Problems with activation PDF-forms

Hi to everyone!
I'm trying to make a simple PDF-form: to print data from SBOOK training table. I use BC480 course. I've already done Interface, Content and Layout, but I can't activate form! No errors were found during Check, but after activation I see message "Action canceled by user" and form remains inactive. I don't cancel any action.
What could it be? Maybe somebody had such a problem?

hi Tahzeeb,
create a context attribute <xyz>
goto <xyz> -> Properties -> type...
click on the 3 dots "..."
you will get "Type selection"...
choose
Dictionaries -> Local Dictionary - > com.sap.ide.webdynpro.uielementdefinitions
-> visibility.... click "OK"
GOTO ur 
interactive form ->properties->visible
click on "..." and bind it to Context attribute <xyz>
whenever you want it the uielement to disappear
wdContext.currentContextElement().setXyz(WDVisibility.NONE);
whenever you want it the uielement to appear
wdContext.currentContextElement().setXyz(WDVisibility.VISIBLE);
hope this helps.
regards,
-amol gupta
Message was edited by:
amol gupta

Similar Messages

Problems with Adobe PDF forms in Web Dynpro Java

As of now , I have two major issues in developing Adobe PDF forms in Web Dynpro Java .
1.Text getting wrapped and repeated from the first line :
Any text field that flows to the next page gets wrapped at the end of the page and is again printed on the next page beginning from the first line .
For eg:
If I have 4 lines in a text field that is at the end of the page
1111111111111111111111
2222222222222222222222
3333333333333333333333
4444444444444444444444
and the page holds space for only two lines it prints the lines
1111111111111111111111
2222222222222222222222
in the first page and then proceeds to the next page and prints
1111111111111111111111
2222222222222222222222
rather than printing
3333333333333333333333
4444444444444444444444
2.No way to hide a page at runtime:
It is not possible to hide a page in a PDF form at runtime . If scripting is used , the page turns into a blank page but not hidden .
Any pointers on this????????
Helpful answers will be suitably rewarded with points!!!!

Yes,I am using the versions that you mentioned.
I have a node called MasterData which is the root node for my PDF Form.I have a node called GenData inside this node whose ctx_Appraisal_Type_Num attribute is bound to a hidden TextField in my form.In the docReady event of this TextField, I am writing the following FormCalc script to hide my SubForm whose Id is MngrCmptnc
if(MasterData.GenData.ctx_Appraisal_Type_Num == "2")
then
MasterData.MngrCmptnc.presence = "visible"
MasterData.MngrCmptnc.MngrCmptnc.presence = "visible"
MasterData.StrImp.presence = "visible"
else
MasterData.MngrCmptnc.presence = "hidden"
MasterData.MngrCmptnc.MngrCmptnc.presence = "hidden"
MasterData.StrImp.presence = "hidden"
endif

2 problems with populating pdf forms

I created a form in LiveCycle on top of an existing PDF. The form has 2 text fields (a company name) and an image (a company logo), and all are dynamically populated depending on who requested the form. I am using CF 8 to read the database and populate the fields. See tags below.
1. I have tried a zillion different ways to generate a line feed in one of the text fields but to no avail. In all cases, the characters actually appear in the output text. Supposedly the LiveCycle doc says I can use udf escape sequences like "\u000d\u000a" but those do not work Other attempts included '\x0d\x0a' " \r" " " \line but to no avail.
Does anyone know what character sequence to embed in a text field to cause a line feed in the output PDF?
2. I cannot find any documentation on how to specify the value for an imagefield on the PDF form. I am trying to place a company logo but nothing comes out on the pdf. Apparently I need something other than value="logofilename.jpg" but I can't find any doc on what to use.
Here is my code - very simple:
 <cfpdfform source="#sourcePDFpath#" action="populate">
 <cfpdfsubform name="topmostsubform">
 <cfpdfformparam name="txtAssocName" value="#Trim(assocName)#"> 
 <cfpdfformparam name="txtAssocAddress" value="#Trim(assocAddrFields)#" > 
 <cfpdfformparam name="logo" value="1.jpg" > 
 </cfpdfsubform>
 </cfpdfform>
Thank you, in advance, for your help!

Not sure if there is a way to pass a graphic into a PDF like that, but I've done it lots of times by positioning the graphic onto a PDF file using the iText java library (ships with CF). Might want to head over to http://www.lowagie.com/iText/ to check it out.

Problems with sending PDF form

I am unable to send my PDF form through Microsoft Outlook mail. The error message states there I have the wrong Server name?

How exactly are you sending that document?
What do you have set in Adobe Reader | Edit | Preferences | Email accounts ?

Problem with Activating Adobe Forms

Hi Everybody ,
I am developping an Adobe forms using Transaction SFP.
I have developped Interface as well as form .
While Activating Form :-
Its not showing any Syntax Error. Still its not gettng Activated.
What could be the reason ?
Thanks in Advance.
Thanks and Regrads.
Srikanta Gope

1. Checked ADS by executing program FP_PDF_TEST_00 it is fine
2. Installed ADLC 8.2
3. Adobe reader 9 is installed.
also see the following link
If Adobe, look here
/people/dezso.pap/blog/2008/01/25/ads-ssl-configuration-journal-i-abap--java-640--70x
For Adobe you also need readers right installed.
http://help.sap.com/saphelp_nw04s/helpdata/en/56/f2c94a069f44a785b85748e11f82a0/frameset.htm
If Active Directory:
http://help.sap.com/saphelp_nw04s/helpdata/en/43/4bba9d9e5e5f6ce10000000a1553f6/frameset.htm
Both Adobe and Active Dir will work with standalone Java.

Emailing a completed active PDF form using a Submit buttom? (Acrobat XI Pro.)

I have created a very large active PDF form with hundreds of fields, with text boxes, drop downs, radio buttons, check boxes and I think the kitchen sink. But for the life of me I cannot figure out how to create a Submit button that will send the completed form to an email address that is set to print anything that hits it.
I have read so much on it that I'm thoroughly confused. Do I need a script, is there a method through Acrobat menus I'm missing, or am I barking at the moon? Any help just getting me going in the right direction would be appreciated more than I could even say. Thanks!

Simply add a button and set it's Mouse Up action to "Submit a Form" and use a mailto type URL and specify that the complete PDF is sent. If it needs to work with Reader prior to version 11, it will additionally need to be Reader-enabled: File > Save As Other > Reader Extended PDF > Enable More Tools
Note that emailing is unreliable compared to submitting to a web server, and it's difficult to make secure, which is relatively easy with a web server.

Problem with preview PDF files on Windows 7 32bit

Hello,
in my office I have a problem with preview PDF files on my computers. The files are allright, but if I select a file and click on preview mode after ~ 10sec operation system write something "Preview this file is corrupt for PDF Preview Handler wrong". On other 64bit computers with same programs the preview is work. I try uninstall all Adobe soft (Reader, Flash), clean all Adobe data from folders in root and in register, but it is not solve this problem. On Microsoft forums wrote me, that the problem is probably with AR plugin.
So, can someone help me?
Config PC:
Windows 7 32/64bit Pro
Intel i3, 4GB
Adobe Reader 11.0.5
Adobe Flash Player 15 ActiveX
Adobe Flash Player 15 plugin
Preview Handler Surrogate Host ver.: 6.1.7601.17514
Thank you for help.

I think I figured it out after reading other forums. Thanks!

Problem with printing pdf file

hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank you

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Extend SAP R/3 4.x with Interactive PDF Forms

Hi there,
In this blog of Matthias Zeller <a href="http:///people/matthias.zeller2/blog/2004/06/22/the-hidden-secret-of-adobe-reader hidden secret of Adobe Reader</a> there is the following paragraph:
While mySAP ERP 2004 provides many business scenarios using Interactive Forms out-of-the-box, a lot of customers have asked me how they can use the new Interactive Forms with existing R/3 applications. Therefore, I would like to encourage you to vote for my SAP TechEd presentation proposal ("Extend your SAP R/3 4.x applications with interactive PDF forms"). I plan to discuss how you can connect your existing SAP R/3 applications with SAP Web AS 6.40 to enable interactive form workflows.
Can somebody tell me if this presentation is somewhere on SDN? Or can somebody tell me where i can find more information about this subject?
Thx in advance.
Regards Maarten.

Hi Maarten,
Here's a brief run-down on how you could make use of SAP/Adobe Interactive Forms and Workflow:
1) Remember that a form is really just a UI for collecting data. A PDF form can be used to collect data online (connected to your SAP system) or offline, e.g. you could send it as a mail attachment, fill it in, and email it to a central point for uploading into the system.
2) The main requirements for using SAP Interactive Forms are:
a) A NW04 (6.40) or NW04s (7.00) WebAs (Java Stack) to run Adobe Document Services. This is the critical component that assigns ReaderRights to the document, e.g. so that the user can change the data and save it on the document. You could run a WebAs like this alongside your R/3 4.7 - e.g. if you have an XI system or Enterprise Portal you could use that system to run Adobe Document Services. Every form you create must be generated via the Adobe Document Services to get the Reader Rights. Note: Get a NW04s environment if you can - as this release has usefuul new features such as loading attachments to the PDF, using digital signatures, etc.
b) A WebDynpro application to generate the Adobe form via Adobe Document Services, and to execute the Adobe Form when using online mode, and to upload offline forms. Tutorials on how to do this are available in SDN - have a look at the Adobe section within WebDynpro. Note: From ECC 5.0 there are some standard WebDynpros apps provided, but in R/3 4.7 you will need to write your own.
c) There's also a licensing requirement for any production custom forms (SAP provided forms and cosmetic changes to those forms are free) so make sure you get your SAP account manager involved to help sort out how your intended usage will fit in with your current license agreement and any discounts that may apply.
3) To use the "form" with workflow has some additional requirements:
a) You need to store the data entered via the form somewhere that is accessible by Workflow. The easiest approach here is to use the standard form handling technique Internet Service Requests. Transaction QISRSCENARIO will let you define all of the form fields, give you BADIs for doing validation, raising workflow events, etc. Also from ECC 5.0 onwards using Adobe forms as the form entry is a standard option for this technique, so this will help reduce the upgrade impact when you eventually do upgrade.
b) Assuming you use ISRs, have your WebDynpro App call the function module ISR_PROCESS_EVENT to pass the data to R/3 and do the validation checks.
c) Assuming you use ISRs, you use the BOR object for notification such as BUS2078, as your main object for the workflow. The form data is attached to the notification and can be retrieved using function module ISR_SPECIAL_DATA_GET.
d) If you want to call your WebDynpro App from SBWP (I take you don't have Enterprise Portal?) then use transaction WF_EXTSRV to define the web service to call your WebDynpro app and generate a workflow task for it. Also you must configure transaction WF_HANDCUST to enable R/3 to handle web services. Note: If you do have the Enterprise Portal, you can use transaction SWFVISU instead.
I'd strongly recommend you read the ISR cookbook at http://service.sap.com/isr as well. ISRs aren't the only way to use Adobe forms with R/3 but they are extremely handy if you want to use your Adobe form with Workflow.
As for Lotus Notes, you can use your WebDynpro app to generate and send/receive a form to/from an email address. You can also put a hyperlink in your workflow task to call your WebDynpro app and use RSWUWFML2 (swap to Enhanced Notifications when you upgrade) to send out a mail with the hyperlink attached as per usual.
You'll also find some useful threads on Adobe forms and Workflow in the SDN BPM Forum. So if you have workflow specific questions try raising them in the BPM forum.
Enjoy!
Regards,
Jocelyn

I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server wher

I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server where the PDFs open fine) I get an error 'There was an error processing a page. Invalid function resource' The other one just doesn't open at all. Can anyone help with this please?

Hello,
Are the pdf linked correctly in the website? Is this a public website? If yes, please post the link here.
~Deepak

My Client is having a serious problem with the Contact Form Widget

My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.

Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

Problem with navagation of forms

Hi everybody
I have a problem with navigation of forms
I have two forms say a and b.In form a i have a button and i want, when i press that button the form b should open.I wrote when_button_pressed trigger for that button in form a as open_form('b'); Raise form_trigger_failure;
When i run form a and press the button form b is not opening.It is giving me a message as 'form b cannot be opened'
Can somebody tell me where i am wrong.I have compiled b.
TIA
Prajakta

Why are you using Raise form_trigger_failure;
You don't need it.
Try doing open_form('b.fmx');
If this doesnt work
I think your problem is that the fmx file for form b is not in the path to be found.
make sure to include the direcoty in the forms60_path or have it in the same directory as form a.

Problem with activation

The error code is:E_ADEPT_REQUEST_EXPIRED
WHO CAN HELP ME?

Are you really having this problem with activation, or are you having it after activation when you try to read a book?
If it is for a specific book ...
If it is a loan check it hasn't really expired.
Then verify that ADE and any devices are set to correct time and timezone.
If it is for registration ...
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0
~

I have problems with activation, after delete mi Iphone from Icloud.

I have problems with activation, after delete mi Iphone from Icloud.

Hello Sikiz 21,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Best of luck,
Mario

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *********

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *******
<Edited by Host>

Hello Khayalh,
You should be able to link your phone number by following the steps in the article below. From your iPhone, sign out of FaceTime and iMessage and then sign back in and it should link. Check in the Start Conversation With and I Can Be Reached at section in iMessage and FaceTime respectively.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
-Norm G.

Problems with activation PDF-forms

Similar Messages

Maybe you are looking for