Problems with a Wacom Cintiq tablet after upgrade to Yosemite

I have a 15-in MacBook Pro Late-2013 Retina with 2.6GHz i7 Processor, 16GB RAM. I recently upgraded to Yosemite, 10.10.2, and then reinstalled my drivers for my Wacom Cintiq 12WX Tablet. Now, startup takes 10-15 seconds longer than before - not a huge deal, but noticeable. Also, when I attempt to start the computer with the tablet plugged in (via USB and Mini DisplayPort), startup hangs indefinitely, displaying a blank screen on both devices with only a cursor visible, for as long as 15 to 20 minutes, and never less than 10 minutes. When it finally responds, it has automatically logged in as a "guest," requiring logout and login again as the primary user.
Anything known about this issue? I'm a professional artist and it's really spoiling my workflow. I'd like to avoid rolling back my OS if possible, but maybe I'll have to do so.

Hi,
I am having that message, always if I delete a Sheet which contains an embeded query.
Even the sheet is deleted, the SAPBEX has information of all the embeded queries, and tries to find the Result area to put the data.
To find out if this is your case as well,
select an empty cell in a Sheet and continue like that, until all the embeded queries are been displayed.
Regards
Vasso
Message was edited by: VASSILIKI SIAGRI

Similar Messages

Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

Hi
I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
Thanks Portozzygirl

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag

Problem with WCS Audit status missmatch after upgrade

We had problem with wcs Audit status missmatch after upgrade to 7.0.164.3 WLC : 6.0.188.0.
how I can fix the problem?

Hi,
Try pinging the WCS from the WLC and vice versa and then try again to refresh config from controllers.. then follow the below if its still not happening..
Please forwrd the trace level logs from the WCS (Specifically WCS0.0.TXT logs) while recreating the issue!!
Regards
Surendra

Are you having problems with the Lacie external drive after upgrading to the new operating system

Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

See here for everyone discussing the issue you are having:
https://discussions.apple.com/thread/5475136?tstart=0

Problems with result area in workbooks after upgrade to BW 3.5

Hi,
we are experiencing some problems with our <b>workbooks</b> after the upgrade to BW 3.5. When refreshing all queries in a workbook (that was there before 3.5) without selecting a specific query we get the message <b>'Result area</b> cannot be found, specify a new one'. After selecting, the message appears again in an infinite loop.
Has anybody had similar problems and has found a solution for this?
Thanks,
EMS

Hi,
I am having that message, always if I delete a Sheet which contains an embeded query.
Even the sheet is deleted, the SAPBEX has information of all the embeded queries, and tries to find the Result area to put the data.
To find out if this is your case as well,
select an empty cell in a Sheet and continue like that, until all the embeded queries are been displayed.
Regards
Vasso
Message was edited by: VASSILIKI SIAGRI

Problems with installing Wacom cintiq drawing tablet?

I recently bought the Macbook Pro with retina screen. I already own a Wacom cintiq 12wx, which I have owned since 2010, and only used on PC's with Windows, using a VGA cable.
I wanted to install it on my macbook and bought a Mini displayPort to Dual-link DVI adapter, because it was recommended in the Cintiq manual. I have installed the tablet many times on PC's without trouble, and have been in contact with Wacom support, who reassured me that the installation process was done correctly, so that is not the problem.
Since the cintiq is a tablet with a display it must be installed in two stages. The first stage you simply plug it in and the computer will recognize it as an external screen.
then you install the driver and it will work as a tablet and a display.
So I plugged all the cables off the tablet in, turned the tablet and the Mac on. The screen mirrored to the tablet, and showed up in the Mac display menu.
I could not at the moment install the driver, I had no internet to download it, so I waited.
After ten days the internet was fixed. I attached all cables from the adapter to the mac, when they where both off, and turned them on, expecting the screen to mirror to the tabelt as usual. However I only got the message "no sync" "going to sleep" from the tablet wich went to stand by mode. I thought maybe installing the driver would fix it, and I did that, but the tablet still didn't have any screen. However the tablet recognized the pen, and moved the mouse on the Mac screen, with the tablet screen black.
What is wrong?
After that I uninstalled the driver, hoping to reset and try again, But even after the driver was uninstalled, the tablet recognized the pen and the mouse moved on the Mac screen. However the mac did not recognize it as an external display, and I couldn't find it listed anywhere in the Mac ( take into consideration I am new to the mac system, and did not really know where to look). If I want to install it from the beginning again, don't I need to remove it completely from the system?
When I talked to Wacom support they could not help me much, but from my explanation they figured there was nothing wrong with most cables. The only things they couldn't be sure about was the DVI adapter (which is completely new, and probably not the problem) and the DVI to mini dual link adapter I bought from Apple. However it definetely worked the first time, so could it just suddenly fail?
So my conclusion.
- is it possible to reset the whole installation process, and do it again from the beginning, maybe with the same result as first time?
- Or is it more likely that the adapter is the problem? And which should I buy instead?
Please help
Katarina

All it says there is at least 10.5.8. A new Mini would be 10.8.5 so I'd think it would work. You'd need a CD/DVD drive and there's no guarantee how well it will perform with the Intel graphics of a Mini, but I read posts from people in the Photoshop forums at Adobe who use Wacom tablets with MBPs and iMacs all the time.

Problem with scanning in Photoshop CS6 after upgrading to Mountain Lion

After upgrading to latest version of Mountain Lion i've got a problem with scanning directly into Photoshop CS6.
on the previous Lion version when I wanted to scan something, i just opened Photoshop -> File -> Import -> images from device
then a new window opened up the ImageCapture app where I could choose the device I wanted to use, and then I selected the scanner (Canon CanoScan 8400F) and I could scan directly into photoshop.
Now with Mountain Lion when I do the exact same thing, it opens a window, but it's impossible to select any device, as the new window is just a plain white window, with 2 buttons on top to rotate something that isn't there. (text is in dutch, cause I'm from the Netherlands)
hope someone can help me out.
I can scan with the use of the ImageCapture app without problems and then save that picture and open it in Photoshop, but it has worked before, so am I doing something wrong? or is this just a little bug
thnx in advance for the help

I’m having the same problem with my Epson Perfection 3200 Photo scanner and Adobe Photoshop CS6. It does the initial overview scan then I get the same blank window as BigNoud shows above. I've done a Software Update and have also updated OSX to 10.8.1.
I know for the Epson you can get a Mountain Lion compatible scan software from SilverFast for about $35.00 as an upgrade here.
I haven't gone that route yet as I don't want to give up any more money for my Apple/Adobe experience.
Any help would be appreciated.

Problem with ADF Security / SQL Authenticator after upgrade to 11.1.1.6

Hi,
We have an ADF application built with JDeveloper 11.1.1.2 that's been in production for a couple of years. Now we are in the process of upgrading to 11.1.1.6 so I have upgraded WLS and ADF in a test environment and re-deployed the application there. The application uses users and groups from database using SQL Authenticator configured in WLS. This worked fine in the old version but now after the upgrade we can't log in with credentials from the database. I can log in if I add a user to the default authenticator. We didn't touch any of the authenticator settings or security realm configurations during the upgrade. Both authenticators are marked as SUFFICIENT, as they have always been.
Has something changed in the way SQL Authenticator is used since 11.1.1.2? What could be the problem?
Regards,
Joonas

Answering myself here: after recreating the SQL Authenticator and the ADF Security configuration logins are working again. Don't know where the problem was though.

Problem with PO text in ME22 after upgrade

Hi,
I face an issue in Purchase Order Text. We have recently done the upgrade from SAP 4.6 C to SAP ECC 6.0. Before upgrade, the users were entering required texts in ME22 transaction for each item and select the check button available. All the text types ticked here are carried forward and printed on the Delivery output.
After upgrade, this tick is removed from all the existing documents and also for the new POu2019s users select this button and save it. But, when they come back and see it in change mode ME22, the tick is not available. Because of this issue, these texts are not printed in delivery outputs now.
I have checked this problem in SAP. No relevant notes are available. Has anyone faced this issue before? Can you please throw some light on the same?
Thanks and Regards
Vijayakrishna

Hi
Please, see these notes
Note 751441 - Consulting: Settings for texts from purchase order
Note 53593 - Q&A - Delivery text from stock transfer order
Note 417883 - Texts from purchase order
and related notes. They talk about how to copy text from PO to delivery (for instance, in SC, STO and so on). It's related with some customizing steps in VOTXN and some VOFM subroutines that perhaps they are lost after the upgrade.
I hope this help you
Regards
Eduardo
Edited by: E_Hinojosa on Aug 24, 2011 10:22 AM

I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?

If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.

Problems with Camera Raw 6.7 after upgrading to OS 10.8

I've been using Photoshop CS 5 with Camera Raw 6.7 on my MacBook Pro with no issues until I recently upgraded to OS 10.8. Now my Canon CR2 files (shot with a Canon G15) won't open. Does anyone know of a solution or work-around for this problem?

thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again.

Does the Macbook retina work with the Wacom Cintiq tablets?

I have the original Wacom Cintiq 21". Will the MacBook Retina work with this?

Yes - I have a 2012 MacBook Air and it works with a dual-link dvi adaptor only otherwise you'll end up with a lower resolution.
Took a while to work out, but works very well. It's also expensive
The Hdmi only supports 1080 and not the full 2560 x 1080. The other cables are useless.
It also works on windows 8 using boot amp
Hope this helps
David

Has anyone been having problems with bluetooth in Macbook PRO after upgrading to Mavericks?

Hello,
Ever since I upgrade my 13inch (early 2011) Macbook PRO to OS X Mavericks I have been experiencing problems with bluetooth connectivity. Suddenly my Magic Mouse stops working and I cannot connect it back. Also I try turning off the bluetooth function but is not possible. The only workaround I have found is to restart the system.
I appreciate any help.

Look in the More Like This box to the right of your post.

Problems with Office 2011 for mac after upgrading to Mountain Lion

Office 2011 for mac worked fine with Lion on my MacBook Air. I had been having some problems with my computer freezing and crashing, so the folks at the Genius Bar wiped my computer clean and installed Mountain Lion for me.
I have full backups (Time Machine) from before the wipe on my external hard drive, but I was told not to restore from the backup, that I should drag and drop files instead. I was also told to re-install any program for which I had the disk. I reinstalled Office 2011 via the disk.
Two major problems followed:
1.     I lost all my old emails (I use Mail). Even rebuilding the library or trying to restore them from Time Machine don't get them back.
2.     Word and Excel don't seem to recognize me anymore. I can pull up and modify an old document or workbook, but I cannot "save" my changes. I have to hit "save as." That's a pain, but there's a worse problem.
I have no trouble saving these "save as" versions to my desktop or to my Documents file. But I cannot save them anywhere else — even to the folder where I found the original document. I get a message that I don't have the necessary permissions to access or modify the folders. I'm asked to authenticate, and I do, but that doesn't seem to do anything.
I tried Get Info on the workbooks and documents, and I'm clearly granted Read and Write permission.
I've done a permissions repair via Disk Utility. There were some things to repair, but it didn't solve my problem.
I know I can move all documents to an external hard drive and then recreate all the folders, saving all the documents and workbooks "as" but it seems a huge amount of work. Can anybody suggest an easier route or how to get my email history?

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: 'resetpassword' (without the 's) and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/

Problems related to Pages 14, .doc, after upgrading to Yosemite

Using Pages 14 and running Yosemite, but many of my files are in Word for Mac.
When I open a .doc document in landscape mode it shows up as portrait and no way to change it. (If I copy/paste it into a new PAGES document all is well ... but that seems like an extra step or two I shouldn't have to take).
Also I cannot print any files from Word for Mac since I upgraded to Yosemite. If I open them in Pages I can print from there.
Ideas?

BigPoppaJohn wrote:
Also I cannot print any files from Word for Mac since I upgraded to Yosemite
You might want to check the forums devoted the problems of that app
http://answers.microsoft.com/en-us/mac/forum/macword

Problems with a Wacom Cintiq tablet after upgrade to Yosemite

Similar Messages

Maybe you are looking for