Problems with activation of CRM_MKTELM hierarchy from CRM Marketing Planner

Hi Guru's
I am facing a problem between CRM 5.0 and BI7.0 in the Marketing Planner. When I create a marketing plan with elements in the marketing planner, it cannot update the hierarchy for InfoObject CRM_MKTELM in BI7. The error message:
Data in SAP BI could not be updated completely: see log
Message no. CGPL_BW_INTERFACE014
When opening the log it says that the hierachy does not exist. After this in BW there is now an A and M version of the hierarchy CRMMKTROOT, the M with the latest elements from CRM. (from here i can now activate the M one manually)
The action Activate BW Hierarchy in the Marketing Planner does not seem to work. We tried to run the activation program in CRM as well, without succes. We also checked the settings in SPRO in CRM, and looked at some notes as well.
Does anybody have a clue on this one?
Greetings,
Raimon

Hi Raimon,
Please check note-
Note 460302 - CRM_MKTPL: Double message concerning BW update
Regards,
Anil

Similar Messages

Problem with Billing Engine after upgrade from CRM 5.0 to CRM 7.0

Hello together,
The system of our customer has been upgraded from CRM 5.0 to CRM 7.0. After that some problems occurred regarded the billing.
In the Billing Due List a dump occurs when clicking on an item and then on conditions
Dump message: No function module can be found named "/1BEA/CRMB_DL_PAR_O_DERIVE" however.
(Other classes are new generated after the upgrade)
During the Analysis we looked to the billing engine navigator:
In the Billing Engine Navigator (Transaction: BEFN_F1) the Generation Log shows the following:
We have re-generated the Object PAR in CRMB->DL->Feature->PAR. But this shows the above displayed error message. How can we add value to the Placeholder?
Another question is which impacts does it have if we regenerate the complete billing engine for CRMB with transaction BEA_CONFIG_F1 (Configure Application)?
BR, Anne

Hi Nawanit,
we checked the key figure settings and categories. Everything is maintained correctly.
Since we work with MRP areas we also checked the "Global Parameters and Default Values for MRP Areas" in APO Customizing: The "Default values for Stock Transfer Documents" is set to "1" = Stock Transport Requisitions for MRP Areas.
BUT: When I try ot change this indicator I get the following message no. /SAPAPO/MRPA000:
"Process. w. stock transp. requisitions is not supported in standard sys. The process with stock transport requisitions will be supported as of SAP R/3 Enterprise Core Release 4.70 with SAP R/3 Enterprise Extension Set 2.0. ".
As far as we work with ECC 6.0, EHP4 this message makes no sense.
Does anyone have another idea?
Thanks
Jan

I have problems with activation, after delete mi Iphone from Icloud.

I have problems with activation, after delete mi Iphone from Icloud.

Hello Sikiz 21,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Best of luck,
Mario

HT201365 Hello Apple, I'm having a problem with activating my iPad 4. I created iCloud account which differs from Apple account but I now forget my iCloud password. How can settle it ? Thank you so much

Hello Apple, I'm having a problem with activating my iPad 4. I created iCloud account which differs from Apple account but I now forget my iCloud password. How can settle it ? Thank you so much.
Lydang
<E-mails Edited by Host>

Hello Apple, I'm having a problem with activating my iPad 4. I created iCloud account which differs from Apple account but I now forget my iCloud password. How can settle it ? Thank you so much.
Lydang
<E-mails Edited by Host>

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *********

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *******
<Edited by Host>

Hello Khayalh,
You should be able to link your phone number by following the steps in the article below. From your iPhone, sign out of FaceTime and iMessage and then sign back in and it should link. Check in the Start Conversation With and I Can Be Reached at section in iMessage and FaceTime respectively.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
-Norm G.

I have a problem with activation my iPhone 4.

Hello.
Case 71290.
I have a problem with activation my iPhone 4. I have bought the iPhone in a internet-shop one week ago and update iOS 7.1.1 yesterday. After update iPhone has an activation screen and asks previous owner’s Apple ID and Password. I don’t know Apple ID and Password; I haven’t communication with him. I can not use my iPhone 4 days. I am so disappointed this situation. Can you help me to disable this function, please?
Serial No of my iPhone is 69******A45 and IMEI is ******. I attach photos of the box and iphone.
Best Regards.
<Edited By Host>

Alexandrov_Andrei wrote:
Can you help me to disable this function, please?
No.
You need to contact previous owner or return it & get a refund.
-> Find My iPhone Activation Lock: Removing a device from a previous owner’s account

I have a problem with activation my iPhone 5

I have a problem with activation my iPhone 5. I have bought the iPhone in a shop one week ago and update iOS 7.1.1 yesterday. After update iPhone has an activation screen and asks previous owner’s Apple ID and Password. I don’t know Apple ID and Password; I haven’t communication with him. I can not use my iPhone 2 days. I am so disappointed this situation. Can you help me to disable this function, please?

simply177 wrote:
I beg your help!
I've already given you your only solution. Copied from my initial post:
"Your ONLY solution is to return the phone to the shop where you purchased it, & get your money back."
Good luck.

Problem with Active Standby Pair

Hi ALL!
I have a problem with Active Standby Pair replication.
I have 2 instance TT on host1 and host2
On host1 i created 2 data store rep1 and rep2
On host2 i created 1 data store t1
ALL data stores identical, and have one table REP_TAB.
AFter this i work with rep1 ds:
Creating active standby pair:
create active standby pair rep1 on "host1",
t1 on "host2"
subscriber rep2 on "host1"
store rep1 on "host1" port 18000 timeout 30
store t1 on "host2" port 18000 timeout 30and starting repagent
call ttrepstart;After this i try using ttrepadmin utility and ALWAYS GET this error
C:\Documents and Settings\user1>ttrepadmin -duplicate -from rep1 -host "host1" rep4
Enter password for 'tt':
TT12048: Error performing backup at source. More information can be found in th
e source's message log
TT7001: REP1:receiver.c(4979): TT7001: User authentication failedPasswort right. I dont know what i am doing wrong? Please Help!

Did you enable Access Control in this instance when you installed? If so, have you created the relevant users in the TimesTen instance?
If you have access to Metalink you may find Note 421220.1 useful in clarifying this process, and also for avoiding other problems you may encounter after performing a successful duplicate.

Problems with activity reports on Enterprise Portal

Hello, we have problems with activity reports on Enterprise Portal. It shows only zeros since certain date.
We have this error in monitoring of Activity Reports - Status of Activity Reporting: "The database contains non-aggregated data that is more than 2 hours old".
And we found this exception in logs: "Exception during a Prepared-statement DB update"
What could be a problem? What should we do?
Thank you.

Configurarion of the Data Collection Service is done well, I think:
Activate portal activity report: true
First day of the week (e.g., Sunday or Monday): Monday
Gather iView statistics:true
Gather page statistics:true
Gather statistics for remote users of local content (global portal): true
Number of days for daily data retention: 90
Number of days for hourly data retention: 30
Number of days for monthly data retention: 730
Number of days for quarterly data retention: 1460
Number of days for weekly data retention: 365
Objects to exclude from reports
Pages for which to gather user data
Save interval (minutes): 60
What should we do then?

Problem with: select 'c' as X from dual

Problem with 'select 'c' as X from dual'
I get 2 different results when I execute the above with SQLPlus (or java) depending on the instance I am connected to. For one instance the result is a single character and for the other the character is padded with blanks to 32 chars in the SQLPlus window (and java). Does anyone know what database setting causes this to happen? Is it a version issue ?
Test #1: Oracle 9.2.0.6 - SQLPlus result is padded with blanks
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Dec 10 09:27:58 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.6.0 - Production
SQL> select 'c' as X from dual;
X
c
SQL>
Test #2 Oracle 9.2.0.1 SQLPlus result is a single character.
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Dec 10 09:29:27 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL> select 'c' as X from dual;
X
c
SQL>

Using 9.2.0.6 On AIX 5.2 I get the single byte result:
UT1 > select 'c' as X from dual;
X
c
If the databases are on different Oracle Homes you may want to check the sqlplus global logon files for any set commands.
If you executed the two sql statements from different OS directories you may also want to check your sqlpath for sqlplus .logon files.
Try issueing clear columns and repeating the statement. Are the results the same?
HTH -- Mark D Powell --

Problem with activation

The error code is:E_ADEPT_REQUEST_EXPIRED
WHO CAN HELP ME?

Are you really having this problem with activation, or are you having it after activation when you try to read a book?
If it is for a specific book ...
If it is a loan check it hasn't really expired.
Then verify that ADE and any devices are set to correct time and timezone.
If it is for registration ...
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0
~

Problem with activating account

Hi Guys, I am newbie in the internet stuff and I dont know if I am writing on correct board on this website. I have got problem with activating my account. I received email but when I click on the link it was not working, is this link is correct? http://forums.creative.com/?7ea92d63b246

Hi,
I am not sure what's that string of numbers and letters at the begining of your message.
What product do you have?
What account are you trying to activate?

I have a problem with activation my iPhone 5, I have a problem with activation my iPhone 5

Hello.
Case ID: 585410348
I have a problem with activation my iPhone 5. I have bought the iPhone in a shop one week ago and update iOS 7.0.4 yesterday. After update iPhone has an activation screen and asks previous owner’s Apple ID and Password. I don’t know Apple ID and Password; I haven’t communication with him. I can not use my iPhone 2 days. I am so disappointed this situation. Can you help me to disable this function, please?
Serial No of my iPhone is F17KDG2WDTWD and IMEI is 013620000624551. I attach photos of the iPhone and the sales receipt.

Take it back to the Apple store. You can't activate it without the correct ID and password. This can't be disabled. Either get a replacement or get your money back.

OneKey Recovery 6.0. Problem with back up operating system from recovery cd'ies

Hello, i have problem with back up operating system from recovery cdies.
When i acceped start button to backup partition system i get an alert "space not enough"
I had linux before and i whant change it to windows back. i deleted all ext partitions. I have all unlocated space.I shouldnt have problems.
Please help me

I would use something like Partition Magic or Acronis Disk Director to first create a FAT32 partion for your C: Drive where your OS will go and be sure to leave 10GB or so unallocated for the secondary FAT32 Partition where your "factory image" will go.
You then create a Logical Drive with the unallocated space and make it hidden (PM or ADD will do this). Install your OS (preferably Windows XP if you want less problems) and then after you have setup everything the way you want (drivers, applications, etc), then use Acronis True Image to create your "factory restore" image on the hidden partition and activate the Startup Recovery Manager.
This is the way I do it and it works like a charm!

Problem with active noise cancellation function : ...

My nokia 6720 have problem with active noise cancellation function. It seem not working because it also have noise when this function is active. So, I try to disable this function and found that the noise is reduce (but still not clear). How do I correct this problem?
Thanks.
P.S. Firmware version is 012.008

"I must must achive a segnificant attenuation of the noise in a closed volume using some NI devices ..."
At first glance I would say "probably can be done using an FPGA as a target" since the FPGA can close a very fast loop.
But to do that with a microphone input on a PC running Windows...
I suspect that would be an exercise in futility.
Anyone out there been able to turn around a microphone input fast enough to something like this?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Problems with activation of CRM_MKTELM hierarchy from CRM Marketing Planner

Similar Messages

Maybe you are looking for