Problems with a G580 which is still in warranty

Hello,
I bought this laptop in India, with accidental and international warranty, from The Do Store. Then I shifted to Frankfurt, Germany, for my higher studies. But before leaving I noticed that I had issues with the touchpad. I took my laptop to the Lenovo repair centre, where they said I have to leave my laptop for 2 days as the touchpad needs to be replaced. I couldnt do that since I had my flight next day.  
Now will the Frankfurt Branch of Lenovo replace this piece of hardware for me please? Also my laptop is incredibly slow, and hangs intermittently. The mouse freezes,  the keyboard works, but sometimes the keyboard also doesnt work meaning the whole system hangs.
Currently there is windows 8 installed on this laptop. I am not very pleased with it, so planning on switching to windows 7. Also that should be done after the touchpad is replaced or before that?
Also I owned a thinkpad previously, and had no issues with it for 5 years..
Is it possible that I can trade this model and exchange it for a thinkpad (by paying the overhead) within lenovo, example an exchange offer or something?
Looking forward to a swift reply 

No. Unless you have AppleCare+, in which case it will cost you $49. Accidental damage is NOT covered by the standard warranty.

Similar Messages

  • Facing problems with network due which the phone goes into hangs status

    Facing problems with network due which the phone goes into hangs status.  some one help me with switching between 2g and 3G network

    Hi Mani Nair,
    I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are talking about having issues with a 3G cellular data network, you may find the troubleshooting steps outlined in the following article helpful:
    iPhone cellular data connection issues
    Regards,
    - Brenden

  • Skype 6.11- I was thinking of downloading Maverick, but I am seeing that Skype is having problems with it. Is this still true. I am on snow leopard 10.6.8 now

    I was thinking of downloading Maverick, but I am seeing that Skype is having problems with it. Is this still true. I am on snow leopard 10.6.8 now

    Hi,
    I'm using Mavericks and there are no issues with SKYPE.
    I using SKYPE 6.9 and this version is working well without issue.
    For some reason I didn't downloaded SKYPE 6.11 I don't know why anymore ... but I'm sure I hat my reasons not to do so.
    Dimaxum

  • I had problems with my laptop which have now been fixed but I cant access my itunes account or download itunes

    I had problems with my laptop which have now been fixed but I am now unable to download or connect to my Itunes account through any of my devices?

    An iTunes account is nothing more than a login and password.
    The media is only where the user put it.  Restore the ENTIRE iTunes folder from the backup of the computer.

  • I'm having a real problem with my cursor which seems to have developed a mind of its own, zigzagging allover, highlighting things without my command, and basically making my MacBook unuseable (it's taken me half an hour just to compose this!).

    I'm having a real problem with my cursor which seems to have developed a mind of its own, zigzagging allover, highlighting things without my command, and basically making my MacBook unusable (it's taken me half an hour just to compose this!).

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
    3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    5. Reset the System Management Controller.
    6. If you're using a Bluetooth trackpad or mouse, investigate potential sources of interference, including USB 3 devices.
    7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • TS1702 When I backed up my ipad because I thought I had a problem with it in which I didnt, I went to restore my ipad and now some of my app that I had purchased are not there, the free version is on my Ipad and Icloud but not the purchased version?

    I thought I had a problem with my Ipad in which I didnt, so I backed up my Ipad and restored it, but now Some of my apps that I have purchased are not available only the free version, not the purchased version. I would have to purchase again and it is not backed up into my Icloud either ?

    I assume that you will have to set up as new since it will not let you restore from the backup. Then after you set it up, you can restore from the iCloud backup. The backup should not disappear be use you are setting this device up as new. Your backup should still be in iCloud.
    However, after you activate the iPd and update the software, you will have to erase the device in order to restore from the Cloud backup, that is the only way to get to the iCloud backup.
    Copied from the article that linked you to this discussion ....
    Resolution
    Update your device to the latest version of iOS to be able to restore the backup.

  • Problem with "Call Transaction" which calls a view cluster

    Hi Colleagues ,
    I have a rare issue with the call transaction , here is the use case for it :
    1> I call a transaction(calls a screen X) in a report ,
    2> I have a button in the screen , which calls another transaction(calls a screen X2) .
    3> On the screen X2 i have another button which calls transaction (calls the view cluster ).
    problem :
    i'm not able to see the navigation pane in the view cluster on the left. its missing .
    but when the view cluster is called direclty , i'm able to see the navigation pane in the view cluster ..
    My initial doubt was , is this the problem with nesting of 'Call Transaction' calls ????
    please answer the thread , i have to fix this ASAP.
    regards,
    Dilip

    problem solved.

  • Problems with time zones - my phone still switches to winter time

    I know that lots of Russian Apple customers experienced inconvenience with the switch to winter time (1 hour back) on the last days of October, because since this year president Medvedev decided that Russia should not get involved into that process, but all of the devices that were synced to the automatic time made a switch back. The problem isn't solved if you turn off the automatic timing option, because sms messages still appear in 1 hour difference. So if you get a message on 10 pm it is displayed as you got it on 9 pm, which makes a big confuse. I suppose that someone already posted a message about this problem, but all I found is to fix the file that rules the time zones manually by downloading loads of software. I am just a user and would not manage to do it by my self. I just can't figure out why Apple Inc, being such a trusted and wise company, still didn't make a solution for this embarrassing problem and didn't change their MAIN CLOCKS so all of the devices can easily synchronize with it, or, make new software for iPhones and iPads.
    So, what do we do now? Thank you!
    - Diana,
    Iphone 4
    Soft 4.3.5

    I did look at the other threads, but none of them quite matched what I'm seeing. As I said it used to work just fine for me and I only noticed a problem recently. Looking back it seems that timestamps have been off since the begining of 2011, but things look ok before then.
    Just for the info is this the first time you've imported in the same time zone you've shot in with the camera time set to another time zone? Just curious because Aperture does seem to take into account the machines time zone as well as the camera's and the shoot's location.
    As I mentioned in the post, my regular way was to shoot with camera set to EDT/EST and do a time zone conversion. I didn't have problems before this year. I would expect the OS timezone to be where I was shooting, but not neccessarily.

  • Problem with Flash-Parameter which include the letter 'E'

    Hi,
    we have embedded our Xcelsius-Dashboards in another 3rd-party-webportal.
    The user opens a dashboard via button in this webportal.
    The OpenDocument-URL contains one Falsh-Variable to control the display
    content according the appropriate user who has calling the dashboard.
    In some cases, the content of this Flash-Variable contains the letter "E".
    In such cases the problem is, that the Letter E will not appear in Xcelsius.
    That means, if we call the dashboard for example with the Flash-Parameter-Value "22E"
    via OpenDocument, in Xcelsius comes the Value without the letter "E" (in the case above "22").
    I also tried to use the hex-code of the letter "e" (%65) but this doesn't work.
    Has anybody a hint for us, how this letter can be sent to Xcelsius via OpenDocument?
    Sincerely
    Edited by: Sebastian Eckes on Apr 26, 2011 12:00 PM

    Check for malware infection. The names of these files really indicate the system is infected.
    Which version of Java client is installed? Especially older versions are very vulnerable against website or email based attacks.
    Since malware infections are very different, detailed support can hardly be given via forums.
    Best greetings from Germany
    Olaf

  • Problem with Java cache which makes the computer very slow.

    Hello!
    I think that Java has installed som code that creats problems to my processor when I am working with the computer.
    I have got the following wrong code: 0x805 8023 and the containerfile & file below:
    1) Containerfile C:\Users\Oskar\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\11\37a4040b-62415be5
    2) File C:\Users\Oskar\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\11\37a4040b-62415be5->cuumfrsmeyghklbvetb/bljwt
    hwbhkkbsywmtwjeqk.class
    Could you please help me to get rid of the problem?
    You can do it directly or give me the instructions by e-mail : [email protected]
    Thank you in advance
    Best regards

    Check for malware infection. The names of these files really indicate the system is infected.
    Which version of Java client is installed? Especially older versions are very vulnerable against website or email based attacks.
    Since malware infections are very different, detailed support can hardly be given via forums.
    Best greetings from Germany
    Olaf

  • Linksys M10 and Mountain Lion OS problems with Guest User - which router is best to upgrade to for Maverick and higher OS coming in fall?

    Since we upgraded our OS to Mountain Lion the Guest User on the Linksys M10 router isn't working.  Not compatible.  Which Linksys should one upgrade to for use with Maverick OS and the newer releases coming this fall and onward?

    Sorry - I have Maverick 10.9.4 and the guest user on the link sys M10 isn't compatible.  Any suggestions on which wifi router to upgrade to for newer releases of OS coming?

  • Problem with iphone 4,my phone still using ios 5 operating system and now it wont work ad tried to update it

    Help!!! My iphone is still using ios 5 operating system due to laptop issues and unvarnished able to update it,my husband has tried to update it and now its saying phone in recovery!  If I restore to original settings will i loose everything like music and photos??!!!!!

    Hi there Laura,
    Welcome to Apple Support Communities.
    It sounds like your iPhone is in recovery mode and you’re concerned about restoring it to factory settings because you don’t want to lose any data. The first article linked below provides a lot of great information about restoring an iOS devices to factory settings, including how to restore from any backups that you may have created with iTunes.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Also, if you want more information about recovery mode, take a look at the article linked below.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Cheers,
    -Jason

  • Hi, I have a problem with my Safari, which is annoying!

    whenever I open my safari, something pops out before i use the safari that says ( We’re sorry, but the Safari browser version you are currently using does not support the community toolbar.). It is very annoying. what should I do?
    Thank you..

    Something you installed or a website on one of your top sites is popping up a Javascript window.
    Many websites try to install junk on your machine, could be malware too, but mostly for Windows.
    Check your Safari preferences and turn off pop-up windows.
    Ideally, for the best browsing experience, you should consider Firefox with a persona, and the following add-ons: NoScript, AdBlock Plus, Ghostery, BetterPrivacy, NoSquint, Click2Clean, WOT, Theme Font & Size Changer, etc.
    NoScript offers a lot of protection, it turns off all scripts by default unless you click the button for that web page, also you can set sites on a whitelist. Keeps all that pop-up/under, malware, click jacks, web based attacks etc at bay.
    http://noscript.net/
    Firefox is highly customizable browser, right under the View>Toolbars is a Customization, which offers a lot of placement of menu bar items etc., make your browsing experience personal.
    Mac users who were using Firefox and NoScript didn't get hit by the MacDefender Trojan, but Safari Mac users did.

  • Problems with the universes, which based on Multiproviders

    Hello everybody,
    Prerequisites:
    SAP NetWeaver BI 7.0 (SAPKW70022) as data supplier
    WebI Rich Client (12.1.0.882) as reports implementation system
    Situation
    Universes, which based on Multi providers, when we refresh their structure marks all universes objects as inactive.
    In that time connection test is ok.
    If we try to refresh reports using WebI Rich Client - error "A database error occured. The database error text is: The supplied XML is not valid.  (WIS 10901)" is occurred.
    If we try to refresh the same reports using SAP BO InfoView - all is ok, data is refreshed.
    Also we try to activate multi providers, they are active without any mistakes.
    Restarting BO server also doesn't work.
    Nothing is wrong with universes, which based on BEx Queries.
    Regards, Igor

    Hi,
    try with below steps.
    1. Log in to Designer
    2. Open universe used in report
    3.  structure and parse objects
    4. re-export universe
    5. Open the Webintelligence report affected
    6. Hit the  "edit query" button
    7. Select the "properties" tab
    8. link to the new universe
    9. refresh report - no error message
    10. If the error message remains, save universe under a different name and re-export it following steps 4-9
    Thanks,
    Amit

  • I have problems with playing movies which are located on a Toledo learning platform. They open and play, however after some time the image goes completely blur, sound stays ok. Several movies have this problem, already checked with school movie is ok.

    so the movie opens and I will see movie + sound for several minutes, however then the image goes blur. School alraedy checked they do not have this problem. So probably it is a problem located on my macbookpro.
    Could someone please help me.
    Already installed latest version of adobe flash player and controlled my security settings of safari.
    How can I check that the movie seruly opens in adobe and for instance not in JW player?

    so the movie opens and I will see movie + sound for several minutes, however then the image goes blur. School alraedy checked they do not have this problem. So probably it is a problem located on my macbookpro.
    Could someone please help me.
    Already installed latest version of adobe flash player and controlled my security settings of safari.
    How can I check that the movie seruly opens in adobe and for instance not in JW player?

Maybe you are looking for