CHR(0),
argument67 IN varchar2 default CHR(0),
argument68 IN varchar2 default CHR(0),
argument69 IN varchar2 default CHR(0),
argument70 IN varchar2 default CHR(0),
argument71 IN varchar2 default CHR(0),
argument72 IN varchar2 default CHR(0),
argument73 IN varchar2 default CHR(0),
argument74 IN varchar2 default CHR(0),
argument75 IN varchar2 default CHR(0),
argument76 IN varchar2 default CHR(0),
argument77 IN varchar2 default CHR(0),
argument78 IN varchar2 default CHR(0),
argument79 IN varchar2 default CHR(0),
argument80 IN varchar2 default CHR(0),
argument81 IN varchar2 default CHR(0),
argument82 IN varchar2 default CHR(0),
argument83 IN varchar2 default CHR(0),
argument84 IN varchar2 default CHR(0),
argument85 IN varchar2 default CHR(0),
argument86 IN varchar2 default CHR(0),
argument87 IN varchar2 default CHR(0),
argument88 IN varchar2 default CHR(0),
argument89 IN varchar2 default CHR(0),
argument90 IN varchar2 default CHR(0),
argument91 IN varchar2 default CHR(0),
argument92 IN varchar2 default CHR(0),
argument93 IN varchar2 default CHR(0),
argument94 IN varchar2 default CHR(0),
argument95 IN varchar2 default CHR(0),
argument96 IN varchar2 default CHR(0),
argument97 IN varchar2 default CHR(0),
argument98 IN varchar2 default CHR(0),
argument99 IN varchar2 default CHR(0),
argument100 IN varchar2 default CHR(0))
return number; -
Problem in creating new versions for existing DIR using CV01N
I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.BThere is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110. "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
+**EXPORTING**+
+**is_draw = ls_draw**+
+**TABLES**+
+**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B -
Problem with downloading certain presentations,indicatior is not active
Dear Suppot Team.
I have problem with downloading certain presentations, to see the problem please go to www.oriflame.co.uk > login> use my id number 3086445> password> 290883> click on opportunity presentation> and try to download the presentation, indicatior is not active, I tried in safari and it's working fine. Please have a look and thank you for your effort. Could you please write to me back at [email protected]?
Kind regards. AlexHi,
you have posted the records in the R/3 side.
But the V3 jobs have to run for the records to be available for the delta in RSA7.
Once your postings are done.The V3 jobs are scheduled,mostly it runs on an hourly basis.
This is what loads these new records to RSA7..
Wait for a while until the V3 jobs run.then Check RSA7 if there are any LUWs then run your delta ..it should pick records.
Regards,
Savitha -
Problem with my itunes program
i have a ipod shuffle and i have a big problem with my itunes program, he refuse to read cd so i cant put music on my ipod anymore. please help me with that cause now my ipod has become completly unusable.
Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Problemas with file "ns_emails.xml" for SMTP EXCHANGE
Hi,
I have problems with my ns_emails configuration for a SMTP EXCHANGE Mail Server.
I configured Outlook with this parameters and works: Autenthication: yes, SSL: yes, port: 25, host: gmail.smtp.com.
In my BPEL process is a right msg, but the email doesn`t arrive:
<2008-01-27 19:19:51,781> <INFO> <default.collaxa.cube.services> <Utils::initNotificationMode> Notification via voice, fax, SMS, IM or pager will be sent. Emails will be sent with the current settings. If you would like to enable them, please configure accounts in ns_iaswconfig.xml and then set the NotificationMode attribute in ns_emails.xml to either NONE, EMAIL or ALL.
Please, ¿do you see something wrong with this file?
<EmailAccounts xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"
EmailMimeCharset=""
NotificationMode="EMAIL">
<EmailAccount>
<Name>Default</Name>
<GeneralSettings>
<FromName>Laura</FromName>
<FromAddress>[email protected]</FromAddress>
</GeneralSettings>
<OutgoingServerSettings>
<SMTPHost>smtp.gmail.com</SMTPHost>
<SMTPPort>25</SMTPPort>
<AuthenticationRequired>true</AuthenticationRequired>
<UseSSL>true</User>
<UserName>[email protected]</UserName>
<Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">mypass</Password>
</OutgoingServerSettings>
</EmailAccount>
</EmailAccounts>
Thanks,
LauraHi,
I know about domain.log file. In my first post, I put the message that I get.
The problema is with the SMTP Exchange MS Server.
I tried with a Local Mail Server with this parametes and its right.
<GeneralSettings>
<FromName>Laura Garcia</FromName>
<FromAddress>testuser@lgrico-port</FromAddress>
</GeneralSettings>
<OutgoingServerSettings>
<SMTPHost>lgrico-port</SMTPHost>
<SMTPPort>25</SMTPPort>
<UserName>testuser@lgrico-port</UserName>
<Password>laura</Password>
</OutgoingServerSettings>
But with this configuration its wrong:
<OutgoingServerSettings>
<SMTPHost>smtp.gmail.com</SMTPHost>
<SMTPPort>25</SMTPPort>
<AuthenticationRequired>true</AuthenticationRequired>
<UseSSL>true</UseSSL>
<UserName>[email protected]</UserName>
<Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">pass</Password>
</OutgoingServerSettings>
My company has the same kind of mail server than gmail, so I,m trying to configure this first.
This is domain.log and it`s right, I can´t see where is the problem.
<2008-01-29 09:26:05,006> <INFO> <default.collaxa.cube.services> <Utils::initNotificationMode> Notification via voice, fax, SMS, IM or pager will be sent. Emails will be sent with the current settings. If you would like to enable them, please configure accounts in ns_iaswconfig.xml and then set the NotificationMode attribute in ns_emails.xml to either NONE, EMAIL or ALL.
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Creating connection pool for java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory initial size 20
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Fetched a queue connection from pool java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory, available connections=19
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start of send(type,caller,message) type = email caller = BPEL
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Notification ID 50d528357d42a957:-4d67d6df:117c49fc103:-7fcf
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start Persisting notification in database
<2008-01-29 09:26:05,100> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> End Persisting notification in database
<2008-01-29 09:26:05,100> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start of send(type,caller,message)
<2008-01-29 09:26:05,100> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Released queue connection to pool java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory, available connections=20
Thanks for your answers,
Laura -
I have problem with all downloaded programs all the sudden, keynote, pages and adobe reader. what could be the reason and solution?
There is no Adobe Reader for the iPad.
You're going to have to be much more specific to get help - what kind of problems are you having with the apps? -
Access Policy for Existing Users
Hi,
Here is the Scenario:
1. We have AD resource object having "Allow Multiple" Unchecked
2. We have Users who are already provisioned to AD
We are trying to introduce Auto Provisioning into our system for AD, I know new users will be evaluated against Access policies and will be provisioned to the resource and hence groups management will be taken care automatically, Questions:
1. If I disable resources (and not revoke) for these new users what will be the group membership status -will they be removed from group?
2. How to pull existing users under this auto prov umbrella? My thoughts: by writing a custom scheduler that will check resource provisioned and make it as part of the group, but will resource be revoked automatically if group is removed for these users? If not what should be the approach for existing users?
Thanks in advanceI've completed a similar tasks using SQL.Take a look at the following table and you can do these tasks:
UPP, UPD, USG, POG and AD group table 'UD_ADUSRC' -
Problem with naming certain people in Faces
When I am using the Faces feature of Aperture 3, I have a problem with naming certain people. In particular, if I want to name someone "Tommy", I type a "T" but instead a "D" appears. If I type a "T" again then the correct letter will appear but the first letter will always be a "D" if I press "T". So when I type "Tommy" on my keyboard I see "Dommy" instead. Does anybody else have this problem?
Yes. I thought it was because I had originally changed someone's name (Tave to Dave) and it still picked up old first letter. Workaround is typing two T's then erasing the first incorrect one. But appears we have a bu.
I have other issues too. I have many Dave's and Jim's and I can't figure how to tell which one is.
Maybe someone can remind us how post a bug report. -
Problem with a compiled program
Hello,
I have a problem with a compiled program on labview 6i.
This program used a serial port (COM1 or COM2).
During the launching of the ".exe ", a fatal error occurs.
Here this error:
=> APPLICATION caused an invalid page fault in
=> module LVRT.DLL at 0167:30164426.
Can somebody help me?
Regards
CedricCedric,
This problem was fixed in the LabVIEW 6.0.2 update. You can download this update (along with the updated runtime engine) from our website.
Good luck with your application, and have a pleasant day.
Sincerely,
Darren N.
NI Applications Engineer
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Maybe you are looking for
-
Need help with a Asus 27" monitor with webcam problem.
Need help with a Asus 27" monitor I bought. Model VK278Q. The issue is that the webcam will not work properly. Various applications can see the webcam, but I just get a black box. From what I have read, the issue seems to be that there are no off
-
How to calculate number of hour for projects
Hello Experts I got a table which has all the information about employee. I need to find the number of hours an employee worked on a project. Let say employee 'ABC' worked on 2 different projects. I need to find out how many hours he worked on each p
-
ORA-06550:: while provisioning a workspace request
Hello all, Using Application Express 3.0.0.00.20 on 10gR2 While trying to provision the request for a worksapce, its throwing this error Its missing a " ) " in the last but 4th line. ORA-06550: line 16, column 86: PLS-00103: Encountered the symbol ";
-
I changed the passcode on my ipad and cannot remember what I changed it to.... I've looked online for answers and tried everything. Help.
-
My Macbook Pro recently crashed (the operating system failed apparently). I believe I had OS 10.5 or something in that range.... I had Geek Squad back everything up and reinstall the OS, wiping the computer. I've since upgraded the OS to 10.6.8 (taki