Problems with Admin Account but not Test Account?

I recently installed my applications into this new MacBook Pro and it was working fine. After a few days Photoshop began acting up and after spending time with Adobe, it was determined that the Test Account is working properly but my Admin account is not. I reinstalled my Operating System but the same issue persists. There are three Framework permissions that won't repair in disk utility, would this have anything to do with it?
What else should I try?
Thanks for your help.

Greetings,
If 1 user account has an issue but another does not then that would suggest something has changed in that user. Reinstalling has no effect on user specific issues (usually) as applications are usually system wide.
If it is only Adobe Applications that are acting strange, Adobe should be able to tell you what user specific files Photoshop has and where they are located. Personally I would contact them back before blindly yanking files (they make their software after all. They should know best what files might be important.)
However if you are feeling adventurous:
You could start by removing user specific files:
Your User > Library > Caches (restart after pulling this to the trash)
Your User > Library > Preferences > Adobe and/or com.adobe files (restart after removing)
This article might also be of use: http://support.apple.com/kb/HT1199
Hope that helps.

Similar Messages

  • Why does Mail open in guest account but not my account since upgrade to Mavericks?

    I've read a lot of threads but not found anything that works for me. The history is this:
    I've upgraded to Mavericks 10.9.2. Since then, Mail won't open in my own user account. I only get a very brief error message:
    Process:   
    Mail [1448]
    Path:       
    /Applications/Mail.app/Contents/MacOS/Mail
    Identifier: 
    com.apple.mail
    Version:   
    7.2 (1874)
    Build Info: 
    Mail-1874000000000000~1
    Code Type: 
    X86-64 (Native)
    Parent Process:  launchd [157]
    Responsible:
    Mail [1448]
    User ID:   
    I have gone to user/Library/Mail and deleted the contents of the folder Mailboxes + all the other mailboxes. No change - Mail still won't open.
    If I switch user accounts to guest user, Mail opens normally (sets up email accounts etc).
    Any advice would be much appreciated.

    Rebooted in safe mode, repaired disc permissions, rebooted (again in safe mode) but no difference.
    There was a bit more detail I could / should have added.
    1) Before it crashes, Mail says it is Upgrading your Mail database.
    2) I downloaded Mail update but Installer said none of the drives were compatible. (Anyway Mail works fine in Guest Account)
    3) I've been through all the tips on this post https://discussions.apple.com/message/23490745#23490745http://
    and
    looked at Internet accounts in Preferences and none of my email accounts is checked with Mail. It asks for a password for each one but when I provide it I get the message Unable to verify account name or password. And if I try and uncheck iCloud with Mail I get the message that I need to do that from within Mail. (Obviously not possible until I can open Mail).
    In Terminal tried defaults delete com.apple.mail ColorQuoterColorList but got the message that it hadn't been done.
    Tried to find Envelope.x.x files as per this fix:     Final solution: Go into ~Library/Mail/V2/Mailboxes > Delete all mailboxes. Then go to ~Library/Mail/V2/Maildata and delete 3 or more "Envelope.x.x" files > Restart Mail, and enjoy your success.     but don't have a V2 folder nor Envelope.x.x files. I do have Envelope Index file and Envelope Index - journal
    I don't suspect 3rd party applications because I think they are all available in the Guest Account aren't they?
    Many thanks for your reply though. Any more ideas?

  • Airport Xtreme problems with 10.5 but not 10.4.11 or 10.3.9

    I have a one-year old Airport Extreme (801.11n) that connects generally well with my Macs running 10.3.9 (an 800MHz iMac), 10.4.11 (MacBook Pro). However, it doesn't connect well with my Macs running 10.5.3 (iMac G5 and MacBook). The iMac G5 can see the base station but the connection always times out. The MacBook can see the base station, connect to it, but can't hold the connection for a long period of time and then can't reconnect after that unless I reboot the machine.
    I am beginning to think the Airport itself is getting flaky. This morning the iMac 800 MHz lost connection to the base station and couldn't get it back for about 30 min (despite repeated tries on my part). When I was troubleshooting this, my children (the iMac 800 MHz is their computer) told me that they had been having intermittent problems with wireless over the last few months...
    Any advice? Thanks to anyone who can help.

    Exactly the same problem with me.
    Mac mini (on 10.4.11) and Imac (on 10.5.2) had no problems.
    MacBook Pro (on 10.5.3) keeps dropping off the internet. I can see the network, it says I'm connected to the internet but just can't browse.
    It comes up for a few minutes - then it drops out again.
    A temp fix is by forcing the Extreme to 802.11b/g.
    It's an invisible feature in Airport Utility.
    Go to the wireless tab, and hold "control" down when clicking on the drop down menu.
    Select, restart and then it should work - admittedly at lower speeds.
    Hopefully the next Software Update will fix the problem.
    Another fix I've heard about is to let your modem control the PPoE settings rather than putting the connection details into the Extreme.
    Haven't tried it, but it's worth a shot.
    Just remember to change the internet connection settings in the Extreme to connect via ethernet rather than PPoE.
    Hope this helps.

  • Cannot Retrieve referenced URL in wscript file from Local System Account, but not other accounts on the computer.

    Hello,
    I have a WScript File that includes an external resource (js file).
    It works on one computer and it does not work on another computer.
    If I run this file from a normal admin command prompt everything runs fine on both computers.
    If I run this file from the Local System account using PsExec it runs fine on one of the computers and throws an error "Cannot Retrieve referenced URL" on the other computer.
    The reason I want it to run from the Local System account is that it is executed from a Windows Service.
    Is there some setting or some way for the IE cache to get corrupt on the Local System account or something like that?

    JRV,
    You are by far the worst 'support' person I've ever seen. If you aren't going to be thoughtful in providing support, don't pretend. If you're going to pretend, leave your condescension on the shelf. You have provided no thoughtfulness whatsoever to his issue,
    and have in no way improved the discourse. You are arrogant and condescending without exhibiting any intelligence whatsoever. I'm impressed Matt kept calm through your demeaning, counterproductive diatribes.
    Matt,
    First I'd check UAC settings, because I believe that can change how elevation works substantially.
    Second, I would check the versions of wscript.exe on both machines, both in System32 and SysWow, and I'd check for updates bypassing WSUS to make sure there's not something silly going on there (totally a shot in the dark, catch-all theory).
    Have you made any headway in the last few weeks?
    -John
    This is not a support forum and it is not for assistance in fixing broken configurations.  It is a scripting forum. The OP proved that the issue is not the script but the environment it is running in.  You should not get mad just because you are
    not getting satisfaction.
    ¯\_(ツ)_/¯

  • Problem with JRE1.5 but not JRE1.4

    I have a program, that compiles and runs well on Java 1.4 but has serious trouble on Java 1.5.
    I will click a button and then the GUI will freeze for 10 seconds, with the CPU at 60%. It shouldn't be doing anything intensive, just updating a couple of JLists. The problem is very inconsistant. I will remove parts of the code, and the problem happens on some other action.
    I've tried this on linux and windows, with the same results. 1.4 good, 1.5 bad. Here is a dump (after sending it a sig 3) while it was in this frozen state. It looks like its waiting for something... what!
    Any pointers will be appreciated....
    Michael
    Full thread dump Java HotSpot(TM) Client VM (1.5.0-b64 mixed mode, sharing):
    "DestroyJavaVM" prio=1 tid=0xf3b00a68 nid=0x29c3 waiting on condition [0x00000000..0xfeffd260]
    "TimerQueue" daemon prio=1 tid=0x083eaa28 nid=0x29d5 in Object.wait() [0x02b80000..0x02b80480]
    at java.lang.Object.wait(Native Method)
    - waiting on <0xcac5a100> (a javax.swing.TimerQueue)
    at javax.swing.TimerQueue.run(TimerQueue.java:233)
    - locked <0xcac5a100> (a javax.swing.TimerQueue)
    at java.lang.Thread.run(Thread.java:595)
    "AWT-EventQueue-0" prio=1 tid=0x083d5b78 nid=0x29ce runnable [0x01323000..0x01324780]
    at java.lang.AbstractStringBuilder.expandCapacity(AbstractStringBuilder.java:99)
    at java.lang.AbstractStringBuilder.append(AbstractStringBuilder.java:393)
    at java.lang.StringBuffer.append(StringBuffer.java:225)
    - locked <0xca55ffa8> (a java.lang.StringBuffer)
    at Map.toString(Unknown Source)
    at TabListCellRenderer.getListCellRendererComponent(Unknown Source)
    at javax.swing.plaf.basic.BasicListUI.updateLayoutState(BasicListUI.java:1134)
    at javax.swing.plaf.basic.BasicListUI.maybeUpdateLayoutState(BasicListUI.java:1084)
    at javax.swing.plaf.basic.BasicListUI$Handler.valueChanged(BasicListUI.java:2200)
    at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:187)
    at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:167)
    at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:214)
    at javax.swing.DefaultListSelectionModel.insertIndexInterval(DefaultListSelectionModel.java:566)
    at javax.swing.plaf.basic.BasicListUI$Handler.intervalAdded(BasicListUI.java:2158)
    at javax.swing.AbstractListModel.fireIntervalAdded(AbstractListModel.java:130)
    at javax.swing.DefaultListModel.addElement(DefaultListModel.java:348)
    at BLS_ES202.UpdateCodeList(Unknown Source)
    at BLS_ES202.NAICSFilterComboBoxActionPerformed(Unknown Source)
    at BLS_ES202.access$500(Unknown Source)
    at BLS_ES202$6.actionPerformed(Unknown Source)
    at javax.swing.JComboBox.fireActionEvent(JComboBox.java:1197)
    at javax.swing.JComboBox.contentsChanged(JComboBox.java:1268)
    at javax.swing.AbstractListModel.fireContentsChanged(AbstractListModel.java:100)
    at javax.swing.DefaultComboBoxModel.setSelectedItem(DefaultComboBoxModel.java:88)
    at javax.swing.DefaultComboBoxModel.removeElementAt(DefaultComboBoxModel.java:140)
    at javax.swing.DefaultComboBoxModel.removeElement(DefaultComboBoxModel.java:156)
    at javax.swing.JComboBox.removeItem(JComboBox.java:718)
    at com.heterodyne.gui.MemComboBox.add(Unknown Source)
    at BLS_ES202.BtnSelectCodeActionPerformed(Unknown Source)
    at BLS_ES202.access$700(Unknown Source)
    at BLS_ES202$8.actionPerformed(Unknown Source)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
    at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
    at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
    at java.awt.Component.processMouseEvent(Component.java:5488)
    at javax.swing.JComponent.processMouseEvent(JComponent.java:3093)
    at java.awt.Component.processEvent(Component.java:5253)
    at java.awt.Container.processEvent(Container.java:1966)
    at java.awt.Component.dispatchEventImpl(Component.java:3955)
    at java.awt.Container.dispatchEventImpl(Container.java:2024)
    at java.awt.Component.dispatchEvent(Component.java:3803)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
    at java.awt.Container.dispatchEventImpl(Container.java:2010)
    at java.awt.Window.dispatchEventImpl(Window.java:1766)
    at java.awt.Component.dispatchEvent(Component.java:3803)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:234)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
    "AWT-Shutdown" prio=1 tid=0x083cfd48 nid=0x29cd in Object.wait() [0x017f3000..0x017f3700]
    at java.lang.Object.wait(Native Method)
    - waiting on <0xcaa026d8> (a java.lang.Object)
    at java.lang.Object.wait(Object.java:474)
    at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
    - locked <0xcaa026d8> (a java.lang.Object)
    at java.lang.Thread.run(Thread.java:595)
    "AWT-XAWT" daemon prio=1 tid=0x083c7418 nid=0x29cc runnable [0x04681000..0x04681680]
    at sun.awt.X11.XToolkit.waitForEvents(Native Method)
    at sun.awt.X11.XToolkit.run(XToolkit.java:463)
    at sun.awt.X11.XToolkit.run(XToolkit.java:438)
    at java.lang.Thread.run(Thread.java:595)
    "Java2D Disposer" daemon prio=1 tid=0x083bb430 nid=0x29cb in Object.wait() [0x03f60000..0x03f60600]
    at java.lang.Object.wait(Native Method)
    - waiting on <0xcaa027f8> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
    - locked <0xcaa027f8> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
    at sun.java2d.Disposer.run(Disposer.java:107)
    at java.lang.Thread.run(Thread.java:595)
    "Low Memory Detector" daemon prio=1 tid=0x080a0790 nid=0x29c9 runnable [0x00000000..0x00000000]
    "CompilerThread0" daemon prio=1 tid=0x0809f2e0 nid=0x29c8 waiting on condition [0x00000000..0x00531e68]
    "Signal Dispatcher" daemon prio=1 tid=0x0809e2c0 nid=0x29c7 waiting on condition [0x00000000..0x00000000]
    "Finalizer" daemon prio=1 tid=0x0809a690 nid=0x29c6 in Object.wait() [0x00406000..0x00406780]
    at java.lang.Object.wait(Native Method)
    - waiting on <0xca9db230> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
    - locked <0xca9db230> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
    at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
    "Reference Handler" daemon prio=1 tid=0x080987d0 nid=0x29c5 in Object.wait() [0x00311000..0x00311700]
    at java.lang.Object.wait(Native Method)
    - waiting on <0xca9db2b0> (a java.lang.ref.Reference$Lock)
    at java.lang.Object.wait(Object.java:474)
    at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
    - locked <0xca9db2b0> (a java.lang.ref.Reference$Lock)
    "VM Thread" prio=1 tid=0x08095d10 nid=0x29c4 runnable
    "VM Periodic Task Thread" prio=1 tid=0x080a1cf8 nid=0x29ca waiting on condition

    I've extracted the minimal code that shows this problem...
    You need to include AbsoluteLayout.jar in the classpath
    * Test code to show anomaly between Java1.5 and Java1.4
    * Select the first 5 elements then press "In" to move the elements to the right box.
    * Then press "out" to return them.
    * On 1.4 it happens instantaneously, on 1.5 it takes > 10 seconds !!!
    import java.awt.*;
    import java.util.*;
    import javax.swing.*;
    public class ES202_GUI extends javax.swing.JFrame {
        public ES202_GUI() {
            initComponents();
            vCodeVector      = new Vector ();
            LoadTestVector  ( vCodeVector );
            UpdateCodeList(  ); 
        private void initComponents() {
            java.awt.GridBagConstraints gridBagConstraints;
            IndustryPanel = new javax.swing.JPanel();
            jScrollPane2 = new javax.swing.JScrollPane();
            CodeSelect = new javax.swing.JList();
            jScrollPane1 = new javax.swing.JScrollPane();
            CodePool = new javax.swing.JList();
            BtnDeselectCode = new javax.swing.JButton();
            BtnSelectCode = new javax.swing.JButton();
            getContentPane().setLayout(new javax.swing.BoxLayout(getContentPane(), javax.swing.BoxLayout.X_AXIS));
            setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
            IndustryPanel.setLayout(new org.netbeans.lib.awtextra.AbsoluteLayout());
            IndustryPanel.setBorder(new javax.swing.border.TitledBorder(""));
            CodeSelect.setFont(new java.awt.Font("Default", 0, 12));
            CodeSelect.setModel(new DefaultListModel());
            jScrollPane2.setViewportView(CodeSelect);
            IndustryPanel.add(jScrollPane2, new org.netbeans.lib.awtextra.AbsoluteConstraints(420, 40, 350, 150));
            CodePool.setFont(new java.awt.Font("Default", 0, 12));
            CodePool.setModel(new DefaultListModel());
            jScrollPane1.setViewportView(CodePool);
            IndustryPanel.add(jScrollPane1, new org.netbeans.lib.awtextra.AbsoluteConstraints(10, 40, 350, 150));
            BtnDeselectCode.setText("Out");
            BtnDeselectCode.addActionListener(new java.awt.event.ActionListener() {
                public void actionPerformed(java.awt.event.ActionEvent evt) {
                    BtnDeselectCodeActionPerformed(evt);
            IndustryPanel.add(BtnDeselectCode, new org.netbeans.lib.awtextra.AbsoluteConstraints(360, 90, 60, 30));
            BtnSelectCode.setForeground(new java.awt.Color(0, 0, 128));
            BtnSelectCode.setText("In");
            BtnSelectCode.addActionListener(new java.awt.event.ActionListener() {
                public void actionPerformed(java.awt.event.ActionEvent evt) {
                    BtnSelectCodeActionPerformed(evt);
            IndustryPanel.add(BtnSelectCode, new org.netbeans.lib.awtextra.AbsoluteConstraints(360, 40, 60, 30));
            getContentPane().add(IndustryPanel);
            pack();
        private void BtnDeselectCodeActionPerformed(java.awt.event.ActionEvent evt) {                                               
            int Selections[] = CodeSelect.getSelectedIndices();
            Map     Next;
            if ( Selections.length > 0 )
                for( int i = 0; i < Selections.length; i++ ) {
                    Next = (Map)CodeSelect.getModel().getElementAt(Selections);
    ((Map)vCodeVector.get( Next.VectorIndex )).bSelected = false;
    else
    for(int i = 0; i < CodeSelect.getModel().getSize(); i++) {
    Next = (Map)CodeSelect.getModel().getElementAt(i);
    ((Map)vCodeVector.get(Next.VectorIndex)).bSelected = false;
    if ( Selections.length > 0 )
    for( int i = Selections.length-1; i >= 0 ; i-- ) {
    ((DefaultListModel)CodeSelect.getModel()).removeElementAt(Selections[i]);
    else
    ((DefaultListModel)CodeSelect.getModel()).removeAllElements();
    UpdateCodeList();
    private void BtnSelectCodeActionPerformed(java.awt.event.ActionEvent evt) {                                             
    int Selections[] = CodePool.getSelectedIndices();
    Map Next;
    if ( Selections.length > 0 )
    for( int i = 0; i < Selections.length; i++ ) {
    Next = (Map)CodePool.getModel().getElementAt(Selections[i]);
    ((DefaultListModel)CodeSelect.getModel()).addElement( Next );
    ((Map)vCodeVector.get( Next.VectorIndex )).bSelected = true;
    else /* If we are transferring everything */
    for(int i = 0; i < CodePool.getModel().getSize(); i++) {
    Next = (Map)CodePool.getModel().getElementAt(i);
    ((DefaultListModel)CodeSelect.getModel()).addElement( Next );
    ((Map)vCodeVector.get(Next.VectorIndex)).bSelected = true;
    if ( Selections.length > 0 )
    for( int i = Selections.length-1; i >= 0 ; i-- ) {
    ((DefaultListModel)CodePool.getModel()).removeElementAt(Selections[i]);
    else
    ((DefaultListModel)CodePool.getModel()).removeAllElements();
    /********************** Main Main Main Main Main
    * @param args the command line arguments
    public static void main(String args[]) {
    java.awt.EventQueue.invokeLater(new Runnable() {
    public void run() {
    new ES202_GUI().setVisible(true);
    // Update the NAICS Pool ListB
    private void UpdateCodeList() {
    Map Next;
    ((DefaultListModel)CodePool.getModel()).clear();
    for(int i=0; i < vCodeVector.size(); i++ ) {
    Next = (Map)(vCodeVector.get(i));
    ((DefaultListModel)CodePool.getModel()).addElement( Next );
    private void LoadTestVector( Vector vTestVector ) {
    Map record;
    int index = 0;
    for( int j=0; j < 2000; j++ ) {
    record = new Map();
    record.Code = new Integer( j );
    record.bDisplay = true; record.bSelected = false;
    record.VectorIndex = j;
    vCodeVector.add( record );
    private Vector <Map> vCodeVector;
    // Variables declaration - do not modify
    private javax.swing.JButton BtnDeselectCode;
    private javax.swing.JButton BtnSelectCode;
    private javax.swing.JList CodePool;
    private javax.swing.JList CodeSelect;
    private javax.swing.JPanel IndustryPanel;
    private javax.swing.JScrollPane jScrollPane1;
    private javax.swing.JScrollPane jScrollPane2;
    // End of variables declaration
    class Map {
    boolean bDisplay, bSelected;
    int Code, VectorIndex;
    public String toString() {
    return( String.format("%s", Code) );

  • Compile / run problems with netbeans 6 but not netbeans 6 beta 1 or 5.5

    When I compile my project in netbeans IDE 6.0 (Build 200711261600) 1.6.0_01; Java HotSpot(TM) Client VM 1.6.0_01-b06 i get quite often a "can not find symbol" error or during runtime a "netbeans 6 java.lang.NoClassDefFoundError" exception. also switching between F6 or ctrl-F5 mode can cause the problem to appear.
    Compiling again or clean build resolves it.
    However running the same project under netbeans 5.5 or 6 beta 1 never gives this problem.
    any hint what might be wrong? i looked and compared the project settings but can't see any difference, but I assume that the upgrade script must have changed something.

    <?xml version="1.0" encoding="UTF-8" ?>
    - <project name="BorderDemo" default="default" basedir=".">
    <import file="nbproject/build-impl.xml" />
    </project>This is 'build.xml' file. Check for 'project.xml' file in 'nbproject' folder. You will find it to be:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <project xmlns="http://www.netbeans.org/ns/project/1">
      <type>org.netbeans.modules.java.j2seproject</type>
    - <configuration>
    - <data xmlns="http://www.netbeans.org/ns/j2se-project/3">
      <name>BorderDemo</name>
      <minimum-ant-version>1.6.5</minimum-ant-version>
    - <source-roots>
      <root id="src.dir" />
      </source-roots>
      </data>
      </configuration>
      </project>Change it to:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <project xmlns="http://www.netbeans.org/ns/project/1">
      <type>org.netbeans.modules.java.j2seproject</type>
    - <configuration>
    - <data xmlns="http://www.netbeans.org/ns/j2se-project/3">
      <name>BorderDemo</name>
      <minimum-ant-version>1.6.5</minimum-ant-version>
    - <source-roots>
      <root id="src.dir" />
      </source-roots>
      <test-roots>
      <root id="test.src.dir" />
      </test-roots>
      </data>
      </configuration>
      </project>I hope it works.....
    thanks!

  • Problems with template working but not working...

    Ok, so I have a template I’m using in Dreamweaver 8
    – it’s working out well, with 3 editable regions, and
    I'm using a couple of stylesheets as well. Unfortunately
    something’s happened to the template though – I’m
    able to apply it to all my pages, but within DW itself the template
    is showing up as being unstylized.... you know how a page looks
    when it doesn’t have a stylesheet attached – that plain
    white and black? That’s how my template (and all my pages
    which use the template) looks
    *within* DW. If I open up the HTML files created from the
    template, they'll show up fine in Firefox or Safari - but from
    within Dreamweaver itself it's like it's not recognizing the
    stylesheet in a way. The path is there correctly - just some how my
    template is getting in the way :(
    Has this happened to anyone? Any ideas on how to rectify it?
    I've got a main stylesheet attached (globalstylesheet.css) but I've
    never had this problem before. Help!

    Hi Murray,
    thanks for posting. Yes, I usually just do a child from the
    template and cut and paste - would that be why the template got
    screwed up.
    This is really frustrating me, since the joy of DW is the
    ability to view the code AND the WYSIWYG panel at the same time -
    but I have no such luck right now... help!
    Here is my template:
    &lt;!DOCTYPE html PUBLIC &quot;-//W3C//DTD XHTML 1.0
    Strict//EN&quot; &quot;
    http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd&quot;&gt;
    &lt;html xmlns=&quot;
    http://www.w3.org/1999/xhtml&quot;&gt;
    &lt;head&gt;
    &lt;!-- TemplateBeginEditable
    name=&quot;doctitle&quot; --&gt;
    &lt;title&gt;&lt;/title&gt;
    &lt;!-- TemplateEndEditable --&gt;
    &lt;meta http-equiv=&quot;Content-Language&quot;
    content=&quot;English&quot; /&gt;
    &lt;meta http-equiv=&quot;Content-Type&quot;
    content=&quot;text/html; charset=UTF-8&quot; /&gt;
    &lt;link href=&quot;../globalstylesheet.css&quot;
    rel=&quot;stylesheet&quot;
    type=&quot;text/css&quot; /&gt;
    &lt;/head&gt;
    &lt;body&gt;
    &lt;div id=&quot;wrap&quot;&gt;
    &lt;div id=&quot;header&quot;&gt;
    &lt;h1&gt;Rachel M. Murray User Experience
    Design&lt;/h1&gt;
    &lt;h2&gt;at the intersection of business design and
    technology is good user experience&lt;/h2&gt;
    &lt;/div&gt;
    &lt;div id=&quot;navigation&quot;&gt;
    &lt;ul&gt;
    &lt;li&gt;&lt;a
    href=&quot;../welcome.html&quot;&gt;welcome&lt;/a&gt;&lt;/li&gt;
    &lt;li&gt;&lt;a
    href=&quot;../who.html&quot;&gt;who&lt;/a&gt;&lt;/li&gt;
    &lt;li&gt;&lt;a
    href=&quot;../work.html&quot;&gt;work&lt;/a&gt;&lt;/li&gt;
    &lt;li&gt;&lt;a
    href=&quot;../write.html&quot;&gt;write&lt;/a&gt;&lt;/li&gt;
    &lt;li&gt;&lt;a
    href=&quot;../sitemap.html&quot;&gt;where&lt;/a&gt;&lt;/li&gt;
    &lt;/ul&gt;
    &lt;/div&gt;
    &lt;div id=&quot;content&quot;&gt;
    &lt;div id=&quot;right&quot;&gt;&lt;!--
    TemplateBeginEditable name=&quot;body&quot; --&gt;
    &lt;!-- TemplateEndEditable
    --&gt;&lt;/div&gt;
    &lt;!-- TemplateBeginEditable
    name=&quot;leftnav&quot; --&gt;
    &lt;div id=&quot;left&quot;&gt;
    &lt;div class=&quot;menutop&quot;&gt;
    &lt;/div&gt;
    &lt;div class=&quot;menumiddle&quot;&gt;
    &lt;/div&gt;
    &lt;div class=&quot;menubottom&quot;&gt;
    &lt;/div&gt;
    &lt;/div&gt;
    &lt;!-- TemplateEndEditable --&gt;
    &lt;div style=&quot;clear:both;&quot;&gt;
    &lt;/div&gt;
    &lt;/div&gt;
    &lt;div id=&quot;footer&quot;&gt;
    &amp;nbsp;&amp;nbsp;&amp;nbsp;&lt;img
    src=&quot;../images/tinylogo.gif&quot; alt=&quot;tiny
    logo&quot; width=&quot;16&quot;
    height=&quot;18&quot; align=&quot;top&quot;
    /&gt; &lt;span
    class=&quot;footertext&quot;&gt;Copyright
    &amp;copy; 2007 and beyond Rachel M. Murray User Experience
    Design. All Rights Reserved.
    &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp ;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp ;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp ;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp ;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;Revised
    from a design by &lt;a href=&quot;
    http://www.minimalistic-design.net/&quot;
    target=&quot;_blank&quot;&gt;Minimalistic
    Designs&lt;/a&gt;&lt;/span&gt;&lt;/div&gt;
    &lt;/div&gt;
    &lt;/body&gt;
    &lt;/html&gt;
    any help is appreciated - thanks...

  • Printing Problems with PS CC, but not CS5 or CS6

    When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
    I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
    A couple things I noticed:
    In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).
    In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.
    When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).
    Any advice or insight would be appreciated.

    I see the new/hacked AppColorMatchingInfo.xml file includes PS CC, v14.0.0.221
    Here's a clip from the info.plist file inside PS CC:
    </array>
              <key>CFBundleExecutable</key>
              <string>Adobe Photoshop CC</string>
              <key>CFBundleGetInfoString</key>
              <string>14.0 (20130423.r.221 2013/04/23:23:00:00)</string>
              <key>CFBundleIconFile</key>
              <string>PS_AppIcon.icns</string>
              <key>CFBundleIdentifier</key>
              <string>com.adobe.Photoshop</string>
              <key>CFBundleInfoDictionaryVersion</key>
              <string>6.0</string>
              <key>CFBundleLongVersionString</key>
              <string>14.0 (20130423.r.221 2013/04/23:23:00:00)</string>
              <key>CFBundleName</key>
              <string>Photoshop</string>
              <key>CFBundlePackageType</key>
              <string>APPL</string>
              <key>CFBundleShortVersionString</key>
              <string>14.0.0</string>
              <key>CFBundleSignature</key>
              <string>8BIM</string>
              <key>CFBundleVersion</key>
              <string>14.0.0.221</string>
              <key>CGDisableCoalescedUpdates</key>
              <true/>
              <key>CSResourcesFileMapped</key>
              <false/>
              <key>DTCompiler</key>
              <string>com.apple.compilers.llvm.clang.1_0</string>
              <key>DTPlatformBuild</key>
              <string>4E2002</string>
              <key>DTPlatformVersion</key>
              <string>GM</string>
              <key>DTSDKBuild</key>
              <string>11D50a</string>
              <key>DTSDKName</key>
              <string>macosx10.7</string>
              <key>DTXcode</key>
              <string>0432</string>
              <key>DTXcodeBuild</key>
              <string>4E2002</string>
              <key>LSMinimumSystemVersion</key>
              <string>10.6.0</string>
              <key>NSAppleScriptEnabled</key>
              <string>Yes</string>
              <key>NSHumanReadableCopyright</key>
              <string>Copyright  © 1990-2013 Adobe Systems Incorporated</string>
              <key>NSPrincipalClass</key>
              <string>PhotoshopNSApplication</string>
              <key>UIDisallowUserKeyboardShortcuts</key>
              <true/>

  • How do I set up a googlemail account on my mac? Note not a gmail account, but a googlemail account.

    how do I set up a googlemail account on my mac? It seems to recognise gmail accounts but not googlemail accounts. I have a googlemail account not a gmail account and I don't know how to set this up. A gmail account is very straight forward. Help please

    if it keeps asking for the password again just write "0000", add the controller to your favorites, close bluetooth before asked for a password again, and the open bluetooth again

  • IMovie works in Test account but not in main user account

    I have been having issues with iMovie such as lag time and trailers not playing back properly in preview mode. I created a new user account to see if it was isolated to my own user and sure enough the problems went away and iMovie is working smoothly.
    So what could be causing the issue on my user account? I tried to usual suspects: repair permissions, delete preferences, etc., but nothing helped.
    Any ideas?
    Thanks,
    Stephen

    Wondering if anyone has any thoughts on this issue? I can't figure out why it would work on a test account but not on my main account.
    Thanks!
    Stephen
    Message was edited by: El Gaucho

  • Safari (7.0.1) is non-responsive (spinning pinwheel) upon start up.  It will work in temp user account but not in my main user acct.  I tried reinstall via comman-r prompt on start up but the problem persists.  Any suggestion for reinstall or repair?

    Safari is non-responsive after intitial start up.  Before it can load the homepage (google), it will hang and give a perpetual pinwheel until I force quit the program.  Safari works in temporary user account but not in my primary user account.  I have reinstalled osx via the command-r upon start up and the problem still persists.  Any suggestions on how to reinstall or repair safari?

    Thanks for thinking about my problem. I've already experimented with creating a new user, a co-administrator. The programs don't crash when that account is running, just as they don't crash when the guest-user's account runs. So it seems that the problem is limited to the default user's account, which is the one that was running when I installed the updates to the OS and the firmware. Another clue is that the programs that crash as soon as they are launched are *probably* the ones that were open at that time in that account. Yet deleting Saved Application States does not keep the programs from crashing when next launched.
    So the mystery continues, but these additional facts will help with the diagnosis, I hope.
    Thanks again for your suggestion.
    Gordon

  • Since Febuary 14th, 2013 we are unable to send and recieve email using our hotmail account on our Iphone. We can get our email by loggin in with our computer but not using our Iphone.

    Since Febuary 14th, 2013 we are unable to send and recieve email using our hotmail account on our Iphone. We can get our email by loggin in with our computer but not using our Iphone.

    Hotmail has been discontinued for some time now.  See:
    http://windows.microsoft.com/en-us/windows/outlook/auto-upgrade-outlook-faq

  • When I send an email with picture attachment it is received by my gmail account but not received by applel mail. What gives?

    Recently installed Mavericks. Now when I send an email with picture attachment it is received by my gmail account but not received by applel mail. What gives?

    Hi Bigt101,
    It will be great, if you can provide me with the following info.
    which Model printer are you using.
    Are you registered to the e-print center.
    What email client are you using.
    Thanks
    Josh.C
    Click on the BLUE KUDOS button on the left to say "Thanks"
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Why does GarageBand audio work for guest user but not my account?

    Hello, I have a 15-inch MacBook Pro (2.2 GHz Intel Core i7, 4GB 1333 MHz DDR3) from late 2011 that I bought brand new in 2012. I'm running OS X Mavericks 10.9.4 and my MacBook has 500 GB of storage.
    About a month or two ago I tried to download the new GarageBand (10.0.2) but I had trouble completing the loops download. The download would stop halfway through because of a network error. So last week I decided to try to download it again, and I was able to do so after reading some discussions about the issue. I successfully completed the download in safety mode and then I restarted my MacBook. At this point I was able to open GarageBand 10.0.2 and create a new project. Unfortunately, there was no audio coming through the output and sound bar for the various audio components in GarageBand. I had no audio when previewing the loops or playing it back in an audio track. I didn't really test anything else out because I figured I needed to fix this problem first. I have read many discussion boards about audio problems with GarageBand. I have already made sure everything is set properly in the GarageBand preferences and the audio preferences in system preferences. I've tried restarting GarageBand and restarting the computer.
    This evening I found a discussion from the username icewhatice and they seemed to have had my exact problem. I'm not sure that I found the answer on this discussion though. For reference, this is what icewhatice posted: "I have no audio coming from Garageband 10.0.2. Downloaded it on Saturday and have spent the last two days trying to figure out why it won't work. I'm using a macbook pro with an Alesis QX49. GB registers keyboard when I plug it in but no sound whatsoever, not even from the onscreen keyboard. It seems to read the keyboard as if I play a C chord, it appears in the display. I've done all the obvious stuff like check preferences, restart, I've deleted and downloaded new GB several times and always with same result. Actually, it took me about four attempts to download it in the first place as I was getting an internet connection error message right at the end of the download, and I see others have had that problem. Managed to solve that by downloading in safe mode but now the no sound thing is driving me absolutely crazy because I can't play my keyboard!!!!! Also, worth noting that there is no audio level being read anywhere, I believe in the new version this appears in the volume control at the top. I've also looked into it potentially being a problem with my keyboard and it possibly needing an update but can't find any difinitive answer for that anywhere. I've stopped looking into that because the on screen keyboard doesn't even work - if that worked then I would know at least GB works and it's something to do with the keyboard. So, I am at a complete loss. If anyone has any ideas about why this is happening or what I could do to solve then I would be very grateful."
    After reading this, I realized that I am unable to create new tracks, and I realized that I have the same problems with old projects saved from the last version of GarageBand I had. I have not tried to download GarageBand again since it did not work for icewhatice. léonie ended this post by saying: "Something is certainly wrong - either the current project, some settings in your user account, or the downloaded GarageBand version. Or incompatible software may be interfering. If a new project does not work, try to test by logging into a different user account, for example the "Guest User" account. Create a new project using this account. Does GarageBand work better from this account?  Then we will need to troubleshoot your preferences."
    I have tried this and started a new GarageBand project in the "Guest User" account. GarageBand was working fine in the "Guest User" account and all of the audio was working properly. Does anyone know how I should troubleshoot my preferences?

    If an application is working in a different account, but not in your regular account,try t find out, what you configured differently in your own account, for example start-up items or preference panes you are using, applications and other helper tools, that are only installed for your regular account. As a first guess, remove GarageBands preference files from the user library in your Home folder.
    But you will have to reset all settings you did in the GarageBand preferences dialog. And GarageBand will not remember the last project. You'll have to find the file manually.
    Remove these files from your User Library to a folder on your Desktop:
    ~/Library/Containers/com.apple.garageband10/
    ~/Library/Preferences/com.apple.garageband.plist
    ~/Library/Caches/garageband
    Quit GarageBand, then remove the files to a folder on the Desktop and restart the computer, before trying again to open GarageBand.
    You user library may still be hidden, as is the default in Mavericks: To open your hidden user library:
    Select the "Home" folder icon (the little house)  in the Finder's sidebar and press the key combination ⌘J to open the "view options".
    Enable "Show Library Folder".
    Then open the Home folder and open the Library folder inside and navigate to the Preferences, Caches, or Containers folder. Remove these folders completely - don't leave anything inside:  ~/Library/Containers/com.apple.garageband10/,
    ~/Library/Caches/garageband  .

  • Form prints from one account, but not from other on same computer

    With Brother 5040 printer and latest driver.
    I have a form in a Panorama V db file that will print properly from my "Test" account, but not my main account on the same machine.
    When I try to print this form from my main account I get a the intitial Print Dialog, then brief flash of the preparing to print. But it never makes it to the printer. It was working fine up until yesterday. I made no system level changes.
    This is a word processing form in PanV. Other forms in the same file print fine. A word processing form in a different file also has developed the problem. Obviously, there is some connection to Panorama, still looking for troubleshooting solutions.
    Martin

    Look for a problem in your user library. Try removing printing preference and other printing-related files from the library, as well as the Panorama plist. Then log out and back in, and see if it prints properly.

Maybe you are looking for