Problems with a HP Color LaserJet 2550Ln

Hello,
we try to print SAP Script Forms on a HP Color Laser Jet 2550. I found no exact matching driver or device type for this printer on the SAP Website.
On the printout all formatted text are scrumbled. All texts without a textformat and boxes are printed correct. Does someone else have the same problems with other color laser printers and how did you solve the problem ?
Thank you in advance.

Try HPLJ4000, HP2200. I think the printer also supports post script, try POST2 also.
Try HP provided device types close to your printer from the following website:
<a href="http://h71028.www7.hp.com/enterprise/cache/37011-0-0-224-121.html">http://h71028.www7.hp.com/enterprise/cache/37011-0-0-224-121.html</a>
Regards
Sridhar

Similar Messages

Problem with HP 3600n Color Laserjet Printer and new HP Notebook Running 64 bit Win7

I have a new HP notebook (dv7t-6100) with Core-i7 Processor, running 64 bit Windows 7 with all of the latest updates.
I also have a 27" iMac with Core-i7 Processor running 64 bit Windows 7 underneath Parallels 7. Parallels is a program that creates a virtual machine underneath Mac OSX.
Both versions of 64 bit Windows 7 work perfectly . . . EXCEPT, neither will print from my HP 3600n Color Laserjet. The iMac will print to the 3600n in OSX mode, and an earlier version of 32 bit Windows 7 under Parallels printed perfectly with this 3600n printer.
These facts prove that the printer is OK, the connection is OK. However, the 64 bit Windows 7 systems do not print.
In both of the 64 bit Windows 7 installs I allowed Windows to find and download the HP driver for this printer. Install of the driver was apparently successful. Still no printing.
One strange fact: Sometimes when I turn the computer off, the 3600n printer will print the items that had been in the queue before powering down. That is the only time it has printed anything . . . except under OSX on the iMac.
Does anyone know if there is a basic problem with 64 bit Windows 7 and this printer ?
Thanks for any help you can provide.

I just had the same problem with my MacBook Pro using 10.5.5 After trying a number of things, the following worked. (not sure what specifically ... just did this combination)
1. Had the Apple store Genius Bar folks install the latest HP drivers.
2. Restart computer
3. Restart the HP Color LaserJet 3600
4. Connected the HP printer and MacBook Pro directly into a switch, so the wireless was not an issue (both machines had IP addresses set and computer's was set to DHCP with manual IP).
5. Instead of using the System Preference printing and fax tool, I started Text Edit, typed something and said "print".
Print window came up and said "no printer selected"
6. I clicked on the drop down so it would look for printers.
7. It found the HP Color LaserJet 3600.
8. I clicked on the name of the printer and the computer went out and found the driver
9. I clicked on "Add" and it added the printer.
10. I tried a couple of test prints in different programs.
11. I disconnected the hard wired ethernet cables and set the computer to be on the wireless.
12. I printed a few more test prints in various programs.
I had previously tried selecting the printer and drivers through the System Preferences to no avail, but doing it this way worked.
Blessings

Problems with printing( hp Color LaserJet)

Printer HP Color LaserJet 1500L under Mac OS 10.4.2 Tiger refuses to work normally. It prints 1 or sometimes 2 sheets of paper and then it stops working. All other tasks just move from the active category into completed one without any printing. Printer's indicator starts to wink but then it stops and nothing more happens. The next printing begins only after switching the printer off and on or after restarting operation system. After this it prints 1 or 2 pages and everything begins again. We tryed to use standart drivers which were attached to the printer and the drivers which we downloaded from the HP official site. There is no difference. We tryed to connect the printer to another Macintosh computer under Mas OS X 10.4.2 but the problems didn't disappear. Also we tryed to change USB cable between the printer and the computer. It also didn't matter. Before it the printer worked under Windows XP normally without any problems.

Same printer, similar problems. I get stopped jobs that refuse to print even after I hit the start printing button. There is a message on this site tackling this issue for an Epson printer. Haven’t tried it out yet myself.
MacBook Pro Mac OS X (10.4.6)

E51 print with an hp color laserjet 2600n

Hi
I have a nokia e51, it can connect to my wi-fi but I have a problem with my Hp color laserjet 2600n. I try to create a unix print server on my pc that running windows xp, but it doesn't work. In particular the print receive the document in its queue bun doesn't start. I try a direct connection using the socket bearing but this attempt fail too.
Thank You for help.

Hi
I have a nokia e51, it can connect to my wi-fi but I have a problem with my Hp color laserjet 2600n. I try to create a unix print server on my pc that running windows xp, but it doesn't work. In particular the print receive the document in its queue bun doesn't start. I try a direct connection using the socket bearing but this attempt fail too.
Thank You for help.

HP Color LaserJet 2550ln printer displaying error massage

I was trying to print a page of tickets (6) containing graphics, but my hp color laserjet 2550ln printer printed a page with the following message:
ERROR: limitcheck
OFFENDING COMMAND: showpage
STACK:
(r)
( Sys / Start )
( Sys / Start )

Found this on the discussion posted 06-03-2010 01:55 PM It worked for me.
I just went through this fix yesterday. I can't remember where I found it on hp.com, though. Here it is:
Turn printer on.
On your printer, press the Menu button
Press 2 (on the fax dial pad)
Press the right arrow (next to Enter button) until you arrive at "High Speed USB.
Press Enter
Press right arrow to select "Off."
Press Enter.
Press Enter again.
Printer will then reboot. I used to get this error occasionally with Windows XP. I wish I would have taken the time to fix this a long time ago!

Printing PDF to HP Color Laserjet 2550Ln result in Red images

When printing PDF documents to my networked HP Color LaserJet 2550Ln, usually the embedded images are covered in a red hue. This was already the case with MacOSX 10.4, but still continues with Leopard 10.5.2, using Bonjour. Printing the same document (also using Bonjour) via a windows machine (Windows XP SP2) results in a perfect copy.
Anyone an idea of the cause of this behaviour?
Regards,
Gerard

This works for me, because I'm tired of waiting for Adobe to find solutions: open your pdf document with Preview and print from there. It will print cleaner and faster than any Adobe application.

Color problem with ProPhoto RGB color space

Hi, everyone,
I have wery special problem I think. I use MacBook pro 15" with retina display, adobe Photoshop CC and when I export RAW (from Nikon D7000) from Lightroom 5 to Photoshop with settings: 16 bit TIF, color space: ProPhoto RGB I have a problem with displaying the correct colors. As you can see in this picture:
My problem are some "green" artefacts in absolutely black and white picture. I tried myself to solve this problem and found the following facts: when I convert picture into Adobe RGB or sRGB color space is everything OK - without green artefacts.
But here is one important fact: I have calibrated monitor by datacolor spyder4elite and problem with ProPhoto RGB incorrect color displaying is only when the color calibration configuration is loaded. When I change my display calibration to standard apple color LCD profile than is everything OK.
But using uncalibrated monitor and also Adobe RGB color space are no right solutions for me.
My question is why I have problem with displaying ProPhoto RGB color space in photoshop under calibrated monitor profile and can anybody help me please?
Thanks for answers.

That's a classic example of the basic problem with 16 bit color. There is no solution that I know of.

How to avoid the page timeout with the HP Color LaserJet Enterprise CP4025?

We are using a DOS application developed with DB4 and running always on the same XP workstation. One month ago we changed our previous HP color printer (was broken) buying a newest CP4025. With the previous HP color printer, and also with another printer we have (HP Color LaserJet CP2025), our application works very well. But using the CP4025 now we have a problem.
When our application prints in PCL mode, sends the first part of job, then the application perform some calculation tasks with the database and sends the final part after about 30 seconds. We don't know why, but the CP4025 seems to have a timeout after about 15 seconds that cause closing the printing job with a sort of end of page, printing wrongly a half page, and after a new page with the second half of the real single page.
Why the CP4025 have a so short timeout? Our previous HP and also the CP2025 works well with our application, without perform any kind of short timeout.
Anybody knows how is it possible to avoid this timeout with the CP4025?

In theory PCL5 jobs should only be terminated and forced to finish printing via either an IO timeout, the network connection being closed, or an end of job command in PCL5.
You can check/change the default IO timeout value through the front screen. You'll find it by navigating to Configure Device->I/O->I/O Timeout. I would recommend making sure it is set to something around 120 seconds.
Do you know whether the application itself is generating the PCL5 job, or whether it is going through a print driver to generate the job?
I work for HP

Problem with Display,The color of display washed out!!!

i got problem with the screen. the color around corner of display and 6 rounds circle spot in middle of display, it looks like washed out( become white) when i view it on black background it looks more stand out. What can i do now? i only have Iphone 4s on 24/10/11

BBMX_777 wrote:
The Apps that not show the version number are all, for example, BlackBerry Messenger, Notes, BrickBraker, etc..
There is a way to restore the device's OS?
Interesting problem...I would agree that the OS likely needs to be reloaded..see this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Printing problems (PDF files-HP Color Laserjet 1518ni: return the printer?

Hi everyone, I recently switched platforms and became a Mac user and had to buy a new
printer because my old HP deskjet is not compatible with my computer. So, I bought an HP
Color Laser printer, supposedly Mac compatible, but every time I try to print a PDF file it only
prints the first page. And then stops printing. I spent hours with the HP customer service, reinstalled
the driver, changed configurations, but it still does the same thing. The customer service representative could not solve the problem. I was wondering if there is any one else who had a similar issue with printing? Is it Mac OS X 10.5.5 that causes the problem? I am about to return the laser printer; it would be so helpful if I got some feedback. If it is a printer issue, then, which printer would you folks recommend that is not too expensive but efficient (I use the printer a lot and need an efficient one) and a printing speed of around 12-20ppm that actually does work with the Mac?
Thanks in advance!
Asli

Asli Igsiz wrote:
Thank you for calling my attention to the Adobe issue. I did try and print a PDF file with Preview and it worked! How was the issue solved with Adobe 7? Maybe Adobe pro7 also similar bug issues; is it to Adobe that I should be reporting this or to Apple?
Thanks again.
It's definitely an Adobe problem. The only solution I ever saw was either to print from Preview or to use later versions of Adobe Reader 8 or any version of Reader 9. I asked Adobe support what the problem was. I never got a reply.
You should know that Preview (and any other application which reads PDFs using Apple's PDF engine) has a problem with displaying Times Roman Italic, and only Times Roman Italic when launched under OS X 10.5.5. All other fonts appear to work normally; at least I haven't found one which has a problem, including other Times Roman font faces, including Times Roman Bold Italic. Preview seems to print properly, but the on-screen display has problems. The same files display properly with apps which don't use Apple's PDF engine, and also with apps which use Apple's PDF engine under versions of the OS earlier than 10.5.5, going back to at least 9.2.1. Apple is aware of the problem.
There seems to be at least two problems with the main PDF engines for OS X, Apple's and Adobe's.

Problems with CMYK/LAB colors

I'm independent and I send many print jobs to different print shops. I recently discovered to my horror that some color critical jobs have gone to press (to the same shop) with mismatched PMS colors. At first I blamed the print shop but they complained the CMYK values did not match. When I opened the two brochures in question, one had (for example) Pantone 288 C, color type spot, Color mode CMYK, 100/67/0/23 (dimmed because the colors came from an imported illustrator eps logo). The second (bad) brochure had the same color and color type, but in the mix it had Color Mode: Lab, L 8.039, a 8, b -50 - greyed out because again, the color came from the SAME eps file.
My next step was to remove the logo file from the bad Indesign doc. Then I doublechecked the color - success, the color now says color mode: Pantone solid coated, 288 C (which is from the built-in indesign swatch book). Then I brought BACK IN the logo file from the brochure that printed correctly. The color reverts back to LAB again!
When I import this same logo into a blank document, the colors are fine (CMYK with proper values).
I'd seen in other forums suggestions to check or uncheck "Use Standard Lab Values for Spots" in the Ink Manager, however both documents have this unchecked. (Adobe seems to encourage checking LAB but I've never done this, I'm afraid to start now as it will probably give my print shops fits.) And both have "convert spots to process" checked, which I always thought was the cure-all: shouldn't PMS 288 (CMYK) always be PMS 288 (CMYK), as long as both are converted to process? Why would one being a LAB and the other NOT being a LAB make them different? 288 should be 288....? (but I guess not....)
The good news is, the Zevrix extension "InPreFlight" will warn me if run on each document, so I don't have to drive myself crazy opening old files and doubleclicking every color. But I'm wondering what the heck is happening.
CLUE: I believe this all stemmed from a "brilliant" idea I had to shorten the list of color types to choose from by going into Indesign>Presets>Swatch Libraries and removing libraries I'd thought I wasn't using - I left all my Pantones, but I must have deleted an important one, because it was after I'd done this that I had noticed the Lab colors rearing their ugly heads. However it didn't occur to me that LAB (CMYK) would be different from regular CMYK since they have the same name. When I replaced this folder with one from another mac, viola, the problems stopped. However it doesn't stop the old, previously created files from continuing to open wrong and be printed wrong, if I don't catch them.
Any insight anyone could provide would prove most helpful. It would be nice to get a night's sleep for a change.....thanks!
FYI I'm using Indesign CS3 5.0.4 (recently updated) with Color Settings CMYK: U.S. Sheetfed Coated v2 and color management policies-preserve numbers (ignore linked profiles).

>one had (for example) Pantone 288 C, color type spot,
Mike, you are implying in your post that your jobs are being output as CMYK, but your colors are set as spots. If that's the case your printer is converting the spot colors to process CMYK, which would cause the problem you are describingPantone Solid colors are converted to CMYK via color management when Use Lab is checked. The resulting output values would depend on the document's destination CMYK profile.
If your job is indeed CMYK you should stop using the Pantone Solid library and use the Solid to Process library instead, which always output as Pantones CMYK builds.
Use Lab is useful when a job is to be output as Spot color because you will likely get a more accurate preview of the color and a better proof to a composite printer. Many Pantone colors are out of the CMYK gamut. Lab can also be useful if you are sending a job to CMYK and you want to color manage the conversion of a solid color to CMYK, rather than using Pantones built formulas which are device dependent.

Problem with printing true colors

Had PSE7 and colors printed true and beautiful. Upgraded to PSE10 and all of a sudden colors printed muddy and dull with purplish overcast. Took printer in for service but problem persisted. Upgraded to PSE11 and once again colors were printing true and beautiful for over a year. Printed a card about 5 days ago using PSE11 - beautiful. Printed a card yesterday using PSE11 and colors muddy and dull with purplish overtones. Installed PSE13 and colors printing dull, muddy with purplish overcast.. I feel it is a problem somewhere in settings of PSE, but can't figure out where. I don't think it is a problem with printer. Both printer and PSE set to Adobe RGB. Color control set to optimize for printer. Using PC with Windows 7, 64 bit. Printer is Epson stylus photo 1400. Thanks for any help, Merrie

See if this helps:
http://helpx.adobe.com/photoshop-elements/kb/color-management-settings-best-print.html

Problem with Adobe Illustrator color

I am using Illustraot 6.5 on my iMac G5, and for the most part it works well. But today I have an unusual problem.
A few days ago I was running some test prints of an Illustrator document (with a color photo), and in order to conserve color ink, under Print=>Color
I chose "Print Colors in Black" rather than "Color" under the "Composite" section. This produced a garish green/black look on the color photo I was printing. Which was fine for my tests.
Today I wanted to print the photo in normal colors, so I changed to "Color". But I am still getting the same gross bile-green look in the photo. What else do I need to do to bring back my lovely flesh tones?

HI AGAIN,
Please note my gaffe--I should be talking about PAGERMAKER 6.5--not Illustrator--in the above post about problems with color.
Sorry for the confusion--my inexperience betrays me!

Photoshop Elements 8 - is anyone having a problem with the screen color ?

I just installed Elements 8 & the screen color has 2 choices:
DARK (Black screen with Black & Grey text)
LIGHT (Dark Grey screen with Black text)
BOTH of these are VERY difficult to read & some text just dissapears into the background.
After speaking with the tech at Adobe, these are the only 2 choices (Dark & Light) I have.
Neither choice is worth the eye strain.
Is anyone else having the same problem ?
Has anyone found a solution ?

Thanks again. I use 125% on a 23" widescreen Acer monitor. The menus display on both the PSE7 and 9 Editor but not on the 7 or 9 Organizer. For both Organizers, I get a blank space where the menu should be - and at the right of that space, the tiny, double-arrow drop-down is nearly invisible. On 7, I slid the Edit/Preferences/General/Appearance/Brightness control to the far right in order to see the drop-down arrows. But even so, clicking the drop-down then scrolling down to select the desired menu is a nuisance. On Organizer 9, I have not been able to find any Brightness or other window-color adjustment in Preferences or in any menu option, so the drop-down arrow is extremely difficult to see. Even if the menus were visible, as with the Editors, the dark grays and blacks of the windows strain my eyes. PSE has some great features, and 9 is beter that 7, but I don't want to use a photo editing app that is visually difficult to navigate. Please let me know if there is a fix for the menu display or the window brightness/color.

Problems with Scrollable Content : colored lines appear

Hello,
We have a book with several Scrollable Content (around a total of 200).
The fact is that in many colored lines appear. These lines appear i disappear when changing article,
anyone have any solution?
THANKS

Hi
I had the same problem. I had pasted the scrollable content directly into the container frame, but the pasted content was slightly 'taller' than the container window (the pasted object group was maybe 0.012 pixels larger than the container, so very slight) this caused it to display the coloured lines when I moved it up or down, although left and right movement worked fine. Resizing so the pasted content was smaller and exact pixels not 0.123 px (or the same size) as the container fixed it.
M

Problems with a HP Color LaserJet 2550Ln

Similar Messages

Maybe you are looking for