Problems with accounting integration cProjects

Dear Sirs,
I have some problems with accounting integration between my cProjects 3.10 and my ECC 5.0 system. I have followed the steps in the configuration guide as good I as can. However when I create a project, and go the accounting tab I get the following error:
The project is unknown in Accounting
Message no.
DPR_FIN_GECCO006
Diagnosis
Etc..
In the Cockpit for Controlling Integration I can see the following error at the time the project is created, and a new similar error is created when the status is set to released replicated.
No company code could be determined. Message No IAOM_CPROJECTS001.
In this message there is a reference to the fact that the company code can be set in the assigned model order for CPR1. I have created such a model order with a reference to company code 0100 for CPR1. However this does not seem to do the job.
I seem to be stuck, as I have tried every possible and unpossible lead to get any further. Any input for someone with the knowhow is highly appreciated.
Best regards,
Jørgen Ruud

Hello Jørgen,
It sounds strange, normally after create a model order and assigned to the scenario CPR1, then the determination of company code should work.
logic: CPR1 -> model order -> company code
Would you please try the note 875275, if it can help.
In case that it does not help, you can eithter use the Badi method to set it hardly, or create a customer message to let SAP check it.
name of Badi DPR_FIN_GECCO_ATTR
code like following:
      ls_attribute-data_element     = space.
      ls_attribute-value            = '1000'.
      ls_attribute-field_name_orext = 'BUKRS'.
      ls_attribute-fldname_receiver = space.
      ls_attribute-struc_name_copa = space.
      ls_attribute-field_name_copa = space.
      ls_attribute-ext_attr_name    = space.
      ls_attribute-ext_attr_value   = space.
      INSERT ls_attribute INTO TABLE ct_attributes.
regards!
Zhenbo

Similar Messages

Is Verizon unwilling or unable to fix problem with Account Owner(s)

A forum or Google search reveals several customers unhappy with how Verizon treats the account owners... count me as one. I'm sure there are many more customers who were equally unhappy but just accept Verizon's incompetence and complete the unnecessary gymnastics of un-registering accounts and then re-registering with a new username.
PROBLEM:
There are numerous scenarios that can cause a My Verizon account to have the Account Owner be listed with an incorrect telephone number. In my case, I had an account with AT&T and 3 additional numbers associated. As each account expired, I transferred the numbers to Verizon. The first account transferred was my 14yr old son. I registered a My Verizon account for management (my name & my userid) and eventually added the additional numbers, however, the Account Owner's phone number is listed as my son's cell.
Over the past 2 years (since I migrated to Verizon), I've had small problems with account notifications and other information being text to my son's cell. I've called numerous times and customer service says it's corrected, but eventually the problems return. Recently, I upgraded my phone and started using some new services like Backup Assistant and the fact that the Account Owner is associated with an incorrect number has caused even more trouble.
I simply want to keep my existing username for My Verizon and correct the cell phone number associated as the Account Owner. This should be extremely simple.
VERIZON'S SOLUTION:
"We can't do it". "Our systems don't allow us to make this change".
The Customer Service Department (or Lack of Customer Service Department) tells me that since they can't or are unwilling to do the necessary changes, their only solution is to force their customer to do their work. They will un-register the account and I can register again. There is no concern for the preferences of an existing customer (almost 3 years); there is no concern for the inconvenience caused to an existing customer who spends hundreds of dollars each month and thousands of dollars each year (I currently have 2 separate accounts with Verizon, 4 phones on my problem account and 4 phones on another for a total of 8 phones with data plans... do the math); there is no concern that I will now have to use a completely different username one that is no longer uniform with my other accounts; there is no concern that I will have to change any and all services that reference My Verizon. Quite simply... Verizon Wireless shows their Account Owners that they have no concern for us.
PROPER SOLUTION:
I have almost 25 years of Information Technology experience and over 3 years working with Call Centers (similar to Verizon's Customer Service), which explains in part why I find this so frustrating... the fix for this is SIMPLE!!! The real problem is that Verizon simply doesn't care enough to fix it because we are existing customers and not new customers.
Without going into specifics (nor could I since I don't have access to their systems), data for the My Verizon portal is contained within modifiable databases. These relational databases will be tied to other systems and other databases, but a modification of this type would just require that the portal be allowed to make the update to the appropriate field(s) within the appropriate database(s). If direct access is not attainable because of their design, it is still not too difficult to write an additional process to accommodate this change. These types of things are done everyday.
More importantly, even if Verizon was unable or unwilling to make these programming changes... I have no doubt that if Customer Service has an escalation process to their I.T. Department that a programmer with access to the application(s) and/or database(s) could easily make the change directly and almost immediately.
CONCLUSION:
Until now, my experience with Verizon has been mostly positive even to the point of recommending the carrier to friends and family. I've found their coverage area to meet my needs and the data speeds to be more than satisfactory. However, Verizon needs to remember that cellular service has essentially become a commodity and that customer retention is often based on other things than simply providing dial tone. With a monthly cell phone expense that rivals a car payment, I would think that Verizon would be more than willing to accommodate such a simple request to maintain a satisfied customer.
If you too are one of the many customers having issue with modifying the Account Owner, just resolve yourself that it appears Verizon is unwilling to make the simple correction to the My Verizon portal to satisfy our request.

I'm not 100% sure that I follow your reasoning, so please correct me if I misstate your opinions. I've numbered them so it will be easier to identify any mistakes I make.
1. Not allowing a user, customer service representative, or any Verizon representative to change the cell phone number associated with the Account Owner to another cell phone number on the same account is a security risk.
I'm not suggesting that I be allowed to change the name, social security number, or any other pertinent details related to establishing the original account. All the information pertaining to who is responsible for the bill remains the same with the single exception that the current associated cell phone number be changed to another number already listed on the account. In what possible manner is this a security risk? Frankly if the ability was enabled and someone either by mistake or incompetence made such a change the impact would simply be what I'm currently experiencing (inconvenience). Since in this hypothetical situation the ability to change this value is enabled, the "inconvenience" would easily be re-mediated by returning the value to its original state.
Furthermore, if there is some "security risk" that I'm over looking then an organization that is concerned about providing quality customer service would create procedures to accommodate customer requests and meet security requirements. Let's use a bank (with an obvious security vulnerability) and debit cards as an example. If I lose my debit card, I cannot go to my computer and print out a temporary debit card (very user friendly, but not secure). Some banks will allow you to go online and cancel the lost debit card while requesting a new one to be mailed to the address you have on file (user friendly and mostly secure). To solve this same problem at other banks might require you to go into the office and sign a form cancelling the lost debit card and confirming the address to mail you a new one (less user friendly, but highly secure). The Verizon equivalent, is me requesting that I add an existing bank account to my online banking and being told "We can't do it". However, because the bank cares so much about keeping me as a customer... they will delete my account, allow me to create another, possibly losing my historical data, have me change my username that I've been using for years, spend time adding all my online bill payments... all for the pleasure of staying their customer and getting to use their services as they should have been designed.
2. Making a software change that would allow users or CSR's to associate a different cell phone number on the account to the current Account Owner would be difficult and require downtime.
You give some time expounding this thought and I'm unaware of your web, application, and/or database experience... but I will try to address your concerns later. However, let's assume that you are correct and these changes will be difficult ("taking weeks to months"). The purpose of my post was whether Verizon was unwilling or unable to accommodate this customer request. You seem to be agreeing that Verizon is unwilling to make these changes, or at the very least, feel that Verizon has decided that the time and expense involved is of more importance than correcting an issue impacting their customers. I personally find the later equally disheartening as this has been an issue for many customers (you yourself mention experiencing the problem) and has been well documented through previous forum and Internet posts. Even by your estimations, if they had taken previous customer complaints seriously... this would have been fixed by now. Once again it seems the obvious answer is that Verizon may not consider customer service as an important factor as I do.
As far as your technology issues, I agree that more than a web page change would be required. I do take issue with comparing the change of a distributed application (operating system) that must be designed to support enumerable hardware components to the work required to makes changes to a web portal with a back-end in-house database. You could write an entire book detailing the differences between these two scenarios as they have very little in common, but I'll try to keep it focused to your points.
Coding
Coding an Operating System that must run on literally a multitude of hardware configurations and support an unending diversity of applications is an incredible endeavor and really never a finished product. Changes to an OS are constantly being made and the developers must consider hardware and software that they are not intimately familiar and occasionally even deal with 3rd parties to facilitate changes.
The change I'm advocating has a web component which would be replicated throughout their web server topology, however, these are items that Verizon's developers deal with routinely (if not daily). There are a very limited number of 3rd party concerns (a few different browsers, IE, Chrome, Mozilla & a disparate platforms such as PC, tablet, phone). A little research in the benefits of web portals (and cloud computing) verses distributed applications will clearly outline the drastic differences. A simple illustrative question (though maybe not a completely fair analogy) is how many people do you know who can code an operating system and how many people get on GoDaddy and create their own web pages. I'm not trying to insinuate that anyone who knows a little HTML can make the web portal changes, however, this isn't a difficult project for an experienced developer.
The bigger issues and ones that I alluded to in my original post are the changes that would be required to Verizon's back-end databases. The changes that would need to be made mostly likely involve multiple databases and assuming they are using a typical relational database design might require changes to key fields, adding new databases/tables, and exhaustive integrity checks. This isn't something that an average user could sit down and accomplish in an hour, however, these are simply the routine day-to-day duties of any professional database developer.
Again I reiterate... this change simply involves allowing someone (either a user, CSR, or other Verizon agent) to readily change an index record or records that correlates Account Owner to cell phone number. In terms of database management this should be simple.
Debugging & Deployment
The debugging/testing of changes made to an Operating System are amazingly complex for all the aforementioned reasons. The deployment of such changes is even more complex in that you've got to develop the mechanism to push these changes out to the entirety of the user community. I'll address deployment (or as you said dispersal) of this change because it's the easiest... quite simply there isn't one. The benefit of having a centralized web portal like My Verizon is that users come to you, not the other way around, and any change made will immediately be accessible by the user community. There is a deployment aspect in that My Verizon doesn't exist on a single web server, but again this is just the typical topology for a portal of this size and not relevant to our discussion. Debugging/Testing is an important aspect of any change and certainly Verizon has this methodology in place, however, I'll reiterate that this change should not be complex and shouldn't require extensive testing. We've also already discussed the fact that any debugging/testing only has to take place on a limited number of platforms.
Downtime
If adding the ability to change the relationship of the Account Owner to an associated cell phone number requires any downtime... the person responsible for Verizon's Development, Beta, and Production environments should be fired. There is simply no way this is even a possible concern. I've dealt with many companies with far less resources than Verizon and I assure you that changes of this nature would never require down time. I'm sure they have staff in place whose sole responsibility is to work on their continuity plan. This is a non issue.
Other Carriers
You can't possibly know how all carriers operate, though you may have some past experience with other companies. I would contend (and maybe I'm too optimistic) that a company with a focus on customer satisfaction when made aware of complaints and/or limitations in their service would seek to rectify the issue. It's quite possible that whatever other company you are referencing has fixed this issue if indeed it was similar... especially since I've hopefully bolstered my opinion that the resolution is not overly complicated.
Would you mind telling me if you deleted your 2 original comments to my post before I had an opportunity to answer? The reason I ask is that last night another user (jimfitzgerald) had posted a comment and I replied. He later posted a 2nd comment and while writing my response... all the posts were removed (his 2 posts, my reply, and your 2 posts). I'm curious if this was just a user withdrawal (though I really wish my response had remained in the thread), if there was some sort of technical issue with these forums last night, or if my response was deleted for cause by Verizon or other admin. Thanks!

I have problem with account that i can't make update or buy from app store There is massage appear in my payment page that i must contact with i tunes support to complete this transaction Please help me to fixe this problem as soon possible Hany hassan 00

I have problem with account that i can't make update or buy from app store
There is massage appear in my payment page that i must contact with i tunes support to complete this transaction
Please help me to fixe this problem as soon possible
Hany hassan
0096597617317
0096596677186
Thank you

You need to Contact iTunes Support...
Apple Support iTunes Store Contact Us

Problem with Account determination

Hi all.
I have a problem with account determination when I change some data in Tcode VKOA.
For example:
I made changes in VKOA to determine G/L account 0000523201 and it worked it.
But in the account document the account that is displayed is different (0000501000) and I don´t know why.
I checked the Analysis Account Determination in VF03 and the system found the correct account in the access sequence, but I realized that there is a second line with the message G/L account in document 0000501000 . Where do I determine this account, or how Can I fix it ?
Thanks for any help.
Renato

Hi reanto
Check in VKOA all the G/L accounts for all the respective account keys. Also check wheather any provisional G/L account have been maintained or not. for any account key
Also check wheather twice if you have maintained for the same account key different G/L accounts
Regards
Srinath

Problem in Accounting Integration in cProjects 4.0

Hi,
I am trying to customize the Accounting Integration in cProjects 4.0 with R/3. The problem comes when I try to replicate the Cost/Revenue rates to the R/3 system. I get the following error: "<i>Cost/revenue rate PM01: organizational unit 40000582 does not exist</i>"
The "organizational unit" is set in the cost/revenue rate as organization responsible. Why is that error poping up? Where can I create those organization responsibles? Do I have to create the data in my R/3 system?
Thanks in advance!
Best regards,

Thank you very much for your info, but I am still having the same trouble.
Apart form the former one I got two more customizing problems:
The point "Make settings in ERP systems" returns in an error
In the point Define Controlling Scenario in R/3 I don't have to option to choose Multilevel Controlling (can I customize those options?)
Thanks again,
Best regards,

Cproject problems with accounting settings

Hi all,
*I am not sure if someone can help me.*
*I am using cProjects suite 4.5, when I create a project ( in cproject) error message 'The settings for accounting integration contain errors' Message no. DPR_FIN_GECCO004 appears and the accounting tab is empty.*
*I am not sure where can be the problem, I have reviewed cproject configuration and I think it is correct.*
*Does anyone have a configuration guide? or at least may someone tell me what he has configued at this point IMG --> collaboration project -->Conection to external system -->Object link in sap system --> Make settings for calling a sap transaction -->Alias for the web server of a SAP transaction ?*
*Thank you very much for your help.*

Hi,
1.First define the cost/revenue rates used in costing.
2. Second imp activity is replicate cost revenue rates to R/3 system. if you using same system give RFC destination NONE. otherwise use your target system available to you. take help of basis if u dont know traget system. Activity given below when u replication cost revenue rates.
Activities
Enter the replication line and specify which rates you want to replicate under Selections.
If you do not specify a selection, all rates are replicated.
If you want to replicate the records only partially, and you do not want to post them in the target system, set the Test Run indicator.
After test run sucessful, plz uncheck that test rum box and replicate.
Thanks
Amit
note: award points for useful answer

Problems on Accounting Integration MLC

Hi Experts,
We are getting an error when trying to perform MLC in cProjects 4.0.
If turning on automatic MLC, we get the error Internal error: Calling costing leads to exception
If working with manual MLC, in the screen for searching PS projects
1. We don't get any of the search fields
2. We don't find any project in the system
As a test, I can say it is possible to create object links to WBS elements in the Object link tabs correctly.
Any idea on what can be failing here?
Thank you!
Kind regards,
Neil
Edited by: Neil Billqvist on Jun 6, 2008 12:41 PM

Hi Neil,
Internal error: Calling costing leads to exception --> use note 1019075.
for mannual please check the settings
-->spro
-->Collrabration project
-->Connection to External system
-->Account integration
-->define object link for account integration
In that page you will find two object type on right side table
one for WBS elemet and another for internal order
select: 0FIN_INT_ERP_PS
Then double click on Name of classes inSAP (letf hand side dialog structure)
then change the proxy class CL_R3_OLR3_PROJECTDEFINATION or CL_DPR_OLR3_WBSELEMENT
Also check project type details wether you have activated Accounting integration scenario if please activte
and please check is any project is created from PS module or not
and Also take help of note 977951
this note support for ECC 6.0 And cproject suit 4.00
thanks
sunil

Table Accounting Integration cProject

Hi Gurus,
I activated the accounting integration in cProject. I have need the table link project /task with internal order .
I have to understand from task which is internal order linked.
Thank you in advance
Vanessa
Edited by: Vanessa Lonati on Oct 19, 2010 10:10 AM

Hi Sejo,
thank you for information.
I look at table but I don't understand the mean of the fields. I have to find the internal order and cproject or task assigned.
I see EXT_OBJECT_ID what's ? project/task/intenal order, which conversion function module I use to display external name of the object?
I see also OBJECT_NO in some records it is valued other no,
which is the meaning of this field?
Could you help me to interprete this table?
thank you
Vanessa

Login in problems with accounts

I'm having major problems with my icloud and imessages accounts since updating from Mountain Lion to Mavericks. While I was using Mountain Lion, both accounts were linked up to my icloud.com email and NEVER experianced any problems. Then when I updated to Mavericks for some unknown reason it linked itself to my Gmail email account, which was always enlisted as a secondary email account. Now I cannot sign into my icloud (not the email account itself) because it continues to ask for me to enter a password of which it saids is incorrect. And then theres imessages - on both my iMac and iPhone, my contacts can't send me imessages nore use facetime. On there end for imessages it saids "iMessages Need to be Enable" (which under my settings it is), and for facetime it said "I'm unavailavle". After checking my online status with facetime it does indeed say I'm offline but when I try to change it to available by selecting it, it quickly closes; leaving me offline.
I really don't want happened and have no clue what to do. The whole thing went screwy after changing to Mavericks - quite frankly I'd rather Mountain Lion back, apart from having my accounts back to my icloud accout then my gmail and having my facetime and imessages working again.

System Preferences/iCloud - try signing out and then sign back in. I'd also try setting up your Messages account in Internet Accounts again.

Problem with " Account assignment category"- Services

Hello expert,
I have a problem with the order positions type " D" (Services). At the moment that I indicate that value in the field " Item category in purchasing document" , the field " Account assignment category" he becomes gray, preventing that can be modified later. What could do so that this field is modifiable in the future?
Thank you!!

hi
1. Go to Tcode- OMH4,
Maintain Acct assignment as "Possible" instead of not possible for Item Category "D"
2.Go to Tcode - OMG0
Here maintain Various Combinations of Item Category "D" and Account assignment Categories.
Then, Acct Assignment Category field in PO item overview will be open for Item Category "D".
Hope it helps,
Regards,
Rahul
Edited by: RahulNsk on Jun 5, 2009 2:03 PM

Problem with Xelsius Integration

Hi,
I have installed licenced version of Business Objects Edge Client tools and also integration kit and Xelsius. When I open the xelsius and trying to connect through manage connection - Data manager -Query As A Web service - getting problem with URL ,which URL do I need to use ?? and also I tried using SAP netweaver connection selected query and its throwing #2302 error,searched forums and found few answers for this error but still not able to fix the issue.Please let me know how to connect to xelsius to QAAWS and also to SAP netweaver connection.
Thanks in advance

Hi
#2032 can have multiple root causes. I would suggest you search on service marketplace for the error #2032 - you will find several entries. Take a look at those use cases and the corresponding solutions.
Ingo

Back to my mac can't start - problem with account

Having problems with Back to my Mac in Mavericks for one of my machines. Get the message, "Back to my Mac can't start because of a problem with your account. Sign out, sign back in, and try again. If this problem persists, restart your computer.
Tried cleaning out keychains and resetting icloud password, along with signing in/out of icloud, but no success. Anyone else see this problem?

Hi MarkDeBower,
Thanks for using Apple Support Communities. This article has some steps you can try if you are unable to use Back to My Mac:
OS X: Using and troubleshooting Back to My Mac with your iCloud account
http://support.apple.com/kb/ht4907
Cheers,
- Ari

Problems with Lync integration in App-V Package for Office 365 ProPlus

We have problems with setting Lync 2013 to automatic start after Windows start with Office 365 ProPlus App-V Package made by Office Deployment Tool. We use latest version for both (ODT and download package) at Windows 7 Enterprise 64 bit.
We have done this for Lync 2010 and also for Lync 2013 (MSI installations) and it works correctly.
User can choose to start Lync automatically, but this settings is ignored and in virtual registry is set wrong. We look for possible ways to set this by GPO (in ADMX is not this option available) by inserting in virtual registry with Package ID and user
SID in registry path.

Usually setting apps to auto start sets a registry key under HKCU\Software\Microsoft\Windows\CurrentVersion\Run, but since this registry key is inside the virtual environment, Windows does not read it at logon.
The workaround is to either set this key in the native registry (perhaps by an App-V script), or easier still, just copy the shortcut to the Start Menu\Programs\Startup folder. Since you can't really modify Office 2013 packages with the sequencer, you'd
have to add this shortcut by modifying the deployment config file.
Dan Gough - UK App-V MVP
Blog: packageology.com
Twitter: @packageologist
LinkedIn

Wireless printing - problem with MAC integration

Hi everybody.
Just bought a Macbook pro and cannot get it to recognize my printer.
Devices within network:
- Belkin WLAN Router
- HP Laserjet CM1312 multifunctional printer - with HP 2101nw wireless G (printing and even scanning works fine wireless!)
- Acer Notebook with XP Home (used to set up the 2101 wireless)
- Acer Netbook with XP Home (added later to network, no problem with printing, setup took 5 min)
Antivirus software: Avira Premium Security Suite on both XP's
WPA-PSK encryption, no mac filtering.
The Macbook can access internet, but nothing happens when I try to print. I wanted to stop the hassle that Windows is causing occasionally. Frustrating experience with the Mac so far.
Can anybody help?
This question was solved.
View Solution.

I have removed the printer, and added again - a couple of times. I was not sure what protocol to chose (LPD, IPP, Socket).
I took your advice and tried, but with the right click (ctrl pressed), nothing happens. The normal window for the print queue opens, and I cannot select anything like "Reset Printing System".
This does not work either, no Printer with "Bonjour" is offered for selection:
"Select the plus sign to re-add it. Look for the printer with Bonjour next to it, select it and wait until the "Add" button becomes available. Click it."
When I select the plus sign, I can only make settings in the "IP" area. Standard, Fax and Windows have nothing to select or to put in. "IP" offers Protocol to select and Address to fill in. I put in 192.168.2.6 and tried the different protocols. "Print with" offers generic PostScript printer, Generic PCL Laser printer, "other" and printer software - thats where I selected the driver for the cm1312
Can you tell what I did wrong? Thanks for trying

Problem with account

Hello, sry for my bad english, i just cant connect into my acc 2days, i use 100% good pw, and its saying bad pass.. when i use "problem with sing in" and it send me code on mail, i use all what it need and when i want change new pass, it dont change it and show me link for technical support, any1 know how fix it please? (rly sry for my english :x)

How to Contact Skype Customer Service
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

Problems with accounting integration cProjects

Similar Messages

Maybe you are looking for