Problems with adjusting volume using Airport Express - please help!

I have set up Airport Express and I can now wirelessly play ITunes through my stereo. However, adjusting the volume is a nightmare. Using the ITunes volume control it gets so loud that the speakers almost blow despite it being on the lowest volume on the volume bar. Making it quieter (by sliding the control minutely to the left) turns the volume to so quiet I cannot hear it! How can I have a normal control of the volume. The volume control on the amplifier does not alter the volume if played via ITunes wirelessly. I have searched for volume preferences but nothing works. Any advice before my neighbours kill me?

I have mine plugged in to Tape In on a Bose Lifestyle console. The volume via the Bose remote works fine as does the iTunes slider, although it has to be said it is a little tricky to fine tune the iTunes volume level from the slider.
If your inputs are correct you should be able to use the volume control on the amp.

Similar Messages

Hello, i have a problem with this number code 213:19, please help me!

Hello, i have a problem with this number code 213:19, please help me!

dan
What version of Premiere Elements and on what computer operating system is it running?
If you are using Premiere Elements 13, have you updated it to 13.1 yet? If not, please do so using an opened project's Help Menu/Updates.
What type of user account are you using....local administrator or domain type?
Please review the following Adobe document on the 213.19 issue. Have you read that already?
Error 213:19 | Problem has occurred with the licensing of this product
ATR

Problem with Macbook pro and Airport Express!!!

I'm having the same problem I have seen others with right now with my macbook pro and my airport express. I have set up and reconfigured the A.Express 3 times now. I have the green light, i have the Ethernet configured, I have full bars of reception but I cannot access the signal. meaning I can not go online even though everything is set up correctly and says that it's good to go. Anybody have any advice?
Is it an issue with having to re access the network I created with the Airport utility?
It worked the first time I configured the A. Express with my macbook pro no problem. Then suddenly my computer was just not getting internet. Even though all the settings were ok and I was even getting full bars reception from the device on my comp. So I reset the A.Express and have been having the problem mentioned above since that point. Please help me if you have any advice. Thanks so much in advance.

I had the same problem, and to test if I was connected launched Safari and Safari after a few seconds of not connecting, it shows you a dialog box, with options to follow up, I follow the dialog box and like magic I am connected to the Internet.

How to adjust volume of Airport Express speakers on Apple TV?

Hello,
I've just setup my Apple TV (bought in November 2012).
The latest version of the firmware allows to select AirPort Express speakers as default audio output. This is great.
While watching Youtube videos or listening iTunes music, I can't find how to adjust the output volume.
I am forced to set it by using the speaker remote control which is quite frustrating.
Any clues?
I've attached a photo of the Apple TV screen while playing a Youtube video. There's an output selector. But I can't access the volume options.
Thanks a lot!

Hit "up" two times to bring up "movie menu", then hold down "select", then navigate up and over to "speakers" tab, then down to your "AirPlay speakers", then move slider to right to increase volume
DONE!!
found it here so i dont deserve the credit but you guys should know - i struggled with this for hours wondering why the streamed audio was so low
https://discussions.apple.com/thread/2600145?start=120&tstart=0

Printer problems connected to iMac using Airport Express

I have an Airport Extreme functioning as a base station,and an Airport Express extending the range to an iMac i keep on the third floor of my house; my HP printer is connected to the iMac. My iBook laptop in my kitchen connects wirelessly to the base station's stronger signal. Previously, when I used a Linksys system, my laptop was able to 'see' the printer connected to the iMac; now I can't. (I also am unable to fileshare between the computers, even tho i have filesharing switched on.) What gives (on both the printing and filesharing questions)?

If you run the Airport Admin Utility on the iBook - does it "see" both the Airport Extreme Base Station and the Airport Express?
Double check that your broadband modem is connected to your Base Station's WAN port - that's the port labelled with the "circle of dots" icon.

Wireless Problems with 3 month old Airport Express

Ive an airport express (3mos old) giving spotty internet connection. It shows full bars on wireless icon and is connected to our main homes wireless. The signal shows itself as being all 4 bars, however its spotty when using. I have guests complain it just doesnt work, even though it shows there is full internet connection. The light is green. It does not blink etc. Im concerned. How can I fix this? What could the issue be? It seems to go out all together at times, even though it shows full working order on the wireless icon. Help.

It shows full bars on wireless icon and is connected to our main homes wireless.
The AirPort Express cannot wirelessly "extend" the network unless it connects to another Apple wireless router. Are you using an Apple router to provide your "main" nework?
Or, did you mean to say that the AirPort Express connects to your main wireless router using a permanent Ethernet cable connection?

Problem with I-Trigue 3400 (static)! Please help!

Alright, I bought my first set of I-Trigue 3400s about 2 weeks ago. Less than a few hours after using them, static started to come through the right speaker. This would happen intermittently for the next 2 days before I decided to exchange them. I was told it must of been a manufacturing defect and not to worry.
Well, I got a 2nd set of the I-Trigues to replace my first set. Everything has been swell for the past 2 weeks until last night. Last night and today I am once again getting static over my speakers. I tried fiddeling with the wires thinking it might be a loose connection and I also tried shutting off my computer and any nearby electronic devices. Unfortunately, none of my attempts have resolved the issue. This time the static is coming out of both speakers, although it is really bad and loud with the right speaker. I tried switching the left/right plugs around for the speakers, and this just made the louder static come out of the left speaker instead of the right one..
PLEASE HELP! My speakers haven't even lasted me two weeks!! And this is the 2nd set of 3400s I buy!!!!
btw, I've already sent for my rebate, so I don't think I can exchange my speakers for the THIRD time!

Hey! I've got the same problem with the same kind of speakers! When im listening to something volume is coming down and after a some time its coming back to its previous level! Coming back to its normal level can be forced by turning the speakers on and off! thats all i've discovered...
i also heard that some of creative speakers have kind of (f**k i dont know the word in english :P ) which works like that: when subwoofer is hot it automatially turns the volume lower to save your speakers from burning form hot :P or something like this :P
hmm... what i discovered that is no matter what i connect as source of music! effect of volume is the same
or maby you discovered the reason of this?
ps.
sory for my very unperfect english...

Bought a used Airport Express - Need Help?

I have an airport extreme base station, but its signal doesn't reach into my kitchen as well as I'd like. Thus I bought a used express to act as a signal extender. I plugged it into a wall socket in my kitchen and it picked up the signal from my airport extreme no problem. However, it seems to be WEP enabled from it's old owner and I don't know the password. Is there any way to reset the airport express so I can use it with my own wireless network?

Yes, to reset the AX, just follow these instructions: http://docs.info.apple.com/article.html?artnum=108044
Then follow these instuctions to add it to your existing network: http://docs.info.apple.com/article.html?artnum=107454

My Facetime does not work on my home wi-fi(I use airport). Please help me troubleshoot.

As I indicated, I have iPhone 4 using 5.0.1. I can use Facetime using wi-fi everywhere else but never at home. I'm wondering if it has something to do with my router and using Airport to connect wirelessly. Does anyone else have this problem? I'm not a tech guy so any lay explanation of what I should be looking for is appreciated. Thank you!

I too am having the same issue as the OP.
Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

Having a big problem with my 6 day old macbook, please help!

My macbook was working fine, I haven't had much of a chance to install the hardware that came with it until tonight though. I was starting to install the first disk that came with my macbook, when I saw that it would take over 3 hours to install. SInce I need to go to bed early I decided to cancel and figured I could start tomorrow after work.
Well, I turned my mac back on to see if it was still alright, and my mac hd is missing off the desktop, it doesn't even show the main toolbar/taskbar that's across the top of the screen unless I'm in safari. A message keeps coming up that says spotlight quit unexpectedly. I tried hitting all three options (ignore, report, and restart) different times and the window still keeps coming up.
I put the disk back in my computer to see if I could just start to install it again but the computer isn't even recognizing that there is a disk in there.
PLEASE HELP ME!! This is a brand new computer and I can't afford for it to break.

I hope you invested in AppleCare. It extends your warranty for three years and also gives you three years of phone support. MacBooks come ready to use, as far as I know. The discs that come with it contain software, not "hardware" are provided in case of problems. Take your MacBook back to the Applestore and they will take care of the problem. If it is unfixable, they will replace your MacBook, but you only have fifteen days, after which, they will repair your MacBook, but not replace it (unless it is totally FUBAR) Your sales person should have explained all this to you. Good Luck, and welcome to Mac world.

Problem with zen-nano-plus!! please help

i have the zen-nano-plus 52mb. and i try to update the firmware with latest version but i don't delete the music files in it.
i have started the instalation and the program asked me to delete the files on zen. (i didn't care keeping the files, so i continue the instalation)
when the program began to delete the files, after in few seconds i received an error messege from windowsoperating system reported error. the limit time on semaphore it's over.) now i have an 0.00.00 firmware version and i can't use the zen-nano because it's not starting. i have tried with the recovery tool but same situation it happend again. please help me if anybody knows something!!!!

Go to Creative.com and click the Support link. Look for the firmware driver for your Zen Nano and follow the directions. I had to do this to fix my Zen Nano Plus, because it had the exact same problem that yours had.
Good luck!

Problem with my ipods audio!! Please help!

When I play any audio on my ipod, it usually only comes through one earbud. Even if the headphones are brand new, and in perfect working order. My brother has a perfect working set of headphones, and when he uses them with his ipod, they work perfectly. Then when I plug them into my ipod, the sound only comes through 1 earbud (the right side). Then if I lightly pinch to the upper right of the click wheel (right under the screen), it will start to work. But I sometimes have to pinch in different places. What could be the problem???? Do I have to send it in to be repaired? Please help!!!

Try a 3rd party site and you can either have it fixed or buy the part and fix it yourself:
http://www.iresq.com
http://www.ipodmods.com
or Google for more.

Problems connecting to Internet using Airport - can anyone help ?

I'm using a MacBook running OSX 10.4.11, trying to connect to internet using Airport. I connected OK first time, but after powering off the Mac, each time I now try to connect again, the Mac can't find the network. Network Diagnostics can't fix it either. I use a Linksys wireless router, connected to an ADSL modem. I use PPPoE. I live in Borneo, and the line connection is not great, occasionally the phone line drops out and then modem reconnects itself, I wonder whether this is causing some sort of problem with IP settings. The only way I can connect wirelessly is to start the Mac, reboot the modem, then the router, and plough through Network Diagnostics. A real pain. Help much appreciated.

I have a Linksys Wireless-G (model WRT54GS). This is working ok because I have two other wireless devices (internet radio and iPod touch) which connect fine. Firmware is up to date. I've done a bit more troubleshooting, and the the problem is connected with the phone line, which drops out all too regularly. Each time the phone line drops out, the Mac is unable to connect to the network wirelessly. After going through Network diagnostics, and rebooting the modem+router, it comes with a message saying "Network changes detected", and then I can reconnect OK. The funny thing is, the IPod touch can always reconnect no problem, even if the line has dropped out since the last login. Given that I've got a crappy phone line conection, is this normal or is there something wrong with my Mac settings ?

Problem with Micro Sim release Mechanism. Please help?

I am using Ipad2 and tried to change the Micro SIM using the Pins to release it. The Micro Sim holder is not coming out as usual and there seems to be an internal problem with the release mechanism. For now, I can't access my Micro Sim. Please help?

Tried as suggested but it does not work. Something seems wrong in the release mechanism. Thanks anyway. Is there any other option? If I bring it the Apple Service Center, will they be able to work it out?

My iPod Touch won't connect when using Airport Express! HELP.

If I connect from work (wirless location) my iPod touch has internet. If I try connecting from home with Airport Express--- it will not connect to the internet.

Which generation iPod Touch do you have? How do you have the AirPort Express Base Station's (AX) wireless network configured? That is, which Radio Mode and Wireless Security type is it using?

Problems with adjusting volume using Airport Express - please help!

Similar Messages

Maybe you are looking for